RESUMO
Application of sewage sludge as fertilizer can be beneficial for sustainable agriculture as it could largely account for nitrogen and phosphorus demand for crops and has lower costs compared to other disposal routes, e.g., incineration, and sanitary landfills. This study evaluates the feasibility of pilot-scale pelletization of sewage sludge for non-food crops (e.g., ornamental plants). The co-pelletization method was designed by mixing sewage sludge and binder (tapioca starch) at a 9:1 sludge-to-starch weight ratio. The amount of nitrogen (N), phosphorus (P), and potassium (K) of the resultant pellets were determined at 5.7%, 4.9%, and 0.2%, respectively. Following Malaysian and US Standards, non-essential elements and pathogenicity of the pelletized sewage sludge were measured below the predetermined limits and hence safe for agricultural application. The planting trial using 50% inorganic fertilizer + 50% sewage sludge pellets exhibited a promising result on the growth of the flowering plant Celosia plumosa, with having better dimension and color, 20% higher in height, 4% more chlorophyll content, 54% more leaf, 43% greater stem growth, and 27% more flowers compared to control. Likewise, the planting trial on Tagetes erecta resulted in 10.5% wider leaf, 10.6% heavier leaf dry weight, and 12.5% more chlorophyll content compared to control with full usage of inorganic fertilizer. By considering liquidities to operate the production facility, the economic analysis estimated that the production cost per ton of pelletized sewage sludge produced was USD 0.98.
Assuntos
Agricultura , Fertilizantes , Nitrogênio , Fósforo , Esgotos , Fósforo/análise , Nitrogênio/análise , Agricultura/métodos , Produtos Agrícolas , Nutrientes/análise , Potássio/análise , Eliminação de Resíduos Líquidos/métodos , Projetos Piloto , Malásia , ManihotRESUMO
Microbial degradation of organic matters is crucial during the composting process. In this study, the enhancement of the composting of rice straw and chicken manure with biochar was evaluated by investigating the indigenous cellulolytic bacterial community structure during the composting process. Compared with control treatment, composting with biochar recorded higher temperature (74 °C), longer thermophilic phase (> 50 °C for 18 days) and reduced carbon (19%) with considerable micro- and macronutrients content. The bacterial community succession showed that composting with biochar was dominated by the cellulolytic Thermobifida and Nocardiopsis genera, which play an important role in lignocellulose degradation. Twenty-three cellulolytic bacterial strains were successfully isolated at different phases of the composting with biochar. The 16S rRNA gene sequencing similarity showed that they were related to Bacillus licheniformis, Bacillus subtilis, Bacillus aerius, and Bacillus haynesii, which were known as cellulolytic bacteria and generally involved in lignocellulose degradation. Of these isolated bacteria, Bacillus licheniformis, a facultative anaerobe, was the major bacterial strain isolated and demonstrated higher cellulase activities. The increase in temperature and reduction of carbon during the composting with biochar in this study can thus be attributed to the existence of these cellulolytic bacteria identified.
Assuntos
Compostagem , Oryza , Anaerobiose , Animais , Bactérias/genética , Carbono , Carvão Vegetal , Galinhas/genética , Esterco/microbiologia , Oryza/genética , RNA Ribossômico 16S/genética , SoloRESUMO
Palm oil is a representative and important biomass, not only as the most edible vegetable oil consumed worldwide, but also as a material for chemicals and biofuels. Despite the potential sustainability of the palm oil industry, it has conventionally emitted excess greenhouse gases, waste materials, and wastewater, brought land use change, thus affecting the natural environment. Therefore, the successful development of a sustainable palm oil industry is a touchstone for promoting the bioeconomy. Here, we first review the concept of the bioeconomy and the positive and negative aspects of the palm oil industry. Then, we consider solutions for introducing a green economy into the palm oil industry, such that it may coexist with biodiversity and environmental conservation toward the Sustainable Development Goals.
Assuntos
Biodiversidade , Conservação de Recursos Energéticos , Biocombustíveis , Biomassa , Conservação dos Recursos Naturais , Óleo de PalmeiraRESUMO
The influence of biomass cellulosic content on biochar nanopore structure and adsorption capacity in aqueous phase was scarcely reported. Commercial cellulose (100% cellulose), oil palm frond (39.5% cellulose), and palm kernel shell (20.5% cellulose) were pyrolyzed AT 630 °C, characterized and tested for the adsorption of iodine and organic contaminants. The external surface area and average pore size increased with cellulosic content, where commercial cellulose formed biochar with external surface area of 95.4 m2/g and average pore size of 4.1 nm. The biochar from commercial cellulose had the largest adsorption capacities: 371.40 mg/g for iodine, 86.7 mg/L for tannic acid, 17.89 mg/g for COD and 60.35 mg/g for colour, while biochar from palm kernel shell had the least adsorption capacities. The cellulosic content reflected the differences in biochar nanopore structure and adsorption capacities, signifying the suitability of highly cellulosic biomass for producing biochar to effectively treat wastewater.
Assuntos
Nanoporos , Adsorção , Biomassa , Carvão VegetalRESUMO
Most palm oil mills adopted conventional ponding system, including anaerobic, aerobic, facultative and algae ponds, for the treatment of palm oil mill effluent (POME). Only a few mills installed a bio-polishing plant to treat POME further before its final discharge. The present study aims to determine the quality and toxicity levels of POME final discharge from three different mills by using conventional chemical analyses and fish (Danio rerio) embryo toxicity (FET) test. The effluent derived from mill A which installed with a bio-polishing plant had lower values of BOD, COD and TSS at 45 mg/L, 104 mg/L, and 27 mg/L, respectively. Only mill A nearly met the industrial effluent discharge standard for BOD. In FET test, effluent from mill A recorded low lethality and most of the embryos were malformed after hatching (half-maximal effective concentration (EC50) = 20%). The highest toxicity was observed from the effluent of mill B and all embryos were coagulated after 24 h in samples greater than 75% of effluent (38% of half-maximal lethal concentration (LC50) at 96 h). The embryos in the effluent from mill C recorded high mortality after hatching, and the survivors were malformed after 96 h exposure (LC50 = 26%). Elemental analysis of POME final discharge samples showed Cu, Zn, and Fe concentrations were in the range of 0.10-0.32 mg/L, 0.01-0.99 mg/L, and 0.94-4.54 mg/L, respectively and all values were below the effluent permissible discharge limits. However, the present study found these metals inhibited D. rerio embryonic development at 0.12 mg/L of Cu, and 4.9 mg/L of Fe for 96 h-EC50. The present study found that bio-polishing plant installed in mill A effectively removing pollutants especially BOD and the FET test was a useful method to monitor quality and toxicity of the POME final discharge samples.
Assuntos
Eliminação de Resíduos Líquidos , Peixe-Zebra , Animais , Resíduos Industriais/análise , Óleo de Palmeira , Óleos de Plantas/toxicidadeRESUMO
In order to meet the growing demand for adsorbents to treat wastewater effectively, there has been increased interest in using sustainable biomass feedstocks. In this present study, the dermal tissue of oil palm frond was pyrolyzed with superheated steam at 500 °C to produce nanoporous biochar as bioadsorbent. The effect of operating conditions was investigated to understand the adsorption mechanism and to enhance the adsorption of phenol and tannic acid. The biochar had a microporous structure with a Brunauer-Emmett-Teller surface area of 422 m2/g containing low polar groups. The adsorption capacity of 62.89 mg/g for phenol and 67.41 mg/g for tannic acid were obtained using 3 g/L biochar dosage after 8 h of treatment at solution pH of 6.5 and temperature of 45 °C. The Freundlich model had the best fit to the isotherm data of phenol (R2 of 0.9863), while the Langmuir model best elucidated the isotherm data of tannic acid (R2 of 0.9632). These indicated that the biochar-phenol interface was associated with a heterogeneous multilayer sorption mechanism, while the biochar-tannic acid interface had a nonspecific monolayer sorption mechanism. The residual concentration of 26.3 mg/L phenol and 23.1 mg/L tannic acid was achieved when treated from 260 mg/L three times consecutively with 1 g/L biochar dosage, compared to a reduction to 72.3 mg/L phenol and 69.9 mg/L tannic acid using 3 g/L biochar dosage in a single treatment. The biochar exhibited effective adsorption of phenol and tannic acid, making it possible to treat effluents that contain varieties of phenolic compounds.
Assuntos
Pirólise , Poluentes Químicos da Água , Adsorção , Carvão Vegetal , Cinética , Fenol/análise , Fenóis/análise , Vapor , Taninos , Poluentes Químicos da Água/análiseRESUMO
Palm oil mill effluent (POME) contains complex and highly biodegradable organic matters so discharging it without appropriate treatment may lead to environmental problems. POME final discharge quality is normally determined based on conventional chemical detection such as by biological oxygen demand (BOD) and chemical oxygen demand (COD). The novelty of the present study is that the toxicity effects of the POME final discharge samples were evaluated based on whole effluent toxicity (WET) and toxicity identification evaluation (TIE) tests using Daphnia magna. The toxicity unit (TU) values were recorded to be in the range from TU = 1.1-11 obtained from WET, and the TIE manipulation tests suggested that a substantial amount of toxic compounds was contained in the POME final discharge. Phenol, 2,6-bis (1,1-dimethylethyl)- and heavy metals such as Cu and Zn were detected in all the effluents and were recognized as being the main toxicants in the POME final discharge. GC/MS analyses also successfully identified cyclic volatile methyl siloxanes; cyclotetrasiloxane, octamethyl- (D4), cyclopentasiloxane, decamethyl- (D5), cyclohexasiloxane, dodecamethyl- (D6). D4 was detected at 0.0148-0.0357 mg/L, which could be potentially toxic. The palm oil industry used only water in the form of steam to process the fruits, and the presence of these compounds might be derived from the detergents and grease used in palm oil mill cleaning and maintenance operations. An appropriate treatment process is thus required to eliminate these toxicants from the POME final discharge. It is recommended that two approaches, chemical-based monitoring as well as biological toxicity-based monitoring, should be utilized for achieving an acceptable quality of POME final discharge in the future.
Assuntos
Daphnia , Plâncton , Animais , Resíduos Industriais , Óleo de Palmeira , Eliminação de Resíduos LíquidosRESUMO
An amendment to this paper has been published and can be accessed via a link at the top of the paper.
RESUMO
A thermophilic Thermobifida fusca strain UPMC 901, harboring highly thermostable cellulolytic activity, was successfully isolated from oil palm empty fruit bunch compost. Its endoglucanase had the highest activity at 24 hours of incubation in carboxymethyl-cellulose (CMC) and filter paper. A maximum endoglucanase activity of 0.9 U/mL was achieved at pH 5 and 60 °C using CMC as a carbon source. The endoglucanase properties were further characterized using crude enzyme preparations from the culture supernatant. Thermal stability indicated that the endoglucanase activity was highly stable at 70 °C for 24 hours. Furthermore, the activity was found to be completely maintained without any loss at 50 °C and 60 °C for 144 hours, making it the most stable than other endoglucanases reported in the literature. The high stability of the endoglucanase at an elevated temperature for a prolonged period of time makes it a suitable candidate for the biorefinery application.
Assuntos
Actinobacteria/enzimologia , Celulase/isolamento & purificação , Celulase/metabolismo , Actinobacteria/metabolismo , Proteínas de Bactérias/isolamento & purificação , Proteínas de Bactérias/metabolismo , Carboximetilcelulose Sódica , Celulose , Estabilidade Enzimática/fisiologia , Concentração de Íons de Hidrogênio , Óleo de Palmeira , Temperatura , ThermobifidaRESUMO
Oil palm biomass is widely known for its potential as a renewable resource for various value-added products due to its lignocellulosic content and availability. Oil palm biomass biorefinery is an industry that comes with sociopolitical benefits through job opportunities, as well as potential environmental benefits. Many studies have been conducted on the technological advancements of oil-palm biomass-derived renewable materials, which are discussed comprehensively in this review. Recent technological developments have made it possible to bring new and innovative technologies to commercialization, such as compost, biocharcoal, biocomposites, and bioplastics.
Assuntos
Arecaceae , Biomassa , Biotecnologia/métodos , Óleo de PalmeiraRESUMO
Despite efforts to address the composition of the microbial community during the anaerobic treatment of palm oil mill effluent (POME), its composition in relation to biodegradation in the full-scale treatment system has not yet been extensively examined. Therefore, a thorough analysis of bacterial and archaeal communities was performed in the present study using MiSeq sequencing at the different stages of the POME treatment, which comprised anaerobic as well as facultative anaerobic and aerobic processes, including the mixed raw effluent (MRE), mixing pond, holding tank, and final discharge phases. Based on the results obtained, the following biodegradation processes were suggested to occur at the different treatment stages: (1) Lactobacillaceae (35.9%) dominated the first stage, which contributed to high lactic acid production; (2) the higher population of Clostridiaceae in the mixing pond (47.7%) and Prevotellaceae in the holding tank (49.7%) promoted acetic acid production; (3) the aceticlastic methanogen Methanosaetaceae (0.6-0.8%) played a role in acetic acid degradation in the open digester and closed reactor for methane generation; (4) Syntrophomonas (21.5-29.2%) appeared to be involved in the degradation of fatty acids and acetic acid by syntrophic cooperation with the hydrogenotrophic methanogen, Methanobacteriaceae (0.6-1.3%); and (5) the phenols and alcohols detected in the early phases, but not in the final discharge phase, indicated the successful degradation of lignocellulosic materials. The present results contribute to a better understanding of the biodegradation mechanisms involved in the different stages of the full-scale treatment of POME.
Assuntos
Biodegradação Ambiental , Consórcios Microbianos , Óleo de Palmeira/metabolismo , Esgotos/microbiologia , Eliminação de Resíduos Líquidos , Aerobiose , Anaerobiose , Archaea/classificação , Archaea/isolamento & purificação , Archaea/metabolismo , Bactérias/classificação , Bactérias/isolamento & purificação , Bactérias/metabolismo , Biodiversidade , Reatores Biológicos/microbiologia , Lignina/metabolismo , Metano/biossínteseRESUMO
A one-step self-sustained carbonization of coconut shell biomass, carried out in a brick reactor at a relatively low temperature of 300-500°C, successfully produced a biochar-derived adsorbent with 308 m2/g surface area, 2 nm pore diameter, and 0.15 cm3/g total pore volume. The coconut shell biochar qualifies as a nano-adsorbent, supported by scanning electron microscope images, which showed well-developed nano-pores on the surface of the biochar structure, even though there was no separate activation process. This is the first report whereby coconut shell can be converted to biochar-derived nano-adsorbent at a low carbonization temperature, without the need of the activation process. This is superior to previous reports on biochar produced from oil palm empty fruit bunch.
Assuntos
Carvão Vegetal , Cocos , Biomassa , TemperaturaRESUMO
Efficient approaches for the utilization of waste sewage sludge have been widely studied. One of them is to use it for the bioenergy production, specifically methane gas which is well-known to be driven by complex bacterial interactions during the anaerobic digestion process. Therefore, it is important to understand not only microorganisms for producing methane but also those for controlling or regulating the process. In this study, azithromycin analogs belonging to macrolide, ketolide, and lincosamide groups were applied to investigate the mechanisms and dynamics of bacterial community in waste sewage sludge for methane production. The stages of anaerobic digestion process were evaluated by measuring the production of intermediate substrates, such as protease activity, organic acids, the quantification of bacteria and archaea, and its community dynamics. All azithromycin analogs used in this study achieved a high methane production compared to the control sample without any antibiotic due to the efficient hydrolysis process and the presence of important fermentative bacteria and archaea responsible in the methanogenesis stage. The key microorganisms contributing to the methane production may be Clostridia, Cladilinea, Planctomycetes, and Alphaproteobacteria as an accelerator whereas Nitrosomonadaceae and Nitrospiraceae may be suppressors for methane production. In conclusion, the utilization of antibiotic analogs of macrolide, ketolide, and lincosamide groups has a promising ability in finding the essential microorganisms and improving the methane production using waste sewage sludge.
Assuntos
Reatores Biológicos/microbiologia , Metano/biossíntese , Esgotos/microbiologia , Anaerobiose , Antibacterianos/farmacologia , Archaea/efeitos dos fármacos , Bactérias/efeitos dos fármacos , Microbiologia IndustrialRESUMO
This work tackles the disadvantages in the production of functionalized nanofibers from biomass and offers a new methodology to nanofiber-reinforced composite manufacturing. A vapor-phase-assisted surface polymerization (VASP) method has been used to develop surface-modified lignocellulosic nanofibers. Through the vaporized monomers during polymerization, the polymer chains can be introduced deep within oil palm mesocarp fibers (OPMFs) due to their unique porous structure. After OPMFs are modified with polymer chains, the simple Mortar grinder mill-ionic liquid (M-IL) method provides fibrillation from the macro- to nanoscale, retaining the grafted polymer chains. This approach for the functionalization of biomass could lead to the large-scale fabrication of surface-modified nanofibers for reinforced materials and promote innovative implementations of the renewable biomass resource.
RESUMO
A recently developed rapid co-composting of oil palm empty fruit bunch (OPEFB) and palm oil mill effluent (POME) anaerobic sludge is beginning to attract attention from the palm oil industry in managing the disposal of these wastes. However, a deeper understanding of microbial diversity is required for the sustainable practice of the co-compositing process. In this study, an in-depth assessment of bacterial community succession at different stages of the pilot scale co-composting of OPEFB-POME anaerobic sludge was performed using 454-pyrosequencing, which was then correlated with the changes of physicochemical properties including temperature, oxygen level and moisture content. Approximately 58,122 of 16S rRNA gene amplicons with more than 500 operational taxonomy units (OTUs) were obtained. Alpha diversity and principal component analysis (PCoA) indicated that bacterial diversity and distributions were most influenced by the physicochemical properties of the co-composting stages, which showed remarkable shifts of dominant species throughout the process. Species related to Devosia yakushimensis and Desemzia incerta are shown to emerge as dominant bacteria in the thermophilic stage, while Planococcus rifietoensis correlated best with the later stage of co-composting. This study proved the bacterial community shifts in the co-composting stages corresponded with the changes of the physicochemical properties, and may, therefore, be useful in monitoring the progress of co-composting and compost maturity.
Assuntos
Bactérias/classificação , Compostagem/métodos , Resíduos Industriais , Óleo de Palmeira , Esgotos/microbiologia , Bactérias/genética , Bactérias/isolamento & purificação , Biodiversidade , Frutas/química , RNA Ribossômico 16S/genéticaRESUMO
In this study, novel eco-friendly blends based on environmental-friendly polymers and compatibilizers, such as poly(ϵ-caprolactone) (PCL), cis-1,4-polyisoprene (PI), soybean lecithin (SOLE) and acrylated-epoxidized soybean oil (AESO), have been prepared in order to suggest a biodegradable joining tool used for plant grafting in agriculture, which will be competitive from the environment and economic points of view against conventional nonbiodegradable tools. PCL/PI blends, in which the portion of PCL was 75 and 50, were mixed with a compatibilizer by a melt-blending technique. The resulting blends were investigated by thermogravimetric analysis, differential scanning calorimetry and scanning electron microscopy and also their mechanical properties were determined. Afterwards, the blend films were buried in the soil. Remarkable level of weight loss was achieved in 6 weeks, â¼46%. The results showed that the addition of SOLE helped to improve the compatibility between PCL and PI due to its amphipathic property, and, besides, accelerated the weight loss of the films in soil, increasing microorganism growth on the film.
Assuntos
Materiais Biocompatíveis , Polímeros , Varredura Diferencial de Calorimetria , Microscopia Eletrônica de Varredura , Poliésteres , SoloRESUMO
Anaerobic digestion is an effective method for reducing the by-product of waste-activated sludge (WAS) from wastewater treatment plants and for producing bioenergy from WAS. However, only a limited number of studies have attempted to improve anaerobic digestion by targeting the microbial interactions in WAS. In this study, we examined whether different antibiotics positively, negatively, or neutrally influence methane fermentation by evaluating changes in the microbial community and functions in WAS. Addition of azithromycin promoted the microbial communities related to the acidogenic and acetogenic stages, and a high concentration of soluble proteins and a high activity of methanogens were detected. Chloramphenicol inhibited methane production but did not affect the bacteria that contribute to the hydrolysis, acidogenesis, and acetogenesis digestion stages. The addition of kanamycin, which exhibits the same methane productivity as a control (antibiotic-free WAS), did not affect all of the microbial communities during anaerobic digestion. This study demonstrates the simultaneous functions and interactions of diverse bacteria and methanogenic Archaea in different stages of the anaerobic digestion of WAS. The ratio of Caldilinea, Methanosarcina, and Clostridium may correspond closely to the trend of methane production in each antibiotic. The changes in microbial activities and function by antibiotics facilitate a better understanding of bioenergy production.
Assuntos
Antibacterianos/metabolismo , Bactérias/classificação , Bactérias/efeitos dos fármacos , Biota/efeitos dos fármacos , Metano/metabolismo , Esgotos/microbiologia , Anaerobiose , Archaea/classificação , Azitromicina/metabolismo , Cloranfenicol/metabolismo , Canamicina/metabolismoRESUMO
An appropriate technology for waste utilisation, especially for a large amount of abundant pressed-shredded oil palm empty fruit bunch (OFEFB), is important for the oil palm industry. Self-sustained pyrolysis, whereby oil palm biomass was combusted by itself to provide the heat for pyrolysis without an electrical heater, is more preferable owing to its simplicity, ease of operation and low energy requirement. In this study, biochar production under self-sustained pyrolysis of oil palm biomass in the form of oil palm empty fruit bunch was tested in a 3-t large-scale pool-type reactor. During the pyrolysis process, the biomass was loaded layer by layer when the smoke appeared on the top, to minimise the entrance of oxygen. This method had significantly increased the yield of biochar. In our previous report, we have tested on a 30-kg pilot-scale capacity under self-sustained pyrolysis and found that the higher heating value (HHV) obtained was 22.6-24.7 MJ kg(-1) with a 23.5%-25.0% yield. In this scaled-up study, a 3-t large-scale procedure produced HHV of 22.0-24.3 MJ kg(-1) with a 30%-34% yield based on a wet-weight basis. The maximum self-sustained pyrolysis temperature for the large-scale procedure can reach between 600 °C and 700 °C. We concluded that large-scale biochar production under self-sustained pyrolysis was successfully conducted owing to the comparable biochar produced, compared with medium-scale and other studies with an electrical heating element, making it an appropriate technology for waste utilisation, particularly for the oil palm industry.
Assuntos
Arecaceae/química , Biomassa , Carvão Vegetal/análise , Incineração/métodos , Temperatura AltaRESUMO
This study adopts the pyrosequencing technique to identify bacteria present on 26 kitchen cutting boards collected from different grades of food premises around Seri Kembangan, a city in Malaysia. Pyrosequencing generated 452,401 of total reads of OTUs with an average of 1.4×10(7) bacterial cells/cm(2). Proteobacteria, Firmicutes and Bacteroides were identified as the most abundant phyla in the samples. Taxonomic richness was generally high with >1000 operational taxonomic units (OTUs) observed across all samples. The highest appearance frequencies (100%) were OTUs closely related to Enterobacter sp., Enterobacter aerogenes, Pseudomonas sp. and Pseudomonas putida. Several OTUs were identified most closely related to known food-borne pathogens, including Bacillus cereus, Cronobacter sakazaki, Cronobacter turisensis, Escherichia coli, E. coli O157:H7, Hafnia alvei, Kurthia gibsonii, Salmonella bongori, Salmonella enterica, Salmonella paratyphi, Salmonella tyhpi, Salmonella typhimurium and Yersinia enterocolitica ranging from 0.005% to 0.68% relative abundance. The condition and grade of the food premises on a three point cleanliness scale did not correlate with the bacterial abundance and type. Regardless of the status and grades, all food premises have the same likelihood to introduce food-borne bacteria from cutting boards to their foods and must always prioritize the correct food handling procedure in order to avoid unwanted outbreak of food-borne illnesses.
Assuntos
Bactérias/genética , Bactérias/isolamento & purificação , Manipulação de Alimentos/instrumentação , Microbiologia de Alimentos , Restaurantes/normas , Bactérias/classificação , Biodiversidade , Doenças Transmitidas por Alimentos/prevenção & controle , MalásiaRESUMO
Oil palm frond (OPF) juice is a potential industrial fermentation substrate as it has high sugars content and the OPF are readily available daily. However, maximum sugars yield and storage stability of the OPF juice are yet to be determined. This study was conducted to determine the effect of physical pretreatment and storage duration of OPF petiole on sugars yield. Storage stability of OPF juice at different storing conditions was also investigated. It was found that OPF petiole squeezed by hydraulic pressing machine gave the highest sugars recovery at almost 40 g/kg, accounting for a recovery yield of 88%. Storage of OPF petiole up to 72 hrs prior to squeezing reduced the free sugars by 11 g/kg. Concentrated OPF juice with 95% water removal had the best storage stability at both 4 and 30°C, when it was stored for 10 days. Moreover, concentrated OPF syrup prepared by thermal processing did not give any Maillard effect on microbial growth. Based on our results, OPF juice meets all the criteria as a good fermentation substrate as it is renewable, consistently available, and easy to be obtained, it does not inhibit microbial growth and product formation, and it contains no impurities.