RESUMO
High mobility of twin boundaries in modulated martensites of Ni-Mn-Ga-based ferromagnetic shape memory alloys holds a promise for unique magnetomechanical applications. This feature has not been fully understood so far, and in particular, it has yet not been unveiled what makes the lattice mechanics of modulated Ni-Mn-Ga specifically different from other martensitic alloys. Here, results of dedicated laser-ultrasonic measurements on hierarchically twinned five-layer modulated (10M) crystals fill this gap. Using a combination of transient grating spectroscopy and laser-based resonant ultrasound spectroscopy, it is confirmed that there is a shear elastic instability in the lattice, being significantly stronger than in any other martensitic material and also than what the first-principles calculations for Ni-Mn-Ga predict. The experimental results reveal that the instability is directly related to the lattice modulations. A lattice-scale mechanism of dynamic faulting of the modulation sequence that explains this behavior is proposed; this mechanism can explain the extraordinary mobility of twin boundaries in 10M.
RESUMO
The Colorado potato beetle (CPB; Leptinotarsa decemlineata) is an important potato pest with known resistance to pyrethroids and organophosphates in Czechia. Decreased efficacy of neonicotinoids has been observed in last decade. After the restriction of using chlorpyrifos, thiacloprid and thiamethoxam by EU regulation, growers seek for information about the resistance of CPB to used insecticides and recommended antiresistant strategies. The development of CPB resistance to selected insecticides was evaluated in bioassays in 69 local populations from Czechia in 2017-2022 and in 2007-2022 in small plot experiments in Zabcice in South Moravia. The mortality in each subpopulation in the bioassays was evaluated at the field-recommended rates of insecticides to estimate the 50% and 90% lethal concentrations (LC50 and LC90, respectively). High levels of CPB resistance to lambda-cyhalothrin and chlorpyrifos were demonstrated throughout Czechia, without significant changes between years and regions. The average mortality after application of the field-recommended rate of lambda-cyhalothrin was influenced by temperature before larvae were sampled for bioassays and decreased with increasing temperature in June. Downwards trends in the LC90 values of chlorpyrifos and the average mortality after application of the field-recommended rate of acetamiprid in the bioassay were recorded over a 6-year period. The baseline LC50 value (with 95% confidence limit) of 0.04 mg/L of chlorantraniliprole was established for Czech populations of CPBs for the purpose of resistance monitoring in the next years. Widespread resistance to pyrethroids, organophosphates and neonicotinoids was demonstrated, and changes in anti-resistant strategies to control CPBs were discussed.
Assuntos
Clorpirifos , Besouros , Resistência a Inseticidas , Inseticidas , Neonicotinoides , Tiazinas , Animais , Besouros/efeitos dos fármacos , Inseticidas/farmacologia , Neonicotinoides/farmacologia , Clorpirifos/farmacologia , Piretrinas/farmacologia , Nitrilas/farmacologia , Larva/efeitos dos fármacos , República Tcheca , Tiametoxam , Solanum tuberosum/parasitologiaRESUMO
Despite the fundamental and technological importance of the elastic constants, a suitable method for their full characterization in epitaxial films is missing. Here we show that transient grating spectroscopy (TGS) with highly k-vector-selective generation and detection of acoustic waves is capable of determination of all independent elastic coefficients of an epitaxial thin film grown on a single-crystalline substrate. This experimental setup enables detection of various types of guided acoustic waves and evaluation of the directional dependence of their speeds of propagation. For the studied model system, which is a 3µm thin epitaxial film of the NiTi shape memory alloy on an MgO substrate, the TGS angular maps include Rayleigh-type surface acoustic waves as well as Sezawa-type and Love-type modes, delivering rich information on the elastic response of the film under different straining modes. The resulting inverse problem, which means the calculation of the elastic constants from the TGS maps, is subsequently solved using the Ritz-Rayleigh numerical method. Using this approach, tetragonal elastic constants of the NiTi film and their changes with the austeniteâmartensite phase transition are analyzed.
RESUMO
Introduction: Automated bone age assessment has recently become increasingly popular. The aim of this study was to assess the agreement between automated and manual evaluation of bone age using the method according to Tanner-Whitehouse (TW3) and Greulich-Pyle (GP). Methods: We evaluated 1285 bone age scans from 1202 children (657 scans from 612 boys) by using both manual and automated (TW3 as well as GP) bone age assessment. BoneXpert software versions 2.4.5.1. (BX2) and 3.2.1. (BX3) (Visiana, Holte, Denmark) were compared with manual evaluation using root mean squared error (RMSE) analysis. Results: RMSE for BX2 was 0.57 and 0.55 years in boys and 0.72 and 0.59 years in girls, respectively for TW3 and GP. For BX3, RMSE was 0.51 and 0.68 years in boys and 0.49 and 0.52 years in girls, respectively for TW3 and GP. Sex- and age-specific analysis for BX2 identified the largest differences between manual and automated TW3 evaluation in girls between 6-7, 12-13, 13-14 and 14-15 years, with RMSE 0.88, 0.81, 0.92 and 0.84 years, respectively. The BX3 version showed better agreement with manual TW3 evaluation (RMSE 0.64, 0.45, 0.46 and 0.57). Conclusion: The latest version of the BoneXpert software provides improved and clinically sufficient agreement with manual bone age evaluation in children of both sexes compared to the previous version and may be used for routine bone age evaluation in non-selected cases in pediatric endocrinology care.
Assuntos
Determinação da Idade pelo Esqueleto , Software , Adolescente , Criança , Feminino , Humanos , Masculino , Determinação da Idade pelo Esqueleto/métodos , População BrancaRESUMO
The Colorado potato beetle (CPB, Leptinotarsa decemlineata Slechtd.) is an invasive pest with economic importance worldwide. Sex ratios during egg-hatching and a frequency of polyandry in single-female families were analysed to clarify the reproduction strategy of CPB, which was still known only in fragments. 1296 just hatching 1st instar CPB larvae were collected from 19 single-female families, of which 13 were random families collected from potato fields and 6 were families produced by laboratory farming of naturally fertilised females. All larvae were analysed to detect a sex using a qPCR-based method and to detect polymorphisms in genotypes of 9 microsatellite (SSR) markers. The bias in sex ratio in favour of females was confirmed using linear mixed-effects model in both experimental groups of families: field collections (F = 36.39; P = 0.0001) and laboratory farming (F = 13.74; P = 0.0139). The analysis of diversity in microsatellites proved the polyandry in all progenies as 73% of analysed segregation patterns did not match with the patterns expected for full-sib progenies; on average per locus, 46% of allelic and 49.7% of genotype ratios showed irregular segregation. Both findings contribute toward understanding CPB success rate as an invasive species, as the preferential bearing of females with polyandry has a great potential to keep fitness of progenies, to maintain and operate population diversity, and to accelerate the reproduction of the pest.
Assuntos
Besouros , Solanum tuberosum , Animais , Besouros/genética , Larva/genética , Reprodução/genética , Razão de Masculinidade , Solanum tuberosum/genética , Masculino , FemininoRESUMO
Circadian preferences are frequently used as a synonym for chronotype. Both terms are based on different principles and are measured by a variant questionnaire. We focused on circadian preferences, delimited as an individual preference for the timing of various activities, and their relationship to the selected sociodemographic factors. All participants (n = 2068) filled out online questionnaires including MEQ, MCTQ, and sociodemographic information (age, sex, place of residence, marital status, childcare, education, financial security, physical and mental health). Although the concept of chronotype and circadian preference differ, the mutual correlation was high. Our results of the observed variables are similar to other studies. We revealed evening preference is related to a higher probability of living in a big city, having a single life, a higher risk of smoking, worse health status, and worse financial security. We observed a higher social jet lag among them. Our research complies with previous studies, which found that in some areas, people with evening preferences evince worse results. Due to the evening preference, these people are at a disadvantage, and the society's setting for morning operations can lead to a deepening of these differences. We recommend further research, which would focus on the practical application of results to the everyday life of participants to create preventive programs aimed at reducing the negative impact of evening preferences on life.
Assuntos
Ritmo Circadiano , Sono , Humanos , Síndrome do Jet Lag , Inquéritos e Questionários , Estilo de VidaRESUMO
Solid polymer electrolytes show their potential to partially replace conventional electrolytes in electrochemical devices. The solvent evaporation rate represents one of many options for modifying the electrode-electrolyte interface by affecting the structural and electrical properties of polymer electrolytes used in batteries. This paper evaluates the effect of solvent evaporation during the preparation of solid polymer electrolytes on the overall performance of an amperometric gas sensor. A mixture of the polymer host, solvent and an ionic liquid was thermally treated under different evaporation rates to prepare four polymer electrolytes. A carbon nanotube-based working electrode deposited by spray-coating the polymer electrolyte layer allowed the preparation of the electrode-electrolyte interface with different morphologies, which were then investigated using scanning electron microscopy and Raman spectroscopy. All prepared sensors were exposed to nitrogen dioxide concentration of 0-10 ppm, and the current responses and their fluctuations were analyzed. Electrochemical impedance spectroscopy was used to describe the sensor with an equivalent electric circuit. Experimental results showed that a higher solvent evaporation rate leads to lower sensor sensitivity, affects associated parameters (such as the detection/quantification limit) and increases the limit of the maximum current flowing through the sensor, while the other properties (hysteresis, repeatability, response time, recovery time) change insignificantly.
RESUMO
Apart from influencing the health of the worldwide population, the COVID-19 pandemic changed the day-to-day life of all, including children. A sedentary lifestyle along with the transformation of eating and sleep habits took place in the child population. These changes created a highly obesogenic environment. Our aim was to evaluate the current weight in the child population and identify the real effects of the pandemic. Height and weight data were collected by pediatricians from the pre-COVID-19 and post-COVID-19 periods from 3517 children (1759 boys and 1758 girls) aged 4.71 to 17.33 years. We found a significant rise in the z-score BMI between pediatric visits in the years 2019 and 2021 in both sexes aged 7, 9, 11, and 13 years. Especially alarming were the percentages of (severely) obese boys at the ages of 9 and 11 years, which exceed even the percentages of overweight boys. With the use of statistical modeling, we registered the most dramatic increment at around 12 years of age in both sexes. Based on our research in the Czech Republic, we can confirm the predictions that were given at the beginning of the pandemic that COVID-19-related restrictions worsened the already present problem of obesity and excess weight in children.
Assuntos
COVID-19 , Obesidade Infantil , Índice de Massa Corporal , COVID-19/epidemiologia , Criança , República Tcheca/epidemiologia , Feminino , Humanos , Masculino , Obesidade/epidemiologia , Sobrepeso/epidemiologia , Pandemias , Obesidade Infantil/epidemiologia , PrevalênciaRESUMO
The demand for biomaterials has been increasing along with the increase in the population of elderly people worldwide. The mechanical properties and high wear resistance of metallic biomaterials make them well-suited for use as substitutes or as support for damaged hard tissues. However, unless these biomaterials also have a low Young's modulus similar to that of human bones, bone atrophy inevitably occurs. Because a low Young's modulus is typically associated with poor wear resistance, it is difficult to realize a low Young's modulus and high wear resistance simultaneously. Also, the superelastic property of shape-memory alloys makes them suitable for biomedical applications, like vascular stents and guide wires. However, due to the low recoverable strain of conventional biocompatible shape-memory alloys, the demand for a new alloy system is high. The novel body-centered-cubic cobalt-chromium-based alloys in this work provide a solution to both of these problems. The Young's modulus of <001>-oriented single-crystal cobalt-chromium-based alloys is 10-30 GPa, which is similar to that of human bone, and they also demonstrate high wear and corrosion resistance. They also exhibit superelasticity with a huge recoverable strain up to 17.0%. For these reasons, the novel cobalt-chromium-based alloys can be promising candidates for biomedical applications.
Assuntos
Ligas , Ligas de Memória da Forma , Idoso , Ligas/química , Materiais Biocompatíveis/química , Cromo , Cobalto , Módulo de Elasticidade , Humanos , Teste de Materiais , Titânio/químicaRESUMO
The identification of sex in larvae of insects is usually challenging or even impossible, while in adults the sexual dimorphism is usually evident. Here, we used copy number analysis to develop a method of sex detection in Colorado potato beetle (Leptinotarsa decemlineata), which has an X0 sex determination system. The X linked gene LdVssc and autosomal gene LdUBE3B were identified as appropriate target and reference loci, respectively. The copy numbers (CNV) of LdVssc in males and females were estimated using standard droplet digital PCR (ddPCR) and real-time PCR (qPCR). With both methods, CNVs were bimodally distributed (BAddPCR = 0.709 and BAqPCR = 0.683) with 100% ability to distinguish females from males. The use of qPCR-based sex detection in a broad collection of 448 random CPB adults showed a perfect association (Phi = 1.0, p < 0.05) with the true sexes of adults, with mean CNV in females of 2.032 (SD = 0.227) and 0.989 in males (SD = 0.147). In the collection of 50 random 4th instar larvae, 27 females and 23 males were identified, consistent with the expected 1:1 sex ratio (p = 0.689). The method is suitable for sexing in all stages of ontogenesis. The optimal cost-effective application of the method in large populations requires the DNA extraction using CTAB, the qPCR assay in one biological replicate and three technical replicates of each marker, and the use of one randomly chosen male per run to calibrate calculation of CNV.
Assuntos
Besouros , Solanum tuberosum , Animais , Besouros/genética , Colorado , Variações do Número de Cópias de DNA , Feminino , Larva/genética , MasculinoRESUMO
Somatic hybridization has been frequently used to overcome sexual incompatibility between potato and its secondary germplasm. The primary objective of this study was to produce and evaluate somatic hybrids of Solanum tuberosum (Stub) and S. bulbocastanum (Sblb) for breeding purposes. In 2007, 23 somatic hybrids were produced using an electrofusion of mesophyll protoplasts of diploid (2n = 2x = 24) potato line StubDH165 and S. bulbocastanum PI24351 (Sblb66). Phenotype of somatic hybrids in field conditions were evaluated, together with constitution and stability of 30 nuclear (ncSSR) and 27 cytoplasmic (cpSSR) microsatellite markers and content of main glycoalkaloids. All somatic hybrids had very high field resistance against late blight, but the plants were infertile: the viability of pollen grains insignificantly varied between 0.58 and 8.97%. A significant somaclonal variation was observed in terms of the morphology of plants, the date of emergence, the quantity of harvested tubers, the content of glycoalkaloids in foliage, and nuclear microsatellite markers (ncSSR). The analysis of ncSSR identified five distinct genotypes of hybrids partly associated with phenotype variations. The process of somatic hybridization with regeneration of shoots was identified as the most likely source of somaclonal variation because the ncSSR genotypes of hybrids, which were maintained in vitro, remained stable for more than 10 years. The infertile somatic hybrids have no practical breeding potential, but they are considered very suitable for advanced studies of the differential expression of genes in the pathways linked to dormancy of tubers and synthesis of glycoalkaloids.
Assuntos
Solanum tuberosum , Solanum , Diploide , Fenótipo , Melhoramento Vegetal , Tubérculos/genética , Solanum/genética , Solanum tuberosum/química , Solanum tuberosum/genéticaRESUMO
Although spatial and temporal variation are both important components structuring microbial communities, the exact quantification of temporal turnover rates of fungi and bacteria has not been performed to date. In this study, we utilised repeated resampling of bacterial and fungal communities at specific locations across multiple years to describe their patterns and rates of temporal turnover. Our results show that microbial communities undergo temporal change at a rate of 0.010-0.025 per year (in units of Sorensen similarity), and the change in soil is slightly faster in fungi than in bacteria, with bacterial communities changing more rapidly in litter than soil. Importantly, temporal development differs across fungal guilds and bacterial phyla with different ecologies. While some microbial guilds show consistent responses across regional locations, others show site-specific development with weak general patterns. These results indicate that guild-level resolution is important for understanding microbial community assembly, dynamics and responses to environmental factors.
Assuntos
Microbiota , Micobioma , Fungos , Solo , Microbiologia do SoloRESUMO
The paper specifies the electrostatic spinning process of specific polymeric materials, such as polyvinylidene fluoride (PVDF), polyamide-6 (PA6, Nylon-6) and their combination PVDF/PA6. By combining nanofibers from two different materials during the spinning process, new structures with different mechanical, chemical, and physical properties can be created. The materials and their combinations were subjected to several measurements: scanning electron microscopy (SEM) to capture topography; contact angle of the liquid wettability on the sample surface to observe hydrophobicity and hydrophilicity; crystallization events were determined by differential scanning calorimetry (DSC); X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and Fourier-transform infrared spectroscopy (FT-IR) to describe properties and their changes at the chemical level. Furthermore, for the electrical properties of the sample, the dielectric characteristics and the piezoelectric coefficient were measured. The advantage of the addition of co-polymers was to control the properties of PVDF samples and understand the reasons for the changed functionality. The innovation point of this work is the complex analysis of PVDF modification caused by mixing with nylon PA6. Here we emphasize that the application of nylon during the spin influences the properties and structure (polarization, crystallization) of PVDF.
RESUMO
Normal-weight obesity appears to be an extended diagnosis/syndrome associated with insufficient physical fitness levels and inadequate eating habits at least from school years. However, its relation to long term health parameters in pre-school children remains unknown, even though pre-school age is crucial for the determining healthy lifelong habits. Therefore, the aim of the current study was to investigate the differences in physical fitness level and basic eating habits between normal-weight obese, normal-weight non-obese, and overweight and obese preschoolers. The research sample consisted of 188 preschoolers aged 4.0-6.9 years (Mage = 5.52 ± 0.8 year), normal-weight obese = 25; normal-weight non-obese = 143, overweight and obese = 20. Body composition was measured using bio-impedance InBody230. Six tests assessed the physical fitness level: sit-ups; standing long jump; shuttle running 4 × 5 meters; throwing with a tennis ball; multistage fitness tests; sit and reach. A four-item eating habits questionnaire for parents focusing on breakfast regularity, consumption of sweet foods and drinks, selection of food and attitude towards eating was used. A non-parametric analysis of variance and Fisher's exact test along with suitable effect sizes were used for data processing of physical fitness tests and the basic eating habits questionnaire, respectively. Normal-weight obese children performed significantly worse (from p = 0.03 to p < 0.001, ES ω2-G = low to medium) in muscular fitness, cardiorespiratory fitness and running agility compared to normal-weight non-obese counterparts and did not significantly differ in the majority of physical fitness performance tests from overweight and obese peers. In basic eating habits, normal-weight obese boys preferred significantly more sweet foods and drinks (p = 0.003 ES = 0.35, large), while normal-weight obese girls had significantly more negative attitude towards eating (p = 0.002 ES = 0.33, large) in comparison to their normal-weight non-obese peers. Normal-weight obesity seems to develop from early childhood and is associated with low physical fitness and deficits in eating habits which might inhibit the natural necessity for physically active life from pre-school age or sooner.
Assuntos
Peso Corporal , Comportamento Alimentar , Obesidade Infantil/epidemiologia , Obesidade Infantil/etiologia , Aptidão Física , Criança , Pré-Escolar , Estudos Transversais , Exercício Físico , Feminino , Humanos , Masculino , Vigilância em Saúde Pública , Instituições Acadêmicas , Inquéritos e QuestionáriosRESUMO
Thermal treatment conditions of solid polymer polymer electrolyte (SPE) were studied with respect to their impact on the surface morphology, phase composition and chemical composition of an imidazolium ionic-liquid-based SPE, namely PVDF/NMP/[EMIM][TFSI] electrolyte. These investigations were done using scanning electron microscopy, Raman spectroscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry as well as X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectroscopy. A thoroughly mixed blend of polymer matrix, ionic liquid and solvent was deposited on a ceramic substrate and was kept at a certain temperature for a specific time in order to achieve varying crystallinity. The morphology of all the electrolytes consists of spherulites whose average diameter increases with solvent evaporation rate. Raman mapping shows that these spherulites have a semicrystalline structure and the area between them is an amorphous region. Analysis of FTIR spectra as well as Raman spectroscopy showed that the ß-phase becomes dominant over other phases, while DSC technique indicated decrease of crystallinity as the solvent evaporation rate increases. XPS and ToF-SIMS indicated that the chemical composition of the surface of the SPE samples with the highest solvent evaporation rate approaches the composition of the ionic liquid.
RESUMO
The method of inclusion of various additives into a polymer depends highly on the material in question and the desired effect. In the case of this paper, nitride salts were introduced into polyvinylidene fluoride fibers prepared by electrospinning. The resulting changes in the structural, chemical and electrical properties of the samples were observed and compared using SEM-EDX, DSC, XPS, FTIR, Raman spectroscopy and electrical measurements. The observed results displayed a grouping of parameters by electronegativity and possibly the molecular mass of the additive salts. We virtually demonstrated elimination of the presence of the γ-phase by addition of Mg(NO3)2, Ca(NO3)2, and Zn(NO3)2 salts. The trend of electrical properties to follow the electronegativity of the nitrate salt cation is demonstrated. The performed measurements of nitrate salt inclusions into PVDF offer a new insight into effects of previously unstudied structures of PVDF composites, opening new potential possibilities of crystalline phase control of the composite and use in further research and component design.
RESUMO
Modern material science often makes use of polyvinylidene fluoride thin films because of various properties, like a high thermal and chemical stability, or a ferroelectric, pyroelectric and piezoelectric activity. Fibers of this polymer material are, on the other hand, much less explored due to various issues presented by the fibrous form. By introducing carbon nanotubes via electrospinning, it is possible to affect the chemical and electrical properties of the resulting composite. In the case of this paper, the focus was on the further improvement of interesting polyvinylidene fluoride properties by incorporating carbon nanotubes, such as changing the concentration of crystalline phases and the resulting increase of the dielectric constant and conductivity. These changes in properties have been explored by several methods that focused on a structural, chemical and electrical point of view. The resulting obtained data have been documented to create a basis for further research and to increase the overall understanding of the properties and usability of polyvinylidene fluoride fiber composites.
RESUMO
An electrochemical amperometric ethylene sensor with solid polymer electrolyte (SPE) and semi-planar three electrode topology involving a working, pseudoreference, and counter electrode is presented. The polymer electrolyte is based on the ionic liquid 1-butyl 3-methylimidazolium bis(trifluoromethylsulfonyl)imide [BMIM][NTf2] immobilized in a poly(vinylidene fluoride) matrix. An innovative aerosol-jet printing technique was used to deposit the gold working electrode (WE) on the solid polymer electrolyte layer to make a unique electrochemical active SPE/WE interface. The analyte, gaseous ethylene, was detected by oxidation at 800 mV vs. the platinum pseudoreference electrode. The sensor parameters such as sensitivity, response/recovery time, repeatability, hysteresis, and limits of detection and quantification were determined and their relation to the morphology and microstructure of the SPE/WE interface examined. The use of additive printing techniques for sensor preparation demonstrates the potential of polymer electrolytes with respect to the mass production of printed electrochemical gas sensors.
RESUMO
The experimental study deals with the investigation of the effect of diverse crystallinity of imidazolium ionic-liquid-based SPE on conductivity and current fluctuations. The experimental study was carried out on samples consisting of [EMIM][TFSI] as ionic liquid, PVDF as a polymer matrix and NMP as a solvent. After the deposition, the particular sample was kept at an appropriate temperature for a specific time in order to achieve different crystalline forms of the polymer in the solvent, since the solvent evaporation rate controls crystallization. The ac/dc conductivities of SPEs were investigated across a range of temperatures using broadband dielectric spectroscopy in terms of electrical conductivity. In SPE samples of the higher solvent evaporation rate, the real parts of conductivity spectra exhibit a sharper transition during sample cooling and an increase of overall conductivity, which is implied by a growing fraction of the amorphous phase in the polymer matrix in which the ionic liquid is immobilized. The conductivity master curves illustrate that the changing of SPEs morphology is reflected in the low frequency regions governed by the electrode polarization effect. The dc conductivity of SPEs exhibits Vogel-Fulcher-Tammann temperature dependence and increases with the intensity of thermal treatment. Spectral densities of current fluctuations showed that flicker noise, thermal noise and shot noise seems to be major noise sources in all samples. The increase of electrolyte conductivity causes a decrease in bulk resistance and partially a decrease in charge transfer resistance, while also resulting in an increase in shot noise. However, the change of electrode material results in a more significant change of spectral density of current fluctuations than the modification of the preparation condition of the solid polymer electrolyte. Thus, the contact noise is considered to contribute to overall current fluctuations across the samples.