A microfluidic-based quantitative analysis system for the multiplexed genetic diagnosis of human viral infections using colorimetric loop-mediated isothermal amplification.

In this study, a microfluidic-based system utilizing colorimetric loop-mediated isothermal amplification (LAMP) is introduced for the quantitative analysis of nucleic acid targets. This system offers a user-friendly and cost-effective platform for the multiplexed genetic diagnosis of various infectious diseases across multiple samples. It includes time-lapse imaging equipment for capturing images of the microfluidic device during the LAMP assay and a hue-based quantitative analysis software to analyze the LAMP reaction, streamlining diagnostic procedures. An electric pipette was used to simplify the loading of samples and LAMP reagents into the device, allowing easy operation even by untrained individuals. The hue-based analysis software employs efficient image processing and post-processing techniques to calculate DNA amplification curves based on color changes in multiple reaction chambers. This software automates several tasks, such as identifying reaction chamber areas from time-lapse images, quantifying color information within each chamber, correcting baselines of DNA amplification curves, fitting experimental data to theoretical curves, and determining the threshold time for each curve. To validate the developed system, conventional off-chip LAMP assays were conducted with a 25 µL reaction mixture in 0.2 mL polymerase chain reaction (PCR) tubes using a real-time turbidimeter. The results indicated that the threshold time obtained using the colorimetric LAMP assay in the developed system is comparable to that obtained with real-time turbidity measurements in PCR tubes, demonstrating the system's capability for quantitative analysis of target nucleic acids, including those from human herpesviruses.

Automatic microdispenser-integrated multiplex enzyme-linked immunosorbent assay device with autonomously driven centrifugal microfluidic system.

In this study, we established the control and design theory of an autonomously driven dispenser at a steady rotation speed and proposed a dispenser-integrated multiplex enzyme-linked immunosorbent assay (ELISA) device. In establishing the theory of the dispenser, we estimated the flow rate in the dispenser and the applied pressure onto the passive valves, so that the suitable burst pressure of the valves and flow rate could be designed. The dispenser-integrated multiplex ELISA device has the potential to perform flow control for executing an ELISA of 6 samples/standards per chip or 18 samples/standards per compact disk by just steadily rotating a chip. In the immunoassay evaluation of the device using mouse IgG detection, it was confirmed that the device could assay 5 µL of several standards in just 30 min without nonspecific reactions, and although this system has a high limit of detection (LOD, 63.4-164 pg mL-1) it is equal to that of manual assay with a titer plate. The device can be fabricated by transferring the microchannel pattern from a mold without complex assembly or alignment, and it can control the liquid operation by just steadily rotating. Thus, the device system developed will contribute to reducing the cost of fabricating chips and control equipment for ELISA systems. Consequently, a compact, portable, and low-cost ELISA system for point-of-care testing is expected to be realized.

Visible Pulsed Laser-Assisted Selective Killing of Cancer Cells with PVP-Capped Plasmonic Gold Nanostars.

A new generation of nanoscale photosensitizer agents has improved photothermal capabilities, which has increased the impact of photothermal treatments (PTTs) in cancer therapy. Gold nanostars (GNS) are promising for more efficient and less invasive PTTs than gold nanoparticles. However, the combination of GNS and visible pulsed lasers remains unexplored. This article reports the use of a 532 nm nanosecond pulse laser and polyvinylpyrrolidone (PVP)-capped GNS to kill cancer cells with location-specific exposure. Biocompatible GNS were synthesized via a simple method and were characterized under FESEM, UV-visible spectroscopy, XRD analysis, and particle size analysis. GNS were incubated over a layer of cancer cells that were grown in a glass Petri dish. A nanosecond pulsed laser was irradiated on the cell layer, and cell death was verified via propidium iodide (PI) staining. We assessed the effectiveness of single-pulse spot irradiation and multiple-pulse laser scanning irradiation in inducing cell death. Since the site of cell killing can be accurately chosen with a nanosecond pulse laser, this technique will help minimize damage to the cells around the target cells.

Influence of DNA characteristics on cell membrane damage stimulated by electrical short-circuiting via a low-conductive aqueous droplet in dielectric oil.

We investigated gene electrotransfer using electrical short-circuiting via a cell suspension droplet in dielectric oil. An aqueous droplet of a few microliters placed between a pair of electrodes can be deformed by an intense DC electric field depending on the electric field intensity. When a droplet containing suspended cells and plasmid DNA elongates during deformation and connects the electrodes, the resulting short circuit can cause successful gene electrotransfection into various mammalian cells. We also investigated the influence of the electroporation medium on membrane permeabilization and the mechanisms of gene electrotransfection using short-circuiting via an aqueous droplet. One aim of this study was to investigate the influence of the conductivity of electroporation medium on gene electrotransfer stimulated by short-circuiting. It was found that low-conductivity medium with plasmid DNA resulted in a significant decrease in cell viability compared to the high-conductivity medium with plasmid DNA. Therefore, we demonstrated the influence of exogenous DNA on membrane damage stimulated by droplet electroporation using a low-conductivity medium. Thus, electrical stimulation with the combination of plasmid DNA and the low-conductivity medium resulted in tremendous membrane damage. Linearized plasmid DNA stimulated more significant membrane damage than circular DNA. However, the size of linear DNA did not influence the efflux of small intracellular molecules.

A Facile Fluorometric Assay of Orotate Phosphoribosyltransferase Activity Using a Selective Fluorogenic Reaction for Orotic Acid.

Orotate phosphoribosyltransferase (OPRT) exists as a bifunctional enzyme, uridine 5'-monophosphate synthase, in mammalian cells and plays an important role in pyrimidine biosynthesis. Measuring OPRT activity has been considered important for understanding biological events and development of molecular-targeting drugs. In this study, we demonstrate a novel fluorescence method for measuring OPRT activity in living cells. The technique utilizes 4-trifluoromethylbenzamidoxime (4-TFMBAO) as a fluorogenic reagent, which produces selective fluorescence for orotic acid. To perform the OPRT reaction, orotic acid was added to HeLa cell lysate, and a portion of the enzyme reaction mixture was heated at 80 °C for 4 min in the presence of 4-TFMBAO under basic conditions. The resulting fluorescence was measured using a spectrofluorometer, which reflects the consumption of orotic acid by the OPRT. After optimization of the reaction conditions, the OPRT activity was successfully determined in 15 min of enzyme reaction time without further procedures such as purification of OPRT or deproteination for the analysis. The activity obtained was compatible with the value measured by the radiometric method with [3H]-5-FU as the substrate. The present method provides a reliable and facile measurement of OPRT activity and could be useful for a variety of research fields targeting pyrimidine metabolism.

A Facile Method to Determine Prolidase Activity Using a Peptide-Specific Fluorometric Reaction.

Prolidase is the only enzyme capable of cleaving imidodipeptides containing C-terminal proline (Pro) or hydroxyproline and plays a crucial role in several physiological processes such as wound healing and cell proliferation. Here, we developed a new method to determine prolidase activity. This method is based on a novel fluorescence (FL) reaction selective for N-terminal glycine (Gly)-containing peptides using 3,4-dihydroxyphenylacetic acid (3,4-DHPAA). The 3,4-DHPAA can selectively react with Gly-Pro, the substrate for prolidase, and the prolidase activity is measured by monitoring the decrease in FL intensities. The prolidase activities in fibroblasts and HeLa cells were successfully measured by the proposed method. Compared with classical Chinard's method, our method does not require any caustic acids, pre-incubation to activate the enzyme, and heating for reaction with the detection reagent. The proposed method enables facile and specific measurement for biogenic prolidase activity.

Automated detection of patterned single-cells within hydrogel using deep learning.

Single-cell analysis has been widely used in various biomedical engineering applications, ranging from cancer diagnostics, and immune response monitoring to drug screening. Single-cell isolation is fundamental for observing single-cell activities and an automatic finding method of accurate and reliable cell detection with few possible human errors is also essential. This paper reports trapping single cells into photo patternable hydrogel microwell arrays and isolating them. Additionally, we present an object detection-based DL algorithm that detects single cells in microwell arrays and predicts the presence of cells in resource-limited environments at the highest possible mAP (mean average precision) of 0.989 with an average inference time of 0.06 s. This algorithm leads to the enhancement of the high-throughput single-cell analysis, establishing high detection precision and reduced experimentation time.

Mixing Performance of a Planar Asymmetric Contraction-and-Expansion Micromixer.

Micromixers are one of the critical components in microfluidic devices. They significantly affect the efficiency and sensitivity of microfluidics-based lab-on-a-chip systems. This study introduces an efficient micromixer with a simple geometrical feature that enables easy incorporation in a microchannel network without compromising the original design of microfluidic devices. The study proposes a newly designed planar passive micromixer, termed a planar asymmetric contraction-and-expansion (P-ACE) micromixer, with asymmetric vertical obstacle structures. Numerical simulation and experimental investigation revealed that the optimally designed P-ACE micromixer exhibited a high mixing efficiency of 80% or more within a microchannel length of 10 mm over a wide range of Reynolds numbers (0.13 ≤ Re ≤ 13), eventually attaining approximately 90% mixing efficiency within a 20 mm microchannel length. The highly asymmetric geometric features of the P-ACE micromixers enhance mixing because of their synergistic effects. The flow velocities and directions of the two fluids change differently while alternately crossing the longitudinal centerline of the microchannel, with the obstacle structures asymmetrically arranged on both sidewalls of the rectangular microchannel. This flow behavior increases the interfacial contact area between the two fluids, thus promoting effective mixing in the P-ACE micromixer. Further, the pressure drops in the P-ACE micromixers were experimentally investigated and compared with those in a serpentine micromixer with a perfectly symmetric mixing unit.

A microfluidic diagnostic device with air plug-in valves for the simultaneous genetic detection of various food allergens.

The identification of accidental allergen contamination in processed foods is crucial for risk management strategies in the food processing industry to effectively prevent food allergy incidents. Here, we propose a newly designed passive stop valve with high pressure resistance performance termed an "air plug-in valve" to further improve microfluidic devices for the detection of target nucleic acids. By implementing the air plug-in valve as a permanent stop valve, a maximal allowable flow rate of 70 µL/min could be achieved for sequential liquid dispensing into an array of 10 microchambers, which is 14 times higher than that achieved with the previous valve arrangement using single-faced stop valves. Additionally, we demonstrate the simultaneous detection of multiple food allergens (wheat, buckwheat, and peanut) based on the colorimetric loop-mediated isothermal amplification assay using our diagnostic device with 10 microchambers compactly arranged in a 20-mm-diameter circle. After running the assays at 60 °C for 60 min, any combination of the three types of food allergens and tea plant, which were used as positive and negative control samples, respectively, yielded correct test results, without any cross-contamination among the microchambers. Thus, our diagnostic device will provide a rapid and easy sample-to-answer platform for ensuring food safety and security.

Synthesis and Evaluation of Oligonucleotide-Containing 2'-O-{[(4,5',8-Trimethylpsoralen)-4'-ylmethoxy]ethylaminocarb-onyl}adenosine as Photo-crosslinkable Gene Targeting Tools.

Several psoralen-conjugated oligonucleotides (Ps-Oligos) have been developed as photo-crosslinkable oligonucleotides targeting DNA or RNA. To avoid potential off-target effects, it is important to investigate the selective photo-crosslinking reactivity of Ps-Oligos to DNA or RNA. However, the selectivity of these Ps-Oligos has not been reported in detail thus far. In this study, we evaluated the photo-crosslinking properties of two Ps-Oligos, 5'-Ps-Oligo and a novel Ps-Oligo containing 2'-O-{[(4,5',8-trimethylpsoralen)-4'-ylmethoxy]ethylaminocarbonyl}adenosine (APs2-Oligo). Notably, 5'-Ps-Oligo preferentially crosslinked with DNA, whereas APs2-Oligo preferentially crosslinked with RNA. These results demonstrate the interesting crosslinking properties of Ps-Oligos, which will provide useful information for the molecular design of novel Ps-Oligos in future studies.

Influence of Electroporation Medium on Delivery of Cell-Impermeable Small Molecules by Electrical Short-Circuiting via an Aqueous Droplet in Dielectric Oil: A Comparison of Different Fluorescent Tracers.

Membrane permeabilization stimulated by high-voltage electric pulses has been used to deliver cell-impermeable exogenous molecules. The electric field effect on the cells depends on various experimental parameters, such as electric field strength, the number of electric pulses, and the electroporation medium. In this study, we show the influence of the electroporation medium on membrane permeabilization stimulated by electrical short-circuiting via an aqueous droplet in dielectric oil, a novel methodology developed by our previous investigations. We investigated the membrane permeabilization by three methods, influx of calcium ions, uptake of nucleic acid-binding fluorophores (YO-PRO-1), and calcein leakage. We demonstrated that the external medium conductivity had a significant impact on the cells in all described experiments. The short-circuiting using a low-conductivity electroporation medium enhanced the formation of both transient and irreversible membrane pores. We also found that clathrin-mediated endocytosis contributed to YO-PRO-1 uptake when a cell culture medium was used as an electroporation medium.

A method of sequential liquid dispensing for the multiplexed genetic diagnosis of viral infections in a microfluidic device.

In this study, we introduce polydimethylsiloxane (PDMS)-based microfluidic devices capable of sequential dispensing of samples into multiple reaction microchambers in a single operation to provide a fast and easy sample-to-answer platform for multiplexed genetic diagnosis of multiple viral infectious diseases. This approach utilizes the loop-mediated isothermal amplification (LAMP) method to amplify and detect specific nucleic acid (DNA/RNA) targets. We present a microfluidic flow control theory for sequential liquid dispensing phenomena, which provides design guidelines for device optimization. The device specifications, such as the possible dispensing number and maximal allowable flow rate, can be theoretically designed by optimizing the geometric dimensions of the microchannels and a pair of passive stop valves integrated into each microchamber together with the water contact angles of the materials used to fabricate the microfluidic devices. In addition, a passive stop valve with a vertical-type phaseguide structure was designed to improve device performance. We could simultaneously diagnose coronavirus disease 2019 (COVID-19) and other infectious diseases, such as severe acute respiratory syndrome (SARS), seasonal influenza A, and pandemic influenza A (H1N1) 2009. The colorimetric reverse transcription LAMP (RT-LAMP) assay suggests that the four viral infectious diseases can be detected within 30 min using a hue-based quantitative analysis, and the naked eye using our microfluidic devices.

Electron transfer phase transition and oxidization process in NaxCo0.44Mn0.56[Fe(CN)6]0.90 (0.00 ≤ x ≤ 1.60).

We investigated the phase diagram of NaxCo0.44Mn0.56[Fe(CN)6]0.90 in the entire Na concentration range of 0.00 ≤ x ≤ 1.60. We found that the compound shows an electron transfer (ET) phase transition in a wide x range of 0.19 ≤ x ≤ 1.38. The extended ET model well reproduces the variation of the [Fe2+(CN)6]4- and [Fe3+(CN)6]3- concentration at the phase transition. The ET phase transition reverses the oxidation process of the compound; the process is in the order of Co, Mn, and Fe (Fe, Mn, and Co) in the low (high) temperature phase.

A 2.0-GHz compact ESR spectrometer for monitoring automobile lubrication oil degradation.

This article reports a simple, compact, and cost-effective electron spin resonance (ESR) spectrometer for monitoring automobile lubrication oil degradation. Lubrication oil degradation strongly correlates with the concentration of stable free radicals caused by hydrocarbon chain decomposition due to heating. For the prototype spectrometer, the amplitude shift in a marginal oscillator output detects ESR absorption in a sample. The spectrometer's spin sensitivity of 2.3 × 1014 spins for a used oil sample was achieved using the marginal oscillator with a loop-gap resonator. For the prototype spectrometer, the oscillation frequency was 2.09 GHz. The volume of the prototype spectrometer was 1.3 L, including a permanent magnet, microwave circuits, and digital communication circuitry on printed circuit boards. The weight of the spectrometer setup was 1.45 kg. This prototype spectrometer successfully detected the ESR signal from a 50 µL oil sample (spin concentration 8.3 x1019 spins/L) with a signal-to-noise ratio of 37 and an acquisition time of 30 s.

A Facile Method for the Quantification of Urinary Uracil Concentration by a Uracil-Specific Fluorescence Derivatization Reaction.

A facile and reliable fluorescence method for the quantification of urinary uracil concentration is proposed herein. The assay utilizes a specific fluorescence (FL) derivatization reaction for uracil using 3-methylbenzamidoxime as a fluorogenic reagent. Although the presence of urine inhibited the FL reaction, 10 µL of urine was sufficient for the detection of urinary uracil. The uracil derivative was successfully separated from other fluorescent impurities using simple reversed-phase LC with FL detection. Urinary uracil concentrations from 16 people were compared with the concentrations obtained by the traditional column-switching liquid chromatographic analysis with UV detection. The FL derivative of uracil appeared as a single peak in the chromatograms of all samples. However, several samples showed an additional peak overlapping the uracil peak when using the column-switching method because of UV-active impurities. These results indicated that that the present method is not affected by interfering substances in urine and affords a precise determination of urinary uracil. We expect the proposed method to be applicable for diagnosing dihydropyrimidine dehydrogenase deficiency in 5-fluorouracil chemotherapy.

In situ IR spectroscopy during oxidation process of cobalt Prussian blue analogues.

Cobalt Prussian blue analogues (Co-PBA; NaxCo[Fe(CN)6]y), consisting of cyano-bridged transition metal network, -Fe-CN-Co-NC-Fe-, are promising cathode materials for Na-ion secondary batteries. In the oxidation process, oxidization of Fe and/or Co are compensated by Na+ deintercalation. Here, we investigated the oxidization process of three Co-PBAs by means of in situ infrared absorption (IR) spectroscopy. With use of an empirical rule of the frequencies of the CN- stretching mode in ferrocyanide ([FeII(CN)6]4-) and ferricyanide ([FeIII(CN)6]3-), the oxidation processes of Co-PBAs were determined against the Fe concentration (y) and temperature (T). We will discuss the interrelation between the oxidation processes and Fe concentration (y).

Photocatalytic Nanofabrication and Intracellular Raman Imaging of Living Cells with Functionalized AFM Probes.

Atomic force microscopy (AFM) is an effective platform for in vitro manipulation and analysis of living cells in medical and biological sciences. To introduce additional new features and functionalities into a conventional AFM system, we investigated the photocatalytic nanofabrication and intracellular Raman imaging of living cells by employing functionalized AFM probes. Herein, we investigated the effect of indentation speed on the cell membrane perforation of living HeLa cells based on highly localized photochemical oxidation with a catalytic titanium dioxide (TiO2)-functionalized AFM probe. On the basis of force-distance curves obtained during the indentation process, the probability of cell membrane perforation, penetration force, and cell viability was determined quantitatively. Moreover, we explored the possibility of intracellular tip-enhanced Raman spectroscopy (TERS) imaging of molecular dynamics in living cells via an AFM probe functionalized with silver nanoparticles in a homemade Raman system integrated with an inverted microscope. We successfully demonstrated that the intracellular TERS imaging has the potential to visualize distinctly different features in Raman spectra between the nucleus and the cytoplasm of a single living cell and to analyze the dynamic behavior of biomolecules inside a living cell.

A Microfluidic Diagnostic Device Capable of Autonomous Sample Mixing and Dispensing for the Simultaneous Genetic Detection of Multiple Plant Viruses.

As an efficient approach to risk management in agriculture, the elimination of losses due to plant diseases and insect pests is one of the most important and urgent technological challenges for improving the crop yield. Therefore, we have developed a polydimethylsiloxane (PDMS)-based microfluidic device for the multiplex genetic diagnosis of plant diseases and pests. It offers unique features, such as rapid detection, portability, simplicity, and the low-cost genetic diagnosis of a wide variety of plant viruses. In this study, to realize such a diagnostic device, we developed a method for the autonomous dispensing of fluid into a microchamber array, which was integrated with a set of three passive stop valves with different burst pressures (referred to as phaseguides) to facilitate precise fluid handling. Additionally, we estimated the mixing efficiencies of several types of passive mixers (referred to as chaotic mixers), which were integrated into a microchannel, through experimental and computational analyses. We first demonstrated the ability of the fabricated diagnostic devices to detect DNA-based plant viruses from an infected tomato crop based on the loop-mediated isothermal amplification (LAMP) method. Moreover, we demonstrated the simultaneous detection of RNA-based plant viruses, which can infect cucurbits, by using the reverse transcription LAMP (RT-LAMP) method. The multiplex RT-LAMP assays revealed that multiple RNA viruses extracted from diseased cucumber leaves were successfully detected within 60 min, without any cross-contamination between reaction microchambers, on our diagnostic device.

Scalable Parallel Manipulation of Single Cells Using Micronozzle Array Integrated with Bidirectional Electrokinetic Pumps.

High throughput reconstruction of in vivo cellular environments allows for efficient investigation of cellular functions. If one-side-open multi-channel microdevices are integrated with micropumps, the devices will achieve higher throughput in the manipulation of single cells while maintaining flexibility and open accessibility. This paper reports on the integration of a polydimethylsiloxane (PDMS) micronozzle array and bidirectional electrokinetic pumps driven by DC-biased AC voltages. Pt/Ti and indium tin oxide (ITO) electrodes were used to study the effect of DC bias and peak-to-peak voltage and electrodes in a low conductivity isotonic solution. The flow was bidirectionally controlled by changing the DC bias. A pump integrated with a micronozzle array was used to transport single HeLa cells into nozzle holes. The application of DC-biased AC voltage (100 kHz, 10 Vpp, and VDC: -4 V) provided a sufficient electroosmotic flow outside the nozzle array. This integration method of nozzle and pumps is anticipated to be a standard integration method. The operating conditions of DC-biased AC electrokinetic pumps in a biological buffer was clarified and found useful for cell manipulation.

Energy harvesting thermocell with use of phase transition.

A thermocell that consists of cathode and anode materials with different temperature coefficients (α = dV/dT) of the redox potential (V) can convert environmental thermal energy to electric energy via the so-called thermal charging effect. The output voltage Vcell of the current thermocell, however, is still low (several tens mV) and depends on temperature, which are serious drawbacks for practical use of the device as an independent power supply. Here, we report that usage of phase transition material as electrode qualitatively improve the device performance. We set the critical temperature (Tc) for the phase transition in cobalt Prussian blue analogue (Co-PBA; NaxCo[Fe(CN)6]y) to just above room temperature, by finely adjusting the Fe concentration (y = 0.82). With increase in the cell temperature (Tcell), Vcell of the NaxCo[Fe(CN)6]0.82 (NCF82)/NaxCo[Fe(CN)6]0.9 (NCF90) cell steeply increases from 0 mV to ~120 mV around 320 K. Our observation indicates that the thermocell with use of phase transition is a promising energy harvesting device.