Nitrogen-doped activated carbon-based steel slag composite material as an accelerant for enhancing the resilience of flexible biogas production process against shock loads: Performance, mechanism and modified ADM1 modeling.

Anaerobic digestion for flexible biogas production can lead to digestion inhibition under high shock loads. While steel slag addition has shown promise in enhancing system buffering, its limitations necessitate innovation. This study synthesized the nitrogen-doped activated carbon composite from steel slag to mitigate intermediate product accumulation during flexible biogas production. Material characterization preceded experiments introducing the composite into anaerobic digestion systems, evaluating its impact on methane production efficiency under hydraulic and concentration sudden shocks. Mechanistic insights were derived from microbial community and metagenomic analyses, facilitating the construction of the modified Anaerobic Digestion Model No. 1 (ADM1) to quantitatively assess the material's effects. Results indicate superior resistance to concentration shocks with substantial increment of methane production rate up to 33.45% compared with control group, which is mediated by direct interspecies electron transfer, though diminishing with increasing shock intensity. This study contributes theoretical foundations for stable flexible biogas production and offers an effective predictive tool for conductor material reinforcement processes.

Evaluating the sustainability of demand oriented biogas supply programs under different flexible hierarchies: A suggested approach based on the triple bottom line principle.

In this paper, a decision-making approach based on the triple bottom line concept is presented for evaluating the sustainability of demand-oriented biogas supply (DOBS) programs with regard to their environmental, economic, and social impacts. For the assessment, an indicator system was developed, whose main parameters were quantified by integrating emergy analysis, economic benefit assessment, and a proposed social risk accounting method. The Charnes-Cooper-Wei-Huang (CCWH) model with constrained cone was adopted to calculate the comprehensive sustainability via the synthesis of the economic, environmental, and social indicators, in which eight scenarios were set according to the flexibility hierarchy of biogas supplied for load demand, biogas production mode, and feeding substrates. The evaluation results show that the DOBS scenario of supplying for real-time varying power demand by using straw and livestock manure has the highest sustainability score in our case study. Based on the results, corresponding managerial implications are proposed.

The release inhibition of organic substances from microplastics in the presence of algal derived organic matters: Influence of the molecular weight-dependent inhibition heterogeneities.

As the emerging contaminants, the behavior and fate of microplastics (MPs) were highly related to the interactions with surrounding organic matters. However, information on the effects of molecular sizes of organic matters on the interaction is still lacking. In this study, the bulk algal-derived organic matter (AOM) samples were obtained and further fractionated into high molecular weight (HMW-, 1kDa-0.45 µm) and low molecular weight (LMW-, < 1 kDa) fractions. The interaction between MPs [polyethylene (PE) and polystyrene (PS)] and these MW-fractionated AOMs were characterized by dissolved organic carbon, fluorescence and absorbance spectroscopy, and fourier transform infrared (FTIR) analysis. Results showed that presence of AOM could effectively inhibit the release of additives from MPs. Further analysis found that the inhibition extents decreased in the order of HMW- > bulk > LMW-AOM. The absorbance and fluorescence spectroscopy showed that aromatic protein-like substances in HMW fraction exhibited higher adsorption affinity to MPs than the bulk and LMW counterparts. The strong sorption of aromatic substances may offer more binding sites for additives to inhibit the release of organic substances. Moreover, two dimensional FTIR correlation spectroscopy revealed that the HMW non-aromatic substances were preferentially adsorbed onto PS, which led to an enhanced adsorption capacity to additives by forming H-bonding. Therefore, the MW- and component-dependent heterogeneities of AOM samples must be fully considered in evaluating the environmental behavior of MPs.

Characteristics of fly ash from the dry flue gas desulfurization system for iron ore sintering plants.

The characteristics of fly ash from the flue gas desulfurization (FGD) system are important for its reuse and are mainly depend on the desulfurization process. The physical and chemical properties of DSF ash, which refers to fly ash from the dry FGD system for the iron ore sintering process, were investigated. Its mineralogical contents were determined by X-ray diffraction and thermogravimetry analysis, and its micro-morphology was studied by scanning electric micrograph analysis. The results show that DSF ash has a higher CaO and SO3 content, and the main sulfur form is sulfite, with only a part of it oxidized to sulfate. The major minerals present in DSF ash are hannebachite, anhydrite, calcite and portlandite; a minor constituent is calcium chloride. The particles of DSF ash are irregular, fragmentary and small, and hannebachite grows on their surfaces. Particle size is affected by the FGD process, and the ash size from the maximized emission reduction of the sintering-FGD process is lower than that from the circulating fluidized bed-FGD process. The particle size distribution of DSF ash follows the Rosin--Rammler-Bennet equation.