Comparative studies on the cultivation, yield, and nutritive value of an edible mushroom, Pleurotus tuber-regium (Rumph. ex Fr.) Singer, grown under different agro waste substrates.

In the present study, Pleurotus tuber-regium (Rumph. ex Fr.) Singer collected from Keeriparai forest of Kanyakumari district, South India was cultivated using environmentally benign, low-cost agricultural waste residues (paddy straw, sugarcane bagasse, rice husk, and sawdust) as growth substrates. The main goal of this study was to assess the cultivation, yield, and nutritional value of P. tuber-regium fruiting bodies grown under different growth substrates. Spawn running time and time for primordia formation were found to be shorter in mushroom growing with paddy straw substrate compared to sawdust and sugarcane bagasse. A quick spawn run time was observed in paddy straw substrate (12 ± 1 day) followed by sugarcane bagasse (15 ± 1 day) and sawdust (23 ± 1 day). The primordia was well developed in the macrofungus grown with paddy straw substrate on 18 ± 1 day followed by sugarcane bagasse (22 ± 1 day) and sawdust (32 ± 1 day). Significantly higher yield of fruiting bodies with increased contents of protein and carbohydrate and low level of fat was obtained when P. tuber-regium was cultivated with paddy straw substrate. While, cultivation of P. tuber-regium in sawdust and sugarcane bagasse resulted in increased contents of K, Na, Ca, and Mg along with highest energy value. On the other hand, rice husk did not support the cultivation of this macrofungus. Therefore, it is of significant interest to initiate the commercial production of this macrofungus so as to fight against the problems of malnutrition found in few African and south Asian countries.

Carbon-based adsorbents for the mitigation of polycyclic aromatic hydrocarbon: a review of recent research.

Accumulation of polycyclic aromatic hydrocarbons (PAH) poses significant dangers to the environment and human health. The advancement of technology for cleaning up PAH-contaminated environments is receiving more attention. Adsorption is the preferred and most favorable approach for cleaning up sediments polluted with PAH. Due to their affordability and environmental friendliness, carbonaceous adsorbents (CAs) have been regarded as promising for adsorbing PAH. However, adsorbent qualities, environmental features, and factors may all significantly impact how well CAs remove PAH. According to growing data, CAs, most of which come from laboratory tests, may be utilized to decontaminate PAH in aquatic setups. However, their full potential has not yet been established, especially concerning field applications. This review aims to concisely summarize recent developments in CA, PAH stabilization processes, and essential field application-controlling variables. This review analysis emphasizes activated carbon, biochar, Graphene, carbon nanotubes, and carbon-nanomaterials composite since these CAs are most often utilized as adsorbents for PAH in aquatic systems.

ß-cyclodextrin polymer composites for the removal of pharmaceutical substances, endocrine disruptor chemicals, and dyes from aqueous solution- A review of recent trends.

Cyclodextrin (CD) and its derivatives are receiving attention as a new-generation adsorbent for water pollution treatment due to their external hydrophilic and internal hydrophobic properties. Among types of CD, ß-Cyclodextrin (ßCD) has been a material of choice with a proven track record for a range of utilities in distinct domains, owing to its unique cage-like structural conformations and inclusion complex-forming ability, especially to mitigate emerging contaminants (ECs). This article outlines ßCD composites in developing approaches of their melds and composites for purposes such as membranes for removal of the ECs in aqueous setups have been explored with emphasis on recent trends. Electrospinning has bestowed an entirely different viewpoint on polymeric materials, comprising ßCD, in the framework of diverse functions across a multitude of niches. Besides, this article especially discusses ßCD polymer composite membrane-based removal of contaminants such as pharmaceutical substances, endocrine disruptors chemicals, and dyes. Finally, in this article, the challenges and future directions of ßCD-based adsorbents are discussed, which may shed light on pragmatic commercial applications of ßCD polymer composite membranes.

Viable remediation techniques to cleansing wastewaters comprising endocrine-disrupting compounds.

Endocrine-disrupting chemicals (EDCs) have recently gained prominence as emerging pollutants due to their significant negative impacts on diverse living forms in ecosystems, including humans, by altering their endocrine systems. EDCs are a prominent category of emerging contaminants in various aquatic settings. Given the growing population and limited access to freshwater resources, their expulsion from aquatic systems is also a severe issue. EDC removal from wastewater depends on the physicochemical properties of the specific EDCs found in each wastewater type and various aquatic environments. Due to these components' chemical, physical, and physicochemical diversity, various approaches based on physical, biological, electrochemical, and chemical procedures have been developed to eliminate them. The objective of this review is to provide the comprehensive overview by selecting recent approaches that showed significant impact on the best available methods for removing EDCs from various aquatic matrices. It is suggested that adsorption by carbon-based materials or bioresources is effective at higher EDC concentrations. Electrochemical mechanization works, but it requires expensive electrodes, continual energy, and chemicals. Due to the lack of chemicals and hazardous byproducts, adsorption and biodegradation are considered environmentally friendly. When combined with synthetic biology and an AI system, biodegradation can efficiently remove EDCs and replace conventional water treatment technologies in the near future. Hybrid in-house methods may reduce EDCs best, depending on the EDC and resources.

In vitro evaluation of growth reticence and anticancer potential of 5α,8α-epidioxy-24ᶓ-methylcholesta-6,22-dien-3ß-ol and ergosta-5,7,22-trien-3ß-ol bioactive isolated from an edible mushroom Lentinus tuberregium (fr.).

The focus point of this current work is to evaluate the anticancer and growth inhibitory efficacy of compounds 5α,8α-epidioxy-24ᶓ-methylcholesta-6,22-dien-3ß-ol (LT1), and Ergosta-5,7,22-trien-3ß-ol (LT2) of Lentinus tuberregium (Fr.) on three cell lines such as A673 (Rhabdomyosarcoma), MCF7 (breast cancer), and HCT116 (colorectal carcinoma) by MTT assay. LT1 and LT2 exerted maximal growth inhibition in the order as A673 > HCT116 > MCF7. Comparatively, LT1 was more potent in causing cell growth inhibition than LT2 in the A673 cancer cell line. Based on the MTT assay, A673 cells alone proceeded further as a model to evaluate the anticancer potential of LT1 and LT2 at three different semilogarithmic concentrations (3, 10, 30 µM). The cells exposed with compounds at 24 and 48 h were analyzed by flow cytometry. Exposure of LT1 at 3 and 10 µM concentrations for 24 h caused a G2-M arrest. At 10 µM concentration, cells also accumulated in the G0-G1 phase, indicating a G1 block. These effects were only transient as prolonged exposure (48 h) of LT1 treatment brought back the cell population to normalcy. Both the compounds only at 30 µM concentration have the potential to induce a hypodiploid peak (sub G0), indicating an induction of apoptosis which was explicit by nuclear condensation and fragmentation of nuclei in cells. The dose-dependent and compound-specific apoptotic induction was further confirmed by caspase activity higher in LT1 than LT2. The results highlight the significant growth inhibitory activity and anticancer potential of LT1 and LT2 which are recommended for further in-depth analysis.

Trends and thresholds on bacterial degradation of bisphenol-A endocrine disruptor - a concise review.

Bisphenol-A (BPA) is a monomer found in polycarbonate plastics, food cans, and other everyday chemicals; this monomer and its counterparts are widely used, culminating in its presence in water, soil, sediment, and the atmosphere. Furthermore, because of its estrogenic and genotoxic properties, it has been acknowledged as an endocrine disruptor; contamination of BPA in the environment is becoming a growing concern, and ways to effectively mitigate BPA from the environment are currently explored. Hence, the focal point of the review is to collate the bacterial degradation of BPA with the proposed degradation mechanism, explicitly focusing on researches published between 2017 and 2022. BPA breakdown is dependent primarily on bacterial metabolism, although numerous factors influence its fate in the environment. The metabolic routes for BPA breakdown in crucial bacterial strains were postulated, sourced on the transformed metabolite-intermediates perceived through degradation; enzymes and genes associated with the bacterial degradation of BPA have also been included in this review. This review will be momentous to generate a conceptual strategy and stimulate the progress on bacterial mitigation of BPA as a path to a sustainable cleaner environment.

Polymeric biomolecules based nanomaterials: Production strategies and pollutant mitigation as an emerging tool for environmental application.

The ever-exploding global population coupled with its anthropogenic impact has imparted unparalleled detrimental effects on the environment and mitigating them has emerged as the prime challenge and focus of the current century. The niche of nanotechnology empowered by composites of biopolymers in the handling of xenobiotics and environmental clean-up has an unlimited scope. The appositeness of biopolymer-nanoparticles (Bp-NPs) for environmental contaminant mitigation has received unique consideration due to its exclusive combination of physicochemical characteristics and other attributes. The current review furnishes exhaustive scrutiny of the current accomplishments in the development of Bp-NPs and biopolymer nanomaterials (Bp-NMs) from various polymeric biomolecules. Special attention was provided for polymeric biomolecules such as cellulose, lignin, starch, chitin, and chitosan, whereas limited consideration on gelatin, alginate, and gum for the development of Bp-NPs and Bp-NMs; together with coverage of literature. Promising applications of tailored biopolymer hybrids such as Bp-NPs and Bp-NMs on environmentally hazardous xenobiotics handling and pollution management are discussed as to their notable environmental applications.

Outlook on bismuth-based photocatalysts for environmental applications: A specific emphasis on Z-scheme mechanisms.

Semiconductor photocatalysis is thought to be a viable solution for addressing the growing problem of environmental pollution. Bismuth (Bi) metal oxides can function as a direct plasmonic photocatalyst or cocatalyst to accelerate the photogenerated charge separation and thus improve their photocatalytic activity. Hence, Bi-based photocatalysts have received a lot of attention due to their extensive environmental applications, including pollutant remediation and energy concepts. Massive efforts have been undertaken in the recent decade to find superior Bi-metal oxides (Bi2XO6, X = MO, W, or Cr) and to uncover the corresponding photocatalytic reaction mechanism for the degradation of organic contaminants in water. Herein, the unique crystalline and electronic properties and main synthesis methods, as well as the major Bi-Based direct Z-scheme photocatalysts, are timely discussed and summarized in their usage in water treatment. Besides, the impact of Bi2XO6 in energy storage devices and solar energy conversion is reviewed as an energy application. Finally, the future development and challenges of Z-scheme-based Bi2XO6 photocatalysts are briefly explored, summarized, and forecasted.