Controlled Stiffness of Direct-Write, Near-Field Electrospun Gelatin Fibers Generates Differences in Tenocyte Morphology and Gene Expression.

Tendinopathy is a leading cause of mobility issues. Currently, the cell-matrix interactions involved in the development of tendinopathy are not fully understood. In vitro tendon models provide a unique tool for addressing this knowledge gap as they permit fine control over biochemical, micromechanical, and structural aspects of the local environment to explore cell-matrix interactions. In this study, direct-write, near-field electrospinning of gelatin solution was implemented to fabricate micron-scale fibrous scaffolds that mimic native collagen fiber size and orientation. The stiffness of these fibrous scaffolds was found to be controllable between 1 MPa and 8 MPa using different crosslinking methods (EDC, DHT, DHT+EDC) or through altering the duration of crosslinking with EDC (1 h to 24 h). EDC crosslinking provided the greatest fiber stability, surviving up to 3 weeks in vitro. Differences in stiffness resulted in phenotypic changes for equine tenocytes with low stiffness fibers (∼1 MPa) promoting an elongated nuclear aspect ratio while those on high stiffness fibers (∼8 MPa) were rounded. High stiffness fibers resulted in the upregulation of matrix metalloproteinase (MMPs) and proteoglycans (possible indicators for tendinopathy) relative to low stiffness fibers. These results demonstrate the feasibility of direct-written gelatin scaffolds as tendon in vitro models and provide evidence that matrix mechanical properties may be crucial factors in cell-matrix interactions during tendinopathy formation.

Microparticle Hydrogel Material Properties Emerge from Mixing-Induced Homogenization in a Poly(ethylene glycol) and Dextran Aqueous Two-Phase System.

Polymer-polymer aqueous two-phase systems (ATPSs) are attractive for microgel synthesis, but given the complexity of phase separation, predicting microgel material properties from ATPS formulations is not trivial. The objective of this study was to determine how the phase diagram of a poly(ethylene glycol) (PEG) and dextran ATPS is related to the material properties of PEG microgel products. PEG-dextran ATPSs were prepared from four-arm 20 kDa PEG-norbornene and 40 kDa dextran in phosphate buffered saline (PBS), and the phase diagram was constructed. PEG microgels were synthesized from five ATPS formulations using an oligopeptide cross-linker and thiol-norbornene photochemistry. Thermogravimetric analysis (TGA) revealed that the polymer concentration of microgel pellets linearly correlates with the average concentration of PEG in the ATPS rather than the separated phase compositions, as determined from the phase diagram. Atomic force microscopy (AFM) and bulk rheology studies demonstrated that the mechanical properties of microgels rely on both the average concentration of PEG in the ATPS and the ATPS volume ratio as determined from the phase diagram. These findings suggest that PEG-dextran ATPSs undergo homogenization upon mixing, which principally determines the material properties of the microgels upon gelation.

Effects of sterilization methods on gelatin methacryloyl hydrogel properties and macrophage gene expressionin vitro.

To assure the long-term safety and functional performance after implantation, it is of critical importance to completely sterilize a biomaterial implant. Ineffective sterilization can cause severe inflammation and infection at the implant site, leading to detrimental events of morbidity and even mortality. Macrophages are pivotal players in the inflammatory and foreign body response after implanting a biomaterial in the body. However, the relationship between the sterilization procedure and macrophage response has not been established. In this study, three commonly used sterilization methods, including autoclaving, ethylene oxide gas and ethanol treatment, were used to sterilize a gelatin methacryloyl hydrogel. The impacts of different sterilization methods on the structure and physical properties of the hydrogel were compared. Macrophage responses to the sterilized hydrogel were analyzed based on their morphology, viability andin vitrogene expression. It was found that the sterilization methods only marginally altered the hydrogel morphology, swelling behavior and elastic modulus, but significantly impacted macrophage gene expression within 48 h and over 7 din vitro. Therefore, when selecting sterilization methods for GelMA hydrogel, not only the sterility and hydrogel properties, such as material destruction and degradation caused by temperature and moisture, should be taken into consideration, but also the cellular responses to the sterilized material which could be substantially different.

Inhalable dry powder mRNA vaccines based on extracellular vesicles.

Respiratory diseases are a global burden, with millions of deaths attributed to pulmonary illnesses and dysfunctions. Therapeutics have been developed, but they present major limitations regarding pulmonary bioavailability and product stability. To circumvent such limitations, we developed room-temperature-stable inhalable lung-derived extracellular vesicles or exosomes (Lung-Exos) as mRNA and protein drug carriers. Compared with standard synthetic nanoparticle liposomes (Lipos), Lung-Exos exhibited superior distribution to the bronchioles and parenchyma and are deliverable to the lungs of rodents and nonhuman primates (NHPs) by dry powder inhalation. In a vaccine application, severe acute respiratory coronavirus 2 (SARS-CoV-2) spike (S) protein encoding mRNA-loaded Lung-Exos (S-Exos) elicited greater immunoglobulin G (IgG) and secretory IgA (SIgA) responses than its loaded liposome (S-Lipo) counterpart. Importantly, S-Exos remained functional at room-temperature storage for one month. Our results suggest that extracellular vesicles can serve as an inhaled mRNA drug-delivery system that is superior to synthetic liposomes.

Fibrin-Based Biomaterial Systems to Enhance Anterior Cruciate Ligament Healing.

Anterior cruciate ligament (ACL) tears are a common and potentially career-ending injury, particularly for athletes and soldiers. Partial and complete ruptures of this ligament cause instability in the knee, and the ACL does not have the capacity for healing due, in part, to its position within the highly thrombolytic synovial fluid environment of the knee joint. Traditional methods of ACL reconstruction, such as graft replacement with attached bone anchors for bone integration, restore stability, but do not prevent the development of post-traumatic osteoarthritis. To enhance therapeutic treatment options, novel fibrin-based technologies and repair techniques have been recently explored and show promise for improved patient outcomes. Through modification of existing surgical methods, such as the use of fibrin glues incorporating growth factors and cells and the implementation of scaffolds containing platelet-rich plasma, platelet-rich fibrin, and other blood derivatives, surgeons are attempting to overcome the shortcomings of traditional treatments. This mini-review will detail current efforts using fibrin-based treatments and discuss opportunities to further enhance ACL healing.

Measuring problem prescription opioid use among patients receiving long-term opioid analgesic treatment: development and evaluation of an algorithm for use in EHR and claims data.

Objective: Opioid surveillance in response to the opioid epidemic will benefit from scalable, automated algorithms for identifying patients with clinically documented signs of problem prescription opioid use. Existing algorithms lack accuracy. We sought to develop a high-sensitivity, high-specificity classification algorithm based on widely available structured health data to identify patients receiving chronic extended-release/long-acting (ER/LA) therapy with evidence of problem use to support subsequent epidemiologic investigations. Methods: Outpatient medical records of a probability sample of 2,000 Kaiser Permanente Washington patients receiving ≥60 days' supply of ER/LA opioids in a 90-day period from 1 January 2006 to 30 June 2015 were manually reviewed to determine the presence of clinically documented signs of problem use and used as a reference standard for algorithm development. Using 1,400 patients as training data, we constructed candidate predictors from demographic, enrollment, encounter, diagnosis, procedure, and medication data extracted from medical claims records or the equivalent from electronic health record (EHR) systems, and we used adaptive least absolute shrinkage and selection operator (LASSO) regression to develop a model. We evaluated this model in a comparable 600-patient validation set. We compared this model to ICD-9 diagnostic codes for opioid abuse, dependence, and poisoning. This study was registered with ClinicalTrials.gov as study NCT02667262 on 28 January 2016. Results: We operationalized 1,126 potential predictors characterizing patient demographics, procedures, diagnoses, timing, dose, and location of medication dispensing. The final model incorporating 53 predictors had a sensitivity of 0.582 at positive predictive value (PPV) of 0.572. ICD-9 codes for opioid abuse, dependence, and poisoning had a sensitivity of 0.390 at PPV of 0.599 in the same cohort. Conclusions: Scalable methods using widely available structured EHR/claims data to accurately identify problem opioid use among patients receiving long-term ER/LA therapy were unsuccessful. This approach may be useful for identifying patients needing clinical evaluation.

Development of novel microenvironments for promoting enhanced wound healing.

PURPOSE OF REVIEW: Nonhealing wounds are a significant issue facing the healthcare industry. Materials that modulate the wound microenvironment have the potential to improve healing outcomes. RECENT FINDINGS: A variety of acellular and cellular scaffolds have been developed for regulating the wound microenvironment, including materials for controlled release of antimicrobials and growth factors, materials with inherent immunomodulative properties, and novel colloidal-based scaffolds. Scaffold construction methods include electrospinning, 3D printing, decellularization of extracellular matrix, or a combination of techniques. Material application methods include layering or injecting at the wound site. SUMMARY: Though these techniques show promise for repairing wounds, all material strategies thus far struggle to induce regeneration of features such as sweat glands and hair follicles. Nonetheless, innovative technologies currently in the research phase may facilitate future attainment of these features. Novel methods and materials are constantly arising for the development of microenvironments for enhanced wound healing.