RESUMO
A series of titanium alkoxides ([Ti(OR)4] (OR = OCH(CH3)2 (OPri), OC(CH3)3 (OBut), and OCH2C(CH3)3 (ONep)) were modified with a set of substituted hydroxyl-benzaldehydes [HO-BzA-Lx: x = 1, 2-hydroxybenzaldehyde (L = H), 2-hydroxy-3-methoxybenzaldehyde (OMe-3), 5-bromo-2-hydroxybenzaldehyde (Br-5), 2-hydroxy-5-nitrobenzaldehyde (NO2-5); x = 2, 3,5-di-tert-butyl-2-hydroxybenzaldehyde (But-3,5), 2-hydroxy-3,5-diiodobenzaldehyde (I-3,5)] in pyridine (py). Instead of the expected simple substitution, each of the HO-BzA-Lx modifiers were reduced to their respective diol [(py)(OR)2Ti(κ2(O,µ-O')(OC6H4-x(CH2O)-2)(L)x] (OR = OPri, x = 1, L = H (1a), OMe-3 (2a), Br-5 (3a·py), NO2-5 (4a·4py); x = 2, But-3,5 (5a), I-3,5 (6a), ONep; x = 1, L = H (1b), OMe-3 (2b), Br-5 (3b·py), NO2-5 (4b); x = 2, But-3,5 (5b), I-3,5 (6b·py)), as identified by single crystal X-ray studies. The 1H NMR spectral data were complex at room temperature but simplified at high temperatures (70 °C). Diffusion ordered spectroscopy (DOSY) NMR experiments indicated that 2a maintained the dinuclear structure in a solution independent of the temperature, whereas 2b appears to be monomeric over the same temperature range. On the basis of additional NMR studies, the mechanism of the reduction of the HO-BzA-Lx to the dioxide ligand was thought to occur by a Meerwein-Pondorf-Verley (MPV) mechanism. The structures of 1a-6b appear to be the intermediate dioxide products of the MPV reduction, which became "trapped" by the Lewis basic solvate.
RESUMO
The impact on the morphology nanoceramic materials generated from group 4 metal alkoxides ([M(OR)4]) and the same precursors modified by 6,6'-(((2-hydroxyethyl)azanediyl)bis(methylene))bis(2,4-di- tert-butylphenol) (referred to as H3-AM-DBP2 (1)) was explored. The products isolated from the 1:1 stoichiometric reaction of a series of [M(OR)4] where M = Ti, Zr, or Hf; OR = OCH(CH3)2(OPr i); OC(CH3)3(OBu t); OCH2C(CH3)3(ONep) with H3-AM-DBP2 proved, by single crystal X-ray diffraction, to be [(ONep)Ti( k4( O,O',O'',N)-AM-DBP2)] (2), [(OR)M(µ( O)- k3( O',O'',N)-AM-DBP2)]2 [M = Zr: OR = OPr i, 3·tol; OBu t, 4·tol; ONep, 5·tol; M = Hf: OR = OBu t, 6·tol; ONep, 7·tol]. The product from each system led to a tetradentate AM-DBP2 ligand and retention of a parent alkoxide ligand. For the monomeric Ti derivative (2), the metal was solved in a trigonal bipyramidal geometry, whereas for the Zr (3-5) and Hf (6, 7) derivatives a symmetric dinuclear complex was formed where the ethoxide moiety of the AM-DBP2 ligand bridges to the other metal center, generating an octahedral geometry. High quality density functional theory level gas-phase electronic structure calculations on compounds 2-7 using Gaussian 09 were used for meaningful time dependent density functional theory calculations in the interpretation of the UV-vis absorbance spectral data on 2-7. Nanoparticles generated from the solvothermal treatment of the ONep/AM-DBP2 modified compounds (2, 5, 7) in comparison to their parent [M(ONep)4] were larger and had improved regularity and dispersion of the final ceramic nanomaterials.
RESUMO
In an effort to generate single-source precursors for the production of metal-siloxide (MSiO x) materials, the tris(trimethylsilyl)silanol (H-SST or H-OSi(SiMe3)3 (1) ligand was reacted with a series of group 4 and 5 metal alkoxides. The group 4 products were crystallographically characterized as [Ti(SST)2(OR)2] (OR = OPr i (2), OBu t (3), ONep (4)); [Ti(SST)3(OBu n)] (5); [Zr(SST)2(OBu t)2(py)] (6); [Zr(SST)3(OR)] (OR = OBu t (7), ONep, (8)); [Hf(SST)2(OBu t)2] (9); and [Hf(SST)2(ONep)2(py) n] ( n = 1 (10), n = 2 (10a)) where OPr i = OCH(CH3)2, OBu t = OC(CH3)3, OBu n = O(CH2)3CH3, ONep = OCH2C(CH3)3, py = pyridine. The crystal structures revealed varied SST substitutions for: monomeric Ti species that adopted a tetrahedral ( T-4) geometry; monomeric Zr compounds with coordination that varied from T-4 to trigonal bipyramidal ( TBPY-5); and monomeric Hf complexes isolated in a TBPY-5 geometry. For the group 5 species, the following derivatives were structurally identified as [V(SST)3(py)2] (11), [Nb(SST)3(OEt)2] (12), [Nb(O)(SST)3(py)] (13), 2[H][(Nb(µ-O)2(SST))6(µ6-O)] (14), [Nb8O10(OEt)18(SST)2·1/5Na2O] (15), [Ta(SST)(µ-OEt)(OEt)3]2 (16), and [Ta(SST)3(OEt)2] (17) where OEt = OCH2CH3. The group 5 monomeric complexes were solved in a TBPY-5 arrangement, whereas the Ta of the dinculear 16 was solved in an octahedral coordination environment. Thermal analyses of these precursors revealed a stepwise loss of ligand, which indicated their potential utility for generating the MSiO x materials. The complexes were thermally processed (350-1100 °C, 4 h, ambient atmosphere), but instead of the desired MSiO x, transmission electron microscopy analyses revealed that fractions of the group 4 and group 5 precursors had formed unusual metal oxide silica architectures.
RESUMO
We disclose a [(PhO)3P]/NiBr2-catalyzed regioselective ß,δ-diarylation of unactivated olefins in ketimines with aryl halides and arylzinc reagents. This diarylation proceeds at remote locations to the carbonyl group to afford, after simple H+ workup, diversely substituted ß,δ-diarylketones that are otherwise difficult to access readily with existing methods. Deuterium-labeling and crossover experiments indicate that diarylation proceeds by ligand-enabled contraction of transient nickellacycles.
RESUMO
A family of magnesium and calcium salen-derivatives was synthesized and characterized for use as subterranean fluid flow monitors. For the Mg complexes, di- n-butyl magnesium ([Mg(Bu n)2]) was reacted with N, N'-ethylene bis(salicylideneimine) (H2-salen), N, N'-bis(salicylidene)-1,2-phenylenediamine (H2-saloPh), N, N'-bis(3,5-di- t-butylsalicylidene)-ethylenediamine (H2-salo-Bu t), or N, N'-bis(3,5-di- t-butylsalicylidene)-1,2-phenylenediamine (H2-saloPh-Bu t), and the products were identified by single-crystal X-ray diffraction as [(κ3-(O,N,N'),µ-(O')saloPh)(µ-(O),(κ2-(N,N'),µ-(O')saloPh)2(µ-(O),κ3-(N,N',O')saloPh')Mg4]·2tol (1·2tol; saloPh' = an alkyl-modified saloPh derivative generated in situ), [(κ4-(O,N,N',O')saloPh)Mg(py)2]·py (2·py), [(κ4-(O,N,N',O')salo-Bu t)Mg(py)2] (3), [(κ4-(O,N,N',O')saloPh-Bu t)Mg(py)2]·tol (4·tol), and [(κ3-(O,N,N'),µ-(O')saloPh-Bu t)Mg]2 (5), where tol = toluene; py = pyridine. For the Ca species, a calcium amide was independently reacted with H2-salo-Bu t and H2-saloPh-Bu t to generate the crystallographcially characterized compounds: [(κ4-(O,N,N',O')salo-Bu t)Ca(py)3] (6), [(κ4-(O,N,N',O')saloPh-Bu t)Ca(py)3]·py (7·py). The bulk powders of these compounds were further characterized by a number of analytical tools, where 2-7 were found to be distinguishable by Fourier transform infrared and resonance Raman spectroscopies. Structural properties obtained from quantum calculations of gas-phase analogues are in good agreement with the single-crystal results. The potential utility of these compounds as taggants for monitoring subterranean fluid flows was demonstrated through a series of experiments to evaluate their stability to high temperature and pressure, interaction with mineral surfaces, and elution behavior from a loaded proppant pack.
RESUMO
A pair of thallium salen derivatives was synthesized and characterized for potential use as monitors (or taggants) or as models for Group 13 complexes for subterranean fluid flows. These precursors were isolated from the reaction of thallium ethoxide with N,N'-bis(3,5-di-tert-butylsalicylidene)-ethylenediamine (H2-salo-But), or N,N'-bis(3,5-di-tert-butylsalicylidene)-1,2-phenylenediamine (H2-saloPh-But). The products were identified by single crystal X-ray diffraction as: [((µ-O)2,κ1-(N)(N')salo-But)Tl2] (1) and {[((µ-O)2saloPh-But)Tl2][((µ-O)2,κ1-(N)(N')saloPh-But)Tl2]} (2). Both structures are similar, wherein each O atom of the salo moiety bridges the two Tl atoms, leading to a TlTl interaction, which is further stabilized by an intramolecular π-bond with neighboring phenyl rings. For 1, an additional TlN interaction was solved for each metal center; whereas, for 2, one of the two molecules in the matrix has a weak TlN interaction but no bonding noted in the other molecule. Both Density Functional Theory (DFT) calculations and variable temperature solution 205Tl NMR studies of 1 and 2 further confirmed the TlTl interaction. The UV-vis absorbance spectra of these compounds had an absorbance peak at 392 nm for 1 and a broad absorbance peak centered at 469 nm for 2, which were found to be in good agreement with the DFT calculated spectra that were dominated by the singlet state. Fluorescence emission and excitation studies reveal absorptions at 360 and 380 nm for 1 and 2, respectively, which are attributed to the TlTl metal centers. To demonstrate practicality, fluorescence spectra of 1 and 2 were obtained using a handheld 405 nm cw laser pointer and portable spectrometer where compound 1 was found to glow 15 times brighter than compound 2. Only compound 1 was found to survive the simulated deep-well conditions explored, which was attributed to the TlN interaction noted for 1 but not for 2.
RESUMO
We disclose a strategy for Ni-catalyzed dicarbofunctionalization of olefins in styrenes by intercepting Heck C(sp3)-NiX intermediates with arylzinc reagents. This approach utilizes a readily removable imine as a coordinating group that plays a dual role of intercepting oxidative addition species derived from aryl halides and triflates to promote Heck carbometalation and stabilizing the Heck C(sp3)-NiX intermediates as transient metallacycles to suppress ß-hydride elimination and facilitate transmetalation/reductive elimination steps. This method affords diversely substituted 1,1,2-triarylethyl products that occur as structural motifs in various natural products.
RESUMO
The structural properties of a series of scandium inorganic acid derivatives were determined. The reaction of Sc(0) with concentrated aqueous hydrochloric acid led to the isolation of [(H2O)5Sc(µ-OH)]24Cl·2H2O (1). Compound 1 was modified with a series of inorganic acids (i.e., HNO3, H3PO4, and H2SO4) at room temperature and found to form {[(H2O)4Sc(κ(2)-NO3)(µ-OH)]NO3}2 (2a), [(H2O)4Sc(κ(2)-NO3)2]NO3·H2O (2b) (at reflux temperatures), {6[H][Sc(µ-PO4)(PO4)]6}n (3), and [H][Sc(µ3-SO4)2]·2H2O (4a). Additional organosulfonic acid derivatives were investigated, including tosylic acid (H-OTs) to yield {[(H2O)4Sc(OTs)2]OTs}·2H2O (4b) in H2O and [(DMSO)3Sc(OTs)3] (4c) in dimethyl sulfoxide and triflic acid (H-OTf) to form [Sc(H2O)8]OTf3 (4d). Other organic acid modifications of 1 were also investigated, and the final structures were determined to be {([(H2O)2Sc(µ-OAc)2]Cl)6}n (5) from acetic acid (H-OAc) and [Sc(µ-TFA)3Sc(µ-TFA)3]n (6) from trifluoroacetic acid (H-TFA). In addition to single-crystal X-ray structures, the compounds were identified by solid-state and solution-state (45)Sc nuclear magnetic resonance spectroscopic studies.
RESUMO
A series of ß-aminophosphines derived from 1,3,5-triaza-7-phosphaadamantane (PTA) are described. PTA-CHPhNHPh (1), PTA-CH(p-C(6)H(4)OCH(3))NHPh (2), and PTA-CPh(2)NHPh (3) were prepared in good yield (62-77%) by reaction of lithiated PTA with the corresponding imine followed by hydrolysis. Compounds 1 and 2 were synthesized as pairs of diastereomers which were separated by successive recrystallization from THF/hexane. Compounds 1-3 are somewhat soluble in water (S(25)(o) = 4.8 (1), 4.9 (2), 2.7 (3) g/L). Upon coordination to Ru(II) arene centers both monodentate (κ(1)-P) [RuCl(2)(η(6)-toluene)(1-3)] and bidentate (κ(2)-P,N) [RuCl(η(6)-toluene)(1-3)]Cl coordination modes were observed. Ru(II) arene complexes 4-6 exhibited hemilabile behavior transitioning between κ(1)-P and κ(2)-P,N coordination upon change in solvent or addition of a coordinating ligand such as Cl(-) or CH(3)CN. Complexes (4-6) were found to be active air stable catalysts for the aqueous phase hydration of various nitriles with TOF up to 285 h(-1) and TON of up to 97,000 observed.