Oxygen-bridged Schottky junction in ZnO-Ni3ZnC0.7 promotes photocatalytic reduction of CO2 to CO: Steering charge flow and modulating electron density of active sites.

Developing carbon dioxide (CO2) photocatalysts from transition metal carbides (TMCs) with abundant active sites, modulable electron cloud density, as well as low cost and high stability is of great significance for artificial photosynthesis. Building an efficient electron transfer channel between the photo-excitation site and the reaction-active site to extract and steer photo-induced electron flow is necessary but challenging for the highly selective conversion of CO2. In this study, we achieved an oxygen-bridged Schottky junction between ZnO and Ni3ZnC0.7 (denoted as Znoxide-O-ZnTMC) through a ligand-vacancy strategy of MOF. The ZnO-Ni3ZnC0.7 heterostructure integrates the photo-exciter (ZnO), high-speed electron transport channel (Znoxide-O-ZnTMC), and reaction-active species (Ni3ZnC0.7), where Znoxide-O-ZnTMC facilitates the transfer of excited electrons in ZnO to Ni3ZnC0.7. The Zn atoms in Ni3ZnC0.7 serve as electron-rich active sites, regulating the CO2 adsorption energy, promoting the transformation of *COOH to CO, and inhibiting H2 production. The ZnO-Ni3ZnC0.7 shows a high CO yield of 2674.80 µmol g-1h-1 with a selectivity of 93.40 % and an apparent quantum yield of 18.30 % (λ = 420 nm) with triethanolamine as a sacrificial agent. The CO production rate remains at 96.40 % after 18 h. Notably, ZnO-Ni3ZnC0.7 exhibits a high CO yield of 873.60 µmol g-1h-1 with a selectivity of 90.20 % in seawater.

TDA/rGO@WS with Joule heat and photothermal synergistic effect: A promising adsorption material for all-weather recovery of viscous oil spills at sea.

Oil spills are a global environmental protection challenge, and traditional adsorption materials have poor effect on low temperature and high viscosity marine oil spills. This article reports composite adsorption materials TDA/rGO@WS for viscous oil spills: loaded with rGO/TDA coating on a commercial biomass wood pulp sponge (WS), achieving Joule heating, photothermal effect and hydrophobic modification. The results showed that the TDA/rGO@WS has good photothermal conversion ability and Joule heating ability, and the temperature increased to 83.7 °C and 148 °C, respectively, under simulated solar irradiation and additional voltage at room temperature. The efficiency of adsorption at a low temperature of 5 °C increased by 22.41% at 1 sun and by 51.53% at 10 V. Temperature effectively reduced the viscosity of the offshore oil spill and ensures the efficient adsorption of oil spills at low temperatures promoted. The TDA/rGO@WS also showed good hydrophobicity (WCA=129°), excellent efficiency of water-oil separation (99.53%) and good adsorption capacity (9.4-13.68 g/g) for marine fuel oils. TDA/rGO@WS effectively solves the problem of cleaning up high-viscosity oil spills from ships in winter and polar waters, and proposes a new strategy for all-weather efficient treatment of oil spills at sea.

Spin coating epitaxial heterodimensional tin perovskites for light-emitting diodes.

Environmentally friendly tin (Sn) perovskites have received considerable attention due to their great potential for replacing their toxic lead counterparts in applications of photovoltaics and light-emitting diodes (LEDs). However, the device performance of Sn perovskites lags far behind that of lead perovskites, and the highest reported external quantum efficiencies of near-infrared Sn perovskite LEDs are below 10%. The poor performance stems mainly from the numerous defects within Sn perovskite crystallites and grain boundaries, leading to serious non-radiative recombination. Various epitaxy methods have been introduced to obtain high-quality perovskites, although their sophisticated processes limit the scalable fabrication of functional devices. Here we demonstrate that epitaxial heterodimensional Sn perovskite films can be fabricated using a spin-coating process, and efficient LEDs with an external quantum efficiency of 11.6% can be achieved based on these films. The film is composed of a two-dimensional perovskite layer and a three-dimensional perovskite layer, which is highly ordered and has a well-defined interface with minimal interfacial areas between the different dimensional perovskites. This unique nanostructure is formed through direct spin coating of the perovskite precursor solution with tryptophan and SnF2 additives onto indium tin oxide glass. We believe that our approach will provide new opportunities for further developing high-performance optoelectronic devices based on heterodimensional perovskites.

Oxaliplatin and Checkpoint Inhibitor Induces Immunogenic Cells Death and Promotes Therapeutic Efficacy in the Model of Murine Triple Positive Breast Cancer.

Various damage-associated molecular patterns (DAMPs) associated with immunogenic cell death (ICD) have been discovered, potentially leading to cancer cell elimination. Certain platinum-based compounds can trigger both cancer cell apoptosis and ICD. This study aims to investigate the effect of the therapy of anti- PDL1 with Oxaliplatin by increasing amount and increasing treatment duration of anti-PDL1 with Oxaliplatin in SK-Br-3, both in vitro and in vivo conditions. The study will use HER-2 (3+) breast cancer cell line, SKBr3. The cells will be treated with increasing concentrations of Oxaliplatin with anti-PDL1 for different durations. In vitro death of cancer cells will be measured by MTT assay, HMGB1 will be measured by western blot. Additionally, ATP release will be measured, mice will be injected with SK-Br-3 and treated with the combo therapy of anti-PDL1 with Oxaliplatin, and in vivo tumor growth will be recorded weekly for xenograft. The positive control for the experiments is cisplatin, and the negative control is IgG solution instead of aPDL1 and Oxaliplatin in PBS.There are three main possible results: (1) The combo therapy of Oxaliplatin with anti-PDL1 induces robust ICD in HER-2 triple positive breast cancer cells. (2) The combo therapy of Oxaliplatin with anti-PDL1 act as a stimulant for robust ICD in HER-2(3+) positive breast cancer cells. (3) The combo-therapy of Oxaliplatin with anti-PDL1 has no significant effect on inducing robust ICD in HER-2(3+) positive breast cancer cells. The result of the study will provide important insight into the preclinical effectiveness of Oxaliplatin with anti-PDL1 in treating HER-2 (3+) breast cancer, and it also sets the basis for future clinical studies of the drug. Future studies should focus on investigating the mechanism underlying Oxaliplatin with anti-PDL1 effectiveness in SK-Br-3.

Orientated crystallization of FA-based perovskite via hydrogen-bonded polymer network for efficient and stable solar cells.

Incorporating mixed ion is a frequently used strategy to stabilize black-phase formamidinum lead iodide perovskite for high-efficiency solar cells. However, these devices commonly suffer from photoinduced phase segregation and humidity instability. Herein, we find that the underlying reason is that the mixed halide perovskites generally fail to grow into homogenous and high-crystalline film, due to the multiple pathways of crystal nucleation originating from various intermediate phases in the film-forming process. Therefore, we design a multifunctional fluorinated additive, which restrains the complicated intermediate phases and promotes orientated crystallization of α-phase of perovskite. Furthermore, the additives in-situ polymerize during the perovskite film formation and form a hydrogen-bonded network to stabilize α-phase. Remarkably, the polymerized additives endow a strongly hydrophobic effect to the bare perovskite film against liquid water for 5 min. The unencapsulated devices achieve 24.10% efficiency and maintain >95% of the initial efficiency for 1000 h under continuous sunlight soaking and for 2000 h at air ambient of ~50% humid, respectively.

Application of graphene aerogels in oil spill recovery: A review.

Oil spills have long been a serious threat to marine environment. Physical recovery is the safest and most efficient method in the emergency disposal of offshore oil spill. Graphene aerogel (GA) has a wide application prospect in offshore oil spill emergency recovery and disposal given its unique structural characteristics. In this article, the preparation methods of GA adsorbent are summarized. On this basis, in the background of the application of offshore oil spill recovery, the related properties and targeted modification schemes of GA, such as adsorption, mechanical, and magnetic properties, as well as photothermal conversion properties for disposal of oil spills with high viscosity, are discussed. The Joule heating/photothermal conversion scheme can improve the recovery efficiency of offshore high viscosity oil spills, and adding metal composite materials can increase the magnetic performance and surface roughness of GA and facilitate positioning and recovery after offshore oil spills disposal. The challenges and prospects of modification research are also highlighted, and guidance for further optimizing the performance of GA in offshore oil spill recovery is provided.

Vapor-Assisted In Situ Recrystallization for Efficient Tin-Based Perovskite Light-Emitting Diodes.

Tin-based perovskites are a promising candidates to replace their toxic lead-based counterparts in optoelectronic applications, such as light-emitting diodes (LEDs). However, the development of tin perovskite LEDs is slow due to the challenge of obtaining high-quality tin perovskite films. Here, a vapor-assisted spin-coating method is developed to achieve high-quality tin perovskites and high-efficiency LEDs. It is revealed that solvent vapor can lead to in situ recrystallization of tin perovskites during the film-formation process, thus significantly improving the crystalline quality with reduced defects. An antioxidant additive is further introduced to suppress the oxidation of Sn2+ and increase the photoluminescence quantum efficiency up to ≈30%, which is an approximately fourfold enhancement in comparison with that of the control method. As a result, efficient tin perovskite LEDs are achieved with a peak external quantum efficiency of 5.3%, which is among the highest efficiency of lead-free perovskite LEDs.

Adaptation of soil fungi to heavy metal contamination in paddy fields-a case study in eastern China.

Soil fungi have been widely studied, but the effects of heavy metal contamination at various levels as well as the abundance and diversity of heavy metal tolerant fungi in the contaminated paddy soils are still unknown. The purpose of this study is to analyze the adaptability of fungi at different levels of heavy metal contamination to identify species that have strong adaptability to heavy metals. In this research, the technology of high-throughput sequencing was applied to study fungal communities in severe level (SL), moderate level (ML), light level (LL), and clean level (CL) for soil samples polluted by heavy metal, as well as to analyze the relations between environmental variables and fungal communities. The spearman analysis showed that 6 dominant fungal phyla and 18 dominant fungal genera were significantly correlated with these environmental variables. The α-diversity indexes of the soil fungal community from SL, ML, and CL were, mostly, drastically higher than the LL samples (p < 0.05). Meanwhile, Ascomycota, the main fungal phylum, was spotted to yield a strong tolerance towards heavy metals, especially in ML. The most dominant genera of tolerant fungi in this area, which are Aspergillus, Penicillium, and Fusarium, could absorb and transport the heavy metals with the help of nutrients under certain heavy metal contamination levels. Therefore, this study indicated that some fungi, which have strong biodegradability on heavy metals, can reduce toxicity of heavy metals and create a proper soil environment to grow food crops. Graphical abstract.

Comprehensive assessment of paddy soil quality under land consolidation: a novel perspective of microbiology.

Soil quality assessment is an important means to demonstrate how effective land consolidation is. However, the existing assessment system is not sufficient to reflect actual soil quality. So, the purpose of this study is to integrate abiological and biological indicators into a comprehensive assessment to evaluate the paddy soil quality under different land consolidation practices. Soil samples were collected from 35 paddy sites under different land consolidation practices including land merging, land leveling (LL), ditch construction (DC) and application of organic fertilizer (AO). A total of 10 paddy sites were selected under conventional tillage (CT) from non-land consolidation area as a control group in Y county, China. The results indicated that soil organic matter (OM), total nitrogen (TN), available phosphorus, bacterial functional diversity (BFD), bacterial and fungal abundances were significantly improved. Fields under LL, among all the land consolidation practices, might still face the risk of land degradation caused by low TN, OM and microbial diversity. High microbial biomass, BFD and OM were significantly higher in fields under AO in nutrient cycle. According to the results of comprehensive assessment, the samples with severe heavy metal contamination and low microbial diversity were generally concentrated in CT. These results indicated that land consolidation was an efficient technique to improve soil quality and could achieve higher quality of agricultural products.

The variation in microbial community structure under different heavy metal contamination levels in paddy soils.

As a global pollution problem, heavy metal contamination poses a serious hazard to soil microorganisms which play an extremely important role in soil chemical cycling and ecological persistence. However, the effects that different levels of heavy metal contamination in soils have on microorganisms and the interactions between them are still unclear. The purpose of this research is to analyze the microbial structure under different levels of heavy metal contamination, find out heavy metal tolerant species under different environmental conditions, then provide useful reference for the bioremediation of contaminated farmland. In this study, 16s rRNA high-throughput sequencing technology was used to investigate the microbial communities in severe level (SL), moderate level (ML), light level (LL) and clean level (CL) of heavy metal contaminated soils, and the relationships between environment variables and microorganisms were analyzed. The results showed that the concentrations of heavy metals and soil physicochemical properties had various impacts on microbial community composition under different heavy metal contamination levels. Most dominant bacteria were in significant negative correlation with Cd in ML region, and significantly correlated with TN and OM in LL region. However, there was no significant correlation between dominant fungi and the physicochemical properties in LL region. And most of the dominant fungi were significantly correlated with the heavy metal concentrations in SL region. The bacterial phyla such as Proteobacteria, Acidobacteria and Bacteroidetes showed more tolerance with heavy metal contamination in SL, ML and LL regions, respectively. Meanwhile, the dominant fungi of Ascomycota, Basidiomycota, Chytridiomycota, Glomeromycota, Zygomycota and Rozellomycota showed stronger correlations with heavy metal contamination in SL and LL regions. These results indicated that some microorganisms had strong tolerance to heavy metal contamination and had certain heavy metals digestion ability, which can create an appropriate soil environment for the growth of food crops.