RESUMO
The combination of atomically precise nanoclusters (APNCs) and reticular frameworks is promising for generating component-specific nanocomposites with emergent properties. However, traditional liquid-phase synthesis often hampers this potential by damaging APNCs and limiting combination diversity. Here, mechanochemical synthesis to explore the encapsulation of diverse oil- and water-soluble APNCs within various reticular frameworks is employed, establishing a database of 21 unique APNC-framework combinations, including metal-organic frameworks (MOFs), covalent-organic frameworks (COFs), hydrogen-bonded organic frameworks (HOFs), and multivariate MOFs. These framework coatings not only spatially immobilize APNCs but also secure their structures, preventing aggregation and degradation while enhancing stability and activity. Encapsulating Au25 in HOFs resulted in a remarkable 315-fold increase in catalytic activity compared to Au25 homogeneous catalyst, highlighting the framework's crucial role in catalytic enhancement. The mechanochemical synthesis strategy facilitates tailored support screening, catering to specific needs, and shows promise for developing multifunctional systems, including enzyme-APNC@frameworks material for cascade reactions.
RESUMO
Moiré superlattices, composed of two layers of transition metal dichalcogenides with a relative twist angle, provide a novel platform for exploring the correlated electronic phases and excitonic physics. Here, a gas-flow perturbation chemical vapor deposition (CVD) approach is demonstrated to directly grow MoS2 bilayer with versatile twist angles. It is found that the formation of twisted bilayer MoS2 homostructures sensitively depends on the gas-flow perturbation modes, correspondingly featuring the nucleation sites of the second layer at the same (homo-site) as or at the different (hetero-site) from that of the first layer. The commensurate twist angle of ≈22° in homo-site nucleation strategy accounts for ≈16% among the broad range of twist angles due to its low formation energy, which is in consistence with the theoretical calculation. More importantly, moiré interlayer excitons with the enhanced photoluminescence (PL) intensity and the prolonged lifetime are evidenced in the twisted bilayer MoS2 with a commensurate angle of 22°, which is owing to the reason that the strong moiré potential facilitates the interlayer excitons to be trapped in the moiré superlattices. The work provides a feasible route to controllably built twisted MoS2 homostructures with strong moiré potential to investigate the correlated physics in twistronics systems.
RESUMO
Double-layer quantum systems are promising platforms for realizing novel quantum phases. Here, we report a study of quantum oscillations (QOs) in a weakly coupled double-layer system composed of a large-angle twisted-double-bilayer graphene (TDBG). We quantify the interlayer coupling strength by measuring the interlayer capacitance from the QOs pattern at low temperatures, revealing electron-hole asymmetry. At high temperatures when SdHOs are thermally smeared, we observe resistance peaks when Landau levels (LLs) from two moiré minivalleys are aligned, regardless of carrier density; eventually, it results in a 2-fold increase of oscillating frequency in D, serving as compelling evidence of the magneto-intersub-band oscillations (MISOs) in double-layer systems. The temperature dependence of MISOs suggests that electron-electron interactions play a crucial role and the scattering times obtained from MISO thermal damping are correlated with the interlayer coupling strength. Our study reveals intriguing interplays among Landau quantization, moiré band structure, and scatterings.
RESUMO
Stark effect, the electric-field analogue of magnetic Zeeman effect, is one of the celebrated phenomena in modern physics and appealing for emergent applications in electronics, optoelectronics, as well as quantum technologies. While in condensed matter it has prospered only for excitons, whether other collective excitations can display Stark effect remains elusive. Here, we report the observation of phonon Stark effect in a two-dimensional quantum system of bilayer 2H-MoS2. The longitudinal acoustic phonon red-shifts linearly with applied electric fields and can be tuned over ~1 THz, evidencing giant Stark effect of phonons. Together with many-body ab initio calculations, we uncover that the observed phonon Stark effect originates fundamentally from the strong coupling between phonons and interlayer excitons (IXs). In addition, IX-mediated electro-phonon intensity modulation up to ~1200% is discovered for infrared-active phonon A2u. Our results unveil the exotic phonon Stark effect and effective phonon engineering by IX-mediated mechanism, promising for a plethora of exciting many-body physics and potential technological innovations.
RESUMO
Stacking order plays a crucial role in determining the crystal symmetry and has significant impacts on electronic, optical, magnetic, and topological properties. Electron-phonon coupling, which is central to a wide range of intriguing quantum phenomena, is expected to be intricately connected with stacking order. Understanding the stacking order-dependent electron-phonon coupling is essential for understanding peculiar physical phenomena associated with electron-phonon coupling, such as superconductivity and charge density waves. In this study, we investigate the effect of stacking order on electron-infrared phonon coupling in graphene trilayers. By using gate-tunable Raman spectroscopy and excitation frequency-dependent near-field infrared nanoscopy, we show that rhombohedral ABC-stacked trilayer graphene has a significant electron-infrared phonon coupling strength. Our findings provide novel insights into the superconductivity and other fundamental physical properties of rhombohedral ABC-stacked trilayer graphene, and can enable nondestructive and high-throughput imaging of trilayer graphene stacking order using Raman scattering.
RESUMO
Monolayer molybdenum disulfide (MoS2), an emergent two-dimensional (2D) semiconductor, holds great promise for transcending the fundamental limits of silicon electronics and continue the downscaling of field-effect transistors. To realize its full potential and high-end applications, controlled synthesis of wafer-scale monolayer MoS2 single crystals on general commercial substrates is highly desired yet challenging. Here, we demonstrate the successful epitaxial growth of 2-inch single-crystal MoS2 monolayers on industry-compatible substrates of c-plane sapphire by engineering the formation of a specific interfacial reconstructed layer through the S/MoO3 precursor ratio control. The unidirectional alignment and seamless stitching of MoS2 domains across the entire wafer are demonstrated through cross-dimensional characterizations ranging from atomic- to centimeter-scale. The epitaxial monolayer MoS2 single crystal shows good wafer-scale uniformity and state-of-the-art quality, as evidenced from the ~100% phonon circular dichroism, exciton valley polarization of ~70%, room-temperature mobility of ~140 cm2v-1s-1, and on/off ratio of ~109. Our work provides a simple strategy to produce wafer-scale single-crystal 2D semiconductors on commercial insulator substrates, paving the way towards the further extension of Moore's law and industrial applications of 2D electronic circuits.
RESUMO
Two-dimensional (2D) semiconductors offer great potential as high-performance materials for thin film transistors (TFTs) in displays. Their thin, stable, and flexible nature, along with excellent electrical properties, makes them suitable for flexible displays. However, previous demonstrations lacked clear superiority in pixel resolution and TFT performance. Here we present the flexible 2T1C pixel driving circuit for active-matrix displays based on high-quality large-scale monolayer MoS2. A gate-first fabrication process was developed for flexible MoS2-TFTs, showing a remarkable carrier mobility (average at 52.8 cm2 V-1 s-1), high on/off ratio (average at 1.5 × 108), and negligible hysteresis. The driving current can be modulated by pulsed input voltages and demonstrates a stable and prompt response to both frequency and amplitude. We also demonstrated a 10 × 10 active-matrix with high resolution of 508 pixels per inch, exhibiting 100% yield and high uniformity. The driving circuit works well under bending up to â¼0.91% strain, highlighting its normal functions in flexible displays.
RESUMO
Monolayer molybdenum disulfide (ML-MoS2) is an emergent two-dimensional (2D) semiconductor holding potential for flexible integrated circuits (ICs). The most important demands for the application of such ML-MoS2 ICs are low power consumption and high performance. However, these are currently challenging to satisfy due to limitations in the material quality and device fabrication technology. In this work, we develop an ultra-thin high-κ dielectric/metal gate fabrication technique for the realization of thin film transistors based on high-quality wafer scale ML-MoS2 on both rigid and flexible substrates. The rigid devices can be operated in the deep-subthreshold regime with low power consumption and show negligible hysteresis, sharp subthreshold slope, high current density, and ultra-low leakage currents. Moreover, we realize fully functional large-scale flexible ICs operating at voltages below 1 V. Our process could represent a key step towards using energy-efficient flexible ML-MoS2 ICs in portable, wearable, and implantable electronics.
RESUMO
We report an observation of quantum oscillations (QOs) in the correlated insulators with valley anisotropy of twisted double bilayer graphene (TDBG). The anomalous QOs are best captured in the magneto resistivity oscillations of the insulators at v = -2, with a period of 1/B and an oscillation amplitude as high as 150 kΩ. The QOs can survive up to â¼10 K, and above 12 K, the insulating behaviors are dominant. The QOs of the insulator are strongly D dependent: the carrier density extracted from the 1/B periodicity decreases almost linearly with D from -0.7 to -1.1 V/nm, suggesting a reduced Fermi surface; the effective mass from Lifshitz-Kosevich analysis depends nonlinearly on D, reaching a minimal value of 0.1 me at D = â¼ -1.0 V/nm. Similar observations of QOs are also found at v = 2, as well as in other devices without graphite gate. We interpret the D sensitive QOs of the correlated insulators in the picture of band inversion. By reconstructing an inverted band model with the measured effective mass and Fermi surface, the density of state at the gap, calculated from thermal broadened Landau levels, agrees qualitatively with the observed QOs in the insulators. While more theoretical understandings are needed in the future to fully account for the anomalous QOs in this moiré system, our study suggests that TDBG is an excellent platform to discover exotic phases where correlation and topology are at play.
Assuntos
Excipientes , Grafite , Humanos , Anisotropia , Inversão Cromossômica , Meio AmbienteRESUMO
Two-dimensional (2D) semiconductors such as monolayer molybdenum disulfide (MoS2) are promising building blocks for ultrascaled field effect transistors (FETs), benefiting from their atomic thickness, dangling-bond-free flat surface, and excellent gate controllability. However, despite great prospects, the fabrication of 2D ultrashort channel FETs with high performance and uniformity remains a challenge. Here, we report a self-encapsulated heterostructure undercut technique for the fabrication of sub-10 nm channel length MoS2 FETs. The fabricated 9 nm channel MoS2 FETs exhibit superior performances compared with sub-15 nm channel length including the competitive on-state current density of 734/433 µA/µm at VDS = 2/1 V, record-low DIBL of â¼50 mV/V, and superior on/off ratio of 3 × 107 and low subthreshold swing of â¼100 mV/dec. Furthermore, the ultrashort channel MoS2 FETs fabricated by this new technique show excellent homogeneity. Thanks to this, we scale the monolayer inverter down to sub-10 nm channel length.
RESUMO
van der Waals (vdW) homo/heterostructures are ideal systems for studying interfacial tribological properties such as structural superlubricity. Previous studies concentrated on the mechanism of translational motion in vdW interfaces. However, detailed mechanisms and general properties of the rotational motion are barely explored. Here, we combine experiments and simulations to reveal the twisting dynamics of the MoS2/graphite heterostructure. Unlike the translational friction falling into the superlubricity regime with no twist angle dependence, the dynamic rotational resistances highly depend on twist angles. Our results show that the periodic rotational resistance force originates from structural potential energy changes during the twisting. The structural potential energy of MoS2/graphite heterostructure increases monotonically from 0° to 30° twist angles, and the estimated relative energy barrier is (1.43 ± 0.36) × 10-3 J/m2. The formation of Moiré superstructures in the graphene layer is the key to controlling the structural potential energy of the MoS2/graphene heterostructure. Our results suggest that in twisting 2D heterostructures, even if the interface sliding friction is negligible, the evolving potential energy change results in a nonvanishing rotational resistance force. The structural change of the heterostructure can be an additional pathway for energy dissipation in the rotational motion, further enhancing the rotational friction force.
RESUMO
Artificial retina implantation provides an effective and feasible attempt for vision recovery in addition to retinal transplantation. The most advanced artificial retinas ever developed based on silicon technology are rigid and thus less compatible with the biosystem. Here we demonstrate flexible photoresponsive ring oscillators (PROs) based on the 2D semiconductor MoS2 for artificial retinas. Under natural light illuminations, arrayed PROs on flexible substrates serving as vision pixels can efficiently output light-intensity-dependent electrical pulses that are processable and transmittable in the human visual nerve system. Such PROs can work under low supply voltages below 1 V with a record-low power consumption, e.g. only 12.4 nW at a light intensity of 10 mW/cm2, decreased by â¼500 times compared with that of the state-of-the-art silicon devices. Such flexible artificial retinas with a simple device structure, high light-to-signal conversion efficiency, ultralow power consumption, and high tunability provide an alternative prosthesis for further clinical trials.
RESUMO
Moiré superlattices have emerged as an exciting condensed-matter quantum simulator for exploring the exotic physics of strong electronic correlations. Notable progress has been witnessed, but such correlated states are achievable usually at low temperatures. Here, we report evidence of possible room-temperature correlated electronic states and layer-hybridized SU(4) model simulator in AB-stacked MoS_{2} homobilayer moiré superlattices. Correlated insulating states at moiré band filling factors v=1, 2, 3 are unambiguously established in twisted bilayer MoS_{2}. Remarkably, the correlated electronic state at v=1 shows a giant correlated gap of â¼126 meV and may persist up to a record-high critical temperature over 285 K. The realization of a possible room-temperature correlated state with a large correlated gap in twisted bilayer MoS_{2} can be understood as the cooperation effects of the stacking-specific atomic reconstruction and the resonantly enhanced interlayer hybridization, which largely amplify the moiré superlattice effects on electronic correlations. Furthermore, extreme large nonlinear Hall responses up to room temperature are uncovered near correlated electronic states, demonstrating the quantum geometry of moiré flat conduction band.
RESUMO
The 2D semiconductor of MoS2 has great potential for advanced electronics technologies beyond silicon. So far, high-quality monolayer MoS2 wafers have been available and various demonstrations from individual transistors to integrated circuits have also been shown. In addition to the monolayer, multilayers have narrower band gaps but improved carrier mobilities and current capacities over the monolayer. However, achieving high-quality multi-layer MoS2 wafers remains a challenge. Here we report the growth of high-quality multi-layer MoS2 4-inch wafers via the layer-by-layer epitaxy process. The epitaxy leads to well-defined stacking orders between adjacent epitaxial layers and offers a delicate control of layer numbers up to six. Systematic evaluations on the atomic structures and electronic properties were carried out for achieved wafers with different layer numbers. Significant improvements in device performances were found in thicker-layer field-effect transistors (FETs), as expected. For example, the average field-effect mobility (µ FE) at room temperature (RT) can increase from â¼80 cm2·V-1·s-1 for monolayers to â¼110/145 cm2·V-1·s-1 for bilayer/trilayer devices. The highest RT µ FE of 234.7 cm2·V-1·s-1 and record-high on-current densities of 1.70 mA·µm-1 at V ds = 2 V were also achieved in trilayer MoS2 FETs with a high on/off ratio of >107. Our work hence moves a step closer to practical applications of 2D MoS2 in electronics.
RESUMO
New phase of matter usually emerges when a given symmetry breaks spontaneously, which can involve charge, spin, and valley degree of freedoms. Here, we report an observation of new correlated insulators evolved from spin-polarized states to valley-polarized states in twisted double bilayer graphene (TDBG) driven by the displacement field (D). At a high field |D | > 0.7 V/nm, we observe valley polarized correlated insulators with a big Zeeman g factor of ~10, both at v = 2 in the moiré conduction band and more surprisingly at v = -2 in the moiré valence band. Moreover, we observe a valley polarized Chern insulator with C = 2 emanating at v = 2 in the electron side and a valley polarized Fermi surface around v = -2 in the hole side. Our results demonstrate a feasible way to realize isospin control and to obtain new phases of matter in TDBG by the displacement field, and might benefit other twisted or non-twisted multilayer systems.
RESUMO
Two-dimensional heterostructures are excellent platforms to realize twist-angle-independent ultra-low friction due to their weak interlayer van der Waals interactions and natural lattice mismatch. However, for finite-size interfaces, the effect of domain edges on the friction process remains unclear. Here we report the superlubricity phenomenon and the edge-pinning effect at MoS2/graphite and MoS2/hexagonal boron nitride van der Waals heterostructure interfaces. We found that the friction coefficients of these heterostructures are below 10-6. Molecular dynamics simulations corroborate the experiments, which highlights the contribution of edges and interface steps to friction forces. Our experiments and simulations provide more information on the sliding mechanism of finite low-dimensional structures, which is vital to understand the friction process of laminar solid lubricants.
Assuntos
Grafite , Fricção , Grafite/química , Simulação de Dinâmica MolecularRESUMO
Monolayer MoS2 is an emergent 2D semiconductor for next-generation miniaturized and flexible electronics. Although the high-quality monolayer MoS2 is already available at wafer scale, doping of it uniformly remains an unsolved problem. Such doping is of great importance in view of not only tailoring its properties but also facilitating many potential large-scale applications. In this work, the uniform oxygen doping of 2 in wafer-scale monolayer MoS2 (MoS2- x Ox ) with tunable doping levels is realized through an in situ chemical vapor deposition process. Interestingly, ultrafast infrared spectroscopy measurements and first-principles calculations reveal a reduction of bandgaps of monolayer MoS2- x Ox with increased oxygen-doping levels. Field-effect transistors and logic devices are also fabricated based on these wafer-scale MoS2- x Ox monolayers, and excellent electronic performances are achieved, exhibiting promise of such doped MoS2 monolayers.
RESUMO
In 2D semiconductors, doping offers an effective approach to modulate their optical and electronic properties. Here, an in situ doping of oxygen atoms in monolayer molybdenum disulfide (MoS2 ) is reported during the chemical vapor deposition process. Oxygen concentrations up to 20-25% can be reliable achieved in these doped monolayers, MoS2- x Ox . These oxygen dopants are in a form of substitution of sulfur atoms in the MoS2 lattice and can reduce the bandgap of intrinsic MoS2 without introducing in-gap states as confirmed by photoluminescence spectroscopy and scanning tunneling spectroscopy. Field effect transistors made of monolayer MoS2- x Ox show enhanced electrical performances, such as high field-effect mobility (≈100 cm2 V-1 s-1 ) and inverter gain, ultrahigh devices' on/off ratio (>109 ) and small subthreshold swing value (≈80 mV dec-1 ). This in situ oxygen doping technique holds great promise on developing advanced electronics based on 2D semiconductors.
RESUMO
Two-dimensional molybdenum disulfide (MoS2) is an emergent semiconductor with great potential in next-generation scaled-up electronics, but the production of high-quality monolayer MoS2 wafers still remains a challenge. Here, we report an epitaxy route toward 4 in. monolayer MoS2 wafers with highly oriented and large domains on sapphire. Benefiting from a multisource design for our chemical vapor deposition setup and the optimization of the growth process, we successfully realized material uniformity across the entire 4 in. wafer and greater than 100 µm domain size on average. These monolayers exhibit the best electronic quality ever reported, as evidenced from our spectroscopic and transport characterizations. Our work moves a step closer to practical applications of monolayer MoS2.