Revealing the interaction mechanism between bovine serum albumin (BSA) and a fluorescent coumarin derivative: A multispectroscopic and in silico approach.

The interaction of biomacromolecules with each other or with the ligands is essential for biological activity. In this context, the molecular recognition of bovine serum albumin (BSA) with 4-(Benzo[1,3]dioxol-5-yloxymethyl)-7-hydroxy-chromen-2-one (4BHC) is explored using multispectroscopic and computational techniques. UV-Vis spectroscopy helped in predicting the conformational variations in BSA. Using fluorescence spectroscopy, the quenching behaviour of the fluorophore upon interaction with the ligand is examined, which is found to be a static type of quenching; fluorescence lifetime studies further verify this. The binding constant is discovered to be in the range of 104 M-1, which indicates the moderate type of association that results in reversible binding, where the transport and release of ligands in the target tissue takes place. Fourier-transform infrared spectroscopy (FT-IR) measurements validate the secondary structure conformational changes of BSA after complexing with 4BHC. The thermodynamic factors obtained through temperature-dependent fluorescence studies suggest that the dominant kind of interaction force is hydrophobic in nature, and the interaction process is spontaneous. The alterations in the surrounding microenvironment of the binding site and conformational shifts in the structure of the protein are studied through 3D fluorescence and synchronous fluorescence studies. Molecular docking and molecular dynamics (MD) simulations agree with experimental results and explain the structural stability throughout the discussion. The outcomes might have possible applications in the field of pharmacodynamics and pharmacokinetics.

Spectroscopic Investigation of Coumarin Based Novel Fluorescent TURN OFF Sensor for the Selective Detection of Fe3+: In-vitro Live Cell Imaging Application.

The novel TURN-OFF fluorescent sensors 4-(Benzo[1,3]dioxol-5-yloxymethyl)-7-hydroxy-chromen-2-one (4BHC) and 4-(6-Bromo-benzo[1,3]dioxol-5-yloxymethyl)-7-hydroxy-chromen-2-one (4BBHC) are designed and synthesized for the spectrofluorometric detection of the biologically important Fe3+ ions, which has sensitive and selective fluorescence quenching over other competitive metal ions. The effectiveness of the sensors and rapid response are validated through UV-Visible, and fluorescence spectral changes. These spectral changes could be due to the formation of coordination bond between ligand and metal ion. The binding stoichiometry of both sensors with Fe3+ ions is studied with the help of Job's plot, which gives a 1:2 coordination ratio; this is further confirmed through DFT, IR and NMR studies. The association constants of 4BHC and 4BBHC are calculated through Benesie-Hildebrand plots, and they are found to be 6 × 104 M-1 and 11.2 × 104 M-1 respectively. Following, LOD is calculated to define the range of sensitivity of the proposed sensors and is found to be 3.43 µM and 2.14 µM respectively. The chemical hardness parameter suggested that both sensors are soft molecules. In addition, low cytotoxicity levels of 4BHC and 4BBHC led to the demonstration of their efficacy in In-Vitro imaging of Fe3+ ions inside living cells, which ensures that these sensors are promising candidates for bioimaging.

Exploration of Coumarin Derivative: Experimental and Computational Modeling for Dipole Moment Estimation and Thermal Sensing Application.

The Optical properties of the FBTC (1-((4-((5-chlorobenzo[d]oxazol-2-ylthio)methyl)-1H-1,2,3-triazol-1-yl)methyl)-3H-benzo[f]chromen-3-one) molecule were studied experimentally and theoretically. The spectra of absorption and fluorescence were recorded in various solvents to explore their Solvatochromic behavior and dipole moment at room temperature. To determine the ground and excited state of dipole moment experimentally and theoretically, we employed different Solvatochromic techniques, including microscopic solvent polarity functions developed by Lippert, Bakhshiev, Kawaski-Chamma-Viallet, and Reichardt's, as well as density functional theory (DFT) and time-dependent density functional theory (TD-DFT) methods. The stability of the excited state dipole moment in FBTC is higher. Using prime functional, FBTC was optimized in its ground state, and its HOMO (Highest Occupied Molecular Orbital) and LUMO (Lowest Unoccupied Molecular Orbital), energies were estimated. These values were then compared with those obtained through cyclic voltammetry. Based on the HOMO and LUMO values given, we calculated the global reactivity parameter and energy gap, which was found to be low at 3.77 eV. This study also includes an estimation of electron absorption energies and oscillator strength. Natural population analysis (NPA), Milliken atomic charge, and molecular electrostatic potential (MESP) map are correlated. In addition, FBTC exhibited exceptional physiological temperature sensing behaviour from 20 °C -65 °C with high relative sensitivity and firm stability. Hence these results confirm that FBTC is a potential candidate for photonic devices and it's also applicable in optical temperature sensing.

Experimental and Theoretical Spectroscopic Investigation on Coumarin Based Derivatives for Non-Linear Optoelectronics Application.

The spectral properties of MBTC (4-((4-((Benzo[d]oxazol-2-ylthio)methyl)-1H-1,2,3-triazol-1-yl)methyl)-7-methoxy-2H-chromen-2-one), CBTC (4-((4(((5Chlorobenzo[d]oxazol-2-yl)thio)methyl)-1H-1,2,3-triazol-1-yl)methyl)-2H-benzo[h]chromen-2-one) and TBTC (4-((4-((Benzo[d]oxazol-2-ylthio)methyl)-1H-1,2,3-triazol-1-yl)methyl)6(tertbutyl)2Hchromen-2-one) were studied in series of solvents with different polarity at room temperature to explore their solvatochromic effect and dipole moment. Stokes shift revealed a bathochromic shift with varying solvent polarity for all molecules which implies π-π*transition. The ground state and excited state dipole moment of the molecules are calculated experimentally using salvatochromic methods like Lippert-Mataga, Bakhshiev, Kawaski-chamma-viallet, and Reichardt's microscopic solvent polarity functions and computationally by density functional theory (DFT) method. It is observed that the excited state dipole moment is higher than the ground state so synthesized molecules are more polar in the excited state than in the ground state. Using the DFT method HOMO and LUMO energy values were obtained and compared with values obtained by the cyclic voltammetry. Using the values of HOMO (highest occupied molecular orbital) and LUMO (lowest unoccupied molecular orbital) we have estimated energy gap, chemical hardness (ɳ), chemical softness (s), ionization potential (IP), electron affinity (EA), electronegativity (χ), electrophilicity (ω), and chemical potential (µ) of the molecules were estimated. The energy gap of MBTC, CBTC, and TBTC were found to be low, that is 3.861 eV, 3.822 eV, and 3.801 eV respectively, this indicates molecules are more reactive and it has the easiest π-π* transition. Further electrophilic and nucleophilic sites were figured out using molecular electrostatic potential (MESP) which is useful in photochemical reactions. Hence the quantum chemical calculation and spectroscopic properties of the molecules can give a better understanding of their use in an optoelectronic device.

Photophysical Investigation of a Benzimidazole Derivative and Its Applications in Selective Detection of Fe3+, Thermosensing and Logic Gates.

The fluorescence based applications such as chemosensing of Fe3+ ion, temperature sensing, NOR-gate molecular logic operations, and fluorescent ink were achieved using an expired medicine namely Pantoprazole (sensor1) which is a derivative of benzimidazole class. The phenomenon of quenching was a basic principle used in sensing Fe3+. We found that there was a combined effect of dynamic and static processes in quenching of fluorescence of sensor1. To confirm the selectiveness of sensor1, we performed interference experiments with other metal ions. There was no interference between these metal ions and Fe3+. The low LOD value of 1.032 µM suggested that the molecule is highly sensitive towards Fe3+. A high quantum yield of 8.087% increased the possibility of using sensor1 for light applications. There was a 2:1 stoichiometric ratio between sensor1 and Fe3+. The FTIR data analysis confirmed the presence of functional groups S = O, C-O-C, etc. The average particle size found with the DLS method was 130.5 nm. The zeta potential of -12.7 mV indicated that sensor1 is quite stable in solution form. For logic gate application EDTA (Ethylenediaminetetraaceticacid) and Fe3+ were considered as inputs and fluorescence intensity was taken as an output. In thermal sensing application, the high value of activation energy i.e. 908 meV and relative sensitivity of 1.2% 0C-1 affirmed that sensor1 can be used for thermal applications. The sensor1 was also apt for fluorescent ink application. Hence this investigation deduced that sensor1 can be a potential candidate for such applications over other conventional synthesized fluorescent probes.

Re-usage of the Waste Drug as Molecular Chemosensor for Fe3+ Ion: Application towards Fluorescent Ink.

Herein, a novel notion is used to reuse an expired drug namely Telmisartan (Sensor 2) to optically sense the Fe3+ metal ion. Direct re-usage of the drug avoided wearisome procedures of synthesis, hence proved the method as simple and economic. Sensor 2 found highly stable in the temperature range 25-75 °C. Relative fluorescence was almost the same even after 35 days of observation. There were no significant changes in wavelength even after adding different concentrations of FeCl3, which shows the high stability of the compound. The value of Limit of Detection (LOD) observed was 34.2 nM. FTIR studies confirmed the presence of carboxylic group. The method of fluorescence quenching was used to detect the Fe3+ ion. The association between Sensor 2 and Fe3+ was analyzed using Benesi-Hildebrand relation. Positive deviation from the linearity of S-V plots suggested that the quenching was not purely dynamic. Further, this deviation was analyzed by the sphere of action quenching model. To investigate whether the quenching is diffusion limited, we applied the finite sink approximation model and deduced that quenching is due to both static and dynamic processes. Due to the high fluorescence property of the molecule, it was successfully tested to be used as fluorescent ink.

Estimation of Photophysical and Electrochemical Parameters of Bioactive Thiadiazole Derivative.

The absorption and fluorescence spectra of synthesized 4-[5-(2,5-Dimethyl-pyrrol-1-yl)-[1, 3, 4] thiadiazol-2-ylsulfanylmethyl]-6-methoxy-chromen-2-one (DTYMC) compound were recorded in various solvents like acetone, acetonitrile, chloroform, dimethyl formamide (DMF),1,4-dioxane, ethanol, ethyl acetate, methanol, tetrahydrofuran (THF) and dimethylsulphoxide (DMSO) at room temperature in order to estimate the ground and excited state dipole moment. The ground state dipole moment (µg) and excited state dipole moment (µe) were calculated using solvatochromic shift method which involve equations proposed by Lippert, Bakshiev and Kawski-Chamma-Viallete. The results were signified that the excited state dipole moment is greater than the ground state dipole moment, which indicates the excited state is more polar than the ground state of the molecule. The bond angle between the ground state and excited state dipole moments were found to be 00, The change in dipole moment (∆µ) was calculated using microscopic solvent polarity parameter ([Formula: see text]). Further multiple linear regression analysis of Kamlet-Taft parameter, HOMO-LUMO energy were determined by cyclic voltammetry using phosphate buffer solution.

Study of Photophysical Properties on Newly Synthesized Coumarin Derivatives.

Herein, we have studied the photophysical properties for three newly synthesized coumarin derivatives; 4-((2,6-dibromo-4-methylphenoxy)methyl)-2H-benzo[h]chromen-2-one (DMB), 4-((3,4-dihydro-6,7-dimethoxyisoquinolin-1-yl)methyl)-6-methyl-2H-chromen-2-one (DIM) and 4-((p-tolyloxy)methyl)-6-methoxy-2H-chromen-2-one (TMC). The absorption and emission spectra for above said molecules were recorded in different solvents at room temperature in order to calculate their ground and excited state dipole moments. The ground (µ g ) and excited state dipole (µ e ) moments of these coumarin derivatives were calculated using Lippert's, Bakshiev's and Kawski-Chamma-Viallet's equations by the solvatochromic shift method, which involves a variation of Stokes shift with the solvent dielectric constant and refractive index. Ground state dipole moments (µ g ) were also calculated from the Guggenheim method using the dielectric constant and refractive index of the solute molecule. The value of ground state dipole moment obtained from these two methods is well correlated. Further, it is notified that the excited state dipole moment is larger than the ground state dipole moment for all three solute molecules. It inferred that the excited state for above said molecules is more polar than the ground state. The present investigations may shine in the design of nonlinear optical materials. Graphical Abstract The photophysical properties for novel coumarin derivatives were studied in different solvents.Ground and excited state dipole moments were estimated by the solvatochromic shift method. The excited state dipole moment is greater than the ground state dipole moment in systems studied. The excited state is more polar than the ground state. The present investigation may be shine in the design of non linear optical materials.

Photophysical Properties of a Novel and Biologically Active 3(2H)-Pyridazinone Derivative Using Solvatochromic Approach.

Herein, we report photophysical properties of a novel and biologically active 3(2H)-pyridazinone derivative 5-(4-chloro-2-hydoxy-phenyl)-2-phenyl-2H-pyridazin-3-one [CHP] molecule using solvatochromic approaches. Absorption and fluorescence spectra of CHP molecule have been measured at room temperature in various solvents of different polarities. From this, it is observed that the positions, intensities and shapes of the absorption and emission bands are usually modified. Experimentally, the ground and excited state dipole moments are estimated using solvatochromic shift method which involves Lippert's, Bakshiev's and Kawski-Chamma-Viallet's equations. Theoretically, the ground state dipole moment was estimated using the Gaussian-09 program. The value of ground state dipole moment estimated using experimental and theoretical methods are well correlated. This inference that the molecular geometry is taken for CHP molecule under theoretical and experimental methods are similar. Further, we observed that the excited state dipole moment (µ e ) is greater than the ground state dipole moment (µ g ) which indicates that the excited state is more polar than the ground state. Furthermore, we have estimated an angle between the ground and excited state dipole moments. In addition, we have estimated the fluorescence quantum yield of CHP molecule using Rhodamine B as a standard reference in different solvents.

Analysis of Fluorescence Quenching for Newly Synthesized Biologically Active 3(2H)-pyridazinone Derivative by Aniline.

Herein, we have studied the analysis of fluorescence quenching for newly synthesized biologically active 3(2H)-pyridazinone derivative 5-(5-bromo-2-hydroxy-phenyl)-2-phenyl-2H-pyridazin-3-one [BHP] by various concentrations of aniline using UV-Visible spectroscopy, fluorescence spectroscopy and time-correlated single photon counting technique in five different solvents namely, methanol, ethanol, propan-2-ol, dimethylsulfoxide and ethyl acetate at room temperature. The fluorescence intensity of BHP molecule decrease with increasing in the aniline concentration and it is studied using the Stern-Volmer relation. The obtained Stern-Volmer plots were found to be linear in all the five solvents. The various parameters responsible for the fluorescence quenching such as quenching rate parameters (k q ), diffusion rate parameter (k d ) and the probability of quenching per encounter (p) were experimentally calculated in all five solvents. An activation energy of quenching (E a ) was calculated using the values of activation energy of diffusion (E d ) and p. It was found that the values of E a are greater than E d in all five solvents studied. Further, it is inferred that the fluorescence quenching reactions in BHP molecule are more significantly affected by activation energy processes.

Solvent Effects on the Electronic Absorption and Fluorescence Spectra of HNP: Estimation of Ground and Excited State Dipole Moments.

We report the effect of solvents on absorption and fluorescence spectra of biologically active 3(2H)-pyridazinone namely 5-(2-hydroxy-naphthalen-1-yl)-2-phenyl-2H-pyridazin-3-one (HNP) in different solvents at room temperature. The ground and the excited state dipole moments of HNP molecule was estimated from Lippert's, Bakshiev's and Kawski-Chamma-Viallet's equations using the solvatochromic shift method. The ground state dipole moment (µ g ) was also estimated by Guggenheim and Higasi method using the dielectric constant and refractive index of solute at different concentrations, the µ g value obtained from these two methods are comparable to the µ g value obtained by the solvatochromic shift method. The excited state dipole moment (µ e ) is greater than the ground state dipole moment (µ g ), which indicates that the excited state is more polar than the ground state. Further, we have evaluated the change in dipole moment (Δµ) from the solvatochromic shift method and on the basis of molecular-microscopic solvent polarity parameter[Formula: see text], later on the values were compared.