RESUMO
Perovskite photovoltaics (PePVs) tend to suffer from a high density of defects that restrict the device in terms of performances and stability. Therefore, defect passivation and film-quality improvement of perovskite active layers are crucial for high-performance PePVs. In this work, 2-chloroethyl acrylate (CEA) with CâO and -Cl groups in Cs0.175FA0.750MA0.075Pb (I0.880Br0.120) precursor solutions is introduced as a novel bifunctional additive to act as both a defect passivator and perovskite-growth controller. With the aid of CEA, the perovskite crystallinity and average grain size are improved, and perovskite defects are effectively reduced, thus increasing the representative efficiency (PCE = 19.32%). PePVs with CEA also maintain their initial efficiency of 85% even after about 500 h under air conditions with a humidity of 40 ± 5%. As a result, this study proves that the novel additive CEA can produce higher PePV efficiency and more stable devices.
RESUMO
Solution-processable graphenes (represented by reduced graphene oxides, rGOs) have shown promising abilities as HTLs in perovskite solar cells (PeSCs). However, there has been no attempt to systematically tailor the characteristics of rGOs to the specifications of PeSCs. Furthermore, the applications of rGO HTLs have been limited to the spin-coating system, which is incompatible with roll-to-roll manufacturing. Here, with the aid of a polymer-graphene hybrid structure and a controllable synthesis method, we successfully developed a much more feasible rGO HTL and demonstrated highly efficient, stable, and printable p-i-n planar PeSCs with facile one-step processing. The characteristics of the developed polyacrylonitrile-grafted rGOs (PRGOs) were optimized by varying the synthesis conditions including the γ-radiation intensity (200, 400, and 600 kGy) and the concentration of the acrylonitrile (AN) precursor (2, 4, and 6 wt%). It is revealed that the PRGO synthesized with a lower AN concentration and a higher irradiation intensity (PRGO_2-600) is the most suitable one for PeSC HTL. PRGO_2-600 effectively raises the average power conversion efficiencies (PCEs) of PeSCs by â¼36% compared to those of conventional PeSCs using PEDOT:PSS HTL. The comprehensive investigations confirm that the enhanced device efficiency stems from (1) the favorable interlayer characteristics of the PRGO itself and (2) the well-crystallized perovskite layer grown on the PRGO. In addition to the PCE, thechemically inert PRGOs can also maintain their electrical properties over time and retard the decomposition of perovskite films, thereby prolonging the operation time of PeSCs in the atmosphere. More importantly, the applicability of the PRGO HTL is clearly verified even in the roll-to-roll compatible slot-die coating system, exhibiting comparable performances to those of the spin-coating system.
RESUMO
In this data article, we introduced the hysteresis of planar perovskite solar cells (PSCs) fabricated using dimethylformamide (DMF), gamma-butyrolactone (GBL), methyl-2-pyrrolidinone (NMP), dimethylsulfoxide (DMSO), DMF-DMSO, GBL-DMSO and NMP-DMSO as perovskite precursor solutions according to different scan directions, sweep times, and current stability. The hysteresis analyses of the planar PSCs prepared with a glass-ITO /NiOX/perovskite /PC61BM/BCP/Ag configuration were measured with Keithley 2400 source meter unit under 100 mW/cm2 (AM 1.5 G). The data collected in this article compares the hysteresis of PSCs with different solvents and is directly related to our research article "High-Performance Planar Perovskite Solar Cells: Influence of Solvent upon Performance" (You-Hyun Seo et al., 2017 [1]).
RESUMO
The highly efficient CH3NH3PbI3 perovskite solar cell (PeSC) is simply achieved by employing a blended electron-transport layer (ETL) consisting of PC61BM and P(NDI2OD-T2). The high molecular weight of P(NDI2OD-T2) allows for a thinned ETL with a uniform morphology that optimizes the PC61BM ETL more effectively. As a result of this enhancement, the power conversion efficiency of a PC61BM:P(NDI2OD-T2)-based PeSC is 25% greater than that of the conventional PC61BM based-PeSC; additionally, the incorporation of P(NDI2OD-T2) into PC61BM attenuates the dependence of the PeSC on the ETL-processing conditions regarding its performance. It is revealed that, in addition to the desirable n-type semiconducting characteristics of PC61BM:P(NDI2OD-T2)-including a higher electron-mobility and a more-effective electron selectivity of a blended ETL for an efficient electron extraction-the superior performance of a PC61BM:P(NDI2OD-T2) device is the result of a thinned and uniformly covered ETL on the perovskite layer.