Perceived Workload Using Separate (Filtering Facepiece Respirator and Face Shield) and Powered Air-Purifying Respirator and Integrated Lightweight Protective Air-Purifying Respirator: Protocol for an International Multisite Human Factors Randomized Crossover Feasibility Study.

BACKGROUND: The design of personal protective equipment (PPE) may affect well-being and clinical work. PPE as an integrated item may improve usability and increase adherence by healthcare professionals. Human factors design and safety may reduce occupational-acquired diseases. As an integrated PPE, a lightweight protective air-purifying respirator (L-PAPR) could be used during health procedures where healthcare professionals are exposed to airborne pathogens. The human factors affecting the implementation of alternative PPE such as L-PAPR have not been thoroughly studied. The population of interest is health care professionals, the intervention is the performance by PPE during tasks across the three PPE types 1.) N95 respirators and face shields, 2.)traditional powered air-purifying respirator(PAPR), and 3.) L-PAPR. The outcomes are user error, communications, safety, and end-user preferences. OBJECTIVE: This study will assess whether the L-PAPR improves health care professionals' comfort in terms of perceived workload and physical and psychological burden during direct patient care when compared with the traditional PAPR or N95 and face shield. This study also aims to evaluate human factors during the comparison of the use of L-PAPR with a combination of N95 respirators plus face shields or the traditional PAPRs. METHODS: This is an interventional randomized crossover quality improvement feasibility study consisting of a 3-site simulation phase with 10 participants per site and subsequent field testing in 2 sites with 30 participants at each site. The 3 types of respiratory PPE will be compared across medical tasks and while donning and doffing. We will evaluate the user's perceived workload, usability, usage errors, and heart rate. We will conduct semistructured interviews to identify barriers and enablers to implementation across each PPE type over a single continuous wear episode and observe interpersonal communications across conditions and PPE types. RESULTS: We expect the research may highlight communication challenges and differences in usability and convenience across PPE types along with error frequency during PPE use across PPE types, tasks, and time. CONCLUSIONS: The design of PPE may affect overall well-being and hinder or facilitate clinical work. Combining 2 pieces of PPE into a single integrated item may improve usability and reduce occupational-acquired diseases. The human factors affecting the implementation of an alternative PPE such as L-PAPR or PAPR have not been thoroughly studied. INTERNATIONAL REGISTERED REPORT IDENTIFIER (IRRID): PRR1-10.2196/36549.

Aerial additive manufacturing with multiple autonomous robots.

Additive manufacturing methods1-4 using static and mobile robots are being developed for both on-site construction5-8 and off-site prefabrication9,10. Here we introduce a method of additive manufacturing, referred to as aerial additive manufacturing (Aerial-AM), that utilizes a team of aerial robots inspired by natural builders11 such as wasps who use collective building methods12,13. We present a scalable multi-robot three-dimensional (3D) printing and path-planning framework that enables robot tasks and population size to be adapted to variations in print geometry throughout a building mission. The multi-robot manufacturing framework allows for autonomous three-dimensional printing under human supervision, real-time assessment of printed geometry and robot behavioural adaptation. To validate autonomous Aerial-AM based on the framework, we develop BuilDrones for depositing materials during flight and ScanDrones for measuring the print quality, and integrate a generic real-time model-predictive-control scheme with the Aerial-AM robots. In addition, we integrate a dynamically self-aligning delta manipulator with the BuilDrone to further improve the manufacturing accuracy to five millimetres for printing geometry with precise trajectory requirements, and develop four cementitious-polymeric composite mixtures suitable for continuous material deposition. We demonstrate proof-of-concept prints including a cylinder 2.05 metres high consisting of 72 layers of a rapid-curing insulation foam material and a cylinder 0.18 metres high consisting of 28 layers of structural pseudoplastic cementitious material, a light-trail virtual print of a dome-like geometry, and multi-robot simulations. Aerial-AM allows manufacturing in-flight and offers future possibilities for building in unbounded, at-height or hard-to-access locations.

Academic, clinical and personal experiences of undergraduate healthcare students during the COVID-19 pandemic: A prospective cohort study.

BACKGROUND: Coronavirus disease 2019 has impacted upon the role and safety of healthcare workers, with the potential to have a lasting effect on their wellbeing. Limited research has been conducted during previous pandemics exploring how student healthcare workers are impacted as they study and train for their professional careers. OBJECTIVE: The aim of the current study was to examine the specific impact of COVID-19 on the academic, clinical and personal experiences of healthcare students. METHOD: Undergraduate students across three year groups within the School of Health Sciences at Ulster University completed online Qualtrics surveys at three timepoints during one academic year (2020/2021). Quantitative survey data was downloaded from Qualtrics into SPSS Version 25 for descriptive analysis of each cross-sectional sample. Qualitative survey data was downloaded into text format, which was thematically analysed using content analysis. RESULTS: 412 students completed the survey at Time 1 (October 2020), n = 309 at Time 2 (December 2020) and n = 259 at Time 3 (April 2021). Academically, the pandemic had mostly a negative impact on the learning environment, the development of practical skills, the assessment process and opportunities for peer learning and support. Students reported increased stress and challenges managing their workload and maintaining a sense of motivation and routine. Clinically, they felt unprepared by the university for placement where the pandemic had an increasingly negative impact over time on learning and skill development. In terms of personal experiences, despite the majority of students taking steps to keep physically and mentally well, negative impacts on friendships, mental wellbeing and concerns for family were reported. The pandemic had not impacted upon career choice for most students. CONCLUSION: Consideration must be given to the development of practical skills so students feel prepared for their professional careers given the practical nature of their roles. Programme coordinators should adopt a holistic approach to student wellbeing.

Perinatal complications and maximising lamb survival in an adolescent paradigm characterised by premature delivery and low birthweight.

The competition for nutrients in overnourished and still-growing adolescent sheep negatively impacts gestation length, colostrum supply and lamb birthweight, all of which may affect neonatal morbidity and survival to weaning. Herein perinatal complications and the requirement for supplementary feeding were analysed in relation to gestational-intake, and the degree of premature delivery and prenatal growth-restriction exhibited. Pregnancies were established by embryo transfer and the mean/standard deviation (SD) gestation length and birthweight of the optimally-fed control group (n = 100) was used to define early delivery and reduced birthweight categories (1.5 and 3.0 SDs below the control mean for each aspect). Control lambs were largely delivered at term (94%), and had a normal birthweight (92%), while very preterm (≤139days, 18.5%) and preterm delivery (140-142days, 54.8%), extremely low birthweight (ELBW; females ≤2838g and males ≤3216g, 21.1%) and low birthweight (LBW; females 2839 to ≤4001g and males 3217 to ≤4372g, 32.2%), were common in the overnourished group (n = 270, P<0.001). Accordingly, overnourished dams were more likely to lamb without assistance while the incidence of major dystocia was greater in controls. Initial lamb vigour at birth was independent of gestational-intake, delivery or birthweight category but both ELBW and very premature lambs required more assistance with feeding in the first 24h postnatal, primarily reflecting low colostrum availability. Indeed, relative to normal, ELBW lambs had a greater risk of experiencing mismothering, and enhanced likelihood of requiring supplementary feeding throughout the neonatal period (P<0.001). ELBW lambs also had a greater possibility of respiratory issues at birth (P<0.01) and renal complications (P<0.001), while very preterm delivery was associated with an increased risk of gastrointestinal tract problems (P<0.01). In spite of these complications, all-cause mortality was low (5.4%) suggesting that our proactive neonatal care regime can overcome many of the issues associated with extreme prematurity and low birthweight.

A pilot study of patient reported outcomes evaluating treatment related symptoms and quality of life for men receiving high dose rate brachytherapy combined with hypo-fractionated radiotherapy or hypo-fractionated radiotherapy alone for the treatment of localised prostate cancer.

Patient Reported Outcome Measures (PROMS) are useful metrics in evidence-based clinical care and translational research. Recording treatment-related symptoms and Quality of Life (QoL) can provide information in counselling patients to aid decision-making. This prospective study tested the feasibility of radiographer-led collection of multiple validated PROMS from Prostate Cancer (PCa) patients comparing High Dose Rate Brachytherapy combined with hypo-fractionated external beam radiotherapy (hEBRT) and hEBRT alone. From June to August 2017, 20 men with localised PCa (T1-T3aN0M0) consented to participate in the study. Ten patients received combination treatment (37.5 Gray/15 fractions followed by a 15 Gray implant), and ten patients received monotherapy (60 Gray/20 fractions). PROMS were collected at four time-points (1) at baseline, (2) final fraction of hEBRT, (3) 8 weeks after commencing radiotherapy and (4) 12 weeks after commencing radiotherapy. The PROMS used were EPIC-26, IPSS, IIEFF-5 and SF-12. The difference between the two groups were tested using Mann-Whitney U test and Wilcoxon Signed-Rank Test. All participants completed all PROMS (100% response-rate). The Monotherapy group reported a higher incidence of bowel symptoms compared to the combination group and at Week 12, EPIC-26 bowel summary score demonstrated a statistically significant difference (p = 0.005). The prevalence of erectile dysfunction increased within both groups. Maintenance of QoL was reported throughout treatment. This small study demonstrated feasibility of radiographer-led PROMS collection by 100% completion rate. Streamlining of these tools into integrated technology applications and real time PROMS measurement has the ability to benefit patients and guide clinicians in adapting therapies based on individual need.

Range shifts or extinction? Ancient DNA and distribution modelling reveal past and future responses to climate warming in cold-adapted birds.

Global warming is predicted to cause substantial habitat rearrangements, with the most severe effects expected to occur in high-latitude biomes. However, one major uncertainty is whether species will be able to shift their ranges to keep pace with climate-driven environmental changes. Many recent studies on mammals have shown that past range contractions have been associated with local extinctions rather than survival by habitat tracking. Here, we have used an interdisciplinary approach that combines ancient DNA techniques, coalescent simulations and species distribution modelling, to investigate how two common cold-adapted bird species, willow and rock ptarmigan (Lagopus lagopus and Lagopus muta), respond to long-term climate warming. Contrary to previous findings in mammals, we demonstrate a genetic continuity in Europe over the last 20 millennia. Results from back-casted species distribution models suggest that this continuity may have been facilitated by uninterrupted habitat availability and potentially also the greater dispersal ability of birds. However, our predictions show that in the near future, some isolated regions will have little suitable habitat left, implying a future decrease in local populations at a scale unprecedented since the last glacial maximum.

Measurements of in-use emissions from modern vehicles using an on-board measurement system.

Emissions from "low emitting" modern vehicles were measured on-road using a Fourier transform infrared (FTIR) on-board emissions measurement system. Twenty vehicles were tested on road and on a chassis dynamometer. A subset of four vehicles was tested on a test track as well as on the dynamometer. Comparison of on-board measurements with laboratory measurements while operating on the dynamometer showed agreement within measurement and test to test variability. Comparison of dynamometer measurements with test track measurements showed some larger differences attributable to track test conditions. On-road and dynamometer tests were conducted on the remaining 16 vehicles, with the on-road testing including freeway, arterial, and residential streets. The on-road testing showed that most of the low emitting vehicles under most operating conditions are operating below certification levels. Most vehicles reached a hot stabilized condition within 60 to 100 s. Hot running emissions were on average very low once the catalyst lights off. For NMHC, the majority of the "certification" emissions occur during the start-up, especially for PZEVs. NOx and CO also showed a high fraction of "certification" emissions during start-up, but also showed emission spikes under hot running conditions, especially during transients.