Recent advancements in wastewater treatment via anaerobic fermentation process: A systematic review.

This manuscript delves into the realm of wastewater treatment, with a particular emphasis on anaerobic fermentation processes, especially dark, photo, and dark-photo fermentation processes, which have not been covered and overviewed previously in the literature regarding the treatment of wastewater. Moreover, the study conducts a bibliometric analysis for the first time to elucidate the research landscape of anaerobic fermentation utilization in wastewater purification. Furthermore, microorganisms, ranging from microalgae to bacteria and fungi, emphasizing the integration of these agents for enhanced efficiency, are all discussed and compared. Various bioreactors, such as dark and photo fermentation bioreactors, including tubular photo bioreactors, are scrutinized for their design and operational intricacies. The results illustrated that using clostridium pasteurianum CH4 and Rhodopseudomonas palustris WP3-5 in a combined dark-photo fermentation process can treat wastewater to a pH of nearly 7 with over 90% COD removal. Also, integrating Chlorella sp and Activated sludge can potentially treat synthetic wastewater to COD, P, and N percentage removal rates of 99%,86%, and 79%, respectively. Finally, the paper extends to discuss the limitations and future prospects of dark-photo fermentation processes, offering insights into the road ahead for researchers and scientists.

Numerical simulation based performance enhancement approach for an inorganic BaZrS3/CuO heterojunction solar cell.

One of the main components of the worldwide transition to sustainable energy is solar cells, usually referred to as photovoltaics. By converting sunlight into power, they lessen their reliance on fossil fuels and the release of greenhouse gases. Because solar cells are decentralized, distributed energy systems may be developed, which increases the efficiency of the cells. Chalcogenide perovskites have drawn interest due to their potential in solar energy conversion since they provide distinctive optoelectronic characteristics and stability. But high temperatures and lengthy reaction periods make it difficult to synthesise and process them. Therefore, we present the inaugural numerical simulation using SCAPS-1D for emerging inorganic BaZrS3/CuO heterojunction solar cells. This study delves into the behaviour of diverse parameters in photovoltaic devices, encompassing efficiency (η) values, short-circuit current density (Jsc), fill factor (FF), and open-circuit voltage (Voc). Additionally, we thoroughly examine the impact of window and absorber layer thickness, carrier concentration, and bandgap on the fundamental characteristics of solar cells. Our findings showcase the attainment of the highest efficiency (η) values, reaching 27.3% for our modelled devices, accompanied by Jsc values of 40.5 mA/cm2, Voc value of 0.79 V, and FF value of 85.2. The efficiency (η) values are chiefly influenced by the combined effects of Voc, Jsc, and FF values. This optimal efficiency was achieved with CuO thickness, band gap, and carrier concentration set at 5 µm, 1.05 eV, and above 1019 cm-3, respectively. In comparison, the optimal parameters for BaZrS3 include a thickness of 1 µm, a carrier concentration below 1020 cm-3, and a band gap less than 1.6 eV. Therefore, in the near future, the present simulation will simultaneously provide up an entirely novel field for the less defective perovskite solar cell.

A Review on CNTs-Based Electrochemical Sensors and Biosensors: Unique Properties and Potential Applications.

Carbon nanotubes (CNTs), are safe, biocompatible, bioactive, and biodegradable materials, and have sparked a lot of attention due to their unique characteristics in a variety of applications, including medical and dye industries, paper manufacturing and water purification. CNTs also have a strong film-forming potential, permitting them to be widely employed in constructing sensors and biosensors. This review concentrates on the application of CNT-based nanocomposites in the production of electrochemical sensors and biosensors. It emphasizes the synthesis and optimization of CNT-based sensors for a range of applications and outlines the benefits of using CNTs for biomolecule immobilization. In addition, the use of molecularly imprinted polymer (MIP)-CNTs in the production of electrochemical sensors is also discussed. The challenges faced by the current CNTs-based sensors, along with some the future perspectives and their future opportunities, are also briefly explained in this paper.

RESEARCH HIGHLIGHTSReview article on advanced Carbon-Nanotube (CNT)-based sensors and biosensors.The advantages of using CNTs for biomolecule immobilization and in electrochemical sensors and biosensors are discussed.The use of molecularly imprinted polymer-CNT nanocomposites in the production of electrochemical sensors is also discussed.Several characteristics, including sensor manufacturing, linear ranges, detection limits, and repeatability, are described in depth.Challenges and prospects using CNTs modified sensors have been proposed.

Secondary transmission of SARS-CoV-2 through wastewater: Concerns and tactics for treatment to effectively control the pandemic.

The SARS-CoV-2 virus has spread globally and has severely impacted public health and the economy. Hand hygiene, social distancing, and the usage of personal protective equipment are considered the most vital tools in controlling the primary transmission of the virus. Converging evidence indicated the presence of SARS-CoV-2 in wastewater and its persistence over several days, which may create secondary transmission of the virus via waterborne and wastewater pathways. Although, researchers have started focusing on this mode of virus transmission, limited knowledge and societal unawareness of the transmission through wastewater may lead to significant increases in the number of positive cases. To emphasize the severe issue of virus transmission through wastewater and create societal awareness, we present a state of the art critical review on transmission of SARS-CoV-2 in wastewater and the potential remedial strategies to effectively control the viral spread and safeguard society. For low-income countries with high population densities, it is suggested to identify the virus in large scale municipal wastewater plants before following up with one-to-one testing for effective control of the secondary transmission. Ultrafiltration is an effective method for wastewater treatment and usually more than 4 logs of virus removal are achieved while safeguarding good protein permeability. Decentralized wastewater treatment facilities using solar-assisted disinfestation methods are most economical and can be effectively used in hospitals, isolation wards, and medical centers for reducing the risk of transmission from high local concentration sites, especially in tropical countries with abundant solar energy. Disinfection with chlorine, sodium hypochlorite, benzalkonium chloride, and peracetic acid have shown potential in terms of virucidal properties. Biological wastewater treatment using micro-algae will be highly effective in removal of virus and can be incorporated into membrane bio-reaction to achieve excellent virus removal rate. Though promising results have been shown by initial research for inactivation of SARS-CoV-2 in wastewater using physical, chemical and biological based treatment methods, there is a pressing need for extensive investigation of COVID-19 specific disinfectants with appropriate concentrations, their environmental implications, and regular monitoring of transmission. Effective wastewater treatment methods with high virus removal capacity and low treatment costs should be selected to control the virus spread and safeguard society from this deadly virus.