Long-Range Ballistic Propagation of 80% Excitonic Fraction Polaritons in a Perovskite Metasurface at Room Temperature.

Exciton-polaritons, hybrid light-matter excitations arising from the strong coupling between excitons in semiconductors and photons in photonic nanostructures, are crucial for exploring the physics of quantum fluids of light and developing all-optical devices. Achieving room temperature propagation of polaritons with a large excitonic fraction is challenging but vital, e.g., for nonlinear light transport. We report on room temperature propagation of exciton-polaritons in a metasurface made from a subwavelength lattice of perovskite pillars. The large Rabi splitting, much greater than the optical phonon energy, decouples the lower polariton band from the phonon bath of the perovskite. These cooled polaritons, in combination with the high group velocity achieved through the metasurface design, enable long-range propagation, exceeding hundreds of micrometers even with an 80% excitonic component. Furthermore, the design of the metasurface introduces an original mechanism for unidirectional propagation through polarization control, suggesting a new avenue for the development of advanced polaritonic devices.

Taming Friedrich-Wintgen Interference in a Resonant Metasurface: Vortex Laser Emitting at an On-Demand Tilted Angle.

Friedrich-Wintgen (FW) interference is an atypical coupling mechanism that grants loss exchange between leaky resonances in non-Hermitian classical and quantum systems. Intriguingly, such a mechanism makes destructive interference possible for scenarios in which a radiating wave becomes a bound state in the continuum (BIC) by giving away all of its losses. Here we propose and demonstrate experimentally an original concept to tailor FW-BICs with polarization singularity at on-demand wavevectors in an optical metasurface. As a proof-of-concept, using hybrid organic-inorganic halide perovskite as an active material, we empower this novel polarization singularity to obtain lasing emission, exhibiting both highly directional emission at oblique angles and a polarization vortex in momentum space. Our results pave the way to steerable coherent emission with a tailored polarization pattern for applications in optical communication/manipulation in free space, high-resolution imaging/focusing, and data storage.

Photonic crystal backbone for light trapping inside an ultrathin, low absorbing layer.

A few tens of nanometre thick ultrathin materials may suffer from a very low absorption at their band edges. In this work, we investigate a photonic crystal (PC) made of a lowcost, transparent patterned silicon nitride (SiNx) layer, conformally covered with an ultrathin active layer (e.g., 20 nm TiO2) in view of its use in various applications such as photocatalysis. A fair estimation of the absorption enhancement, considering the volume of the active material, is calculated using RCWA. A remarkable enhancement (more than ten-folds) in absorptance in the near UV range and a very high transmittance over the visible range are observed. A detailed modal analysis of the structures-of-interest unravels the Light Trapping (LT) mechanisms and allows the derivation of key design guidelines. Optical measurements on a patterned sample provide a first proof-of-concept of such possible photonic backbone structures suitable for highly efficient depollution and artificial photosynthesis for solar fuels production.

Enhanced light-extraction efficiency and emission directivity in compact photonic-crystal based AlGaInP thin-films for color conversion applications.

We investigated the use of photonic crystals with different opto-geometrical parameters for light extraction from AlGaInP/InGaP MQW color converters. Blue-to-red and green-to-red color conversions were demonstrated using room-temperature photoluminescence with excitation wavelengths at 405nm and 514nm. Complete, compact and highly directional light extraction was demonstrated. 3D-FDTD and a herein-developed phenomenological model derived from the standard coupled-mode theory were used to analyze the results. The highest light extraction gains were ∼8 times better than unpatterned reference structures, which were paired with short extraction lengths (between 2µm and 6µm depending on the acceptance angle) and directional light emission for square lattice of nanopillars with a lattice period of 400nm. The design guidelines set in this work could pave the way for the use of inorganic MQW epi-layer color converters to achieve full color microdisplays on a single wafer.

Miniature Optical Particle Counter and Analyzer Involving a Fluidic-Optronic CMOS Chip Coupled with a Millimeter-Sized Glass Optical System.

Our latest advances in the field of miniaturized optical PM sensors are presented. This sensor combines a hybrid fluidic-optronic CMOS (holed retina) that is able to record a specific irradiance pattern scattered by an illuminated particle (scattering signature), while enabling the circulation of particles toward the sensing area. The holed retina is optically coupled with a monolithic, millimeter-sized, refracto-reflective optical system. The latter notably performs an optical pre-processing of signatures, with a very wide field of view of scattering angles. This improves the sensitivity of the sensors, and simplifies image processing. We report the precise design methodology for such a sensor, as well as its fabrication and characterization using calibrated polystyrene beads. Finally, we discuss its ability to characterize particles and its potential for further miniaturization and integration.

Directing random lasing emission using cavity exciton-polaritons.

Random lasing is an intriguing phenomenon occurring in disordered structures with optical gain in which light scattering provides the necessary feedback for lasing action. Unlike conventional lasers, random lasing systems emit in all directions due to light scattering. While this property can be desired in some cases, directional emission remains required for most applications. In a vertical microcavity containing the hybrid perovskite CH3NH3PbBr3, we report here the coupling of the emission of a random laser with a cavity polaritonic resonance, resulting in a directional random lasing, whose emission angles can be tuned by varying the cavity detuning and reach values as large as 15.8° and 22.4°.

Tailoring Dispersion of Room-Temperature Exciton-Polaritons with Perovskite-Based Subwavelength Metasurfaces.

Exciton-polaritons represent a promising platform for studying quantum fluids of light and realizing prospective all-optical devices. Here we report on the experimental demonstration of exciton-polaritons at room temperature in resonant metasurfaces made from a sub-wavelength two-dimensional lattice of perovskite pillars. The strong coupling regime is revealed by both angular-resolved reflectivity and photoluminescence measurements, showing anticrossing between photonic modes and the exciton resonance with a Rabi splitting in the 200 meV range. Moreover, by tailoring the photonic Bloch mode to which perovskite excitons are coupled, polaritonic dispersions are engineered exhibiting linear, parabolic, and multivalley dispersions. All of our results are perfectly reproduced by both numerical simulations based on a rigorous coupled wave analysis and an elementary model based on a quantum theory of radiation-matter interaction. Our results suggest a new approach to study exciton-polaritons and pave the way toward large-scale and low-cost integrated polaritonic devices operating at room temperature.

Lasing at topological edge states in a photonic crystal L3 nanocavity dimer array.

Topological photonics have provided new insights for the manipulation of light. Analogous to electrons in topological insulators, photons travelling through the surface of a topological photonic structure or the interface of two photonic structures with different topological phases are free from backscattering caused by structural imperfections or disorder. This exotic nature of the topological edge state (TES) is truly beneficial for nanophotonic devices that suffer from structural irregularities generated during device fabrication. Although various topological states and device concepts have been demonstrated in photonic systems, lasers based on a topological photonic crystal (PhC) cavity array with a wavelength-scale modal volume have not been explored. We investigated TESs in a PhC nanocavity array in the Su-Schrieffer-Heeger model. Upon optical excitation, the topological PhC cavity array realised using an InP-based multiple-quantum-well epilayer spontaneously exhibits lasing peaks at the topological edge and bulk states. TES characteristics, including the modal robustness caused by immunity to scattering, are confirmed from the emission spectra and near-field imaging and by theoretical simulations and calculations.

Anderson localizations and photonic band-tail states observed in compositionally disordered platform.

Anderson localization in random structures is an intriguing physical phenomenon, for which experimental verifications are far behind theoretical predictions. We report the first experimental confirmations of photonic band-tail states and a complete transition of Anderson localization. An optically activated photonic crystal alloy platform enables the acquisition of extensive experimental data exclusively on pure eigenstates, revealing direct evidence of band-tail states and Anderson localization transition within the band-tail states. Analyses of both experimental and simulated data lead to a comprehensive picture of photon localization that is highly consistent with theories by Anderson and others. We believe that our results provide a strong experimental foundation upon which both the fundamental understandings and application possibility of Anderson localization can be promoted significantly.

Highly tunable heterogeneously integrated III-V on silicon sampled-grating distributed Bragg reflector lasers operating in the O-band.

We report on the design, fabrication and performance of the first hetero-integrated III-V on silicon sampled-grating distributed Bragg reflector lasers (SGDBR) operating in the O-band and based on direct bonding and adiabatic coupling. Two devices with different geometric parameters are presented both showing an output power in the Si waveguide as high as 7.5 mW and a continuous tuning range of 27 and 35 nm respectively with a side mode suppression ration higher than 35 dB.

Ultrathin Epitaxial Silicon Solar Cells with Inverted Nanopyramid Arrays for Efficient Light Trapping.

Ultrathin c-Si solar cells have the potential to drastically reduce costs by saving raw material while maintaining good efficiencies thanks to the excellent quality of monocrystalline silicon. However, efficient light trapping strategies must be implemented to achieve high short-circuit currents. We report on the fabrication of both planar and patterned ultrathin c-Si solar cells on glass using low temperature (T < 275 °C), low-cost, and scalable techniques. Epitaxial c-Si layers are grown by PECVD at 160 °C and transferred on a glass substrate by anodic bonding and mechanical cleavage. A silver back mirror is combined with a front texturation based on an inverted nanopyramid array fabricated by nanoimprint lithography and wet etching. We demonstrate a short-circuit current density of 25.3 mA/cm(2) for an equivalent thickness of only 2.75 µm. External quantum efficiency (EQE) measurements are in very good agreement with FDTD simulations. We infer an optical path enhancement of 10 in the long wavelength range. A simple propagation model reveals that the low photon escape probability of 25% is the key factor in the light trapping mechanism. The main limitations of our current technology and the potential efficiencies achievable with contact optimization are discussed.

Design rules for net absorption enhancement in pseudo-disordered photonic crystal for thin film solar cells.

The role of pseudo-disordered photonic crystals on the absorption efficiency of simplified thin film crystalline silicon solar cells is presented and discussed. The expected short circuit current can thus be further increased compared to a fully optimized square lattice of holes, thanks to carefully controlled positions of the nanoholes in the considered realistic simplified solar cell stack. In addition, the pseudo-disordered structures are less sensitive to the angle of incidence, especially in the long wavelength range.

Colloidal nanophotonics: the emerging technology platform.

Dating back to decades or even centuries ago, colloidal nanophotonics during the last ten years rapidly extends towards light emitting devices, lasers, sensors and photonic circuitry to manifest itself as an emerging technology platform rather than an entirely academic research field.

Co-integrated 1.3µm hybrid III-V/silicon tunable laser and silicon Mach-Zehnder modulator operating at 25Gb/s.

In this paper, the 200mm silicon-on-insulator (SOI) platform is used to demonstrate the monolithic co-integration of hybrid III-V/silicon distributed Bragg reflector (DBR) tunable lasers and silicon Mach-Zehnder modulators (MZMs), to achieve fully integrated hybrid transmitters for silicon photonics. The design of each active component, as well as the fabrication process steps of the whole architecture are described in detail. A data transmission rate up to 25Gb/s has been reached for transmitters using MZMs with active lengths of 2mm and 4mm. Extinction ratios of respectively 2.9dB and 4.7dB are obtained by applying drive voltages of 2.5V peak-to-peak on the MZMs. 25Gb/s data transmission is demonstrated at 1303.5nm and 1315.8nm, with the possibility to tune the operating wavelength by up to 8.5nm in each case, by using metallic heaters above the laser Bragg reflectors.

1310 nm hybrid InP/InGaAsP on silicon distributed feedback laser with high side-mode suppression ratio.

We report on the design, fabrication and performance of a hetero-integrated III-V on silicon distributed feedback lasers (DFB) at 1310 nm based on direct bonding and adiabatic coupling. The continuous wave (CW) regime is achieved up to 55 °C as well as mode-hop-free operation with side-mode suppression ratio (SMSR) above 55 dB. At room temperature, the current threshold is 36 mA and the maximum coupled power in the silicon waveguide is 22 mW.

Focus issue introduction: renewable energy and the environment.

This focus issue highlights selected contributions from authors who presented promising concepts at OSA's Renewable Energy and the Environment Optics and Photonics Congress held 11-15 November 2012 in Eindhoven, The Netherlands.

Photonic crystals and optical mode engineering for thin film photovoltaics.

In this paper, we present the design, analysis, and experimental results on the integration of 2D photonic crystals in thin film photovoltaic solar cells based on hydrogenated amorphous silicon. We introduce an analytical approach based on time domain coupled mode theory to investigate the impact of the photon lifetime and anisotropy of the optical resonances on the absorption efficiency. Specific design rules are derived from this analysis. We also show that, due to the specific properties of the photonic crystal resonances, the angular acceptance of such solar cells is particularly high. Rigorous Coupled Wave Analysis simulations show that the absorption in the a-Si:H active layers, integrated from 300 to 750 nm, is only decreased from 65.7% to 60% while the incidence angle is increased from 0 to 55°. Experimental results confirm the stability of the incident light absorption in the patterned stack, for angles of incidence up to 50°.

Combined front and back diffraction gratings for broad band light trapping in thin film solar cell.

In this paper, we present the integration of combined front and back 1D and 2D diffraction gratings with different periods, within thin film photovoltaic solar cells based on crystalline silicon layers. The grating structures have been designed considering both the need for incident light absorption enhancement and the technological feasibility. Long wavelength absorption is increased thanks to the long period (750 nm) back grating, while the incident light reflection is reduced by using a short period (250 nm) front grating. The simulated short circuit current in a solar cell combining a front and a back grating structures with a 1.2 µm thick c-Si layer, together with the back electrode and TCO layers, is increased up to 30.3 mA/cm2, compared to 18.4 mA/cm2 for a reference stack, as simulated using the AM1.5G solar spectrum intensity distribution from 300 nm to 1100 nm, and under normal incidence.

Design, fabrication and optical characterization of photonic crystal assisted thin film monocrystalline-silicon solar cells.

In this paper, we present the integration of an absorbing photonic crystal within a monocrystalline silicon thin film photovoltaic stack fabricated without epitaxy. Finite difference time domain optical simulations are performed in order to design one- and two-dimensional photonic crystals to assist crystalline silicon solar cells. The simulations show that the 1D and 2D patterned solar cell stacks would have an increased integrated absorption in the crystalline silicon layer would increase of respectively 38% and 50%, when compared to a similar but unpatterned stack, in the whole wavelength range between 300 nm and 1100 nm. In order to fabricate such patterned stacks, we developed an effective set of processes based on laser holographic lithography, reactive ion etching and inductively coupled plasma etching. Optical measurements performed on the patterned stacks highlight the significant absorption increase achieved in the whole wavelength range of interest, as expected by simulation. Moreover, we show that with this design, the angle of incidence has almost no influence on the absorption for angles as high as around 60°.

Dual-wavelength micro-resonator combining photonic crystal membrane and Fabry-Perot cavity.

We propose a novel system of dual-wavelength micro-cavity based on the coupling between a photonic crystal membrane (PCM); operating at the Γ- point of the Brillouin zone, with a Fabry-Perot vertical cavity (FP). The optical coupling, which can be adjusted by the overlap between both optical modes, leads to the generation of two hybrid modes separated by a frequency difference which can be tuned using micro-opto-electromechanical structures. The proposed dual-wavelength micro-cavity is attractive for application where dual-mode behaviour is desirable as dual-lasing, frequency conversion. An analytical model, numerical (FDTD) and transfer matrix method investigations are presented.