RESUMO
Road traffic injuries present a significant public health burden, especially in developing countries. This systematic review and meta-analysis synthesized global evidence on motorcycle helmet use prevalence by including 299 records across 249 articles involving 5,006,476 participants from 1982 to 2022. The findings revealed a declining trend in helmet use prevalence over the past four decades, with an overall prevalence of 48.71%. The meta-regression analysis did not find any statistically significant change in the overall prevalence. Subgroup analysis showed higher helmet use prevalence in observation/survey records (54.29%) compared to crashed patient records (44.84%). Riders/Motorcyclists demonstrated a higher likelihood of wearing helmets than passengers in both observation/survey records (62.61 vs. 28.23%) and crashed patient records (47.76 vs. 26.61%). Countries with mandatory helmet use laws had higher helmet usage prevalence compared to those without (52.26 vs. 37.21%). The African continent had the lowest helmet use rates, while Latin America and the Caribbean regions had higher rates. This study provides a comprehensive overview of global helmet use prevalence, emphasizing disparities between high and low-income countries, variations in law enforcement, and trends over four decades. Targeted interventions are necessary to improve helmet-wearing habits, especially among passengers and regions with low usage rates. Effective legislation and awareness campaigns are crucial for promoting helmet use and reducing road traffic injuries burden.
RESUMO
BACKGROUND: Road traffic injuries (RTI) are one of the most prominent causes of morbidity and mortality, especially among children and young adults. Motorcycle crashes constitute a significant part of RTIs. Policymakers believe that safety helmets are the single most important protection against motorcycle-related injuries. However, motorcyclists are not wearing helmets at desirable rates. This study systematically investigated factors that are positively associated with helmet usage among two-wheeled motorcycle riders. METHODS: We performed a systematic search on PubMed, Scopus, Web of Science, Embase, and Cochrane library with relevant keywords. No language, date of publication, or methodological restrictions were applied. All the articles that had evaluated the factors associated with helmet-wearing behavior and were published before December 31, 2021, were included in our study and underwent data extraction. We assessed the quality of the included articles using the Strengthening the Reporting of Observational Studies in Epidemiology (STROBE) checklist for observational studies. RESULTS: A total of 50 articles were included. Most evidence suggests that helmet usage is more common among drivers (compared to passengers), women, middle-aged adults, those with higher educations, married individuals, license holders, and helmet owners. Moreover, the helmet usage rate is higher on highways and central city roads and during mornings and weekdays. Travelers of longer distances, more frequent users, and riders of motorcycles with larger engines use safety helmets more commonly. Non-helmet-using drivers seem to have acceptable awareness of mandatory helmet laws and knowledge about their protective role against head injuries. Importantly, complaint about helmet discomfort is somehow common among helmet-using drivers. CONCLUSIONS: To enhance helmet usage, policymakers should emphasize the vulnerability of passengers and children to RTIs, and that fatal crashes occur on low-capacity roads and during cruising at low speeds. Monitoring by police should expand to late hours of the day, weekends, and lower capacity and less-trafficked roads. Aiming to enhance the acceptance of other law-abiding behaviors (e.g., wearing seat belts, riding within the speed limits, etc.), especially among youth and young adults, will enhance the prevalence of helmet-wearing behavior among motorcycle riders. Interventions should put their focus on improving the attitudes of riders regarding safety helmets, as there is acceptable knowledge of their benefits.
Assuntos
Acidentes de Trânsito , Traumatismos Craniocerebrais , Pessoa de Meia-Idade , Adulto Jovem , Adolescente , Criança , Humanos , Feminino , Acidentes de Trânsito/prevenção & controle , Traumatismos Craniocerebrais/epidemiologia , Traumatismos Craniocerebrais/prevenção & controle , Traumatismos Craniocerebrais/etiologia , Cintos de Segurança , Polícia , Dispositivos de Proteção da Cabeça , MotocicletasRESUMO
Astrocyte cells play a critical role in the mechanical behaviour of the brain tissue; hence understanding the properties of Astrocytes is a big step toward understanding brain diseases and abnormalities. Conventionally, atomic force microscopy (AFM) has been used as one of the most powerful tools to characterize the mechanical properties of cells. However, due to the complexities of experimental work and the complex behaviour of living cells, the finite element method (FEM) is commonly used to estimate the cells' response to mechanical stimulations. In this study, we developed a finite element model of the Astrocyte cells to investigate the effect of two key parameters that could affect the response of the cell to mechanical loading; the properties of the underlying substrate and the nucleus. In this regard, the cells were placed on two different substrates in terms of thickness and stiffness (gel and glass) with varying properties of the nucleus. The main achievement of this study was to develop an insight to investigate the response of the Astrocytes to mechanical loading for future studies, both experimentally and computationally.
Assuntos
Astrócitos , Núcleo Celular , Fenômenos Biomecânicos , Análise de Elementos Finitos , Microscopia de Força Atômica , Estresse MecânicoRESUMO
The mechanical properties and microstructure of brain tissue, as its two main physical parameters, could be affected by mechanical stimuli. In previous studies, microstructural alterations due to mechanical loading have received less attention than the mechanical properties of the tissue. Therefore, the current study aimed to investigate the effect of ex-vivo mechanical forces on the micro-architecture of brain tissue including axons and glial cells. A three-step loading protocol (i.e., loading-recovery-loading) including eight strain levels from 5% to 40% was applied to bovine brain samples with axons aligned in one preferred direction (each sample experienced only one level of strain). After either the first or secondary loading step, the samples were fixed, cut in planes parallel and perpendicular to the loading direction, and stained for histology. The histological images were analyzed to measure the end-to-end length of axons and glial cell-cell distances. The results showed that after both loading steps, as the strain increased, the changes in the cell nuclei arrangement in the direction parallel to axons were more significant compared to the other two perpendicular directions. Based on this evidence, we hypothesized that the spatial pattern of glial cells is highly affected by the orientation of axonal fibers. Moreover, the results revealed that in both loading steps, the maximum cell-cell distance occurred at 15% strain, and this distance decreased for higher strains. Since 15% strain is close to the previously reported brain injury threshold, this evidence could suggest that at higher strains, the axons start to rupture, causing a reduction in the displacement of glial cells. Accordingly, it was concluded that more attention to glial cells' architecture during mechanical loading may lead to introduce a new biomarker for brain injury.
Assuntos
Lesões Encefálicas , Neuroglia , Humanos , Animais , Bovinos , Estresse Mecânico , Fenômenos Mecânicos , Axônios/patologia , Lesões Encefálicas/patologiaRESUMO
BACKGROUND: Recorded advancements in nerve tissue regeneration have still not provided satisfactory results, and complete physiological recovery is not assured. The engineering of nanofibrous scaffolds provides a suitable platform for stem cell transplantation by controlling cell proliferation and differentiation to replace lost cells. In this study, a conductive scaffold was fabricated by in situ synthesis of gold nanoparticles (Au-NPs) on electrospun polycaprolactone/chitosan nanofibrous scaffolds and its effect on neural differentiation of mesenchymal stem cells was investigated. METHOD: The conductive scaffold was prepared using polycaprolactone/chitosan solution containing soluble Au ions by electrospinning approach. In situ synthesis of Au-NPs was conducted using two reducing agents, Tetrakis(hydroxymethyl)phosphonium chloride (THPC) as an organophosphorus compound and formaldehyde, and also different reduction times. Morphology and distribution of the Au-NPs on the nanofibrous scaffolds were assessed using field emission scanning electron microscopy (FE-SEM) and energy dispersed X-ray spectroscopy (EDX). The hydrophilicity and biocompatibility of the scaffolds were determined by water contact angle and MTT assays respectively. The characterization of the scaffolds was proceeded by testing the porosity, tensile strength and electrical conductivity. Also, the scaffold's ability to support neural differentiation of mesenchymal stem cells was evaluated by immune-staining/blotting of Beta tubulin III. RESULTS & CONCLUSION: FE-SEM and EDX results demonstrated the uniform distribution of Au-NPs on electrospun nanofibers made of a combination of polycaprolactone and chitosan (PCL/CS). We found that electrical conductivity of the scaffolds fabricated using THPC for 4 days and formaldehyde for 7 days was in the range of electrical conductivity of the scaffolds suitable for nerve regeneration. Contact angle measurements showed the effect of Au-NPs on the hydrophilic properties of the scaffolds, where the scaffold showed the porosity of 50% in the presence of Au-NPs. Au-NPs decoration on the scaffold decreased the mechanical properties with the ultimate strength of 14 (MPa). In vitro assessment demonstrated the potential of the fabricated conductive scaffold to enhance the attachment and proliferation of fibroblast cells, and differentiation potential of mesenchymal stem cells toward neuron-like cells. This designed scaffold holds promise as a future carrier and delivery platform in nerve tissue engineering.
Assuntos
Quitosana , Nanopartículas Metálicas , Quitosana/química , Condutividade Elétrica , Formaldeído , Ouro/química , Substâncias Redutoras , Alicerces Teciduais/químicaRESUMO
Background: Road traffic crashes (RTCs) and its associated injuries are one of the most important public health problems in the world. In Iran, RTCs rank second in terms of mortality. To address this issue, there is a need for research-based interventions. Prioritizing researches using a variety of approaches and frameworks to determine the most effective interventions is a key nodal point in the RTCs' research policy planning cycle. Thus, this study aims to generate and prioritize research questions in the field of RTCs in Iran. Methods: By adapting the Child Health and Nutrition Research Initiative (CHNRI) method, this study engaged 25 prominent Iranian academic leaders having role in setting Iran's long-term road safety goals, a group of research funders, and policymakers. The experts' proposed research questions were independently scored on a set of criteria: feasibility, impact on health, impact on the economy, capacity building, and equity. Following the prioritization of Research Questions (RQs), they were all classified using the 5 Pillar frameworks. Results: In total, 145 Research Questions were systematically scored by experts against five criteria. Iran's top 20 road traffic safety priorities were established. The RQs related to "road safety management" and "road and infrastructure" achieved a high frequency. Conclusions: The top 20 research questions in the area of RTCs in Iran were determined by experts. The majority of these RQs were related to "road safety management". The results of this study may contribute to the optimal use of resources in achieving long-term goals in the prevention and control of road traffic crashes and its related injuries. Considering these RQs as research investment options will improve the current status of Road Traffic Injuries (RTIs) at a national level and further advance toward compliance with international goals. If these research priorities are addressed, and their findings are implemented, we can anticipate a significant reduction in the number of crashes, injuries, and deaths.
Assuntos
Acidentes de Trânsito , Objetivos , Acidentes de Trânsito/prevenção & controle , Criança , Humanos , Irã (Geográfico)/epidemiologia , Saúde Pública , PesquisaRESUMO
Road Traffic Injuries (RTIs) have imposed a great global burden on public health. Motorcyclists and pedestrians comprise the most significant proportion of this burden. Several studies have demonstrated a link between helmet wearing and a decline in the impact of RTIs in motorcyclists. In this study, we aimed to review the barriers to helmet utilization by motorcyclists. This scoping review has been conducted in accordance with the guidelines for the systematic review of observational studies and the PRISMA Checklist. The search was conducted by using related keywords in EMBASE, PubMed, Scopus, and Cochrane Library. Four independent reviewers carried out the screening. The main outcomes of interest were barriers to helmet usage among motorcyclists, drawn from the finally included studies. Fifty-three records were selected for data extraction. According to these reports, the barriers and factors associated with helmet usage among motorcyclists were categorized into five entities as: legislations/enforcement strategies, helmet disadvantages (discomfort, visual/auditory blockage, and thermal dysregulation), risky behaviors (riding while drunk or high on drugs), sex and/or age factors, and the location and time of the injury event (rural vs. urban locations, day vs. night riding). From the perspective of policymakers, the findings of this review are of utmost importance and could be used in addressing the challenge of inadequate compliance with helmet use.
Assuntos
Traumatismos Craniocerebrais , Dispositivos de Proteção da Cabeça , Acidentes de Trânsito/prevenção & controle , Fatores Etários , Traumatismos Craniocerebrais/prevenção & controle , Humanos , Motocicletas , Assunção de RiscosRESUMO
BACKGROUND: Protective helmets may reduce the risk of death and head injury in motorcycle collisions. However, there remains a large gap in knowledge regarding the effectiveness of different types of helmets in preventing injuries. OBJECTIVE: To explore and evaluate the effectiveness of different types of motorcycle helmets; that is the association between different helmet types and the incidence and severity of head, neck, and facial injuries among motorcyclists. Also, to explore the effect of different helmet types on riders. METHODS: A systematic search of different scientific databases was conducted from 1965 to April 2019. A scoping review was performed on the included articles. Eligible articles were included regarding defined criteria. Study characteristics, helmet types, fixation status, retention system, the prevention of injury or reduction of its severity were extracted. RESULTS: A total of 137 studies were included. There was very limited evidence for the better protection of full-face helmets from head and facial injury compared to open-face and half-coverage helmets. There was however scarce evidence for the superiority of a certain helmet type over others in terms of protection from neck injury. The retention system and the fixation status of helmets were two important factors affecting the risk of head and brain injury in motorcyclists. Helmets could also affect and limit the riders in terms of vision, hearing, and ventilation. Multiple solutions have been discussed to mitigate these effects. CONCLUSION: Full-face helmets may protect head and face in motorcycle riders more than open-face and half-coverage helmets, but there is not enough evidence for better neck protection among these three helmet types. Helmets can affect the rider's vision, hearing, and ventilation. When designing a helmet, all of these factors should be taken into account.
Assuntos
Traumatismos Craniocerebrais , Traumatismos Faciais , Acidentes de Trânsito , Traumatismos Craniocerebrais/prevenção & controle , Traumatismos Faciais/prevenção & controle , Dispositivos de Proteção da Cabeça , Humanos , MotocicletasRESUMO
Replacement of peripheral nerve autografts with tissue engineered nerve grafts will potentially resolve the lack of nerve tissue especially in patients with severe concomitant soft tissue injuries. This study attempted to fabricate a tissue engineered nerve graft composed of electrospun PCL conduit filled with collagen-hyaluronic acid (COL-HA) sponge with different COL-HA weight ratios including 100:0, 98:2, 95:5 and 90:10. The effect of HA addition on the sponge porosity, mechanical properties, water absorption and degradation rate was assessed. A good cohesion between the electrospun PCL nanofibers and COL-HA sponges were seen in all sponges with different HA contents. Mechanical properties of PCL nanofibrous layer were similar to the rat sciatic nerve; the ultimate tensile strength was 2.23 ± 0.35 MPa at the elongation of 35%. Additionally, Schwann cell proliferation and morphology on three dimensional (3D) composite scaffold were evaluated by using MTT and SEM assays, respectively. Rising the HA content resulted in higher water absorption as well as greater pore size and porosity, while a decrease in Schwann cell proliferation compared to pure collagen sponge, although reduction in cell proliferation was not statistically significant. The lower Schwann cell proliferation on the COL-HA was attributed to the greater degradation rate and pore size of the COL-HA sponges. Also, dorsal root ganglion assay showed that the engineered 3D construct significantly increases axon growth. Taken together, these results suggest that the fabricated 3D composite scaffold provide a permissive environment for Schwann cells proliferation and maturation and can encourage axon growth.
Assuntos
Nanofibras/química , Regeneração Nervosa , Poliésteres/química , Alicerces Teciduais/química , Animais , Proliferação de Células , Células Cultivadas , Nanofibras/ultraestrutura , Ratos Wistar , Células de Schwann/citologia , Engenharia Tecidual/métodosRESUMO
Brain, the most important component of the central nervous system (CNS), is a soft tissue with a complex structure. Understanding the role of brain tissue microstructure in mechanical properties is essential to have a more profound knowledge of how brain development, disease, and injury occur. While many studies have investigated the mechanical behavior of brain tissue under various loading conditions, there has not been a clear explanation for variation reported for material properties of brain tissue. The current study compares the ex-vivo mechanical properties of brain tissue under two loading modes, namely compression and tension, and aims to explain the differences observed by closely examining the microstructure under loading. We tested bovine brain samples under uniaxial tension and compression loading conditions, and fitted hyperelastic material parameters. At 20% strain, we observed that the shear modulus of brain tissue in compression is about 6 times higher than in tension. In addition, we observed that brain tissue exhibited strain-stiffening in compression and strain-softening in tension. In order to investigate the effect of loading modes on the tissue microstructure, we fixed the samples using a novel method that enabled keeping the samples at the loaded stage during the fixation process. Based on the results of histology, we hypothesize that during compressive loading, the strain-stiffening behavior of the tissue could be attributed to glial cell bodies being pushed against surroundings, contacting each other and resisting compression, while during tension, cell connections are detached and the tissue displays softening behavior.
Assuntos
Substância Branca/fisiologia , Animais , Fenômenos Biomecânicos , Bovinos , Força Compressiva , Modelos Biológicos , Neuroglia/fisiologia , Estresse Mecânico , Substância Branca/anatomia & histologiaRESUMO
Despite more than half a century of work on the brain biomechanics, there are still significant unknowns about this tissue. Since the brain is highly susceptible to injury, damage biomechanics has been one of the main areas of interest to the researchers in the field of brain biomechanics. In many previous studies, mechanical properties of brain tissue under sub-injury and injury level loading conditions have been addressed; however, to the best of our knowledge, the role of cell-cell interactions in the mechanical behavior of brain tissue has not been well examined yet. This note introduces the hypothesis that gap junctions as the major type of cell-cell junctions in the brain tissue play a pivotal role in the mechanical properties of the tissue and their failure during injury leads to changes in brain's material properties. According to this hypothesis, during an injury, the gap junctions are damaged, leading to a decrease in tissue stiffness, whereas following the injury, new junction proteins are expressed, leading to an increase in tissue stiffness. We suggest that considering the mechanobiological effect of gap junctions in the material properties of brain tissue may help better understand the brain injury mechanism.
Assuntos
Lesões Encefálicas , Junções Comunicantes , Fenômenos Biomecânicos , Encéfalo , Comunicação Celular , HumanosRESUMO
The aim of this study was to investigate the net effect of raw carbon nanotube (CNTs) on the final properties of polyurethane (PU)/CNT composites considering their biomedical applications. So, neat PU and PU/CNT composites containing different amounts of CNTs (0.05%, 0.1%, 0.5%, and 1%) were prepared by electrospinning. Electrospinning parameters optimized to have a bead-free structure with no significant difference between their mean fiber diameter and porosity percentage. The results showed adding CNTs caused an increase in crystallinity percentage, water absorption ratio, young modulus, toughness, conductivity, degradation time in an accelerated medium, clotting time, and human umbilical vein endothelial cells adhesion. But a direct relationship between CNT percentage and the calcium adsorption was not detected. Moreover, no significant cytotoxicity was observed for 7-day extracts of all samples. These nanocomposites have a vast range of properties which make them a good candidate as neural, cardiovascular, osseous biomaterials or tendon, and ligament substitute.
Assuntos
Nanocompostos , Nanotubos de Carbono , Materiais Biocompatíveis , Condutividade Elétrica , Humanos , PoliuretanosRESUMO
A more Accurate description of the mechanical behavior of brain tissue could improve the results of computational models. While most studies have assumed brain tissue as an incompressible material with constant Poisson's ratio of almost 0.5 and constructed their modeling approach according to this assumption, the relationship between this ratio and levels of applied strains has not yet been studied. Since the mechanical response of the tissue is highly sensitive to the value of Poisson's ratio, this study was designed to investigate the characteristics of the Poisson's ratio of brain tissue at different levels of applied strains. Samples were extracted from bovine brain tissue and tested under unconfined compression at strain values of 5%, 10%, and 30%. Using an image processing method, the axial and transverse strains were measured over a 60-s period to calculate the Poisson's ratio for each sample. The results of this study showed that the Poisson's ratio of brain tissue at strain levels of 5% and 10% was close to 0.5, and assuming brain tissue as an incompressible material is a valid assumption at these levels of strain. For samples under 30% compression, this ratio was higher than 0.5, which could suggest that under strains higher than the brain injury threshold (approximately 18%), tissue integrity was impaired. Based on these observations, it could be concluded that for strain levels higher than the injury threshold, brain tissue could not be assumed as an incompressible material, and new material models need to be proposed to predict the material behavior of the tissue. In addition, the results showed that brain tissue under unconfined compression uniformly stretched in the transverse direction, and the bulging in the samples is negligible.
Assuntos
Substância Branca , Animais , Bovinos , Estresse Mecânico , Substância Branca/diagnóstico por imagemRESUMO
Brainstem, which connects the distal part of the brain and the spinal cord, contains main motor and sensory nerves and facilitates communication between the cerebrum, cerebellum, and spinal cord. Due to the complicated anatomy and neurostructure of brainstem, surgical interventions to resect brainstem tumors are particularly challenging, and new approaches to reduce the risk of surgical brain injury are of utmost importance. Although previous studies have investigated the structural anisotropy of brain white matter, the effect of axonal fibers on the mechanical properties of white matter has not yet been fully understood. The current study aims to compare the effect of axonal orientation on changes in material properties of brainstem under large deformations and failure through a novel approach. Using diffusion tensor imaging (DTI) on ex-vivo bovine brains, we determined the orientation of axons in brainstem. We extracted brainstem samples in two orthogonal directions, parallel and perpendicular to the axons, and subjected to uniaxial tension to reach the failure at loading rates of 50 mm/min and 150 mm/min. The results showed that the tearing energy and failure strain of samples with axons parallel to the force direction were approximately 1.5 times higher than the samples with axons perpendicular to the force direction. The results also revealed that as the sample's initial length increases, its failure strain decreases. These results emphasize the importance of the axon orientation in the mechanical properties of brainstem, and suggest that considering the directional-dependent behavior for this tissue could help to propose new surgical interventions for reducing the risk of injury during tumor resection.
Assuntos
Axônios , Imagem de Tensor de Difusão , Animais , Anisotropia , Tronco Encefálico/diagnóstico por imagem , Tronco Encefálico/cirurgia , Bovinos , Humanos , Medula EspinalRESUMO
Brain's micro-structure plays a critical role in its macro-structure material properties. Since the structural anisotropy in the brain white matter has been introduced due to axonal fibers, considering the direction of axons in the continuum models has been mediated to improve the results of computational simulations. The aim of the current study was to investigate the role of fiber direction in the material properties of brain white matter and compare the mechanical behavior of the anisotropic white matter and the isotropic gray matter. Diffusion tensor imaging (DTI) was employed to detect the direction of axons in white matter samples, and tensile stress-relaxation loads up to 20% strains were applied on bovine gray and white matter samples. In order to calculate the nonlinear and time-dependent properties of white matter and gray matter, a visco-hyperelastic model was used. The results indicated that the mechanical behavior of white matter in two orthogonal directions, parallel and perpendicular to axonal fibers, are significantly different. This difference indicates that brain white matter could be assumed as an anisotropic material and axons have contribution in the mechanical properties. Also, up to 15% strain, white matter samples with axons parallel to the force direction are significantly stiffer than both the gray matter samples and white matter samples with axons perpendicular to the force direction. Moreover, the elastic moduli of white matter samples with axons both parallel and perpendicular to the loading direction and gray matter samples at 15-20% strain are not significantly different. According to these observations, it is suggested that axons have negligible roles in the material properties of white matter when it is loaded in the direction perpendicular to the axon direction. Finally, this observation showed that the anisotropy of brain tissue not only has effects on the elastic behavior, but also has effects on the viscoelastic behavior.
Assuntos
Axônios/fisiologia , Substância Branca/fisiologia , Animais , Anisotropia , Fenômenos Biomecânicos , Bovinos , Imagem de Tensor de Difusão , Imageamento por Ressonância Magnética , Estresse Mecânico , Substância Branca/diagnóstico por imagemRESUMO
Although brain, one of the most complex organs in the mammalian body, has been subjected to many studies from physiological and pathological points of view, there remain significant gaps in the available knowledge regarding its biomechanics. This article reviews the research trends in brain biomechanics with a focus on injury. We used published scientific articles indexed by Web of Science database over the past 40 years and tried to address the gaps that still exist in this field. We analyzed the data using VOSviewer, which is a software tool designed for scientometric studies. The results of this study showed that the response of brain tissue to external forces has been one of the significant research topics among biomechanicians. These studies have addressed the effects of mechanical forces on the brain and mechanisms of traumatic brain injury, as well as characterized changes in tissue behavior under trauma and other neurological diseases to provide new diagnostic and monitoring methods. In this study, some challenges in the field of brain injury biomechanics have been identified and new directions toward understanding the gaps in this field are suggested.
Assuntos
Encéfalo , Fenômenos Mecânicos , Fenômenos Biomecânicos , Lesões Encefálicas , HumanosRESUMO
Characterization of the mechanical properties of native and synthetic vascular grafts is an essential task in the process of designing novel vascular constructs. The aim in this study was to compare the mechanical behavior of ovine left Subclavian artery with that of POSS-PCU (a commercial biomaterial which is currently under clinical investigation. ClinicalTrials.gov Identifier: NCT02301312). We used Delfino's strain energy potential within the framework of quasilinear viscoelasticity theory to capture the viscoelastic response of the considered materials. The material parameters of the quasilinear viscoelastic constitutive equation were determined through a combination of experimental and computational method. First, a uniaxial tensile testing device was used to perform a series of stress relaxation tests on ring samples. Then, the derived quasilinear viscoelastic models were implemented into finite element system. With the aid of mechanical experimentation and finite element simulation, the material parameters were obtained, modified and used for comparison of the mechanical properties of vascular walls. The results showed that the stiffness and the long term viscoelastic parameters of POSS-PCU may lead to different stress responses of the vascular walls. These two factors can be improved by modifications in manufacturing parameters of the synthetic vessel.
Assuntos
Aorta Torácica/fisiologia , Materiais Biocompatíveis/análise , Próteses e Implantes , Animais , Elasticidade , Humanos , Modelos Biológicos , Ovinos , Estresse Mecânico , ViscosidadeRESUMO
Despite great advances in tissue engineering, there have been very few reports on the successful clinical use of small-diameter tissue-engineered vascular grafts (TEVGs). Small-diameter (<6 mm internal diameter) is considered as unmet clinical need. This review critically examines the role of stem cells that have been proposed and used in development of TEVGs, and assesses the viability of such graft to clinical pathway. With over 20 years of expertise in development of bypass graft and a number of grafts under clinical trial, this team will offer potential areas for future research that may help improve the current state-of-the-art technology.
Assuntos
Prótese Vascular , Células-Tronco/citologia , Animais , Diferenciação Celular , Linhagem Celular , Matriz Extracelular/metabolismo , Alicerces TeciduaisRESUMO
While advances in computational models of mechanical phenomena have made it possible to simulate dynamically complex problems in biomechanics, accurate material models for soft tissues, particularly brain tissue, have proven to be very challenging. Most studies in the literature on material properties of brain tissue are performed in shear loading and very few tackle the behavior of brain in compression. In this study, a viscoelastic constitutive model of bovine brain tissue under finite step-and-hold uniaxial compression with 10 s(-1) ramp rate and 20 s hold time has been developed. The assumption of quasi-linear viscoelasticity (QLV) was validated for strain levels of up to 35%. A generalized Rivlin model was used for the isochoric part of the deformation and it was shown that at least three terms (C(10), C(01) and C(11)) are needed to accurately capture the material behavior. Furthermore, for the volumetric deformation, a two parameter Ogden model was used and the extent of material incompressibility was studied. The hyperelastic material parameters were determined through extracting and fitting to two isochronous curves (0.06 s and 14 s) approximating the instantaneous and steady-state elastic responses. Viscoelastic relaxation was characterized at five decay rates (100, 10, 1, 0.1, 0 s(-1)) and the results in compression and their extrapolation to tension were compared against previous models.
Assuntos
Encéfalo , Elasticidade , Modelos Biológicos , Animais , Bovinos , Análise de Elementos FinitosRESUMO
While it has been shown that repetitive mild brain injuries can cause cumulative damage to the brain, changes to the mechanical properties of brain tissue at large deformations were also noted in the literature. The goal of this study was to show that the viscoelastic properties of brain tissue significantly change after traumatic axonal injury (TAI). An impact acceleration model was used to create TAI in the rat brainstem which was quantified with an immunohistochemistry technique at the ponto-medullary junction (PmJ) and pyramidal decussation (PDx). The viscoelastic properties at these two points with and without preconditioning were characterized using an indentation technique combined with finite element analysis and a comparison was made between injured and uninjured specimens, which revealed statistically significant reduction in the instantaneous elastic force at PDx where the brain tissue sustained a significantly higher level of injury. The result of this study can be used to characterize a damage function for the brain tissue undergoing large deformation.