Designing anterior cantilever resin-bonded fixed dental prostheses based on finite element analysis.

PURPOSE: A resin-bonded bridge (RBB) is a minimally invasive prosthetic treatment option for intact adjacent teeth. However, it is contentious as to whether the mesial or distal adjacent tooth should be used as an abutment. This study aimed to investigate the potential of finite element analysis (FEA) for the selection of abutment teeth and the determination of the optimal design for anterior cantilever RBBs. METHODS: Three types of RBBs were designed to simulate loss of the maxillary left lateral incisor. The fixed-fixed RBB (FF-RBB) had one retainer each for the left central incisor and canine. Distal- and mesial-cantilever RBBs (D-CRBB and M-CRBB) had a single retainer on the central incisor and canine, respectively. Three-dimensional models for FEA were generated from computed tomography slices and dental casts. FEA was performed for each RBB to evaluate stresses in the intercuspal, protrusive, and lateral mandibular positions. RESULTS: The maximum principal stresses on the bridges in the intercuspal position were 141.9 MPa, 93.6 MPa, and 45.7 MPa, for the FF-RBB, D-CRBB, and M-CRBB, respectively. The stress in the D-CRBB position was greater than in the M-CRBB position in the intercuspal, protrusive, and lateral mandibular positions. CONCLUSIONS: Based on the results, M-CRBB on the canine had a higher clinical performance than D-CRBB on the central incisor. FEA was useful for determining the optimal design of RBB for each patient.

Fabrication of mucocompressive splints for free gingival grafts via medical engineering in patients with reconstructed mandibles.

PURPOSE: Acquiring adequate attached mucosa is important in restoring masticatory function with a removable dental prosthesis or dental implant. In patients with inadequate attached mucosa, a free gingival graft (FGG) with a custom stent is used. However, it is challenging to apply the conventional method for fabricating a stent with a reshaped cast in patients with reconstructed mandibles because the reconstructed mandible has limitations due to a titanium mesh, skin flap, and unique bone morphology. In the present report, we have proposed a new design and fabrication process for a mucocompressive splint via medical engineering to acquire the attached mucosa for the prosthodontic treatment of reconstructed mandibles. METHODS: Three-dimensional (3D) craniomandibular models were reconstructed from a computed tomography dataset after mandibular reconstruction. The dentition region was replaced with highly precise scan data of the dental casts using a 3D scanner. The alveolar ridge mucosa and teeth were ideally designed using the 3D model while referring to the anatomical structures. The jig used to fabricate the working dental cast with artificial gum in real space was designed and fabricated using a 3D printer. The alveolar ridge was altered into a simulated configuration on the articulator using a jig. A mucocompressive splint was fabricated on an altered dental cast. The splint was immediately seated on the mandible without any major adjustments after the FGG. CONCLUSION: Adequate attached mucosa for the prosthodontic treatment of a reconstructed mandible was obtained by the pre-surgical fabrication of a mucocompressive splint through medical engineering.

Considerations for the selection of interim restoration materials using wear test results.

PURPOSE: The purpose of this study was to examine the wear of resin materials using two-body wear tests and to verify a selection method for optimal interim restoration materials from findings of a diagnostic occlusal device. METHODS: Specimens were prepared from nine different resins used for diagnostic occlusal devices (soft resin) and interim restorations. Wear tests were conducted using an abrasion testing machine. The resulting wear on resin specimens and antagonist stainless-steel styluses was measured using a laser confocal scanning microscope, and the surface conditions were observed through a scanning electron microscope. The data were analyzed with one-way ANOVA and Tukey's multiple comparison test. The findings of the previous study on diagnostic occlusal devices were referred to in order to verify the selection method of optimal interim restoration materials. RESULTS: The maximum wear depth of the soft resin specimens was significantly greater than that of the other specimens (p<0.05) and was equivalent to the wear depth of a diagnostic occlusal device used for 14 nights. The wear of bis-acryl resin material was shallower than that of the other materials (Polymethyl methacrylate and polyethyl methacrylate), and its antagonist stylus was significantly worn (p<0.05). CONCLUSION: The findings of the previous and present studies showed a relationship among the parameters of Electromyography, wear depth of the diagnostic occlusal device, and wear of materials used for interim restorations. Findings related to bruxism can guide in the selection of interim restoration material and the determination of a suitable duration of wear.

Association of masticatory muscle activity with sleep arousal and other concomitant movements during sleep.

OBJECTIVE: This study aims to verify the associations among sleep bruxism (SB), sleep arousal (SA) and concurrent body movements. MATERIAL AND METHODS: Subjects underwent a standard overnight polysomnography test and audio-video recordings. Sleep quality was evaluated according to the Rechtschaffen and Kales criteria, while SA was determined as per the American Sleep Disorders Association criteria. Analyses were performed by an external institution after masking of the subjects' information. SB was assessed based on the presence/absence of rhythmic masticatory muscle activity (RMMA) episodes, which were identified by using electromyography of the masseter muscle. The observed simultaneous movements included lower leg movement (LLM), swallowing, face scratching, head movement, body movement, eye blinking, coughing, licking, sighing, body scratching, lip sucking, somniloquy and yawning. The LLM was determined visually, as well as through an increase in the tibialis electromyogram signal. Other movements were visually assessed using audio-video recordings. The incidences of all the simultaneous movements were compared between RMMA with intercurrent SA (SAwRMMA; RMMA episode derived from a masseter electromyogram showing more than 10% of maximum voluntary contraction) and SA without RMMA (SAw/oRMMA). RESULTS: Fourteen subjects were included in this study (females/males: 4/10, mean age: 31.5 ± 5.7 years). Among these, LLM, swallowing, body movement, licking, body scratching and lip sucking were frequently observed in SAwRMMA episodes than in SAw/oRMMA episodes, significantly. However, the non-specific simultaneous movements were higher observed in SAw/oRMMA episodes than that in SAwRMMA. CONCLUSION: Our results suggest that SB is concurrently activated with LLM in relation to arousal.

Mandibular 3-dimensional finite element analysis for a patient with an aggressive form of craniofacial fibrous dysplasia.

The longitudinal change in mandibular volume and configuration was quantitatively evaluated in a patient with craniofacial fibrous dysplasia (FD). The influence of mechanical stress on the enlargement that is characteristic of FD was verified via finite element analysis (FEA). The patient was a 38-year-old man diagnosed with craniofacial FD in the mandible. He underwent surgical reduction of FD, but the lesion continued to grow and caused facial asymmetry and masticatory disturbance because of missing teeth. An occlusal overlay removable partial denture was constructed for his lower jaw. Computed tomography (CT) images were acquired 4 times in 10 years, and 3-dimensional (3-D) models were reconstructed from these data. The 3-D models were analyzed volumetrically and morphologically and used for FEA. The FD lesion in the mandible enlarged nonuniformly and had site specificity. From the results of FEA, it is suggested that compression stress induced by the occlusal force through the denture may have influenced the direction of enlargement in FD.

Consistency of supplied food and dentition status of the elderly in residential care homes.

BACKGROUND: The association between oral health and malnutrition has been investigated in detail. The nutrition of elderly subjects in residential care homes is determined by caregivers, dietitians or nutritionists and managed by changing the consistency of their supplied food. However, few reports have described the relationship between oral condition and supplied food consistency. The objective of this study was to determine dentition status and care levels that correlate with supplied food consistency among elderly residents of care facilities. In addition, we estimated the care level at which ordinary food consistency can be supplied by caregivers who cannot diagnose dental status. METHOD: Several factors, including dentition, wearing removable dentures, meals categorized as ordinary or processed (sliced, mashed, or liquefied), and care levels according to the Japanese standardized care-needs certification system were investigated in 276 elderly residents (male, n = 56; female, n = 220; mean age, 87.68 ± 5.94 years) of 12 fee-based care facilities. RESULTS: The results of this study showed that care levels were significantly correlated with the consistency of the food supplied to the residents. When supplied food consistency was categorized as ordinary or processed, the number of remaining teeth and the number of tooth contact pairs, either natural or artificial, were statistically significant. From logistic regression analysis, it was determined that the numbers of tooth contact pairs were statistically significant among residents requiring high levels of care. CONCLUSION: The number of tooth contact pairs, either natural or artificial, was one of the contributing factors for deciding supplied food consistency among elderly residents of care facilities. Elderly residents requiring less than care level 3 should have ordinary meals.

Pre-endodontic Post and Core Technique for Endodontic and Prosthodontic Treatment.

INTRODUCTION: Displacement of provisional fixed prostheses may result in undesirable and embarrassing outcomes in dental treatments, especially in endodontic treatment. Development of certain counter measures has been necessary to avoid such discomforts. AIM: The aim of this report was to propose a pre-endodontic post and core technique to achieve smooth progress of the treatment. MATERIALS AND METHODS: The patient was a 59-year-old male diagnosed with an infraocclusion caused by wear of his teeth. He received full mouth provisional fixed restorations for a complete oral rehabilitation. Displacement and fracture of the restorations frequently occurred during the observation period for the function of the restorations. Therefore, the pre-endodontic post and core technique was applied to the abutment teeth before their endodontic treatments were started. The technique consisted of three steps as follows: Step 1: Caries removal and dowel preparation were performed for the abutment teeth having apical periodontitis. Composite cores were indirectly fabricated, which had access holes for endodontic treatment. Step 2: The cores were bonded to the teeth. In endodontic treatment, rubber dam appliances were easily placed owing to the core, and proper tooth isolation was accomplished. Step 3: Fiberposts were bonded to the dowel holes through the access holes after the root canal filling. During endodontic treatment, displacement and/or fracture of the provisional restorations did not occur. CONCLUSION: The pre-endodontic post and core technique was effective in obtaining improved retention of provisional restoration, appropriate isolation for endodontic treatment, and sufficient retention of the post and core. CLINICAL SIGNIFICANCE: The pre-endodontic post and core technique is useful for avoiding the discomforts in dental treatments, namely, a smooth transition from endodontic to prosthodontic treatment can be achieved.

Evaluation of sleep bruxism with a novel designed occlusal splint.

PURPOSE: This report presents our evaluation system that assesses sleep bruxism. The characteristics and fabrication process of our novel designed splint, and the analysis process of our system are presented. METHODS: The subjects were 17 volunteers. The splint was fabricated with a self-curing resin compounded with an amino-acid powder for easy wear on the semi-adjustable articulator, and adjusted for a full-balanced occlusion. An impression of the splint, located on the cast, was taken before and after it was worn. The analytical casts were made and scanned via a dental 3D scanner. The datasets were superimposed using two kinds of regions of interest (palate and occlusal surface). The differences between the two datasets were quantitatively presented with pseudo-color mapping. The maximum differences in coronal and apical directions were calculated on the selected area in the occlusal surface when the occlusal surface was used as a region of interest for registration. The relationship between the EMG activities and the change of occlusal surface of the splint were investigated. RESULTS: In all subjects, deformation and wear facets on the splint were observed. The differences in the apical direction, which indicate wear depth, were correlated with the maximum muscle activity during sleep (p=0.036). CONCLUSION: From our results, it is suggested that we are not able to eliminate the influence of parafunction for the prosthesis only by designing the surface of occlusal splint using the semi-adjustable articulator. Our splint may have the potential to detect specific facets due to parafunctions as nocturnal bruxism.

Mandibular movement during sleep bruxism associated with current tooth attrition.

PATIENT: Observation of attrition patterns suggests that mandibular movement in sleep bruxism (SB) may be associated with current tooth attrition. The aim of this study was to confirm this phenomenon by investigating mandibular movement and masseter muscle activity. The subject was a healthy 21-year-old Japanese male. We recorded biological signals including mandibular movement and masseter electromyograms (EMGs) with a polysomnograph. Based on the EMG using Okura's criteria, SB events were classified into clenching, grinding and mixed types according to mandibular movement criteria. The close-open mandibular movement cycles (CO-cycles) during grinding and mixed type events were selected based on mandibular movement trajectories. DISCUSSION: Fifty-eight CO-cycles were selected in seven grinding and three mixed types. We found that SB mandibular movements associated with current tooth attrition. Excessive lateral movements (ELM) beyond the canine edge-to-edge position were observed in the closing (10.3%) and opening (13.8%) phases of the CO-cycle. Total masseter muscle activity was significantly higher during voluntary grinding (VGR) than during CO-cycle including ELM (working side: P=0.036, balancing side: P=0.025). However, in the middle and late parts of the opening phase, working side masseter muscle activity was significantly higher during CO-cycle including ELM than during VGR (P=0.012). In the early part of the closing phase, balancing side masseter muscle activity was significantly higher during CO-cycle including ELM than during VGR (P=0.017). CONCLUSION: These findings suggest that excessive forceful grinding during ongoing SB events may have caused canine attrition in this patient.

Comparison between flipped classroom and team-based learning in fixed prosthodontic education.

PURPOSE: We previously investigated the effects of team-based learning (TBL) on fixed prosthodontic education and reported that TBL could have higher efficiency with high student satisfaction than traditional lecture. In the current report, we introduced flipped classroom to the fixed prosthodontic education and compared their effectiveness based on the final examination score in addition to TBL. METHODS: Participants were 41 students from Tokushima University School of Dentistry who attended a fixed prosthodontics course. The first six classes adopted the flipped classroom style while the latter eight classes adopted TBL. To evaluate the relationship between learning styles and their effectiveness, we compared results from the term-end examination between the curriculum covered by flipped classroom and TBL-style classes. To draw comparisons, a referential examination with the same questions was conducted to eight faculty members who had not attended any of these classes. RESULTS: Term-end examination results showed that TBL classes had slightly higher scores than flipped classroom classes. Referential examination results also showed higher scores for the same curriculum and no significant interaction was found between class formats and the term-end and referential examination scores. Analysis revealed no noticeable difference in the effectiveness of the class formats. CONCLUSION: Our previous study reported that TBL had higher efficiency than traditional style lecture. In the current study, there was no statistical difference in the examination score between flipped classroom and TBL. Therefore, we conclude that both styles are highly effective than traditional style lecture and constitute valid formats for clinical dental education.

A preliminary investigation of reproducibility of EMG signals during daytime masticatory muscle activity using a portable EMG logging device.

Continuous parafunctional masseter muscle activities (MMA) that are associated with daytime bruxism have been suspected to be one of the main pathoetiology for orofacial pain. The purpose of this study was to examine the long-term stability and reliability of daytime EMG measurement of MMA using a portable device (Actiwave; CamNtech Ltd). Daytime masseter muscle EMG of five subjects were recorded for four days in their normal living environment. There was no significant time dependent effect on EMG amplitude during recording period. A total of 4923 MMA events were detected in all analysis periods (129.4h) and classified into phasic type (1209 events, 24.6%), tonic type (1759 events, 37.0%), and mixed type (1377 events, 28.0%). There was no significant difference in the number of occurrence among three MMA types. With respect to the duration and peak MMA, there were significant differences among three MMA types. The result of this study indicated that Actiwave can be used to measure MMA events during daytime with high stability and reliability under the normal living environment and it was suspected that parafunctional habits may be associated with the occurrence patterns of MMA during daytime.

Diagnosis and treatment for obstructive sleep apnea: Fundamental and clinical knowledge in obstructive sleep apnea.

PURPOSE: This review article covers the diagnosis and treatment of obstructive sleep apnea (OSA) from a dental perspective. It addresses the issue of when and how to screen for and then, if indicated, refer the patient for a more comprehensive. STUDY SELECTION: Our focus in this article was on identifying current unanswered questions that relevant to OSA problems that dental scientists have to pursue and on providing valuable information on that problems, consequently the previous studies which investigated or reviewed the diagnosis and treatment of OSA were included. In addition, we included studies on jaw movements during sleep and on the use of a lateral cephalometric film related to the diagnosis and treatment of OSA. RESULTS: The role of portable sleep monitoring devices versus full laboratory polysomnography is discussed. This review also describes what is known about the efficacy of mandibular advancement devices and when and how they fit in to a treatment program for a patient with obstructive sleep apnea. Finally some basic research is presented on jaw movements during sleep and how a lateral cephalometric film can be used to assess the changes of the airway with body posture and head posture. CONCLUSION: This article provides the valuable suggestions for the clinical questions in the diagnosis and treatment of OSA.

Effects of team-based learning on fixed prosthodontic education in a Japanese School of Dentistry.

The aims of this study were to evaluate the quality of team-based learning (TBL) in prosthodontics education for fourth-year dental students at Tokushima University School of Dentistry and to compare this teaching method with traditional lecture-based delivery. Participants in the study were 36 students (22 males and 14 females) who attended the TBL-style fixed prosthodontics course. Ten 60-minute classes were held. The first three were traditional lecture-style classes and were followed by one class introducing the TBL style. The remaining six classes constituted the TBL-format fixed prosthodontics course. The effectiveness of TBL was evaluated through student questionnaires at the end of each class and the results of the term-end examination. The questionnaire revealed high student approval for TBL-style learning, and active group discussion among students during TBL was a key factor in these ratings. In the results of the term-end examination, there were significantly higher scores on the questions that covered TBL-taught material than those covering traditional lecture-taught topics. The results of this study suggest that TBL-style lecture was more effective than traditional-style lecture for teaching fixed prosthodontics and that TBL was a more efficient mode of delivering dental education than traditional lecture-based teaching.

Effect of an exclusion range of jaw movement data from the intercuspal positionon the estimation of the kinematic axis point.

In patients who have lost natural occlusal contacts, the centric relation is usually estimated based on several anatomical factors such as the temporomandibular joint and masticatory muscles except dental arch. The clinical procedure to record the centric relation often depends on the clinician's expertise and technique; an objective method to determine proper occlusal position is desirable. The kinematic axis point (KAP) is kinematically estimated from sagittal movements and is an ideal posterior reference point that is used in dental articulators for reproducing jaw movement. Occlusal registration using the KAP may serve as a definite objective technique. The aim of this study is to investigate the effect of the exclusion range of sagittal jaw movement data from the intercuspal position (ICP) on the estimation of the KAP. The complete and incomplete sagittal border movement data of dentate subjects were used to estimate the KAPs. The locations of the estimated KAPs were compared. The results indicate that the incomplete sagittal border jaw movement data set does not include data points inside a 7 mm distance from the ICP can be used for estimation of the KAP. In conclusion, the sagittal border jaw movement data around the ICP is not indispensable in the valid identification of the KAP.

Development of a novel articulator that reproduced jaw movement with six-degree-of-freedom.

A novel robotic articulator that reproduced a six-degree-of-freedom jaw movement was developed and tested. A precise six-axis micro-positioning stage was employed for this articulator. A high-resolution jaw-tracking device measured the functional jaw movement of the patient and a six-axis micro-positioning stage reproduced recorded jaw movement data. A full veneer crown restoration was fabricated with this articulator system. A working cast was mounted on the positioning stage of the articulator. An occlusal table with soft wax was attached on the cast tooth die, and the jaw movements were reproduced to create a functionally generated path on the occlusal table. The finished occlusal record was used to obtain the wax pattern for the crown. In this subject, no intra-oral occlusal adjustment was necessary for setting the finished full veneer crown. Since this articulator could perform a precise reproduction of the dynamic jaw motion during the functional jaw movement, this system has potential to improve accuracy of the prosthetic teeth occlusion.