Designing anterior cantilever resin-bonded fixed dental prostheses based on finite element analysis.

PURPOSE: A resin-bonded bridge (RBB) is a minimally invasive prosthetic treatment option for intact adjacent teeth. However, it is contentious as to whether the mesial or distal adjacent tooth should be used as an abutment. This study aimed to investigate the potential of finite element analysis (FEA) for the selection of abutment teeth and the determination of the optimal design for anterior cantilever RBBs. METHODS: Three types of RBBs were designed to simulate loss of the maxillary left lateral incisor. The fixed-fixed RBB (FF-RBB) had one retainer each for the left central incisor and canine. Distal- and mesial-cantilever RBBs (D-CRBB and M-CRBB) had a single retainer on the central incisor and canine, respectively. Three-dimensional models for FEA were generated from computed tomography slices and dental casts. FEA was performed for each RBB to evaluate stresses in the intercuspal, protrusive, and lateral mandibular positions. RESULTS: The maximum principal stresses on the bridges in the intercuspal position were 141.9 MPa, 93.6 MPa, and 45.7 MPa, for the FF-RBB, D-CRBB, and M-CRBB, respectively. The stress in the D-CRBB position was greater than in the M-CRBB position in the intercuspal, protrusive, and lateral mandibular positions. CONCLUSIONS: Based on the results, M-CRBB on the canine had a higher clinical performance than D-CRBB on the central incisor. FEA was useful for determining the optimal design of RBB for each patient.

Fabrication of mucocompressive splints for free gingival grafts via medical engineering in patients with reconstructed mandibles.

PURPOSE: Acquiring adequate attached mucosa is important in restoring masticatory function with a removable dental prosthesis or dental implant. In patients with inadequate attached mucosa, a free gingival graft (FGG) with a custom stent is used. However, it is challenging to apply the conventional method for fabricating a stent with a reshaped cast in patients with reconstructed mandibles because the reconstructed mandible has limitations due to a titanium mesh, skin flap, and unique bone morphology. In the present report, we have proposed a new design and fabrication process for a mucocompressive splint via medical engineering to acquire the attached mucosa for the prosthodontic treatment of reconstructed mandibles. METHODS: Three-dimensional (3D) craniomandibular models were reconstructed from a computed tomography dataset after mandibular reconstruction. The dentition region was replaced with highly precise scan data of the dental casts using a 3D scanner. The alveolar ridge mucosa and teeth were ideally designed using the 3D model while referring to the anatomical structures. The jig used to fabricate the working dental cast with artificial gum in real space was designed and fabricated using a 3D printer. The alveolar ridge was altered into a simulated configuration on the articulator using a jig. A mucocompressive splint was fabricated on an altered dental cast. The splint was immediately seated on the mandible without any major adjustments after the FGG. CONCLUSION: Adequate attached mucosa for the prosthodontic treatment of a reconstructed mandible was obtained by the pre-surgical fabrication of a mucocompressive splint through medical engineering.

Considerations for the selection of interim restoration materials using wear test results.

PURPOSE: The purpose of this study was to examine the wear of resin materials using two-body wear tests and to verify a selection method for optimal interim restoration materials from findings of a diagnostic occlusal device. METHODS: Specimens were prepared from nine different resins used for diagnostic occlusal devices (soft resin) and interim restorations. Wear tests were conducted using an abrasion testing machine. The resulting wear on resin specimens and antagonist stainless-steel styluses was measured using a laser confocal scanning microscope, and the surface conditions were observed through a scanning electron microscope. The data were analyzed with one-way ANOVA and Tukey's multiple comparison test. The findings of the previous study on diagnostic occlusal devices were referred to in order to verify the selection method of optimal interim restoration materials. RESULTS: The maximum wear depth of the soft resin specimens was significantly greater than that of the other specimens (p<0.05) and was equivalent to the wear depth of a diagnostic occlusal device used for 14 nights. The wear of bis-acryl resin material was shallower than that of the other materials (Polymethyl methacrylate and polyethyl methacrylate), and its antagonist stylus was significantly worn (p<0.05). CONCLUSION: The findings of the previous and present studies showed a relationship among the parameters of Electromyography, wear depth of the diagnostic occlusal device, and wear of materials used for interim restorations. Findings related to bruxism can guide in the selection of interim restoration material and the determination of a suitable duration of wear.

In vitro investigation of human enamel wear by dental porcelain.

BACKGROUND: Ceramic crown that fires the layering porcelain on zirconia corping is starting to be used due to aesthetic requirements. However, many ceramics are used, but wear characteristics are often unknown. OBJECTIVE: This study was performed to investigate the wear of human enamel by porcelains, and to determine the influence of porcelain hardness, surface roughness and crystal of porcelain on the enamel wear. METHODS: Enamel specimens were prepared from extracted human molar teeth. Porcelain specimens were prepared from Deguceram Gold, Vita Omega 900, and Cercon Ceram Kiss. Enamel wear volume was calculated and the porcelain wear depth, surface roughness and Vickers hardness was measured. Moreover, the observation of a crystal by scanning electron microscope and the crystal by X-ray diffraction were identified. RESULTS: Omega 900 showed the smallest enamel wear volume and porcelain wear depth. The Vickers hardnesses of Omega 900 and Cercon Ceram Kiss were almost identical. Leucite was detected from Deguceram Gold and Omega 900, and Silica and Silicon Nitride were detected from Cercon Ceram Kiss. CONCLUSIONS: The enamel wear is influenced not by the hardness of the porcelain but by the surface roughness, the size and shape of the crystal.

Mandibular 3-dimensional finite element analysis for a patient with an aggressive form of craniofacial fibrous dysplasia.

The longitudinal change in mandibular volume and configuration was quantitatively evaluated in a patient with craniofacial fibrous dysplasia (FD). The influence of mechanical stress on the enlargement that is characteristic of FD was verified via finite element analysis (FEA). The patient was a 38-year-old man diagnosed with craniofacial FD in the mandible. He underwent surgical reduction of FD, but the lesion continued to grow and caused facial asymmetry and masticatory disturbance because of missing teeth. An occlusal overlay removable partial denture was constructed for his lower jaw. Computed tomography (CT) images were acquired 4 times in 10 years, and 3-dimensional (3-D) models were reconstructed from these data. The 3-D models were analyzed volumetrically and morphologically and used for FEA. The FD lesion in the mandible enlarged nonuniformly and had site specificity. From the results of FEA, it is suggested that compression stress induced by the occlusal force through the denture may have influenced the direction of enlargement in FD.

Consistency of supplied food and dentition status of the elderly in residential care homes.

BACKGROUND: The association between oral health and malnutrition has been investigated in detail. The nutrition of elderly subjects in residential care homes is determined by caregivers, dietitians or nutritionists and managed by changing the consistency of their supplied food. However, few reports have described the relationship between oral condition and supplied food consistency. The objective of this study was to determine dentition status and care levels that correlate with supplied food consistency among elderly residents of care facilities. In addition, we estimated the care level at which ordinary food consistency can be supplied by caregivers who cannot diagnose dental status. METHOD: Several factors, including dentition, wearing removable dentures, meals categorized as ordinary or processed (sliced, mashed, or liquefied), and care levels according to the Japanese standardized care-needs certification system were investigated in 276 elderly residents (male, n = 56; female, n = 220; mean age, 87.68 ± 5.94 years) of 12 fee-based care facilities. RESULTS: The results of this study showed that care levels were significantly correlated with the consistency of the food supplied to the residents. When supplied food consistency was categorized as ordinary or processed, the number of remaining teeth and the number of tooth contact pairs, either natural or artificial, were statistically significant. From logistic regression analysis, it was determined that the numbers of tooth contact pairs were statistically significant among residents requiring high levels of care. CONCLUSION: The number of tooth contact pairs, either natural or artificial, was one of the contributing factors for deciding supplied food consistency among elderly residents of care facilities. Elderly residents requiring less than care level 3 should have ordinary meals.

Pre-endodontic Post and Core Technique for Endodontic and Prosthodontic Treatment.

INTRODUCTION: Displacement of provisional fixed prostheses may result in undesirable and embarrassing outcomes in dental treatments, especially in endodontic treatment. Development of certain counter measures has been necessary to avoid such discomforts. AIM: The aim of this report was to propose a pre-endodontic post and core technique to achieve smooth progress of the treatment. MATERIALS AND METHODS: The patient was a 59-year-old male diagnosed with an infraocclusion caused by wear of his teeth. He received full mouth provisional fixed restorations for a complete oral rehabilitation. Displacement and fracture of the restorations frequently occurred during the observation period for the function of the restorations. Therefore, the pre-endodontic post and core technique was applied to the abutment teeth before their endodontic treatments were started. The technique consisted of three steps as follows: Step 1: Caries removal and dowel preparation were performed for the abutment teeth having apical periodontitis. Composite cores were indirectly fabricated, which had access holes for endodontic treatment. Step 2: The cores were bonded to the teeth. In endodontic treatment, rubber dam appliances were easily placed owing to the core, and proper tooth isolation was accomplished. Step 3: Fiberposts were bonded to the dowel holes through the access holes after the root canal filling. During endodontic treatment, displacement and/or fracture of the provisional restorations did not occur. CONCLUSION: The pre-endodontic post and core technique was effective in obtaining improved retention of provisional restoration, appropriate isolation for endodontic treatment, and sufficient retention of the post and core. CLINICAL SIGNIFICANCE: The pre-endodontic post and core technique is useful for avoiding the discomforts in dental treatments, namely, a smooth transition from endodontic to prosthodontic treatment can be achieved.

Evaluation of sleep bruxism with a novel designed occlusal splint.

PURPOSE: This report presents our evaluation system that assesses sleep bruxism. The characteristics and fabrication process of our novel designed splint, and the analysis process of our system are presented. METHODS: The subjects were 17 volunteers. The splint was fabricated with a self-curing resin compounded with an amino-acid powder for easy wear on the semi-adjustable articulator, and adjusted for a full-balanced occlusion. An impression of the splint, located on the cast, was taken before and after it was worn. The analytical casts were made and scanned via a dental 3D scanner. The datasets were superimposed using two kinds of regions of interest (palate and occlusal surface). The differences between the two datasets were quantitatively presented with pseudo-color mapping. The maximum differences in coronal and apical directions were calculated on the selected area in the occlusal surface when the occlusal surface was used as a region of interest for registration. The relationship between the EMG activities and the change of occlusal surface of the splint were investigated. RESULTS: In all subjects, deformation and wear facets on the splint were observed. The differences in the apical direction, which indicate wear depth, were correlated with the maximum muscle activity during sleep (p=0.036). CONCLUSION: From our results, it is suggested that we are not able to eliminate the influence of parafunction for the prosthesis only by designing the surface of occlusal splint using the semi-adjustable articulator. Our splint may have the potential to detect specific facets due to parafunctions as nocturnal bruxism.

Clinical Usefulness of Mandibular Reconstruction Using Custom-Made Titanium Mesh Tray and Autogenous Particulate Cancellous Bone and Marrow Harvested From Tibia and/or Ilia.

The objective of this study was to evaluate usefulness of mandibular reconstructions using custom-made titanium mesh (Ti-mesh) tray and particulate cancellous bone and marrow (PCBM). Consecutive 21 patients who underwent mandibular reconstruction were enrolled in this study. They were 13 men and 8 women (mean age, 52.0 years). Virtual reality simulation was performed using computer software based on the preoperative computed tomography data. A 3-dimensional skull model was constructed using 3-dimensional printer. A tray was custom-made from Ti-mesh sheet bent to adapt to the model. After PCBM harvesting from posterior ilia and/or proximal tibia, the tray was fixed to the host bone. New bone formation and configuration of the reconstructed mandible were assessed radiologically. Complications were recorded in each patient during the follow-up period. Patients' satisfaction with postoperative facial contour was evaluated using visual analog scale (VAS score, range, 0-100). In 16 of 21 patients, excellent new bone formation was recognized and expected results were radiologically achieved. In 5 patients, new bone formation was insufficient. Causes of insufficient bone formation included postoperative infection in 2 patients, Ti-mesh tray fracture in 2 patients, and local recurrence of lower gingival cancer in 1 patient. To prevent a tray fracture, a double-layered Ti-mesh tray was useful. Mean VAS score on patients' satisfaction was 77.1. Our results comprehensively suggest that mandibular reconstruction using custom-made Ti-mesh tray and PCBM is clinically useful.

"High-precision, reconstructed 3D model" of skull scanned by conebeam CT: Reproducibility verified using CAD/CAM data.

Computed tomography (CT) scanning has recently been introduced into forensic medicine and dentistry. However, the presence of metal restorations in the dentition can adversely affect the quality of three-dimensional reconstruction from CT scans. In this study, we aimed to evaluate the reproducibility of a "high-precision, reconstructed 3D model" obtained from a conebeam CT scan of dentition, a method that might be particularly helpful in forensic medicine. We took conebeam CT and helical CT images of three dry skulls marked with 47 measuring points; reconstructed three-dimensional images; and measured the distances between the points in the 3D images with a computer-aided design/computer-aided manufacturing (CAD/CAM) marker. We found that in comparison with the helical CT, conebeam CT is capable of reproducing measurements closer to those obtained from the actual samples. In conclusion, our study indicated that the image-reproduction from a conebeam CT scan was more accurate than that from a helical CT scan. Furthermore, the "high-precision reconstructed 3D model" facilitates reliable visualization of full-sized oral and maxillofacial regions in both helical and conebeam CT scans.

Computer assisted mandibular reconstruction using a custom-made titan mesh tray and removable denture based on the top-down treatment technique.

PURPOSE: The purpose of this report is to propose a computer assisted mandibular reconstruction procedure, utilizing a custom-made Ti-mesh tray with particulate cancellous bone and marrow, and a removable denture. This procedure was based on the top-down treatment technique, and reviews the case of a representative patient with mandibular continuity defect. METHODS: The patient was a 74-year old female with a chief complaint of facial asymmetry and masticatory dysfunction. Due to gingival carcinoma, she underwent a segmental mandibulectomy on the left mandibule. On the VR space, using 3-D reconstructed computer tomography data, the residual right-side mandibular fragment was repositioned based on the condylar position and the occlusal relation. The mandibular fragment was then mirrored for a central sagittal plane. The position of the mirrored object was slightly arranged with the occlusal relation. Through the above operations, the landmark configuration, for the custom-made Ti-mesh tray as a virtual simulation model, was fabricated. On the physical model, we produced a custom-made Ti-mesh tray with a commercial Ti-mesh sheet. Surgical treatment was carried out using the tray. The denture pattern was designed by a dental technician on the VR space, fabricated using a 3D printer, and modified to create an impression tray with resin. Using the impression, the temporary removable denture was fabricated. CONCLUSIONS: We propose a computer assisted design for a custom-made Ti-mesh tray and a removable denture, based on the Top-down treatment concept. We feel this technique is advantageous in reconstructing functional occlusion, and in accurately regaining dental and facial esthetics.

Surgical Intervention for Masticatory Muscle Tendon-Aponeurosis Hyperplasia Based on the Diagnosis Using the Four-Dimensional Muscle Model.

OBJECTIVES: The surgical target of Masticatory muscle tendon-aponeurosis hyperplasia (MMTAH) is the masseter or temporal muscle. In our clinic, the 4-dimentional muscle model (4DMM) has been used to decide if we should approach to the masseter or temporal muscle. The aim of this study is validate the clinical usefulness of 4DMM on the basis of the surgical results. METHODS: The 4DMM was constructed from the digital data of 3D-CT and 4-dimentional mandibular movements of the patients. It made us to able to visually observe the expansion rate of masticatory muscles at maximum mouth opening comparing to their length at closed mouth position. Fifteen patients were applied the 4DMM before the surgical treatment and 2 healthy volunteers were enrolled as control group. RESULTS: The expansion rate of temporal muscle at the maximum mouth opening in the patient group was significantly less than that in the control group (P < 0.05). On the other hand, the masseter muscles of all patients were expanded as same as the control group. Therefore the main cause of limitation of mouth-opening was suggested to be a contracture of the temporal muscle. Consequently, we performed successful bilateral coronoidectomy with no surgical intervention to the masseter muscles in all patients. CONCLUSION: The present 4DMM would be valuable modality to decide the target muscle of surgical treatment for patients with MMTAH. In this pathology, contracture of the temporal muscle seems to be main cause of limited mouth opening.

Structural equation modeling for alteration of occlusal plane inclination.

PURPOSE: Occlusal plane inclination is important to maintain a normal opening closing/biting function. However, there can be several causes that lead to alterations of the occlusal plane. The purpose of this study was to observe variations of occlusal plane inclination in adult patients, and to uncover the factors affecting changes in occlusal plane inclination with aging. METHODS: Subjects were 143 patients. A cephalometric image was taken of these patients. In this study, our inquiry points were age, 3 variables on intra-oral findings, and 7 variables on cephalometric analysis. To evaluate the possible causes that affect occlusal plane inclination, factor analysis was carried out, and each component was treated as factors, which were then statistically applied to a structural equation model. Statistical analysis was carried out through the SPSS 20.0 (SPSS Inc., Chicago, USA). RESULTS: In all patients, Camper-occlusal plane angle (COA) ranged from -25.7 to -4.9° (Mean±SD: -6.4±5.36). In the 60 patients who had no missing teeth, COA ranged from -11.6 to -4.9° (Mean±SD: -3.3±3.31). From the results of the structural analysis, it was suggested that the occlusal plane changes to counter-clockwise (on the right lateral cephalograms) with aging. CONCLUSION: In this study, variations of occlusal plane inclination in adult patients were observed, and the factors affecting changes in occlusal plane inclination with aging were investigated via factor analysis. From our results, it was suggested that the mandibular morphology change and loss of teeth with aging influence occlusal plane inclination.

Diagnosis and treatment for obstructive sleep apnea: Fundamental and clinical knowledge in obstructive sleep apnea.

PURPOSE: This review article covers the diagnosis and treatment of obstructive sleep apnea (OSA) from a dental perspective. It addresses the issue of when and how to screen for and then, if indicated, refer the patient for a more comprehensive. STUDY SELECTION: Our focus in this article was on identifying current unanswered questions that relevant to OSA problems that dental scientists have to pursue and on providing valuable information on that problems, consequently the previous studies which investigated or reviewed the diagnosis and treatment of OSA were included. In addition, we included studies on jaw movements during sleep and on the use of a lateral cephalometric film related to the diagnosis and treatment of OSA. RESULTS: The role of portable sleep monitoring devices versus full laboratory polysomnography is discussed. This review also describes what is known about the efficacy of mandibular advancement devices and when and how they fit in to a treatment program for a patient with obstructive sleep apnea. Finally some basic research is presented on jaw movements during sleep and how a lateral cephalometric film can be used to assess the changes of the airway with body posture and head posture. CONCLUSION: This article provides the valuable suggestions for the clinical questions in the diagnosis and treatment of OSA.

Mandibular reconstruction using custom-made titanium mesh tray and particulate cancellous bone and marrow harvested from bilateral posterior ilia.

The objective of this study is to evaluate usefulness of mandibular reconstructions using a custom-made titanium mesh (Ti-mesh) tray and particulate cancellous bone and marrow (PCBM). A consecutive nine patients who underwent mandibular reconstruction were enrolled in this study. They were five men and four women (mean age: 53.9 years). Virtual reality simulation was performed using computer software based on the pre-operative computed tomography data. A 3-dimensional (3-D) skull model was constructed using a 3-D printer. A tray was custom-made from a Ti-mesh sheet bent to adapt to the model. After PCBM harvesting from bilateral posterior ilia, the tray was fixed to the host bone. New bone formation and configuration of the reconstructed mandible were assessed radiologically. Complications were recorded in each patient during the follow-up period. Patients, satisfaction with post-operative facial contour was evaluated using a visual analogue scale (VAS score, range = 0-100). In six of nine patients, excellent new bone formation was recognised and expected results were radiologically achieved. Complications occurred in four patients. These complications included Ti-mesh fracture, Ti-mesh exposure in the oral cavity, and delayed infection. Mean VAS score on patient satisfaction was 77.6. Although the data are preliminary, the results suggest that this method is clinically useful.

Soft palate length and upper airway relationship in OSA and non-OSA subjects.

BACKGROUND: The narrowest area of the airway between the posterior nasal opening and the epiglottis is usually located in the retro palatal area. Many consider this the most likely site of airway obstruction during an obstructive sleep apnea (OSA) event. The aim of this study was to investigate the differences in soft palate and airway length between OSA and non-OSA patients. METHODS: In this study, we analyzed the ratio of the soft palate and the upper airway length in 45 consecutive patients. Twenty-five had an Apnea-Hypoapnea Index of more than 5 events per hour and were classified in the OSA group (male, 19; female, 6). These patients were compared with 20 normal controls (male, 12; female, 8). Controls who complained of snoring did have sleep studies (n = 5). The other fifteen controls were clinically asymptomatic and did not have sleep studies. Medical computed tomography scans were taken to determine the length of the upper airway and the soft palate length measured in the midsagittal image. RESULTS: Soft palate length was significantly larger in OSA patients compared to controls (p = 0.009), and in men compared to women (p = 0.002). However, there were no differences in airway length. The soft palate length, as a percent of oropharyngeal airway length, was significantly larger in OSA patients compared to controls (p = < 0.0001) and in men compared to women (p = 0.02). Soft palate length increases significantly with age by 0.3 mm per year in males (after adjustment for body mass index (BMI) and OSA). Soft palate length as a percent of airway length is larger in OSA patients and increases significantly with BMI in males only after adjusting for age. CONCLUSION: In this study, OSA patients had a longer soft palate in proportion to their oropharyngeal airway compared to controls as well as men compared to women. This proportion could be used for identifying patients at risk for OSA in combination with age.

Application of photogrammetry for analysis of occlusal contacts.

INTRODUCTION: The conventional 2D-analysis methods for occlusal contacts provided limited information on tooth morphology. This present study aims to detect 3D positional information of occlusal contacts from 2D-photos via photogrammetry. We propose an image processing solution for analysis of occlusal contacts and facets via the black silicone method and a photogrammetric technique. MATERIALS AND METHODS: The occlusal facets were reconstructed from a 2D-photograph data-set of inter-occlusal records into a 3D image via photogrammetry. The configuration of the occlusal surface was reproduced with polygons. In addition, the textures of the occlusal contacts were mapped to each polygon. DIFFERENCE FROM CONVENTIONAL METHODS: Constructing occlusal facets with 3D polygons from 2D-photos with photogrammetry was a defining characteristic of this image processing technique. It allowed us to better observe findings of the black silicone method. Compared with conventional 3D analysis using a 3D scanner, our 3D models did not reproduce the detail of the anatomical configuration. However, by merging the findings of the inter-occlusal record, the deformation of mandible and the displacement of periodontal ligaments under occlusal force were reflected in our model. EFFECT OR PERFORMANCE: Through the use of polygons in the conversion of 2D images to 3D images, we were able to define the relation between the location and direction of the occlusal contacts and facets, which was difficult to detect via conventional methods. CONCLUSION: Through our method of making a 3D polygon model, the findings of inter-occlusal records which reflected the jaw/teeth behavior under occlusal force could be observed 3-dimensionally.

Influence of filler on bite impression material in transillumination method for occlusal examination.

The purpose of this present study was to investigate the influence of material filler and RGB values' fluctuation on creating a calibration curve, which indicates the relationship between material thickness and transmitted light brightness using the transillumination method. Creating the calibration curves were carried out through the following three methods; 1) the conventional method creates the calibration curve with a formula of thickness, 2) the maximum value method, with samples of a specified thickness, and 3) the actual value method, with a microscope. Furthermore, the reliability of each curve was verified via scanned artificial tooth data. In addition, the characteristics of light decrement were investigated. From our results, it was suggested that the filler diameter must be considered when the calibration curve is created using the bite impression material with a filler. In addition, it was suggested that the RGB values' fluctuation did not influence the calibration curve.

Comparison of cone-beam computed tomography incidental findings between patients with moderate/severe obstructive sleep apnea and mild obstructive sleep apnea/healthy patients.

OBJECTIVE: The objective of this study was to compare the incidental radiographic findings in the maxillofacial structures and the pharyngeal airway between subjects with moderate/severe obstructive sleep apnea (OSA) and mild OSA/healthy subjects using cone-beam computed tomography (CBCT) scans. STUDY DESIGN: A total of 53 subjects with moderate/severe OSA (with a Respiratory Disturbance Index [RDI] ≥ 15 events/h) and 33 mild OSA/healthy subjects (RDI < 15), based on ambulatory somnographic assessment, were recruited. Supine CBCTs were taken and sent for radiological report. The incidental findings were compared between the 2 groups. RESULTS: Moderate/severe subjects had larger prevalence of conchae bullosa, hypertrophic turbinates, hypertrophic tonsils, elongated or posteriorly placed soft palate, narrower airway, enlarged tongue, and focal calcifications, although no significant differences were found. CONCLUSIONS: CBCT is useful in identifying maxillofacial and airway anomalies that could interfere with normal breathing; however, no significant difference was found in prevalence of incidental findings between subjects with moderate/severe OSA and mild OSA/healthy subjects. Further studies are necessary to generalize our results.

Design for functional occlusal surface of CAD/CAM crown using VR articulator.

In this present study, we introduce an approach that utilizes the VR articulator to mimic lateral excursions and design a functional occlusal surface. We then take the resultant occlusal surface from this approach and compare it with a conventional method. As a result, we developed a novel CAD/CAM system which can render a functional occlusal surface, via a VR articulator. The marginal fit and occlusion in our CAD/CAM crown was sufficient to apply to the clinic.