Stirring the hydrogen and butanol production from Enset fiber via simultaneous saccharification and fermentation (SSF) process.

Enset fiber is a promising feedstock for biofuel production with the potential to reduce carbon emissions and improve the sustainability of the energy system. This study aimed to maximize hydrogen and butanol production from Enset fiber through simultaneous saccharification and fermentation (SSF) process in bottles as well as in bioreactor. The SSF process in bottles resulted in a higher butanol concentration of 11.36 g/L with a yield of 0.23 g/g and a productivity of 0.16 g/(L h) at the optimal process parameters of 5% (w/v) substrate loading, 16 FPU/g cellulase loading, and 100 rpm agitation speed from pretreated Enset fiber. Moreover, a comparable result to the bottle experiment was observed in the bioreactor with pH-uncontrolled SSF process, although with a decreased in butanol productivity to 0.095 g/(L h). However, using the pre-hydrolysis simultaneous saccharification and fermentation (PSSF) process in the bioreactor with a 7% (w/v) substrate loading led to the highest butanol concentration of 12.84 g/L with a productivity of 0.104 g/(L h). Furthermore, optimizing the SSF process parameters to favor hydrogen resulted in an increased hydrogen yield of 198.27 mL/g-Enset fiber at atmospheric pressure, an initial pH of 8.0, and 37 °C. In general, stirring the SSF process to shift the product ratio to either hydrogen or butanol was possible by adjusting temperature and pressure. At 37 °C and atmospheric pressure, the process resulted in an e-mol yield of 12% for hydrogen and 38% for butanol. Alternatively, at 30 °C and 0.55 bar overpressure, the process achieved a yield of 6% e-mol of hydrogen and 48% e-mol of butanol. This is the first study to produce hydrogen and butanol from Enset fiber using the SSF process and contributes to the development of a circular bioeconomy.

Caproate production from Enset fiber in one-pot two-step fermentation using anaerobic fungi (Neocallimastix cameroonii strain G341) and Clostridium kluyveri DSM 555.

BACKGROUND: Lignocellulosic biomass plays a crucial role in creating a circular bioeconomy and minimizing environmental impact. Enset biomass is a byproduct of traditional Ethiopian Enset food processing that is thrown away in huge quantities. This study aimed to produce caproate from Enset fiber using Neocallimastix cameroonii strain G341 and Clostridium kluyveri DSM 555 in one-pot two-step fermentation. RESULTS: The process started by growing N. cameroonii on Enset fiber as a carbon source for 7 days. Subsequently, the fungal culture was inoculated with active C. kluyveri preculture and further incubated. The results showed that N. cameroonii grew on 0.25 g untreated Enset fiber as the sole carbon source and produced 1.16 mmol acetate, 0.51 mmol hydrogen, and 1.34 mmol formate. In addition, lactate, succinate, and ethanol were detected in small amounts, 0.17 mmol, 0.08 mmol, and 0.7 mmol, respectively. After inoculating with C. kluyveri, 0.3 mmol of caproate and 0.48 mmol of butyrate were produced, and hydrogen production also increased to 0.95 mmol compared to sole N. cameroonii fermentation. Moreover, after the culture was supplemented with 2.18 mmol of ethanol during C. kluyveri inoculation, caproate, and hydrogen production was further increased to 1.2 and 1.36 mmol, respectively, and the consumption of acetate also increased. CONCLUSION: A novel microbial cell factory was developed to convert untreated lignocellulosic Enset fiber into the medium chain carboxylic acid caproate and H2 by a co-culture of the anaerobic fungi N. cameroonii and C. kluyveri. This opens a new value chain for Enset farmers, as the process requires only locally available raw materials and low-price fermenters. As the caproate production was mainly limited by the available ethanol, the addition of locally produced ethanol-containing fermentation broth ("beer") would further increase the titer.

Investigating the Processing Potential of Ethiopian Agricultural Residue Enset/Ensete ventricosum for Biobutanol Production.

The Enset plant is a potential food source for about 20 million Ethiopians. A massive amount of residual byproduct is discarded from traditional Ethiopian Enset food processing. This study shows a compositional analysis of Enset biomass and its use for biobutanol production. The Enset biomass was pretreated with 2% (w/v) NaOH or 2% (v/v) H2SO4 and subjected to enzymatic hydrolysis. The enzymatic hydrolysates were then fermented anaerobically by C. saccharoperbutylacetonicum DSM 14923. The majority of Enset biomass waste samples contained 36-67% cellulose, 16-20% hemicelluloses, and less than 6.8% lignin. In all alkali-pretreated Enset biomass samples, the enzyme converted 80-90% of the biomass to glucose within 24 h, while it took 60 h to convert 48-80% of the acid-pretreated Enset biomass. In addition, the alkali pretreatment method released more glucose than the acid pretreatment in all Enset biomass samples. After 72 h of ABE fermentation, 2.8 g/L acetone, 9.9 g/L butanol, and 1.6 g/L ethanol were produced from mixed Enset waste hydrolysate pretreated with alkali, achieving an ABE yield of 0.32 g/g and productivity of 0.2 g × L-1 × h-1, showing the first value of butanol produced from Enset biomass in the literature.