Evaporable Fullerene Indanones with Controlled Amorphous Morphology as Electron Transport Layers for Inverted Perovskite Solar Cells.

Fullerenes are among the most commonly used electron-transporting materials (ETMs) in inverted perovskite solar cells (IPSCs). Although versatile functionalized fullerene derivatives have shown excellent performance in IPSCs, pristine [60]fullerene (C60) is still the most widely used in devices mainly because of its uniform morphology by thermal deposition. However, thermally evaporable fullerene derivatives have not yet been achieved. Herein, we developed a series of evaporable fullerene derivatives, referred to as fullerene indanones (FIDOs), affording IPSCs with high power conversion efficiency (PCE) and long-term storage stability. The FIDOs were designed with a unique architecture in which the fullerene moiety and a benzene ring moiety are linked via a five-membered carbon ring in benzene ring plane. This molecular arrangement affords exceptional thermal stability, allowing the FIDOs to withstand harsh thermal deposition conditions. Moreover, by manipulating the steric bulk of the functional groups, we could control the state of the organic film from crystalline to amorphous. Subsequently, we used FIDOs as an electron transport layer (ETL) in IPSCs. Thanks to the suitable energy level and dual-passivation effect of FIDOs compared with a reference ETL using C60, the device using FIDOs achieved an open-circuit voltage of 1.16 V and a fill factor of 0.77. As a result, the PCE reached 22.11%, which is superior to 20.45% of the best-performing reference device. Most importantly, the FIDO-based IPSC devices exhibited exceptional stability in comparison to the reference device due to the stability of the amorphous ETL films.

A secreted salivary effector from Riptortus pedestris impairs soybean defense through modulating phytohormone signaling pathways.

Riptortus pedestris (Fabricius), one of the major piercing-sucking insects in soybeans, causes delayed plant senescence and abnormal pods, known as staygreen syndrome. Recent research has shown that direct feeding of this insect is the major cause of soybean staygreen syndrome. However, it remains unclear whether R. pedestris salivary proteins play vital roles in insect infestation. Here, we found that 4 secretory salivary proteins can induce cell death in Nicotiana benthamiana by transient heterologous expression. The cell death induced by Rp2155 relies on the nucleotide-binding leucine-rich repeat helper, HSP90. Tissue-specificity assays indicated that Rp2155 is specifically expressed in the salivary gland of R. pedestris and is significantly induced during insect feeding. The expression of salicylic acid (SA)-, jasmonic acid (JA)-related genes was increased in soybean when fed by Rp2155-silenced R. pedestris. More importantly, soybean staygreen symptoms caused by R. pedestris were significantly alleviated when Rp2155 was silenced. Together, these results suggest that the salivary effector Rp2155 is involved in promoting insect infestation by suppressing the JA and SA pathways, and it can be considered as a potential RNA interference target for insect control.

A salivary secretory protein from Riptortus pedestris facilitates pest infestation and soybean staygreen syndrome.

The bean bug (Riptortus pedestris), one of the most important pests of soybean, causes staygreen syndrome, delaying plant maturation and affecting pod development, resulting in severe crop yield loss. However, little is known about the underlying mechanism of this pest. In this study, we found that a salivary secretory protein, Rp614, induced cell death in nonhost Nicotiana benthamiana leaves. NbSGT1 and NbNDR1 are involved in Rp614-induced cell death. Tissue specificity analysis showed that Rp614 is mainly present in salivary glands and is highly induced during pest feeding. RNA interference experiments showed that staygreen syndrome caused by R. pedestris was significantly attenuated when Rp614 was silenced. Together, our results indicate that Rp614 plays an essential role in R. pedestris infestation and provide a promising RNA interference target for pest control.

The Characterization of Three Novel Insect-Specific Viruses Discovered in the Bean Bug, Riptortus pedestris.

Insect-specific virus (ISV) is one of the most promising agents for the biological control of insects, which is abundantly distributed in hematophagous insects. However, few ISVs have been reported in Riptortus pedestris (Fabricius), one of the major pests threatening soybeans and causing great losses in yield and quality. In this work, field Riptortus pedestris was collected from six soybean-producing regions in China, and their virome was analyzed with the metatranscriptomic approach. Altogether, seven new insect RNA viruses were identified, three of which had complete RNA-dependent RNA polymerase (RdRp) and nearly full-length genome sequences, which were named Riptortus pedestris alphadrosrha-like virus 1 (RpALv1), Riptortus pedestris alphadrosrha-like virus 2 (RpALv2) and Riptortus pedestris almendra-like virus (RiALv). The three identified novel ISVs belonged to the family Rhabdoviridae, and phylogenetic tree analysis indicated that they were clustered into new distinct clades. Interestingly, the analysis of virus-derived small-interfering RNAs (vsiRNAs) indicated that only RiALv-derived siRNAs exhibited 22 nt length preference, whereas no clear 21 or 22 nt peaks were observed for RpALv1 and RpALv2, suggesting the complexity of siRNA-based antiviral immunity in R. pedestris. In conclusion, this study contributes to a better understanding of the microenvironment in R. pedestris and provides viral information for the development of potential soybean insect-specific biocontrol agents.

The C-Terminal Transmembrane Domain of Cowpea Mild Mottle Virus TGBp2 Is Critical for Plasmodesmata Localization and for Its Interaction With TGBp1 and TGBp3.

The movement of some plant RNA viruses is mediated by triple gene block (TGB) proteins, which cooperate to transfer the viral genome from cell to cell through plasmodesmata. Here, we investigated the function of the TGB proteins of cowpea mild mottle virus (CPMMV; genus Carlavirus, family Betaflexiviridae), which causes severe damage to soybean production. Subcellular localization experiments demonstrated that TGBp1 and TGBp3 were localized to the endoplasmic reticulum (ER), plasmodesmata (PD) and nucleus in Nicotiana benthamiana leaves. TGBp2 was unusually localized to PD. In protein interaction assays TGBp2 significantly enhanced the interaction between TGBp3 and TGBp1. Interaction assays using deletion mutants showed that the C-terminal transmembrane (TM) domain of TGBp2 is critical for its localization to PD and for its interaction with TGBp1 and TGBp3.

High-Efficiency ITO-Free Organic Photovoltaics with Superior Flexibility and Upscalability.

Developing indium-tin-oxide (ITO)-free flexible organic photovoltaics (OPVs) with upscaling capacity is of great significance for practical applications of OPVs. Unfortunately, the efficiencies of the corresponding devices lag far behind those of ITO-based rigid small-area counterparts. To address this issue, an advanced device configuration is designed and fabricated featuring a top-illuminated structure with ultrathin Ag as the transparent electrode. First, a conjugated polyelectrolyte layer, i.e., PCP-Li, is inserted to effectively connect the bottom Ag anode and the hole transport layer, achieving good photon to electron conversion. Second, charge collecting grids are deposited to suppress the increased resistance loss with the upscaling of the device area, realizing almost full retention of device efficiency from 0.06 to 1 cm2 . Third, the designed device delivers the best efficiency of 15.56% with the area of 1 cm2 on polyimide substrate, representing as the record among the ITO-free, large-area, flexible OPVs. Interestingly, the device exhibits no degradation after 100 000 bending cycles with a radius of 4 mm, which is the best result for flexible OPVs. This work provides insight into device structure design and optimization for OPVs with high efficiency, low cost, superior flexibility, and upscaling capacity, indicating the potential for the future commercialization of OPVs.

Polymer Modification on the NiOx Hole Transport Layer Boosts Open-Circuit Voltage to 1.19 V for Perovskite Solar Cells.

Inverted-structure perovskite solar cells (PVSCs) applying NiOx as the hole transport layer (HTL) have attracted increasing attention. It is still a challenge to optimize the contact between NiOx and the perovskite layer and to suppress energy loss at the interface. In this study, interface engineering was carried out by modifying the NiOx layer with different polymers such as polystyrene, poly(methyl methacrylate) (PMMA), or poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine] (PTAA) to improve the surface contact between NiOx and the perovskite, to decrease the defect states, and to make the energy level alignment better. The NiOx/PMMA-based device presents a Voc as high as 1.19 V because of the improved interfacial contact and the interaction of the carbonyl and methoxy group with Pb2+. The NiOx/PTAA-based device with the structure ITO/NiOx/PTAA/(MAPbI3)0.95(MAPbBr2Cl)0.05/PCBM/BCP/Ag exhibits the highest power conversion efficiency of 21.56% with a high Voc of 1.19 V. The enhanced performance can be attributed to the deepened highest occupied molecular orbital level of NiOx/PTAA, which matched well with that of the perovskite and suppressed interface energy loss as well. This work provides a facile approach for efficiently improving the Voc of NiOx-based PVSCs.