Dual-Ligand Strategy to Construct Metal Organic Gel Catalyst with the Optimized Electronic Structure for High-Efficiency Overall Water Splitting and Flexible Metal-Air Battery.

Non-noble metal catalysts are known for their efficient catalytic performance for oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER). Metal organic gels (MOGs) can be considered as a promising electrocatalyst owing to the diverse physicochemical properties but usually suffer from its poor electrical conductivity and catalytic stability. Here, a FeCo-MOG is constructed with considerable trifunctional activity. The optimal P-CoFe-H3 prepared by using phytic acid (PA) and 2,4,6-Tris[(p-carboxyphenyl)amino]-1,3,5-triazine benzoic acid (H3TATAB) as dual ligands), exhibits outstanding ORR, OER, and HER activities as well as stability, exceeding most of state-of-the-art catalysts. As expected, the flexible Zn-air battery applied with P-CoFe-H3 as air cathode displays considerable power density, discharge voltage plateau, and cycling stability. Impressively, it is also capable of driving the overall water-splitting device by applying the P-CoFe-H3 as anode and cathode. Furthermore, theoretical calculations reveal that dual ligands can optimize the coordination environment and charge density of active sites, thereby reducing the absorption energy of intermediate species and boosting the catalytic performance. This work endows the dual-ligands coordination strategy with great potentiality for MOGs-based electrocatalysts in energy conversion devices.

Cognitive Function and Upper Limb Rehabilitation Training Post-Stroke Using a Digital Occupational Training System.

Stroke rehabilitation often requires frequent and intensive therapy to improve functional recovery. Virtual reality (VR) technology has shown the potential to meet these demands by providing engaging and motivating therapy options. The digital occupational training system is a VR application that utilizes cutting-edge technologies, including multi-touch screens, virtual reality, and human-computer interaction, to offer diverse training techniques for advanced cognitive capacity and hand-eye coordination abilities. The objective of this study was to assess the effectiveness of this program in enhancing cognitive function and upper extremity rehabilitation in stroke patients. The training and assessment consist of five cognitive modules covering perception, attention, memory, logical reasoning, and calculation, along with hand-eye coordination training. This research indicates that after eight weeks of training, the digital occupational training system can significantly improve cognitive function, daily living skills, attention, and self-care abilities in stroke patients. This software can be employed as a time-saving and clinically effective rehabilitation aid to complement traditional one-on-one occupational therapy sessions. In summary, the digital occupational training system shows promise and offers potential financial benefits as a tool to support the functional recovery of stroke patients.

Concomitant viral and bacterial pneumonia among patients in ICU with mechanical respiratory support.

INTRODUCTION: The use of mechanical ventilators in the intensive care unit (ICU) is often associated with higher risk of respiratory tract infections, including ventilator-associated pneumonia (VAP). Concomitant bacterial-viral infection was reported to worsen patient's clinical condition. This study evaluated the rate of concomitant bacterial-viral infections in patients with VAP and analyzed their clinical outcomes. METHODOLOGY: In this retrospective observational study 107 patients diagnosed with VAP and admitted in ICU with mechanical ventilator support between April 2018 and May 2019 in the Department of Respiratory Medicine, Dachang Hospital, Shanghai, China were included. 27 most commonly involved lower respiratory tract infection (LRTI) pathogens (bacteria and virus) and seven genetic markers of antibiotic resistance were detected and analyzed using Biofire® FilmArray® Pneumonia Panel plus (bioMérieux SA, Paris, France). RESULTS: Of the 107 patients, 45 (42.1%) patients had bacterial infection alone (bacterial group), 26 (24.3%) had virus infection alone (viral group) and 24 (22.4%) patients had concomitant bacterial-viral infection (mixed group). Sixty-nine (64.5%) and 50 (46.7%) patient samples were positive for bacterial (bacterial and mixed groups) and viral (viral and mixed groups) detection, respectively. Streptococcus pneumonia (11.2%) and Influenza A (17, 15.9%), were the predominantly identified bacterial and viral species. The blaCTX-M (21.5%) was the predominant resistance gene detected. Twenty-four (22.4%) patients were positive for concomitant bacterial-viral infection; Staphylococcus aureus and Influenza A were the most common bacterial-viral combination identified. CONCLUSIONS: Concomitant bacterial-viral infection was higher compared to previously published studies and the increased duration of mechanical ventilation was associated with increased disease severity.

Controlled Ovarian Hyperstimulation Protocol in Infertile Patients During the COVID-19 Pandemic.

Objectives: To explore the appropriate controlled ovarian hyperstimulation (COH) protocols in infertility patients who received the in vitro fertilization (IVF)/intracytoplasmic sperm injection (ICSI) treatments during the COVID-19 pandemic. Materials and Methods: This retrospective cohort study evaluated the efficiency of the early follicular-phase long-acting GnRH-agonist long (EFLL) protocol (a new protocol developed by Chinese clinicians), prolonged pituitary down-regulation of EFLL protocol (Pro-EFLL), and the GnRH-ant protocol for couples meeting the study criteria between February 2020 and June 2020 who were treated by the First Affiliated Hospital of Zhengzhou University during the COVID-19 pandemic, and compared the pregnancy rates and miscarriage rates per fresh transfer cycle, number of retrieved oocytes, endometrial thickness on the day of hCG injection and the number of fertilized oocytes, mature oocytes, fertilized oocytes, and transferable embryos among the three protocols. Results: We found that the prolonged pituitary down-regulation during the COVID-19 pandemic by utilizing a full-dose of GnRH-a administrated in infertility patients were no differences in clinical outcomes than other protocols, The prolonged pituitary down-regulation protocol and EFLL protocol were associated with a higher Endometrial thickness on the day of hCG injection (12.67 ± 2.21 vs. 12.09 ± 2.35 vs. 10.79 ± 2.38, P < 0.001), retrieved oocytes (14.49 ± 6.30 vs. 15.02 ± 7.93 vs. 10.06 ± 7.63, P < 0.001), mature oocytes (11.60 ± 5.71 vs. 11.96 ± 6.00 vs. 7.63 ± 6.50, P < 0.001), fertilized oocytes (9.14 ± 5.43 vs. 8.44 ± 5.34 vs. 5.42 ± 5.20, P < 0.001), and transferable embryos (4.87 ± 2.96 vs. 6.47 ± 5.12 vs. 3.00 ± 3.28 vs. P < 0.001) in the GnRH-antagonist protocol. Conclusion: We recommend that patients start Gn injections 33-42 days after a pituitary downregulated full dose (3.75 mg) of gonadotropin-releasing hormone agonist during the COVID-19 pandemic, even a delay of 2-4 weeks does not affect the implantation rate. The study can provide a more detailed estimate and clinical management strategies for infertile couples during the COVID-19 pandemic.

Experimental study of the optimum puncture pattern of robot-assisted needle insertion into hyperelastic materials.

The robot-assisted insertion surgery plays a crucial role in biopsy and therapy. This study focuses on determining the optimum puncture pattern for robot-assisted insertion, aiming at the matching problem of needle insertion parameters, thereby to reduce the pain for patients and to improve the reachability to the lesion point. First, a 6-degrees of freedom (DOFs) Computed Tomography (CT)-guided surgical robotic system for minimally invasive percutaneous lung is developed and used to perform puncture experiments. The effects of four main insertion factors on the robotic puncture are verified by designing the orthogonal test, where the inserting object is the artificial skin-like specimen with high transparent property and a digital image processing method is used to analyze the needle tip deflection. Next, the various phases of puncture process are divided and analyzed in detail in view of the tissue deformation and puncture force. Then, short discussion on the comparison of puncture force with different effect factors for the same beveled needle is presented. The same pattern can be observed for all of the cases. Finally, based on the experimental data, the formulations of the puncture force and needle deflection which depends on Gauge size, insertion velocity, insertion angle, and insertion depth are developed using the multiple regression method, which can be used to get an optimum puncture pattern under the constrains of minimum peak force and minimum needle tip deflection. The developed models have the effectiveness and applicability on determining the optimum puncture pattern for one puncture event, and which can also provide insights useful for the setting of insertion parameters in clinical practice.

The Influence of Chromosomal Polymorphism on Embryo Development and Embryonic Molecular Karyotype in Preimplantation Genetic Testing for Chromosomal Translocation.

Traditionally, chromosomal polymorphisms (CPMs) are normal genetic variants in individuals with no phenotypic variations. However, some studies have shown that CPM is related to reproductive diseases. We explored the influence of CPM on embryonic development and molecular karyotype in chromosomal translocation (CT) patients undergoing preimplantation genetic testing (PGT) between February 2013 and May 2019. Twenty-six cases with CPM and 56 controls with normal chromosomes were included. Furthermore, a 1:4 match pair analysis by female age included 39 cases with CTCPM and 185 controls with CT. There was no statistical difference in fertilization rate (78.48% vs. 78.33%), cleavage rate on Day 3 (90.32% vs. 89.16%), blastocyst rate (60.00% vs. 60.80%), and the high-quality blastocyst rate (36.31% vs. 35.22%) between CPM and normal chromosomes. The high-quality blastocyst rate of CTCPM was significantly lower than that for CT (26.78% vs. 38.89%). Moreover, there was no statistical difference in fertilization rate (70.65% vs. 70.37%), cleavage rate on Day 3 (88.67% vs. 89.53%), and blastocyst rate (48.48% vs. 53.17%) between CTCPM and CT. In addition, one CTCPM spouse had a lower high-quality blastocyst rate, especially of males with CTCPM. Abnormal embryo rates of CTCPM were significantly higher than those for CT (78.64% vs. 68.93%). Abnormal embryo rates were higher in both CTCPM and CPM paternal carriers with CT partners, respectively. For CT, CTCPM may have an impact on the high-quality blastocyst rate and embryonic molecular karyotype, especially in male patients. Patients with CTCPM are relatively rare, but this population would benefit from being explored using a larger sample size.

The influence of balanced complex chromosomal rearrangements on preimplantation embryonic development potential and molecular karyotype.

BACKGROUND: Balanced complex chromosome rearrangements (BCCR) are balanced chromosomal structural aberrations that involve two or more chromosomes and at least three breakpoints. It is very rare in the population. The objective is to explore the difference of influence of three types of BCCR on early embryonic development and molecular karyotype. RESULTS: Twelve couples were recruited including four couples of three-way rearrangements carriers (group A), three couples of double two-way translocations carriers (group B) and five couples of exceptional CCR carriers (group C). A total of 243 oocytes were retrievedin the seventeen preimplantation genetic testing (PGT) cycles, and 207 of these were available for fertilization. After intracytoplasmic sperm injection, 181oocytes normally fertilized. The rates of embryos forming on day3 in three groups were 87.88, 97.78 and77.14%, which was significantly different (P = 0.01). Compared with group B, the rate of embryo formation was statistically significantly lower in group C (P = 0.01). Furthermore, the rates of high-quality blastocysts in three group were 14.71, 48.15 and 62.96%, respectively, which was significantly different (P = 0.00). Compared with group B andC, the rate of high-quality blastocysts in group A was statistically significantly lower (P = 0.00;P = 0.00). Comprehensive chromosome analysis was performed on 83 embryos, including 75 trophectodermcellsand 8 blastomeres. Except 7 embryos failed to amplify, 9.01%embryos were diagnosed as euploidy, and 90.91% were diagnosed as abnormal. As for group A, the euploid embryo rate was 10.71%and the abnormal embryo rate was 89.29%. In group B,the euploid embryo rate was 3.85%, the abnormal embryo rate was 96.15%. The euploid embryo rate was 13.04%, the abnormal embryo rate was 86.96% in group C. There were no significant differences among the three groups (P = 0.55). CONCLUSIONS: The lowest rate of high quality blastocysts has been for three-way rearrangements and the lowest rate of euploidy has been for double two-way translocations, although no significant difference. Different types of BCCR maybe have little effect on the embryonic molecular karyotype. The difference of influence of BCCR on early embryonic developmentandmolecular karyotypeshould be further studied.

Lesion positioning method of a CT-guided surgical robotic system for minimally invasive percutaneous lung.

BACKGROUND: Robot-assisted puncture has gradually attracted more attention and practical clinical application. The lesion positioning and the needle positioning are the basis to ensure the accuracy of puncture and the key techniques in insertion operation. METHODS: A lesion positioning method is established which is realized only by the robot-CT system without using external positioning system, and an omnidirectional needle positioning method is also developed and realized by using VRCM, in order to make the puncture needle always keep pointing to the lesion point. A CT-guided surgical robotic system used for minimally invasive percutaneous lung is designed and the physical prototype is manufactured, to perform in-vitro experiments, thereby to validate the effectiveness of the lesion positioning method and the feasibility of omnidirectional needle positioning method. RESULTS: The accuracy of established lesion positioning method based on three non-collinear markers is within 3 mm, which is similar to that of the least squares method based on the five non-coplanar markers, but the positioning efficiency can be improved by about 40%, and the non-collinearity of markers is easier to be satisfied than non-coplanarity in practical applications. The average calculation error of the established positioning method is 0.997 mm. Moreover, the omnidirectional positioning of the puncture needle under the designed surgical robot is feasible. CONCLUSIONS: The designed surgical robot has good control accuracy and it can satisfy the requirements for use. The established lesion positioning method can provide a good precision basis for robot-assisted puncture surgery. The suitable insertion point and insertion posture can be determined by the developed omnidirectional needle positioning method. This study can provide theoretical reference for further study of path planning or autonomous positioning.

Inhibitory effect of compound Chuanxiong Kangxian granules on bleomycin-induced pulmonary fibrosis in rats.

BACKGROUND: The diverse medicinal properties of herbal compounds make them suitable candidates to treat multifactorial conditions such as pulmonary fibrosis. We investigated the effects and mechanisms of compound Chuanxiong Kangxian granules (CCKG) on a bleomycin (BLM)-induced pulmonary fibrosis model in rats. METHODS AND RESULTS: Following an intratracheal instillation of BLM, Sprague Dawley rats were intragastrically administrated with different doses of CCKG solution or hydrocortisone for 28 d, while control and BLM-treated rats were administered with saline solution. The effects of CCKG treatment on pulmonary injury were evaluated with lung wet/dry weight ratios, histopathology and levels of hydroxyproline. Oxidative stress was evaluated by detecting serum levels of glutathione and total superoxide dismutase. Inflammation was assessed by measuring levels of tumor necrosis factor-α, interleukin (IL)-1ß, and IL-6 in bronchoalveolar lavage fluid. Immunohistochemistry and western blotting was used to analyze protein expressions of matrix metalloproteinase-2, 9, α-smooth muscle actin and transforming growth factor-ß1 in lung tissue. The results indicate that CCKG treatment can ameliorate BLM-induced pulmonary fibrosis and attenuate BLM-induced oxidative stress and inflammation. CONCLUSIONS: We found that CCKG-mediated suppression of fibroproliferation and may contribute to the anti-fibrotic effect by inhibiting oxidative stress and inflammatory responses. Our study indicates a therapeutic potential for CCKG in the treatment of pulmonary fibrosis.