Polyolefin-Based Smart Self-Healing Composite Coatings Modified with Calcium Carbonate and Sodium Alginate.

Corrosion-related damage incurs significant capital costs in many industries. In this study, an anti-corrosive pigment was synthesized by modifying calcium carbonate with sodium alginate (SA), and smart self-healing coatings were synthesized by reinforcing the anti-corrosive pigments into a polyolefin matrix. Structural changes during the synthesis of the anti-corrosive pigment were examined using scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis. Moreover, thermal gravimetric analysis confirmed the loading of the corrosion inhibitor, and electrochemical impedance spectroscopic analysis revealed a stable impedance value, confirming the improved corrosion resistance of the modified polyolefin coatings. The incorporation of the anticorrosive pigment into a polyolefin matrix resulted in improved pore resistance properties and capacitive behavior, indicating a good barrier property of the modified coatings. The formation of a protective film on the steel substrate reflected the adsorption of the corrosion inhibitor (SA) on the steel substrate, which further contributed to enhancing the corrosion resistance of the modified coatings. Moreover, the formation of the protective film was also analyzed by profilometry and elemental mapping analysis.

The Fabrication of Halogen-Doped FeWO4 Heterostructure Anchored over Graphene Oxide Nanosheets for the Sunlight-Driven Photocatalytic Degradation of Methylene Blue Dye.

Rapid industrialization and urbanization are the two significant issues causing environmental pollution. The polluted water from various industries contains refractory organic materials such as dyes. Heterogeneous photocatalysis using semiconductor metal oxides is an effective remediation technique for wastewater treatment. In this research, we used a co-precipitation-assisted hydrothermal method to synthesize a novel I-FeWO4/GO sunlight-active nanocomposite. Introducing dopant reductive iodine species improved the catalytic activity of FeWO4/GO. I- ions improved the catalytic performance of H2O2 by doping into FeWO4/GO composite. Due to I- doping and the introduction of graphene as a support medium, enhanced charge separation and transfer were observed, which is crucial for efficient heterogeneous surface reactions. Various techniques, like FTIR, SEM-EDX, XRD, and UV-Vis spectroscopy, were used to characterize composites. The Tauc plot method was used to calculate pristine and iodine-doped FeWO4/GO bandgap. Iodine doping reduced the bandgap from 2.8 eV to 2.6 eV. The degradation of methylene blue (MB) was evaluated by optimizing various parameters like catalyst concentration, oxidant dose, pH, and time. The optimum conditions for photocatalysts where maximum degradation occurred were pH = 7 for both FeWO4/GO and I-FeWO4/GO; oxidant dose = 9 mM and 7 mM for FeWO4/GO and I-FeWO4/GO; and catalyst concentration = 30 mg and 35 mg/100 mL for FeWO4/GO and I-FeWO4/GO; the optimum time was 120 min. Under these optimum conditions, FeWO4/GO and I-FeWO4/GO showed 92.0% and 97.0% degradation of MB dye.

Sustainable Solution for Plastic Pollution: Upcycling Waste Polypropylene Masks for Effective Oil-Spill Management.

The use of Polypropylene PP in disposable items such as face masks, gloves, and personal protective equipment has increased exponentially during and after the COVID-19 pandemic, contributing significantly to microplastics and nanoplastics in the environment. Upcycling of waste PP provides a useful alternative to traditional thermal and mechanical recycling techniques. It transforms waste PP into useful products, minimizing its impact on the environment. Herein, we synthesized an oil-sorbent pouch using waste PP, which comprises superposed microporous and fibrous thin films of PP using spin coating. The pouch exhibited super-fast uptake kinetics and reached its saturation in fewer than five minutes with a high oil uptake value of 85 g/g. Moreover, it displayed high reusability and was found to be effective in absorbing oil up to seven times when mechanically squeezed between each cycle, demonstrating robust oil-sorption capabilities. This approach offers a potential solution for managing plastic waste while promoting a circular economy.

Reusable Macroporous Oil Sorbent Films from Plastic Wastes.

Plastic waste comprises 15% of the total municipal solid waste and can be a rich source for producing value-added materials. Among them, polyethylene (PE) and polypropylene (PP) account for 60% of the total plastic waste, mainly due to their low-end and one-time-use applications. Herein, we report reusable oil sorbent films made by upcycling waste PE and PP. The as-prepared oil sorbent had an uptake capacity of 55 g/g. SEM analysis revealed a macroporous structure with a pore size range of 1-10 µm, which facilitates oil sorption. Similarly, the contact angle values reflected the oleophilic nature of the sorbent. Moreover, thermal properties and crystallinity were examined using DSC, while mechanical properties were calculated using tensile testing. Lastly, 95% of the sorbed oil could be easily recovered by squeezing mechanically or manually.

Coal fly ash supported CoFe2O4 nanocomposites: Synergetic Fenton-like and photocatalytic degradation of methylene blue.

Rapid industrialization is causing a serious threat for the environment. Therefore, this research was aimed in developing ceramic cobalt ferrite (CoFe2O4) nanocomposite photocatalyst coated with coal fly ash (CFA-CoFe2O4) using facile hydrothermal synthesis route and their applications against methylene blue. The pristine cobalt ferrite photocatalyst was also prepared, characterized, and applied for efficiency comparison. Prepared photocatalyst were characterized by X-ray diffraction (XRD), fourier transformed infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy with energy dispersive spectroscopy (SEM/EDS). Optical response of catalysts was check using photoluminescence spectroscopy (PL). pH drift method was used for the surface charge characteristics of the material under acidic and basic conditions of solution pH. The photocatalytic degradation potential of all the materials were determined under ultra-violet irradiations. The influencing reaction parameters like pH, catalyst dose, oxidant dose, dye concentration, and irradiation time, were sequentially optimized to obtain best suited conditions. The 99% degradation of 10 ppm methylene blue was achieved within 60 min of reaction time under pH = 5 and 7, catalyst dose = 10 and 12 mg/100 mL, oxidant = 12 mM and 5 mM for cobalt ferrite and CFA-CoFe2O4 photocatalysts, respectively. Afterwards, the radical scavenging experiments were conducted to find out the effective radical scavengers (˙OH, h+, and e-) in photocatalytic degradation process. The kinetic study of the process was done by applying 1st order, 2nd order, and BMG models. Statistical assessment of interaction effect among experimental variables was achieved using response surface methodology (RSM).

Self-Healing Performance of Smart Polymeric Coatings Modified with Tung Oil and Linalyl Acetate.

This work focuses on the synthesis and characterization of polymeric smart self-healing coatings. A comparison of structural, thermal, and self-healing properties of two different polymeric coatings comprising distinct self-healing agents (tung oil and linalyl acetate) is studied to elucidate the role of self-healing agents in corrosion protection. Towards this direction, urea-formaldehyde microcapsules (UFMCs) loaded with tung oil (TMMCs) and linalyl acetate (LMMCs) were synthesized using the in-situ polymerization method. The synthesis of both LMMCs and TMMCs under identical experimental conditions (900 rpm, 55 °C) has resulted in a similar average particle size range (63-125 µm). The polymeric smart self-healing coatings were developed by reinforcing a polymeric matrix separately with a fixed amount of LMMCs (3 wt.% and 5 wt.%), and TMMCs (3 wt.% and 5 wt.%) referred to as LMCOATs and TMCOATs, respectively. The development of smart coatings (LMCOATs and TMCOATs) contributes to achieving decent thermal stability up to 450 °C. Electrochemical impedance spectroscopy (EIS) analysis indicates that the corrosion resistance of smart coatings increases with increasing concentration of the microcapsules (TMMCs, LMMCs) in the epoxy matrix reaching ~1 GΩ. As a comparison, LMCOATs containing 5 wt.% LMMCs demonstrate the best stability in the barrier properties than other developed coatings and can be considered for many potential applications.

Effect of Silicon Nitride and Graphene Nanoplatelets on the Properties of Aluminum Metal Matrix Composites.

This research work aims at investigating the influence of a fixed content of silicon nitride (Si3N4) and varied contents of graphene nanoplatelets (GNPs) on the physical (density, structural, morphological) and mechanical properties (microhardness, nanoindentation) of Al-Si3N4-GNPs composites. The composites were fabricated by a microwave-assisted powder metallurgy route. The Si3N4 concentration was fixed at (5 wt.%) in Al-Si3N4-GNPs composites while the GNPs concentration was varied between (0 wt.%) to (1.5 wt.%) with an increment of (0.5 wt.%). The structural analysis indicates the formation of phase pure materials with high crystallinity. The microstructural analysis confirmed the presence of the Si3N4 and GNPs showing enhanced agglomeration with the increasing amount of GNPs. Moreover, the surface roughness of the synthesized composites increases with an increasing amount of GNPs reaching its maximum value (RMS = 65.32 nm) at 1.5 wt.% of GNPs. The Al-Si3N4-GNPs composites exhibit improved microhardness and promising load-indentation behavior during nanoindentation when compared to pure aluminum (Al). Moreover, Al-Si3N4-GNPs composites demonstrate higher values of compressive yield strength (CYS) and ultimate compressive strength (UCS) when compared to pure Al despite showing a declining trend with an increasing amount of GNPs in the matrix. Finally, a shear mode of fracture is prevalent in Al-Si3N4-GNPs composites under compression loading.

Development and Properties of Polymeric Nanocomposite Coatings.

Polymeric-based nanocomposite coatings were synthesized by reinforcing epoxy matrix with titanium nanotubes (TNTs) loaded with dodecylamine (DOC). The performance of the developed nanocomposite coatings was investigated in corrosive environments to evaluate their anti-corrosion properties. The SEM/TEM, TGA, and FTIR analysis confirm the loading of the DOC into the TNTs. The UV-Vis spectroscopic analysis confirms the self-release of the inhibitor (DOC) in response to the pH change. The electrochemical impedance spectroscopic (EIS) analysis indicates that the synthesized nanocomposite coatings demonstrate superior anticorrosion properties at pH 2 as compared to pH 5. The improved anticorrosion properties of nanocomposite coatings at pH 2 can be attributed to the more effective release of the DOC from the nanocontainers. The superior performance makes polymeric nanocomposite coatings suitable for many industrial applications.

Advances in osteobiologic materials for bone substitutes.

A significant challenge in the current orthopedics is the development of suitable osteobiologic materials that can replace the conventional allografts, autografts, and xenografts and thereby serve as implant materials as bone substitutes for bone repair or remodelling. The complex biology behind the nanostructure and microstructure of bones and their repair mechanisms, which involve various types of chemical and biomechanical signalling amongst different cells, has set strong requirements for biomaterials to be used in bone tissue engineering. This review presents an overview of various types of osteobiologic materials to facilitate the formation of the functional bone tissue and healing of the bone, covering metallic, ceramic, polymeric, and cell-based graft substitutes, as well as some biomolecular strategies including stem cells, extracellular matrices, growth factors, and gene therapies. Advantages and disadvantages of each type, particularly from the perspective of osteoinductive and osteoconductive capabilities, are discussed. Although the numerous challenges of bone regeneration in tissue engineering and regenerative medicine are yet to be entirely addressed, further advancements in osteobiologic materials will pave the way towards engineering fully functional bone replacement grafts.

Using B4C Nanoparticles to Enhance Thermal and Mechanical Response of Aluminum.

In this work, Al-B4C nanocomposites were produced by microwave sintering and followed by hot extrusion processes. The influence of ceramic reinforcement (B4C) nanoparticles on the physical, microstructural, mechanical, and thermal characteristics of the extruded Al-B4C nanocomposites was investigated. It was observed that the density decreased and porosity increased with an increase in B4C content in aluminum matrix. The porosity of the composites increased whereas density decreased with increasing B4C content. Electron microscopy analysis reveals the uniform distribution of B4C nanoparticles in the Al matrix. Mechanical characterization results revealed that hardness, elastic modulus, compression, and tensile strengths increased whereas ductility decreases with increasing B4C content. Al-1.0 vol. % B4C nanocomposite exhibited best hardness (135.56 Hv), Young's modulus (88.63 GPa), and compression/tensile strength (524.67/194.41 MPa) among the materials investigated. Further, coefficient of thermal expansion (CTE) of composites gradually decreased with an increase in B4C content.