RESUMO
The structure tuning of bulk graphitic carbon nitride (g-C3N4) is a critical way to promote the charge carriers dynamics for enhancing photocatalytic H2-evolution activity. Exploring feasible post-treatment strategies can lead to effective structure tuning, but it still remains a great challenge. Herein, a supercritical CH3OH (ScMeOH) post-treatment strategy (250-300 °C, 8.1-11.8 MPa) is developed for the structure tuning of bulk g-C3N4. This strategy presented advantages of time-saving (less than 10 min), high yield (over 80%), and scalability due to the enhanced mass transfer and high reactivity of ScMeOH. During the ScMeOH post-treatment process, CH3OH molecules diffused into the interlayers of g-C3N4 and subsequently participated in N-methylation and hydroxylation reactions with the intralayers, resulting in a partial phase transformation from g-C3N4 into carbon nitride with a poly(heptazine imide)-like structure (Q-PHI) as well as abundant methyl and hydroxyl groups. The modified g-C3N4 showed enhanced photocatalytic activity with an H2-evolution rate 7.2 times that of pristine g-C3N4, which was attributed to the synergistic effects of the g-C3N4/Q-PHI isotype heterojunction construction, group modulation, and surface area increase. This work presents a post-treatment strategy for structure tuning of bulk g-C3N4 and serves as a case for the application of supercritical fluid technology in photocatalyst synthesis.
RESUMO
The high exciton binding energy (Eb) and sluggish surface reaction kinetics have severely limited the photocatalytic hydrogen production activity of carbon nitride (CN). Herein, a hybrid system consisting of nitrogen defects and Pt single atoms is constructed through a facile self-assembly and photodeposition strategy. Due to the acceleration of exciton dissociation and regulation of local electron density of Pt single atoms along with the introduction of nitrogen defects, the optimized Pt-MCT-3 exhibits a hydrogen production rate of 172.0 µmol h-1 (λ ≥ 420 nm), ≈41 times higher than pristine CN. The apparent quantum yield for the hydrogen production is determined to be 27.1% at 420 nm. The experimental characterizations and theoretical calculations demonstrate that the nitrogen defects act as the electron traps for the exciton dissociation, resulting in a decrease of Eb from 86.92 to 43.20 meV. Simultaneously, the stronger interaction between neighboring nitrogen defects and Pt single atoms directionally drives free electrons to aggregate around Pt single atoms, and tailors the d-band electrons of Pt, forming a moderate binding strength between Pt atoms and H* intermediates.
RESUMO
In the ZINC20 database, with the aid of maximum substructure searches, common substructures were obtained from molecules with high-strain-energy and combustion heat values, and further provided domain knowledge on how to design high-energy-density hydrocarbon (HEDH) fuels. Notably, quadricyclane and syntin could be topologically assembled through these substructures, and the corresponding assembled schemes guided the design of 20 fuel molecules (ZD-1 to ZD-20). The fuel properties of the molecules were evaluated by using group-contribution methods and density functional theory (DFT) calculations, where ZD-6 stood out due to the high volumetric net heat of combustion, high specific impulse, low melting point, and acceptable flash point. Based on the neural network model for evaluating the synthetic complexity (SCScore), the estimated value of ZD-6 was close to that of syntin, indicating that the synthetic complexity of ZD-6 was comparable to that of syntin. This work not only provides ZD-6 as a potential HEDH fuel, but also illustrates the superiority of learning design strategies from the data in increasing the understanding of structure and performance relationships and accelerating the development of novel HEDH fuels.
RESUMO
Plastic has caused serious "white pollution" to the environment, and the highly inert characteristics of plastic bring a major challenge for degradation. Supercritical fluids have unique physical properties and have been widely used in various fields. In this work, supercritical CO2 (Sc-CO2) with mild conditions was selected and assisted by NaOH/HCl solution to degrade polystyrene (PS) plastic, and the reaction model was designed using response surface methodology (RSM). It was found that, regardless of the types of assistance solutions, the factors affecting PS degradation efficiencies were reaction temperature, reaction time, and NaOH/HCl concentration. At the temperature of 400 °C, time of 120 min, and base/acid concentration of 5% (in weight), 0.15 g PS produced 126.88/116.99±5 mL of gases with 74.18/62.78±5 mL of H2, and consumed 81.2/71.5±5 mL of CO2. Sc-CO2 created a homogeneous environment, which made PS highly dispersed and uniformly heated, thus promoting the degradation of PS. Moreover, Sc-CO2 also reacted with the degradation products to produce new CO and more CH4 and C2Hx (x=4, 6). Adding NaOH/HCl solution not only improved the solubility of PS in Sc-CO2, but also provided a base/acid environment that reduced the activation energy of the reaction, and effectively improved the degradation efficiencies of PS. In short, degrading PS in Sc-CO2 is feasible, and better results are obtained with the assistance of base/acid solution, which can provide a reference for the disposal of waste plastics in the future. Supplementary Information: The online version contains supplementary material available at 10.1007/s42768-023-00139-1.
RESUMO
Photocatalytic H2 evolution is of prime importance in the energy crisis and in lessening environmental pollution. Adopting a single semiconductor as a photocatalyst remains a formidable challenge. However, the construction of an S-scheme heterojunction is a promising method for efficient water splitting. In this work, CdS nanoparticles were loaded onto NiS nanosheets to form CdS/NiS nanocomposites using hollow Ni(OH)2 as a precursor. The differences in the Fermi energy levels between the two components of CdS and NiS resulted in the formation of a built-in electric field in the nanocomposite. Density functional theory (DFT) calculations reveal that the S-scheme charge transfer driven by the built-in electric field can accelerate the effective separation of photogenerated carriers, which is conducive to efficient photocatalytic hydrogen evolution. The hydrogen evolution rate of the optimized photocatalyst is 39.68 mmol·g-1 h-1, which is 6.69 times that of CdS under visible light. This work provides a novel strategy to construct effective photocatalysts to relieve the environmental and energy crisis.
RESUMO
Precipitation, as an important indicator describing the evolution of the regional climate system, plays an important role in understanding the spatial and temporal distribution characteristics of regional precipitation. Scientific and accurate prediction of regional precipitation is helpful to provide theoretical basis for relevant departments to guide flood and drought control. To address the uncertainty and nonlinear characteristics of precipitation series, this paper uses the established improved complete ensemble empirical mode decomposition with adaptive noise (ICEEMDAN)-wavelet signal denoising (WSD)-bi-directional long short-term memory (BiLSTM), and echo state network (ESN) models to predict precipitation of four cities in southern Anhui Province. The BiLSTM is used to predict the high-frequency components and the ESN to predict the low-frequency components, thus avoiding the influence between the two neural network predictions. The results show that the ICEEMDAN-WSD-BiLSTM and ESN models are more accurate. The average relative error reached 2.64% and the NSE (Nash-Sutcliffe efficiency coefficient) was 0.91, which was significantly better than the other four models. The model reveals the temporal change pattern and evolution characteristics of future precipitation, guides flood prevention and mitigation, and has certain theoretical significance and application value for promoting regional sustainable development.
Assuntos
Previsões , Redes Neurais de Computação , Chuva , Clima , Secas , Inundações , Previsões/métodos , Tempo (Meteorologia)RESUMO
Structure regulation (including electronic structure and morphology) for graphitic carbon nitride (g-C3N4) is an effective way to promote the photocatalytic activity. Herein, an ultrathin porous g-C3N4 (BCN-HT100) was synthesized by calcination of biuret hydrate. Hydrothermal treatment induced biuret recrystallization to form biuret hydrate precursor with regular morphology and large crystal size, thus promoting the polymerization of melem to form g-C3N4 network. Accordingly, BCN-HT100 possessed ultrathin nanosheet structure, higher polymerization degree, larger surface area and more pores than biuret-derived g-C3N4. BCN-HT100 behaved high-efficiency photocatalytic H2-productin activity with an apparent quantum yield (AQY) of 58.7% at 405 nm due to the enhanced utilization efficiency for photo-generated charge carriers and abundant reactive sites. Furthermore, Pt-NiCo2O4 dual cocatalysts were employed on BCN-HT100 for achieving photocatalytic overall water splitting, and the AQY reached 4.9% at 405 nm. This work provides a meaningful reference to designing g-C3N4 to achieve efficient solar energy conversion into hydrogen.
RESUMO
Due to structural tunability, high surface area, abundant pore structures, and abundant active sites, covalent heptazine frameworks (CHFs) constructed from heptazine and other molecular blocks are especially prominent. Here, we proposed a reaction-dependent strategy for designing two dimensional CHFs including high-throughput precursors screening, structure generation, and performance evaluation. Assuming that oxamide-like precursors can undergo the same thermal polymerization reaction as producing C6N7, seven precursors were screened from more than 109 molecules in the ZINC20 database in terms of molecular weight, number of substructures, shape index, and symmetry. Furthermore, CHF-L1 to CHF-L7 were constructed from urea and the seven precursors according to the topologically assembling scheme in thermal polymerization. The designed CHFs had band gaps ranging from 1.89 to 3.10 eV. Among them, CHF-L3 assembled structurally by urea and 1,2,4,5-tetrazine-3,6-dicarboxamide with the smallest bandgap and an oxidative potential bias of 1.38 V for oxygen evolution reaction was screened as the candidate with high oxidative ability. The negative formation energy based on the synthesis route indicated the synthetic feasibility of CHF-L3, and negative cohesive energy as well as the stable structure under ab initio molecular dynamics simulations confirmed the stability of CHF-L3. The present work is expected to provide a powerful design strategy for two-dimensional CHFs design and is broadly applicable to various computational covalent organic framework design systems and experimental studies.
Assuntos
Simulação de Dinâmica Molecular , Ureia , Oxirredução , PolimerizaçãoRESUMO
InP/ZnS core/shell quantum dots have shown extraordinary application potential in photocatalysis. In this work, we demonstrated by ultrafast spectroscopy that the electron transfer ability of InP/ZnSe/ZnS core/shell/shell quantum dots was better than that of InP/ZnS quantum dots, because the introduction of ZnSe midshell resulted in improved passivation and greater exciton delocalization. The temperature-dependent PL spectra indicate that the exciton-phonon coupling strength and exciton binding energy of InP/ZnSe/ZnS quantum dots are smaller than those of InP/ZnS quantum dots. Further photocatalytic hydrogen evolution testing revealed that the photocatalytic activity of InP/ZnSe/ZnS quantum dots was significantly higher than that of InP/ZnS quantum dots, and InP/ZnSe/ZnS quantum dots even demonstrated improved stability. This research deepened our understanding of carrier dynamics and charge separation of InP/ZnSe/ZnS quantum dots, especially highlighting the application potential of InP/ZnSe/ZnS quantum dots in photocatalytic hydrogen evolution.
RESUMO
The catalytic reactions of photoelectrochemical water splitting attracts tremendous attention as a promising strategy for clean energy production. And the research on reaction mechanism is particularly important in design and developing new catalysts. In this work, the special electrochemical tool of interdigitated array (IDA) electrodes was utilized in investigating the photoelectrochemical oxygen evolution reaction process and detecting the reaction productin situwith the generation-collection mode. TiO2was taken as a model catalyst and was decorated onto the IDA generator electrode through an electrophoresis method, so that the photoelectrochemical water splitting can take place on the IDA generator and the reaction product can be detected directly with the IDA collector in real time. It is found that TiO2can be successfully decorated onto the surface of IDA electrode with the expected photoelectrochemical activity, and the generation-collection mode reveals and distinguishes the production of O2from the overall photoelectrochemical current on TiO2generator. The mass transfer process of O2from the TiO2generator to the collector could be observed as well. Large overall current at high potential range indicates the possible increasing production of the byproducts or nonfaradaic current.
RESUMO
Graphite carbon nitride (g-C3N4) as metal-free photocatalyst has been widely studied recently in photocatalytic water reduction, which is considered as one of the promising routes to realizing the hydrogen energy-based society in the future. The generally used preparation process based on thermal polymerization of precursors easily brought the formation of aggregated nanosheets morphology, severely limiting its photocatalytic activity. Herein, the hollow tube-like morphology with porous surface was elaborately obtained by ethylene diamine tetraacetic acid (EDTA)-involved hydrothermal treatment of melamine precursor. The hollow and porous features shortened the migration distance of photo-generated carriers, trapped the incident lights, and provided more photocatalytic reactive sites, then realizing the enhanced photocatalytic H2-evolution activity up to 7.1 times that of pristine g-C3N4. The presence of EDTA acted as the pivotal role to control the recrystallization process of melamine and its derivative, cyanuric acid, and thus to determine the framework formation of the hollow tube-like microstructure. Moreover, complete thermal decomposition of cyanuric acid during the thermal polymerization of precursors was responsible for the hollow and porous features. This work extends the morphology regulation cognition of g-C3N4 based on hydrothermal treatment of precursors, and is expected to bring deep understanding and feasible strategies to design morphology-dominated highly-efficient g-C3N4 photocatalysts.
Assuntos
Grafite , Catálise , Ácido Edético , Grafite/química , Hidrogênio , Compostos de Nitrogênio , PorosidadeRESUMO
Signaling pathway alterations in COVID-19 of living humans as well as therapeutic targets of the host proteins are not clear. We analyzed 317 urine proteomes, including 86 COVID-19, 55 pneumonia and 176 healthy controls, and identified specific RNA virus detector protein DDX58/RIG-I only in COVID-19 samples. Comparison of the COVID-19 urinary proteomes with controls revealed major pathway alterations in immunity, metabolism and protein localization. Biomarkers that may stratify severe symptoms from moderate ones suggested that macrophage induced inflammation and thrombolysis may play a critical role in worsening the disease. Hyper activation of the TCA cycle is evident and a macrophage enriched enzyme CLYBL is up regulated in COVID-19 patients. As CLYBL converts the immune modulatory TCA cycle metabolite itaconate through the citramalyl-CoA intermediate to acetyl-CoA, an increase in CLYBL may lead to the depletion of itaconate, limiting its anti-inflammatory function. These observations suggest that supplementation of itaconate and inhibition of CLYBL are possible therapeutic options for treating COVID-19, opening an avenue of modulating host defense as a means of combating SARS-CoV-2 viruses.
Assuntos
COVID-19 , Humanos , Proteoma , Proteômica , SARS-CoV-2 , Transdução de SinaisRESUMO
CoP, a noble-metal-free cocatalyst, was first introduced onto the surface of Al-doped SrTiO3 (Al:STO) via an in situ photodeposition-phosphorization method for photocatalytic overall water splitting (POWS) into stoichiometric H2 and O2. Compared with pure Al:STO, the POWS activity was enhanced by a factor of ~ 421 over 1.0%CoP/Al:STO, with the highest evolution rates of 2106 and 1002 µmol h-1 g-1 for H2 and O2, respectively. The mechanism for the remarkably boosted POWS activity was systematically analyzed based on the comprehensive characterization. On the one hand, benefiting from the in situ photodeposition process, CoP with metallic character were intimately decorated onto the surface of Al:STO and accelerated the separation and migration of photoinduced charge carriers. On the other hand, CoP, serving as reactive sites for H2 evolution reaction, lowered the overpotential and facilitated the surface reduction reaction, thereby enhancing the POWS activity. Furthermore, Cr2O3 was photodeposited on the surface of 1.0%CoP/Al:STO composite to suppress the undesired reverse reaction and the POWS activity was further enhanced up to 3558 and 1722 µmol h-1 g-1 for H2 and O2, respectively, with apparent quantum yield of 7.1% at 350 ± 10 nm. This work presents a new avenue for designing POWS system without noble-metal cocatalyst.
RESUMO
Reduced graphene oxide (rGO) has conspicuous photothermal characteristics in photothermal applications. Thus in our previous work, we used reduced graphene oxide (rGO) supported titanium dioxide (TiO2) nanocomposite (rGO/TiO2) to absorb the ultraviolet and infrared light in the photothermal hydrogen evolution process. In order to make use of the full spectrum solar energy into other clear energy, the visible light should be also considered in following research. Herein, we report a cuprous oxide (Cu2O) decorated reduced graphene oxide (rGO) supported titanium dioxide (TiO2) (Cu2O-rGO/TiO2) catalysts, which can absorb full spectrum solar light in an innovative way. The Cu2O-rGO/TiO2 catalyst is synthesized through a one-step hydrothermal method. The rates of hydrogen evolution are 17800⯵mol·g-1h-1 under photothermal condition (90°C), 3800⯵mol·g-1h-1 under photocatalysis condition only (25°C) and 0⯵mol·g-1h-1 under thermal catalysis condition only. The result of photothermal catalytic hydrogen evolution rate is about 4.7 times that of the sum of the photocatalytic and thermal reactions. The photothermal synergetic effect promotes the photo-generated electron-holes separation through the rGO due to the temperature rising, and accelerates the reaction rates on the catalyst surface in hydrogen evolution process simultaneously. This work could provide us a new promising way for the conversion of full spectrum solar energy to hydrogen energy.
RESUMO
Domain-related knowledge promoted high-throughput cage scaffold screening from the ZINC15 database containing over 130â¯000 scaffolds and cooperated with combinatorial design to alleviate the lack of cage energetic materials. A dozen candidates were discovered that show excellent energy and safety performance, confirming the effectiveness of our strategy.
RESUMO
While precision medicine driven by genome sequencing has revolutionized cancer care, such as lung cancer, its impact on gastric cancer (GC) has been minimal. GC patients are routinely treated with chemotherapy, but only a fraction of them receive the clinical benefit. There is an urgent need to develop biomarkers or algorithms to select chemo-sensitive patients or apply targeted therapy. Here, we carried out retrospective analyses of 1,020 formalin-fixed, paraffin-embedded GC surgical resection samples from 5 hospitals and developed a mass spectrometry-based workflow for proteomic subtyping of GC. We identified two proteomic subtypes: the chemo-sensitive group (CSG) and the chemo-insensitive group (CIG) in the discovery set. The 5-year overall survival of CSG was significantly improved in patients who had received adjuvant chemotherapy after surgery compared with those who received surgery only (64.2% vs. 49.6%; Cox P-value=0.002), whereas no such improvement was observed in CIG (50.0% vs. 58.6%; Cox P-value=0.495). We validated these results in an independent validation set. Further, differential proteome analysis uncovered 9 FDA-approved drugs that may be applicable for targeted therapy of GC. A prospective study is warranted to test these findings for future GC patient care.
Assuntos
Medicina de Precisão/métodos , Proteômica/métodos , Neoplasias Gástricas/genética , Neoplasias Gástricas/terapia , Idoso , Algoritmos , Biomarcadores Tumorais , Quimioterapia Adjuvante/métodos , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Estudos RetrospectivosRESUMO
Poly (ADP-ribose) polymerase (PARP) inhibitor olaparib selectively kills cancer cells with BRCA-deficiency and is approved for BRCA-mutated breast, ovarian and pancreatic cancers by FDA. However, phase III study of olaparib failed to show a significant improvement in overall survival in patients with gastric cancer (GC). To discover an effective biomarker for GC patient-selection in olaparib treatment, we analyzed proteomic profiling of 12 GC cell lines. MTA2 was identified to confer sensitivity to olaparib by aggravating olaparib-induced replication stress in cancer cells. Mechanistically, we applied Cleavage Under Targets and Tagmentation assay to find that MTA2 proteins preferentially bind regions of replication origin-associated DNA sequences, which could be enhanced by olaparib treatment. Furthermore, MTA2 was validated here to render cancer cells susceptible to combination of olaparib with ATR inhibitor AZD6738. In general, our study identified MTA2 as a potential biomarker for olaparib sensitivity by aggravating olaparib-induced replication stress.
RESUMO
Two types of graphite/diamond (GD) particles with different ash content was applied to prepare new electroconductive polylactide (PLA)-based nanocomposites. Four samples of nanocomposites for each type of GD particles with mass fraction 0.01, 0.05, 0.10, and 0.15 were prepared via an easily scalable method-melt blending. The samples were subjected to the studies of electrical properties via broadband dielectric spectroscopy. The results indicated up to eight orders of magnitude improvement in the electrical conductivity and electrical permittivity of the most loaded nanocomposites, in reference to the neat PLA. Additionally, the influence of ash content on the electrical conductivity of the nanocomposites revealed that technologically less-demanding fillers, i.e., of higher ash content, were the most beneficial in the light of nanofiller dispersibility and the final properties.
RESUMO
The bridging N atom in g-C3N4 structure plays a decisive role in photo-generated charge transfer because it usually confines photo-generated electrons and holes in each heptazine, thus leading to severe recombination. In this work, a kind of 2-aminoterephthalic acid-derived benzene ring group with rich π-electrons was considered to integrate with bridging N to break the above-mentioned confining effect. On the basis of density-functional theory calculations and experimental analysis, this 2-aminoterephthalic acid-derived bridging structure facilitated to draw photo-generated charge out of heptazine unit, and its polarized asymmetric structure promoted the directional transfer of photo-generated charge carriers across adjacent heptazines, thus efficiently reducing the recombination. Meanwhile, the 2-aminoterephthalic acid-derived bridging structure also reinforced the connectivity of heptazine units in g-C3N4 framework and led to high degree of polymerization, which thus extended the π-conjugated electronic system of g-C3N4 and modulated the band structure favoring photocatalytic hydrogen production. Consequently, a high photocatalytic H2-production activity of 24,595 µmol h-1 gcat-1 was achieved on the bridging regulated g-C3N4 under visible light, with an apparent quantum yield of 48.7% at 425 nm.