A novel DNA vaccine encoding the SRS13 protein administered by electroporation confers protection against chronic toxoplasmosis.

Toxoplasma gondii is an obligate intracellular parasite that can infect a variety of mammals including humans and causes toxoplasmosis. Unfortunately, a protective and safe vaccine against toxoplasmosis hasn't been developed yet. In this study, we developed a DNA vaccine encoding the SRS13 protein and immunized BALB/c mice thrice with pVAX1-SRS13 through the intramuscular route (IM) or intradermally using an electroporation device (ID + EP). The immunogenicity of pVAX1-SRS13 was analyzed by ELISA, Western blot, cytokine ELISA, and flow cytometry. The protective efficacy of the pVAX1-SRS13 was investigated by challenging mice orally with T. gondii PRU strain tissue cysts. The results revealed that pVAX1-SRS13 administered through IM or ID + EP routes induced high level of anti-SRS13 IgG antibody responses (P = 0.0037 and P < 0.0001). The IFN-γ level elicited by the pVAX1-SRS13 (ID + EP) was significantly higher compared to the control group (P = 0.00159). In mice administered with pVAX1-SRS13 (ID + EP), CD8+ cells secreting IFN-γ was significantly higher compared to pVAX1-SRS13 (IM) (P = 0.0035) and the control group (P = 0.0068). Mice vaccinated with the SRS13 DNA vaccine did not induce significant IL-4 level. Moreover, a significant reduction in the number of tissue cysts and the load of T. gondii DNA was detected in brains of mice administered with pVAX1-SRS13 through ID + EP and IM routes compared to controls. In conclusion, the SRS13 DNA vaccine was found to be highly immunogenic and confers strong protection against chronic toxoplasmosis.

Mesoporous silica nanoparticles accommodating electrospun nanofibers as implantable local drug delivery system processed by cold atmospheric plasma and spin coating approaches.

Nanofibers (NF) and nanoparticles are attractive for drug delivery to improve the drug bioavailability and administration. Easy manipulation of NF as macroscopic bulk material give rise to potential usages as implantable local drug delivery systems (LLDS) to overcome the failures of systemic drug delivery systems such as unmet personalized needs, side effects, suboptimal dosage. In this study, poly(ethylene glycol) polyethyleneimine (mPEG:PEI) copolymer blended polyϵ-caprolactone NFs, NFblendaccommodating mesoporous silica nanoparticles (MSN) as the implantable LLDS was achieved by employing spin coating and cold atmospheric plasma (CAP) as the post-process for accommodation on NFblend. The macroporous morphology, mechanical properties, wettability, andin vitrocytocompatibility of NFblendensured their potential as an implantable LLDS and superior features compared to neat NF. The electron microscopy images affirmed of NFblendrandom fiber (average diameter 832 ± 321 nm) alignments and accessible macropores before and after MSN@Cur accommodation. The blending of polymers improved the elongation of NF and the tensile strength which is attributed as beneficial for implantable LLDS. CAP treatment could significantly improve the wettability of NF observed by the contact angle changes from ∼126° to ∼50° which is critical for the accommodation of curcumin-loaded MSN (MSN@Cur) andin vitrocytocompatibility of NF. The combined CAP and spin coating as the post-processes was employed for accommodating MSN@Cur on NFblendwithout interfering with the electrospinning process. The post-processing aided fine-tuning of curcumin dosing (∼3 µg to ∼15 µg) per dose unit and sustained zero-order drug release profile could be achieved. Introducing of MSN@Cur to cells via LLDS promoted the cell proliferation compared to MSN@Cur suspension treatments and assigned as the elimination of adverse effects by nanocarriers by the dosage form integration. All in all, NFblend-MSN@Cur was shown to have high potential to be employed as an implantable LLDS. To the best of our knowledge, this is the first study in which mPEG:PEI copolymer blend NF are united with CAP and spin coating for accommodating nano-drug carriers, which allows for NF both tissue engineering and drug delivery applications.

Polyethylenimine-grafted mesoporous silica nanocarriers markedly enhance the bactericidal effect of curcumin against Staphylococcus aureus biofilm.

The recalcitrant nature of biofilms makes biofilm-associated infections difficult to treat in modern medicine. Biofilms have a high vulnerability to antibiotics and a limited repertoire of antibiotics could act on matured biofilms. This issue has resulted in a gradual paradigm shift in drug discovery and therapy, with anti-biofilm compounds being sought alongside new drug carriers. A potential solution to biofilm-associated infections is to employ antibiofilm treatments, which can attack biofilms from many fronts. Nanocarriers are promising in this regard because they can be entrapped within biofilm matrix, target biofilm matrix, and provide local drug delivery to inhibit biofilm formation. In this study, curcumin as an herbal extract was loaded onto hyperbranched polyethylenimine-grafted mesoporous silica nanoparticles (F-MSN-PEI/Cur) and antibiofilm investigations were performed. The F-MSN-PEI/Cur design has the potential to repurpose curcumin as an antibiofilm agent by increasing its solubility and lowering the required doses for the destruction of matured biofilms as well as suppressing biofilm development. Using imaging and spectroscopic techniques, we assessed the interaction of F-MSN-PEI/Cur with Staphylococcus aureus bacterial cells and determined the impact of F-MSN-PEI/Cur on eradicating matured biofilms and suppressing biofilm development. The F-MSN-PEI/Cur design is highly cytocompatible, as observed by the cytotoxicity screening investigations on L929 mouse fibroblast cell line. Our findings show that F-MSN-PEI/Cur design reduces the bacterial cell viability, inhibits biofilm formation, and induces biofilm eradication, which is attributed to F-MSN-PEI/Cur design having the potential to repurpose the antibiofilm activity of curcumin-herbal extract.

Core@shell structured ceria@mesoporous silica nanoantibiotics restrain bacterial growth in vitro and in vivo.

Due to its modular and flexible design options, mesoporous silica provides ample opportunities when developing new strategies for combinatory antibacterial treatments. In this study, antibacterial ceria (CeO2) nanoparticles (NP) were used as core material, and were further coated with a mesoporous silica shell (mSiO2) to obtain a core@shell structured nanocomposite (CeO2@mSiO2). The porous silica shell was utilized as drug reservoir, whereby CeO2@mSiO2 was loaded with the antimicrobial agent capsaicin (CeO2@mSiO2/Cap). CeO2@mSiO2/Cap was further surface-coated with the natural antimicrobial polymer chitosan by employing physical adsorption. The obtained nanocomposite, CeO2@mSiO2/Cap@Chit, denoted NAB, which stands for "nanoantibiotic", provided a combinatory antibacterial mode of action. The antibacterial effect of NAB on the Gram-negative bacteria Escherichia coli (E.coli) was proven to be significant in vitro. In addition, in vivo evaluations revealed NAB to inhibit the bacterial growth in the intestine of bacteria-fed Drosophila melanogaster larvae, and decreased the required dose of capsaicin needed to eliminate bacteria. As our constructed CeO2@mSiO2 did not show toxicity to mammalian cells, it holds promise for the development of next-generation nanoantibiotics of non-toxic nature with flexible design options.

Recent Advances in the Use of Mesoporous Silica Nanoparticles for the Diagnosis of Bacterial Infections.

Public awareness of infectious diseases has increased in recent months, not only due to the current COVID-19 outbreak but also because of antimicrobial resistance (AMR) being declared a top-10 global health threat by the World Health Organization (WHO) in 2019. These global issues have spiked the realization that new and more efficient methods and approaches are urgently required to efficiently combat and overcome the failures in the diagnosis and therapy of infectious disease. This holds true not only for current diseases, but we should also have enough readiness to fight the unforeseen diseases so as to avoid future pandemics. A paradigm shift is needed, not only in infection treatment, but also diagnostic practices, to overcome the potential failures associated with early diagnosis stages, leading to unnecessary and inefficient treatments, while simultaneously promoting AMR. With the development of nanotechnology, nanomaterials fabricated as multifunctional nano-platforms for antibacterial therapeutics, diagnostics, or both (known as "theranostics") have attracted increasing attention. In the research field of nanomedicine, mesoporous silica nanoparticles (MSN) with a tailored structure, large surface area, high loading capacity, abundant chemical versatility, and acceptable biocompatibility, have shown great potential to integrate the desired functions for diagnosis of bacterial infections. The focus of this review is to present the advances in mesoporous materials in the form of nanoparticles (NPs) or composites that can easily and flexibly accommodate dual or multifunctional capabilities of separation, identification and tracking performed during the diagnosis of infectious diseases together with the inspiring NP designs in diagnosis of bacterial infections.

Coculture of P. aeruginosa and S. aureus on cell derived matrix - An in vitro model of biofilms in infected wounds.

Polymicrobial biofilms are major complications of various chronic infections. Therefore, in vitro biorelevant polymicrobial biofilm models are essential tools for medical studies. This study presents an in vitro model for dual species biofilm of Pseudomonas aeruginosa and Staphylococcus aureus developed on cell-derived matrices (CDMs), in order to simulate the microenvironment of in vivo biofilms. P. aeruginosa and S. aureus are two of the most frequent pathogens in polymicrobial biofilms of wound infections. Although they are commonly isolated from polymicrobial biofilms, their interaction is antagonistic; and there is severe battle between them for nutrients and space. We introduced a nutritious formulation supporting co-cultures of P. aeruginosa and S. aureus in order to study the interaction of these gram-positive and gram-negative bacterial species. Quantitative analyses demonstrated that the enrichment of tryptic soy broth (TSB) with NaCl and glucose facilitate dual-species biofilm formation of P. aeruginosa and S. aureus when it is mixed with fetal bovine serum (FBS). Furthermore, the dual species biofilm was incubated on CDMs. Characterization of the model by fluorescent and electron microscopy techniques revealed realistic features of chronic multi-species biofilms, including competitive distribution pattern of two bacterial species and small-colony variants (SCVs) morphology of S. aureus.

Anti-bacterial activity of inorganic nanomaterials and their antimicrobial peptide conjugates against resistant and non-resistant pathogens.

This review details the antimicrobial applications of inorganic nanomaterials of mostly metallic form, and the augmentation of activity by surface conjugation of peptide ligands. The review is subdivided into three main sections, of which the first describes the antimicrobial activity of inorganic nanomaterials against gram-positive, gram-negative and multidrug-resistant bacterial strains. The second section highlights the range of antimicrobial peptides and the drug resistance strategies employed by bacterial species to counter lethality. The final part discusses the role of antimicrobial peptide-decorated inorganic nanomaterials in the fight against bacterial strains that show resistance. General strategies for the preparation of antimicrobial peptides and their conjugation to nanomaterials are discussed, emphasizing the use of elemental and metallic oxide nanomaterials. Importantly, the permeation of antimicrobial peptides through the bacterial membrane is shown to aid the delivery of nanomaterials into bacterial cells. By judicious use of targeting ligands, the nanomaterial becomes able to differentiate between bacterial and mammalian cells and, thus, reduce side effects. Moreover, peptide conjugation to the surface of a nanomaterial will alter surface chemistry in ways that lead to reduction in toxicity and improvements in biocompatibility.

Mesoporous silica nanoparticles facilitating the dissolution of poorly soluble drugs in orodispersible films.

Orodispersible films (ODF) are immediately dissolving/disintegrating intraoral dosage forms, presented as substitutes of conventional tablets or capsules to ease problems associated with swallowing. Efforts have been made to be able to exploit ODFs as dosage forms for poorly soluble drugs. In the last two decades, mesoporous silica nanoparticles (MSNs) have been extensively used in drug delivery applications to overcome solubility problems of drugs. The tunable features of MSNs make them suitable candidates as drug carriers and solubility enhancers. In this study, the feasibility of MSNs as a carrier of poorly soluble drugs, using prednisolone as a model drug, in ODFs was investigated. Our results revealed that the increased amount of MSNs in ODFs leads to shortening of the disintegration time of the films. Drug content investigations showed that low dose ODFs with prednisolone incorporation efficiencies higher than 80% could be produced. Furthermore, the prednisolone release profile from ODFs can be tuned with the incorporation of MSNs as drug carrier (MSNpred). The MSNpred incorporated ODFs yield with immediate release of drug from the ODF, whereby 90% of the prednisolone content could be released in the first minutes. By modifying the MSNpred design with copolymer surface coating, prednisolone (cop-MSNpred) release can be modulated into a two-step sustained release profile. To sum up, the MSNs platform does not only provide careful low dose incorporation into ODF with high efficiency, but it also aids in tuning the drug release profiles from ODFs.

Modeling of a Hybrid Langmuir Adsorption Isotherm for Describing Interactions Between Drug Molecules and Silica Surfaces.

The interaction between disulfiram (Antabus®) and silica was studied experimentally by adsorption from apolar solvent onto highly porous silica material (Santa Barbara amorphous material-3) with large surface area. The adsorption isotherm was fitted to the Langmuir model by accounting 2 different affinities contributing to the overall behavior, which were attributed to 2 different types of silanol groups (i.e., geminal and vicinal) present on amorphous silica surfaces. This assumption was supported by theoretical calculations. In addition, the model could describe the adsorption of ibuprofen to the carrier material, indicating that the model bears big potential for describing the interactions between silica surfaces and drug molecules.

Inkjet Printing of Drug-Loaded Mesoporous Silica Nanoparticles-A Platform for Drug Development.

Mesoporous silica nanoparticles (MSNs) have shown great potential in improving drug delivery of poorly water soluble (BCS class II, IV) and poorly permeable (BCS class III, IV) drugs, as well as facilitating successful delivery of unstable compounds. The nanoparticle technology would allow improved treatment by reducing adverse reactions of currently approved drugs and possibly reintroducing previously discarded compounds from the drug development pipeline. This study aims to highlight important aspects in mesoporous silica nanoparticle (MSN) ink formulation development for digital inkjet printing technology and to advice on choosing a method (2D/3D) for nanoparticle print deposit characterization. The results show that both unfunctionalized and polyethyeleneimine (PEI) surface functionalized MSNs, as well as drug-free and drug-loaded MSN-PEI suspensions, can be successfully inkjet-printed. Furthermore, the model BCS class IV drug remained incorporated in the MSNs and the suspension remained physically stable during the processing time and steps. This proof-of-concept study suggests that inkjet printing technology would be a flexible deposition method of pharmaceutical MSN suspensions to generate patterns according to predefined designs. The concept could be utilized as a versatile drug screening platform in the future due to the possibility of accurately depositing controlled volumes of MSN suspensions on various materials.

NIR light-activated dual-modality cancer therapy mediated by photochemical internalization of porous nanocarriers with tethered lipid bilayers.

To overcome endo/lysosomal restriction as well as to increase the clinical availability of nanomedicine, we report on a NIR stimuli-responsive nanoplatform based on mesoporous silica nanoparticles tethered with lipid bilayers (MSN@tLB) for chemotherapy and photodynamic dual-modality therapy. In this nanosystem, a hydrophilic drug molecule zoledronic acid (ZOL) was first incorporated into the MSN core with modifications of hyperbranched polyethylenimine (PEI). To prevent the leakage of the payload, the LB shell was covalently tethered onto the MSN core via the PEI cushion which can greatly enhance the stability of the LB. Meanwhile, a hydrophobic photosensitizer IR-780 iodide was introduced into the hydrophobic compartment to endow the system with photo-activation properties. The as-prepared MSN-ZOL@tLB-IR780 possesses high dispersion stability stemming from the LB, as well as negligible cytotoxicity. After cellular internalization and endo/lysosomal capture of the nanoparticles, photochemical internalization (PCI) mediated simultaneous cargo release and endo/lysosomal escape were achieved by local ROS production upon 808 nm irradiation, thus leading to highly efficient chemo-photodynamic therapy on cancer cells in vitro. Such a system presents a sophisticated platform that integrates biocompatibility, spatiotemporal control, NIR-responsiveness, and synergistic therapies to promote cancer therapy.

Modulation of the structural properties of mesoporous silica nanoparticles to enhance the T1-weighted MR imaging capability.

In this study, we have investigated the contrast enhancement of Gd(iii) incorporated nanoparticle-based contrast agents (CA) by the modulation of the synthesis and structural parameters of the mesoporous silica nanoparticle (MSN) matrix. In the optimisation process, the structure of the MSN matrix, post-synthesis treatment protocols, as well as the source and incorporation routes of paramagnetic gadolinium centers were considered, with the aim to shorten the T1 weighted relaxation time. After preliminary evaluation of the prepared MSNs as nanoparticulate T1/positive contrast agents based on relaxivity, the structure of the MSN matrix was affirmed as the most decisive property to enhance the r1 relaxivity value, alongside the incorporation route of paramagnetic Gd(iii) centers. Based on these findings, the most promising Gd(iii) incorporated MSN-based CA candidate was further evaluated for its cytocompatibility and intensity enhancement by in vitro phantom MR-imaging of labeled cells. Furthermore, pre-labeled tumors grown on a chick embryo chorioallantoic membrane (CAM) were imaged as an in vivo model on a 3T clinical MRI scanner. Our findings show that the optimized MSN-based CA design enables proper access of water to Gd-centers in the selected MSN matrices, and simultaneously decreases the required amount of Gd(iii) content per mass when evaluated against the other MSNs. Consequently, the required Gd amount on a per-dose basis is significantly decreased with regard to clinically used Gd-based CAs for T1-weighted MR imaging.

Comparative safety evaluation of silica-based particles.

PURPOSE: Silica nanoparticles (SNPs) are increasingly used as drug delivery systems (DDS) and for biomedical imaging. Therapeutic and diagnostic agents can be incorporated into the silica matrix to improve the stability and dissolution of drug substances in biological systems. However, the safety of SNPs as drug carriers remains controversial. To date, no validated and accepted nano-specific tests exist to predict the potentially harmful impact of these materials on the human body. METHODS: We synthesized by a systematic approach 12 different types of SNPs with varying size, surface topology (porous vs non-porous), and surface modifications. We characterized these particles in terms of dry state and hydrodynamic diameter, specific surface area, and net surface charge (ζ-potential). For cellular studies, we exposed non-phagocytic (HepG2) cells, phagocytic (THP-1) cells, and erythrocytes to SNPs. Cellular uptake and stability of fluorescently labeled SNPs were analyzed by confocal microscopy and flow cytometry. RESULTS: SNPs with a porous surface and negative net surface charge had the strongest impact on cell viability. This is in contrast to non-porous SNPs. None of the studied particles induced oxidative stress in either cell lines. Particles with a negative surface charge induced hemolysis in a concentration-dependent manner. CONCLUSIONS: Physico-chemical properties promoting cytotoxicity and hemolysis were investigated. Our study revealed potential hazards of spherical amorphous SNPs.

Functionalization of graphene oxide nanostructures improves photoluminescence and facilitates their use as optical probes in preclinical imaging.

Recently reported photoluminescent nanographene oxides (nGOs), i.e. nanographene oxidised with a sulfuric/nitric acid mixture (SNOx method), have tuneable photoluminescence and are scalable, simple and fast to produce optical probes. This material belongs to the vast class of photoluminescent carbon nanostructures, including carbon dots, nanodiamonds (NDs), graphene quantum dots (GQDs), all of which demonstrate a variety of properties that are attractive for biomedical imaging such as low toxicity and stable photoluminescence. In this study, the nGOs were organically surface-modified with poly(ethylene glycol)-poly(ethylene imine) (PEG-PEI) copolymers tagged with folic acid as the affinity ligand for cancer cells expressing folate receptors. The functionalization enhanced both the cellular uptake and quantum efficiency of the photoluminescence as compared to non-modified nGOs. The nGOs exhibited an excitation dependent photoluminescence that facilitated their detection with a wide range of microscope configurations. The functionalized nGOs were non-toxic, they were retained in the stained cell population over a period of 8 days and they were distributed equally between daughter cells. We have evaluated their applicability in in vitro and in vivo (chicken embryo CAM) models to visualize and track migratory cancer cells. The good biocompatibility and easy detection of the functionalized nGOs suggest that they could address the limitations faced with quantum dots and organic fluorophores in long-term in vivo biomedical imaging.

Rational evaluation of the utilization of PEG-PEI copolymers for the facilitation of silica nanoparticulate systems in biomedical applications.

HYPOTHESIS: Polymer constructs are often applied in nanoparticulate systems to expand their applicability. One such common macromolecular modifier is poly(ethylene imine) - poly(ethylene glycol) copolymers. Despite their quite widespread use, and considering that interaction and stabilization mechanisms when combining a polyelectrolyte with a non-charged polymer are not trivial to pinpoint, these systems are generally poorly characterized in literature. Here, we attempt to provide a solid rationale to utilize PEG-PEI copolymers as surface modifiers and stabilizers/dispersion agents in solid colloidal systems with focus on biomedical applicability. EXPERIMENTAL: mPEG grafted PEI copolymers with two different grafting densities and 100 nm sized non-porous silica nanoparticles (SiNP) were synthesized. Detailed physico-chemical characterization of all prepared materials was conducted with spectroscopic methods, while the interaction mechanisms between the produced copolymers and SiNP were investigated by calorimetry. The influence of increased PEG grafting ratio on the attained colloidal stability of copolymer functionalized SiNP was studied by multiple light scattering, and its further implications on the biobehavior of SiNP were evaluated. FINDINGS: The interaction mechanism between SiNP and copolymers was concluded to be mainly directed by electrostatics, whereas an influence of PEG grafting density on the adsorption process was also observed. The implications of the surface modifications on the in vitro biobehavior of SiNP were investigated by combining the knowledge obtained by the detailed characterizations with microscopy evaluation under in vitro conditions.