Thermoelectric-cooled terahertz quantum cascade lasers.

We demonstrate the first lasing emission of a thermo-electrically cooled terahertz quantum cascade laser (THz QCL). A high temperature three-well THz QCL emitting at 3.8 THz is mounted to a novel five-stage thermoelectric cooler reaching a temperature difference of ΔT = 124 K. The temperature and time-dependent laser performance is investigated and shows a peak pulse power of 4.4 mW and a peak average output power of 100 µW for steady-state operation.

Broadband multilayer antireflection coating for quantum cascade laser facets.

We demonstrate a broadband multilayer anti-reflection (AR) coating applied to a quantum cascade laser (QCL) facet. The bandwidth of the AR coating was optimized for the range of 8.0 to 12.0 µm to cover the entire emission spectrum of a broad-gain QCL. The laser facets are high-reflectance and AR-coated for use in an external cavity QCL. The AR coating is composed of layers of yttrium fluoride, zinc sulfide, and germanium, all deposited using electron-beam evaporation, and the modal reflectance of the laser facet across the wavelength range was reduced to 0.75%. The external cavity laser performance in a Littrow-type configuration is also described.

External-cavity quantum cascade laser using intra-cavity out-coupling.

We describe an external-cavity quantum cascade laser with an intra-cavity out-coupling optical system, tunable from 8.4 µm to 10.8 µm. The new optical configuration allows higher output power compared to a conventional Littrow-type external cavity approach, while keeping the broad tunability of wavelength. We achieved 1 W output power at the maximum in pulse-mode operation, which is more than twice the optical power using the Littrow design with the same gain chip.

Mid-infrared upconversion based hyperspectral imaging.

Mid-infrared hyperspectral imaging has in the past decade emerged as a promising tool for medical diagnostics. In this work, nonlinear frequency upconversion based hyperspectral imaging in the 6 to 8 µm spectral range is presented for the first time, using both broadband globar and narrowband quantum cascade laser illumination. AgGaS2 is used as the nonlinear medium for sum frequency generation using a 1064 nm mixing laser. Angular scanning of the nonlinear crystal provides broad spectral coverage at every spatial position in the image. This study demonstrates the retrieval of series of monochromatic images acquired by a silicon based CCD camera, using both broadband and narrowband illumination and a comparison is made between the two illumination sources for hyperspectral imaging.

Intracavity photoacoustic sensing of water vapor with a continuously tunable external-cavity quantum-cascade laser operating near 5.5 µm.

A gas sensor integrating a pulsed external-cavity quantum-cascade laser and a photoacoustic (PA) cell placed inside the laser cavity is described. The laser design allows a continuously tunable and mode-hop-free operation with an estimated instrument-limited linewidth of 0.063 cm-1 in Littrow or Littman-Metcalf cavity configurations. Due to higher intracavity power levels, the PA signal for the cell located within the laser cavity is 80-320 times stronger than the signal for the same cell placed outside the cavity. The sensor shows a good capability to identify individual absorption lines of isotopic H2O16, H2O8, and H2O17 species within a narrow spectral interval from 1814 to 1821 cm-1 at natural isotope abundances.

Alignment-stabilized interference filter-tuned external-cavity quantum cascade laser.

A passively alignment-stabilized external cavity quantum cascade laser (EC-QCL) employing a "cat's eye"-type retroreflector and an ultra-narrowband transmissive interference filter for wavelength selection is demonstrated and experimentally investigated. Compared with conventional grating-tuned ECQCLs, the setup is nearly two orders of magnitude more stable against misalignment of the components, and spectral fluctuation is reduced by one order of magnitude, allowing for a simultaneously lightweight and fail-safe construction, suitable for applications outdoors and in space. It also allows for a substantially greater level of miniaturization and cost reduction. These advantages fit in well with the general properties of modern QCLs in the promise to deliver useful and affordable mid-infrared-light sources for a variety of spectroscopic and imaging applications.

Tree array quantum cascade laser.

A monolithic coupling scheme for mid-infrared quantum cascade laser arrays is investigated with respect to brightness enhancement. The tree-shaped resonator enables parallel coupling of six laser elements into a single element by means of several Y-junctions. Phase-locking is observed on the basis of far field analysis, and leads to in-phase emission on both sides of the device. The experimental results match calculated far field profiles and demonstrate a high level of modal control when driven far above threshold. Whereas optical power measurements confirm negligible coupling losses, the slope efficiency is below the theoretically expected value, which is attributed to modal competition. Additional evaluation of near fields and spectral characteristics provides background on the modal dynamics of the sophisticated cavity and reveals limitations to coherent beam combining. The findings pave the way to improved coupling efficiency and brightness scaling of a single facet emitting compact quantum cascade laser array.