Advanced Interface Engineering in Gradient Core/Shell Quantum Dots Enables Efficient Photoelectrochemical Hydrogen Evolution.

Semiconductor core/shell quantum dots (QDs) are considered promising building blocks to fabricate photoelectrochemical (PEC) cells for the direct conversion of solar energy into hydrogen (H2). However, the lattice mismatch between core and shell in such QDs results in undesirable defects and severe carrier recombination, limiting photo-induced carrier separation/transfer and solar-to-fuel conversion efficiency. Here, an interface engineering approach is explored to minimize the core-shell lattice mismatch in CdS/CdSexS1-x (x = 0.09-1) core/shell QDs (g-CSG). As a proof-of-concept, PEC cells based on g-CSG QDs yield a remarkable photocurrent density of 13.1 mA cm-2 under AM 1.5 G one-sun illumination (100 mW cm-2), which is ≈54.1% and ≈33.7% higher compared to that in CdS/CdSe0.5S0.5 (g-CSA) and CdS/CdSe QDs (g-CS), respectively. Theoretical calculations and carrier dynamics confirm more efficient carrier separation and charge transfer rate in g-CSG QDs with respect to g-CSA and g-CS QDs. These results are attributed to the minimization of the core-shell lattice mismatch by the cascade gradient shell in g-CSG QDs, which modifies carrier confinement potential and reduces interfacial defects. This work provides fundamental insights into the interface engineering of core/shell QDs and may open up new avenues to boost the performance of PEC cells for H2 evolution and other QDs-based optoelectronic devices.

Bidirectional Superionic Conduction in Surface-Engineered 2D Hexagonal Boron Nitrides.

We designed functionalized hexagonal boron nitride (FhBN) nanoflakes with high proton conductivity in both in- and through-plane directions as next generation polymer electrolyte membranes (PEMs) for energy storage and conversion systems. The synthesis and functionalization of hBN nanoflakes with sulfonic acid (SA) groups are obtained by one-step and in situ liquid-phase exfoliation with excellent dispersibility and stability over a period of three months. The physico/chemical properties of FhBN nanoflakes were investigated by different spectroscopic and microscopic characterization, confirming chemical interactions between hBN lattice and SA groups. High concentrations (65 and 75 wt %) of FhBN nanoflakes composed with Nafion solution formed stable FhBN-Nafion nanocomposite PEMs, offering extra proton conduction sites, doubling ion-exchange capacity, and reducing the swelling ratio compared to those of Nafion. Our results demonstrate that both the in-plane and through-plane proton conductivities of FhBN-Nafion PEMs significantly improve under various conditions comparative to that of Nafion. The maximum values of both in- and through-plane conductivities for FhBN75%-Nafion PEM at 80% of humidity and 80 °C are 0.41 and 0.1 S·cm-1, respectively, which are 7 and 14 times higher than those of Nafion. The bidirectional superionic transport in highly concentrated FhBN PEMs is responsible for outstanding properties, useful for electrochemical energy devices.

Low-Cost, Air-Processed Quantum Dot Solar Cells via Diffusion-Controlled Synthesis.

Despite significant advances in the development of high-efficiency and stable quantum dot (QD) solar cells (QDSCs), recent synthetic and fabrication routes still require improvements to render QDSCs commercially feasible. Here, we describe a low-cost, industrially viable fabrication method of QDSCs under an ambient atmosphere (humid air and room temperature) using stable, high-quality, and small-sized PbS QDs prepared with low-cost, greener precursors [i.e., thioacetamide (TAA)] compared to the widely used bis(trimethylsilyl)sulfide [(TMS)2S], at low temperatures without requiring any stringent conditions. The low reaction temperature, medium reactivity of TAA, and diffusion-controlled particle growth adopted in this approach provide an opportunity to synthesize ultrasmall (emission peak ∼700 nm) to larger PbS QDs (emission peak ∼1050 nm). This also enables well-controlled large-scale (multigram) synthesis with a rough estimated production cost of PbS of 8.11 $ per gram (based on materials cost), which is the lowest among the available PbS QDs produced using wet chemistry routes. QDSCs fabricated using 3.25 nm PbS QDs (bandgap 1.29 eV) under ambient conditions yield a high circuit current density (Jsc) of 32.4 mA/cm2 (one of the highest values of Jsc ever reported) with a power conversion efficiency of 7.8% under 1 sun simulated sunlight at AM 1.5 G (100 mW/cm2). These devices exhibit better photovoltaic performance compared to devices fabricated with more traditional PbS QDs synthesized with (TMS)2S under an ambient atmosphere, confirming the quality of PbS QDs produced with our method. The diffusion-controlled TAA-based synthetic route developed herein is found to be very promising for synthesizing size-tunable PbS QDs for photovoltaic and other optoelectronic applications.

Controlled synthesis of near-infrared quantum dots for optoelectronic devices.

We designed a facile approach for the synthesis of PbS quantum dots (QDs) using thiourea and lead acetate as sources of sulfur and lead, respectively. The sizes of the PbS QDs could be systematically controlled by simply adjusting the reaction parameters. Cd post-treatment via a cation exchange method was performed to increase the stability of QDs. As a proof of concept, colloidal PbS QDs synthesized by using air-stable thiourea were employed as light harvesters for both (i) solar driven photoelectrochemical (PEC) hydrogen generation and (ii) QDs sensitized solar cells (QDSSCs). For PEC hydrogen generation, similar saturated photocurrent densities are observed by using thiourea compared to bis(trimethylsilyl) sulfide, which is air-sensitive and unstable. For QDSSCs, the devices fabricated with QDs synthesized from thiourea reveal a better performance compared to devices fabricated with QDs synthesized from traditional bis(trimethylsilyl) sulfide. Our work demonstrates that this synthetic method is a promising alternative to the existing methodologies of PbS QDs and holds great potential for future solar technologies.