Effect of 125 Hz and 150 Hz vibrational frequency electric toothbrushes on the rate of orthodontic tooth movement and prostaglandin E2 levels.

Objective: To evaluate the effects of an electric toothbrush with vibrational frequencies of 125 Hz and 150 Hz on the orthodontic tooth movement (OTM) rate and the production of prostaglandin E2 (PGE2). Methods: Out of thirty patients (aged 18-25 years; 16 females and 14 males), ten patients each formed Group A and B, who used electric toothbrushes with 125 Hz and 150 Hz vibrations, respectively. The remaining ten patients (Group C) served as the control group and did not use electric toothbrushes. The rate of OTM and levels of PGE2 using microcapillary pipettes were calculated before the start of retraction (T0), on the 30th day (T1), on the 60th day (T2), and on the 90th day (T3) from the start of retraction in all the groups. Results: There was a statistically significant difference in the mean OTM values and PGE2 levels in all three groups at different time intervals, with the maximum difference seen in Group B compared to Group A and least in Group C at T1, T2 and T3. Conclusions: The rate of OTM and levels of PGE2 were highest in patients who used an electric toothbrush with 150 Hz mechanical vibration compared to those who used an electric toothbrush with 125 Hz mechanical vibration and least in patients who did not use an electric toothbrush. Mechanical vibration led to an increase in the PGE2 levels and accelerated the OTM.

Effectiveness of amine fluoride mouthwash in preventing white spot lesions during fixed orthodontic therapy - A randomized control trial.

Background and Aim: One of the main reasons that patients seek orthodontic treatment is aesthetics. Unfortunately, treatment with fixed orthodontic appliances can at times increase the chances of developing white spot lesions on the surfaces of teeth, thus creating a new aesthetic issue for the patient. The prevalence of white spot lesions (WSL) reported after treatment varies from 2% to 97%, and these lesions can occur despite increased attention to hygiene. Hence the aim of this study was to assess the effect of Amine fluoride mouthwash in preventing white spot lesions during fixed orthodontic therapy. Materials and Methods: Study participants were randomly divided into two groups (Group A - experimental 25 patients and Group B - control 25 patients). The pre-intervention and post-intervention intra-oral digital photographs were analysed by using ImageJ software to assess the percentage of the facial surface affected on the teeth (10 maxillary teeth), which had white spot lesions. Results: The mean value of WSLs showed significant difference between the experimental and control groups. Mean values of WSL in the experimental group decreased from 2 to 1.54 with a mean difference of 0.46 after 6 months of follow-up which indicated that amine fluoride mouthwash was effective in preventing WSLs during fixed orthodontic treatment. Conclusion: WSLs scores were significantly reduced in patients who received the mouthwash when compared to patients who followed standard oral hygiene regimen with fluoridated toothpaste only. In clinical practice, amine fluoride mouthwash is an effective method for the prevention of WSLs during fixed orthodontic treatment.

Comparison of the effectiveness of butterfly arch versus transpalatal arch in anchorage reinforcement: A linear 3D finite element study.

Background. Although there are various intraoral and extraoral appliances for anchorage management in orthodontics, most fail to preserve the anchorage efficiently. Thus, there is a need for an appliance that can preserve anchorage in the sagittal, vertical, and transverse directions with good patience compliance and cost-effectiveness. This study compared the efficacy of butterfly arch and transpalatal arch (TPA) as an anchorage reinforcing unit during orthodontic space closure using a linear finite element model. Methods. A 3D model of the maxilla and associated structures was developed from CT images of an individual's skull at a slice thickness of 1 mm. The magnitude of movements of anchor teeth in vertical, horizontal, and transverse directions was calculated in first premolar extraction cases during anterior retraction using a linear finite element model analysis and compared in two situations-butterfly arch and TPA attached to maxillary first molar for anchorage. Results. The anterior teeth had similar movements in the case of TPA and butterfly arch. There was more mesial and lingual movement in the first molars with TPA than in the butterfly arch, which had buccal but no mesial movement. The anterior teeth showed extrusion and the second premolars showed intrusion with TPA. Also, the von Mises stress and maximum principal stress were maximum with TPA at the cervical region of anterior and posterior teeth compared to the butterfly arch, where both stresses were uniformly distributed all over the teeth. Conclusion. A butterfly arch with its unique design, configuration, and biomechanical properties can be used as a device that can maintain the posterior anchorage efficiently.

Comparison of mandibular buccal shelf bone characteristics between two facial types using cone beam computed tomography.

Background: Mandibular buccal shelf (MBS) offers good quality and quantity of bone for orthodontic bone screw (OBS) insertion. Despite several reports of treated patients, there are numerous variables in selecting the exact placement site for OBS placement in the MBS. There are also anatomical variations in this area which must be considered. Objectives: This study aims to measure and compare the MBS bone characteristics for OBS placement using cone beam computed tomography (CBCT) between two different facial types. Materials and Methods: Eighty CBCT samples were collected (40 samples of group A horizontal growers and 40 of group B vertical growers). Each CBCT image was reconstructed and oriented with CS 3D CBCT software. The cortical bone thickness, the slope of the MBS, and buccolingual inclination of mandibular second molar were measured and analysed. Result: Cortical bone thickness among horizontal growers was 5.23 ± 0.58 mm and among vertical growers was 4.85 ± 0.37 mm. The slope of MBS among horizontal growers was 60.83 ± 6.15 degrees and among vertical growers was 66.75 ± 6.27 degrees. In both the parameters there was a statistically significant difference between the groups. There was no significant difference between the groups for the buccolingual inclination of 2nd molar. Conclusion: Increased cortical bone thickness and the flatter slope of MBS at the 2nd molar region allows for easier placement of OBS in horizontal growers than in vertical growers.

Effect of 125-150 Hz Vibrational Frequency Electric Toothbrush on Teeth and Supporting Structures: A Finite Element Method Study.

AIM AND OBJECTIVE: The aim of this finite element method (FEM) study was to assess the safety of 125-150 Hz vibrational frequency electric toothbrush on teeth and associated structures. MATERIALS AND METHODS: A three-dimensional (3D) geometric model of entire skull having maxilla, mandible, and their dentitions was created using a computed tomography (CT) image of a healthy male patient. Linear static analysis was carried out by applying 15 g of force on anterior part of maxilla and mandible from labial and lingual sides each to calculate the primary displacement (sagittal, vertical, and transversal) and principal stress levels generated on the maxillary and mandibular dentition, on the maxilla and mandible and on the whole skull. RESULTS: A force of 15 g applied to maxillary anterior teeth from labial side caused a mean deflection of 0.003 mm and stress of 0.004 MPa on the teeth and supporting structures. A force of 15 g applied to maxillary anterior teeth from palatal side caused a mean deflection of 0.017 mm and stress of 0.017 MPa on the teeth and supporting structures. A force of 15 g applied to mandibular anterior teeth from labial side caused a mean deflection of 0.078 mm and stress of 0.051 MPa on the teeth and supporting structures. A force of 15 g applied to mandibular anterior teeth from lingual side caused a mean deflection of 0.077 mm and stress of 0.051 MPa on the teeth and supporting structures. CONCLUSION: For the applied loads and boundary conditions, very small or negligible amount of stresses were observed in maxilla, mandible, and their dentitions. The vibrational frequency of 150 Hz producing 15 g of force did not produce any harmful effects on maxilla, mandible, and their dentitions. Hence, 125-150 Hz of vibrational frequency can be considered optimum. CLINICAL SIGNIFICANCE: An electric toothbrush using the vibration of 125-150 Hz produces negligible stress on teeth and associated structures.

Displacement and periodontal stress analysis on palatally impacted canine - A finite element analysis.

OBJECTIVE: The aim of the study was to analyze the displacement and stress pattern in periodontal ligament (PDL) of palatally impacted canines (PIC) lateral incisors (LI) and first premolars (FP) adjacent to the impacted teeth when different magnitudes of orthodontic extrusion forces were applied along with variation in the inclination of the impacted teeth. METHODOLOGY: A three-dimensional finite element model of a maxilla containing a palatally impacted canine was made with three different inclinations of the palatally impacted canine (model one, model two, and model three). Forces of 50, 70, and 100 g were loaded on the impacted tooth. RESULTS: There was steady increase in the initial rate of displacement in the three teeth when the magnitude of the force that was applied on to the PIC increased. The initial rate of displacement was more in the FP tooth as compared to LI and the impacted teeth. The von Mises stress on the PDL varied along with the variation in the inclination of the impacted canine. CONCLUSION: The study showed that there was variation in the displacement and the stress distribution in the impacted canine when it was placed in different angulations. The rate of displacement of the impacted teeth reduced when the crown of the palatally impacted canines (PIC) was inclined more mesial. The use of minimal forces is ideal to extrude the impacted canines as observed from the study that the PDL stress increases with increase in the magnitude of force.

The prevalence of malocclusion and orthodontic treatment need in Omani adolescent population.

OBJECTIVE: To determine the prevalence of malocclusion and orthodontic treatment need in a sample of Omani adolescents aged 11-16 years. MATERIALS AND METHODS: The total sample included 854 adolescents with 387 boys and 467 girls between the age of 11 and 16 years with no previous orthodontic treatment history. The study design was cross-sectional. The parameters studied were skeletal relationship, lip competency, teeth impactions, missing teeth, contact point displacement, crowding, spacing, incisors and molars classification, overjet, overbite, crossbite, oral hygiene and caries. The Index of Orthodontic Treatment Need (IOTN) was used to study the need for orthodontic treatment for the total sample. RESULTS: There was a high prevalence of Class I jaw relationship (86.2%). About 81.6% of the sample studied had Class I molar relationship and 73.8% had Class I incisors relationship. About 61.4% of the sample had no contact displacement, while 5.2% had contact displacement >4 mm. Severe crowding in the maxilla was found in 2.3% while spacing was found in 24.2%. Around 11% of the sample studied had Class II div 1 incisors relationship, 13.5% Class III and only 1.8% had Class II div 2 incisors relationship. Only 8.6% of the sample studied had an overjet >6 mm while 16.3% had a deep bite and 0.2% had anterior open bite of >4 mm. Teeth impaction was found in 11.7% while permanent missing teeth was present in 1.8%. The results showed that 13.9% had a very great need for treatment while 43.2% of the sample did not need any treatment. CONCLUSION: Among the Omani adolescents, there was a high prevalence of Class I jaw relations and Class I molar relationship. The prevalence of malocclusion and treatment need in Omanis shows some variation when compared to other ethnicities.

Comparison of the influence of dental and facial aesthetics in determining overall attractiveness.

OBJECTIVE: Orthodontic treatment aims at improving the perceived aesthetics; hence knowing which characteristics play a significant role in determining aesthetics is an important orthodontic objective. The aim of this study was to evaluate among laypersons, general dentists and orthodontists the importance of dental versus facial aesthetics. MATERIALS AND METHODS: Frontal face smile photographs of eight volunteers (4 males & 4 females), age group ranging from 16 to 24 years were used for the study. One hundred and fifty evaluators (50 - lay people, 50 general dentists and 50 orthodontists) were asked to select which face they found most attractive - an aesthetically pleasing face with a malocclusion evident in their smile or an average face with an aesthetic smile. A questionnaire method was followed. RESULTS: There was a statistical significant difference in the perception of the faces among the group of the evaluators. Crowding and midline diastema have more of an effect on the perception of attractiveness by laypersons than gumminess or increased buccal corridor space. CONCLUSION: Facial attractiveness is the dominating factor compared to dental aesthetics in cases where the malocclusion is less noticeable.