Direct demonstration of lipid phosphorylation in the lipid bilayer of the biomimetic bicontinuous cubic phase using the confined enzyme lipid A phosphoethanolamine transferase.

Retention of amphiphilic protein activity within the lipid bilayer membrane of the nanostructured biomimetic bicontinuous cubic phase is crucial for applications utilizing these hybrid protein-lipid self-assembly materials, such as in meso membrane protein crystallization and drug delivery. Previous work, mainly on soluble and membrane-associated enzymes, has shown that enzyme activity may be modified when immobilized, including membrane bound enzymes. The effect on activity may be even greater for amphiphilic enzymes with a large hydrophilic domain, such as the Neisserial enzyme lipid A phosphoethanolamine transferase (EptA). Encapsulation within the biomimetic but non-endogenous lipid bilayer membrane environment may modify the enzyme conformation, while confinement of the large hydrophilic domain with the nanoscale water channels of a continuous lipid bilayer structure may prevent full function of this enzyme. Herein we show that NmEptA remains active despite encapsulation within a nanostructured bicontinuous cubic phase. Full transfer of the phosphoethanolamine (PEA) group from a 1,2-dioleoyl-glycero-phosphoethanolamine (DOPE) doped lipid to monoolein (MO), which makes up the bicontinuous cubic phase, is shown. The reaction was found to be non-specific to the alkyl chain identity. The observed rate of enzyme activity is similar to other membrane bound enzymes, with complete transfer of the PEA group occurring in vitro, under the conditions studied, over a 24 hour timescale.

Exploring the in meso crystallization mechanism by characterizing the lipid mesophase microenvironment during the growth of single transmembrane α-helical peptide crystals.

The proposed mechanism for in meso crystallization of transmembrane proteins suggests that a protein or peptide is initially uniformly dispersed in the lipid self-assembly cubic phase but that crystals grow from a local lamellar phase, which acts as a conduit between the crystal and the bulk cubic phase. However, there is very limited experimental evidence for this theory. We have developed protocols to investigate the lipid mesophase microenvironment during crystal growth using standard procedures readily available in crystallography laboratories. This technique was used to characterize the microenvironment during crystal growth of the DAP12-TM peptide using synchrotron small angle X-ray scattering (SAXS) with a micro-sized X-ray beam. Crystal growth was found to occur from the gyroid cubic mesophase. For one in four crystals, a highly oriented local lamellar phase was observed, providing supporting evidence for the proposed mechanism for in meso crystallization. A new observation of this study was that we can differentiate diffraction peaks from crystals grown in meso, from peaks originating from the surrounding lipid matrix, potentially opening up the possibility of high-throughput SAXS analysis of in meso grown crystals.This article is part of the themed issue 'Soft interfacial materials: from fundamentals to formulation'.

Rational engineering of a mesohalophilic carbonic anhydrase to an extreme halotolerant biocatalyst.

Enzymes expressed by highly salt-tolerant organisms show many modifications compared with salt-affected counterparts including biased amino acid and lower α-helix content, lower solvent accessibility and negative surface charge. Here, we show that halotolerance can be generated in an enzyme solely by modifying surface residues. Rational design of carbonic anhydrase II is undertaken in three stages replacing 18 residues in total, crystal structures confirm changes are confined to surface residues. Catalytic activities and thermal unfolding temperatures of the designed enzymes increase at high salt concentrations demonstrating their shift to halotolerance, whereas the opposite response is found in the wild-type enzyme. Molecular dynamics calculations reveal a key role for sodium ions in increasing halotolerant enzyme stability largely through interactions with the highly ordered first Na(+) hydration shell. For the first time, an approach to generate extreme halotolerance, a trait with broad application in industrial biocatalysis, in a wild-type enzyme is demonstrated.

Formulation screening by differential scanning fluorimetry: how often does it work?

There is strong evidence to suggest that a protein sample needs to be well folded and uniform in order to form protein crystals, and it is accepted knowledge that the formulation can have profound effects on the behaviour of the protein sample. The technique of differential scanning fluorimetry (DSF) is a very accessible method to determine protein stability as a function of the formulation chemistry and the temperature. A diverse set of 252 soluble protein samples was subjected to a standard formulation-screening protocol using DSF. Automated analysis of the DSF results suggest that in over 35% of cases buffer screening significantly increases the stability of the protein sample. Of the 28 standard formulations tested, three stood out as being statistically better than the others: these included a formulation containing the buffer citrate, long known to be `protein friendly'; bis-tris and ADA were also identified as being very useful buffers in protein formulations.

Structural and biochemical analyses of a Clostridium perfringens sortase D transpeptidase.

The assembly and anchorage of various pathogenic proteins on the surface of Gram-positive bacteria is mediated by the sortase family of enzymes. These cysteine transpeptidases catalyze a unique sorting signal motif located at the C-terminus of their target substrate and promote the covalent attachment of these proteins onto an amino nucleophile located on another protein or on the bacterial cell wall. Each of the six distinct classes of sortases displays a unique biological role, with sequential activation of multiple sortases often observed in many Gram-positive bacteria to decorate their peptidoglycans. Less is known about the members of the class D family of sortases (SrtD), but they have a suggested role in spore formation in an oxygen-limiting environment. Here, the crystal structure of the SrtD enzyme from Clostridium perfringens was determined at 1.99 Šresolution. Comparative analysis of the C. perfringens SrtD structure reveals the typical eight-stranded ß-barrel fold observed in all other known sortases, along with the conserved catalytic triad consisting of cysteine, histidine and arginine residues. Biochemical approaches further reveal the specifics of the SrtD catalytic activity in vitro, with a significant preference for the LPQTGS sorting motif. Additionally, the catalytic activity of SrtD is most efficient at 316 K and can be further improved in the presence of magnesium cations. Since C. perfringens spores are heat-resistant and lead to foodborne illnesses, characterization of the spore-promoting sortase SrtD may lead to the development of new antimicrobial agents.

Transmembrane Complexes of DAP12 Crystallized in Lipid Membranes Provide Insights into Control of Oligomerization in Immunoreceptor Assembly.

The membrane-spanning α helices of single-pass receptors play crucial roles in stabilizing oligomeric structures and transducing biochemical signals across the membrane. Probing intermolecular transmembrane interactions in single-pass receptors presents unique challenges, reflected in a gross underrepresentation of their membrane-embedded domains in structural databases. Here, we present two high-resolution structures of transmembrane assemblies from a eukaryotic single-pass protein crystallized in a lipidic membrane environment. Trimeric and tetrameric structures of the immunoreceptor signaling module DAP12, determined to 1.77-Å and 2.14-Å resolution, respectively, are organized by the same polar surfaces that govern intramembrane assembly with client receptors. We demonstrate that, in addition to the well-studied dimeric form, these trimeric and tetrameric structures are made in cells, and their formation is competitive with receptor association in the ER. The polar transmembrane sequences therefore act as primary determinants of oligomerization specificity through interplay between charge shielding and sequestration of polar surfaces within helix interfaces.

Meltdown: A Tool to Help in the Interpretation of Thermal Melt Curves Acquired by Differential Scanning Fluorimetry.

The output of a differential scanning fluorimetry (DSF) assay is a series of melt curves, which need to be interpreted to get value from the assay. An application that translates raw thermal melt curve data into more easily assimilated knowledge is described. This program, called "Meltdown," conducts four main activities--control checks, curve normalization, outlier rejection, and melt temperature (T(m)) estimation--and performs optimally in the presence of triplicate (or higher) sample data. The final output is a report that summarizes the results of a DSF experiment. The goal of Meltdown is not to replace human analysis of the raw fluorescence data but to provide a meaningful and comprehensive interpretation of the data to make this useful experimental technique accessible to inexperienced users, as well as providing a starting point for detailed analyses by more experienced users.

DNA melting and genotoxicity induced by silver nanoparticles and graphene.

We have revealed a connection between DNA-nanoparticle (NP) binding and in vitro DNA damage induced by citrate- and branched polyethylenimine-coated silver nanoparticles (c-AgNPs and b-AgNPs) as well as graphene oxide (GO) nanosheets. All three types of nanostructures triggered an early onset of DNA melting, where the extent of the melting point shift depends upon both the type and concentration of the NPs. Specifically, at a DNA/NP weight ratio of 1.1/1, the melting temperature of lambda DNA dropped from 94 °C down to 76 °C, 60 °C, and room temperature for GO, c-AgNPs and b-AgNPs, respectively. Consistently, dynamic light scattering revealed that the largest changes in DNA hydrodynamic size were also associated with the binding of b-AgNPs. Upon introduction to cells, b-AgNPs also exhibited the highest cytotoxicity, at the half-maximal inhibitory (IC50) concentrations of 3.2, 2.9, and 5.2 mg/L for B and T-lymphocyte cell lines and primary lymphocytes, compared to the values of 13.4, 12.2, and 12.5 mg/L for c-AgNPs and 331, 251, and 120 mg/L for GO nanosheets, respectively. At cytotoxic concentrations, all NPs elicited elevated genotoxicities via the increased number of micronuclei in the lymphocyte cells. However, b-AgNPs also induced micronuclei at subtoxic concentrations starting from 0.1 mg/L, likely due to their stronger cellular adhesion and internalization, as well as their subsequent interference with normal DNA synthesis or chromosome segregation during the cell cycle. This study facilitates our understanding of the effects of NP chemical composition, surface charge, and morphology on DNA stability and genotoxicity, with implications ranging from nanotoxicology to nanobiotechnology and nanomedicine.

Thermostability and reversibility of silver nanoparticle-protein binding.

The interactions between nanoparticles (NPs) and proteins in living systems are a precursor to the formation of a NP-protein "corona" that underlies cellular and organism responses to nanomaterials. However, the thermodynamic properties and reversibility of NP-protein interactions have rarely been examined. Using an automated, high-throughput and temperature-controlled dynamic light scattering (DLS) technique we observed a distinct hysteresis in the hydrodynamic radius of branched polyethyleneimine (BPEI) coated-silver nanoparticles (bAgNPs) exposed to like-charged lysozyme during the processes of heating and cooling, in contrast to the irreversible interactions between bAgNPs and oppositely charged alpha lactalbumin (ALact). Our discrete molecular dynamics (DMD) simulations offered a new molecular insight into the differential structure, dynamics and thermodynamics of bAgNPs binding with the two protein homologs and further revealed the different roles of the capping agents of citrate and BPEI in NP-protein interactions. This study facilitates our understanding of the transformation of nanomaterials in living systems, whose implications range from the field study of nanotoxicology to nanomaterials synthesis, nanobiotechnology and nanomedicine.

Crystallization reports are the backbone of Acta Cryst. F, but do they have any spine?

Crystallization of macromolecules is famously difficult. By knowing what has worked for others, researchers can ease the process, both in the case where the protein has already been crystallized and in the situation where more general guidelines are needed. The 264 crystallization communications published in Acta Crystallographica Section F in 2012 have been reviewed, and from this analysis some information about trends in crystallization has been gleaned. More importantly, it was found that there are several ways in which the utility of these communications could be increased: to make each individual paper a more complete crystallization record; and to provide a means for taking a snapshot of what the current `best practices' are in the field.

High-throughput thermal scanning for protein stability: making a good technique more robust.

We present a high-throughput approach to help define experimental formulations that enhance protein stability, which is based on differential scanning fluorimetry (DSF). The method involves defining the thermal stability of a protein against a screen of 13 buffer systems, systematically sampling pH from 5.0 to 9.0 at high and low salt concentrations, using both redundancy and extensive controls to make the method robust. The screen allows rapid determination of a suitable base formulation for protein samples, and is particularly useful for difficult samples: those that are rapidly degraded or cannot be sufficiently concentrated for downstream analyses. Data obtained from three samples in this assay illustrate the vastly different values for thermal stability that can be obtained from different formulations. This approach is simple to interpret and reliable enough that it has been implemented as a service through the Collaborative Crystallisation Centre (C3).

Some practical guidelines for UV imaging in the protein crystallization laboratory.

High-throughput imaging of protein crystallization experiments with ultraviolet (UV) light has recently become commercially available and can enable crystallographers to differentiate between crystals of protein and those of salt, as the visualization of protein crystals is based on intrinsic tryptophan fluorescence. Unfortunately, UV imaging is not a panacea, as some protein crystals will not fluoresce under UV excitation and some salt crystals are UV-fluorescently active. As a new technology, there is little experience within the general community on how to use this technology effectively and what caveats to look out for. Here, an attempt is made to identify some of the common problems that may arise using UV-imaging technology by examining test proteins, common crystallization reagents and a range of proteins by assessing their UV-Vis absorbance spectra. Some pointers are offered as to which systems may not be appropriate for this methodology.

High-throughput production and structural characterization of libraries of self-assembly lipidic cubic phase materials.

A protocol is presented for the high-throughput (HT) production of lyotropic liquid crystalline phases from libraries of lipids and lipid mixtures using standard liquid dispensing robotics, implementing methods that circumvent the problems traditionally associated with handling the highly viscous cubic phase. In addition, the ability to structurally characterize lipidic phases and assess functionality for membrane proteins contained within cubic phases, in a HT manner, is demonstrated. The techniques are combined and exemplified using the application of membrane protein crystallization within lipidic cubic phases.

Characterization of starch by size-exclusion chromatography: the limitations imposed by shear scission.

Shear degradation is examined in size-exclusion chromatography (SEC, or GPC) of native starch in an eluent system (dimethylsulfoxide and LiBr) in which the starch is completely dissolved. Changes in apparent size distribution with flow rate suggested extensive shear scission of the amylopectin region. For smaller sizes, largely amylose, there was no significant scission for lower flow rates. Quantification by analogy to shear breakup of dispersed droplets gives a scaling law for conditions for shear scission of highly branched polymers. This shows both that it is impossible to obtain reliable size distributions for the amylopectin component of starch using current SEC technology and also that the amylose region is not significantly polluted by degraded amylopectin for lower flow rates. Hence, the complete size distribution of starch can only be obtained with SEC for smaller sizes (largely amylose), plus a size-separation technique with very low shear, such as field-flow fractionation, for the amylopectin region.