RESUMO
A new photoacoustic soot spectrometer (PASS) operating at 880 nm was developed, for the first time, for filter-free measurements of black carbon (BC). The performance of the developed PASS was characterized and evaluated using a reference aethalometer AE51 on incense smoke in the air. An excellent correlation on the measurement of incense smoke was found between the two instruments in comparison with a regression coefficient of 0.99. A 1 σ detection limit of 0.8 µg m-3 was achieved for BC measurement at a time resolution of 1 s. It can be further reduced to 0.1 µg m-3, using a longer integration time of 1 min.
Assuntos
Poluentes Atmosféricos , Fuligem , Poluentes Atmosféricos/análise , Carbono/análise , Monitoramento Ambiental , Análise EspectralRESUMO
Diabetes mellitus is a widespread metabolic disease without cure. Great efforts are being made to develop a non-invasive monitoring of the blood glucose level. Various attempts have been made, including a number of non-optical approaches as well as optical techniques involving visible, near- and mid-infrared light. However, no true breakthrough has been achieved so far, i.e., there is no fully non-invasive monitoring device available. Here we present a new study based on mid-infrared spectroscopy and photoacoustic detection. We employ two setups, one with a fiber-coupled photoacoustic (PA) cell and a tunable quantum cascade laser (QCL), and a second setup with two QCLs at different wavelengths combined with PA detection. In both cases, the PA cells are in direct skin contact. The performance is tested with an oral glucose tolerance test. While the first setup often gives reasonable qualitative agreement with ordinary invasive blood glucose measurements, the dual-wavelength approach yields a considerably improved stability and an uncertainty of only ±30 mg/dL of the blood glucose concentration level at a confidence level of 90%. This result is achieved without advanced data treatment such as principal component analysis involving extended wavelength ranges.
Assuntos
Glucose/análise , Lasers Semicondutores , Técnicas Fotoacústicas/métodos , Pele/química , HumanosRESUMO
We report the first application of gas total emission using a DFB diode laser for gas concentration measurements combined with two LEDs for gas velocity measurements. In situ gas total emissions and particle density measurements in an industrial pipeline using simultaneous tunable diode laser absorption spectroscopy (TDLAS) and optical scintillation cross-correlation technique (OSCC) are presented. Velocity mean values obtained are 7.59 m/s (OSCC, standard deviation is 1.37 m/s) and 8.20 m/s (Pitot tube, standard deviation is 1.47 m/s) in a steel plant pipeline for comparison. Our experiments demonstrate that the combined system of TDLAS and OSCC provides a new versatile tool for accurate measurements of total gas emissions.
RESUMO
We propose a method for localizing a fire source using an optical fiber distributed temperature sensor system. A section of two parallel optical fibers employed as the sensing element is installed near the ceiling of a closed room in which the fire source is located. By measuring the temperature of hot air flows, the problem of three-dimensional fire source localization is transformed to two dimensions. The method of the source location is verified with experiments using burning alcohol as fire source, and it is demonstrated that the method represents a robust and reliable technique for localizing a fire source also for long sensing ranges.
RESUMO
This letter reports on mid-infrared laser-based detection and analysis of chemical species. Emphasis is put on broadly tunable laser sources and sensitive detection schemes. Selected examples from our lab illustrate the performance and potential of such systems in various areas including environmental and medical sensing.
RESUMO
BACKGROUND: Exposure to surgical smoke in the operation room has been a long-standing concern. Smoke generated by the interaction between lasers or electrocautery devices with biological tissue contains several toxic and carcinogenic substances, but only a few studies so far have provided quantitative data necessary for risk assessment. METHODS: With laser and Fourier-transform infrared spectroscopy, we investigated the chemical composition of smoke produced with a vessel-sealing device in an anoxic environment during laparoscopic surgery. RESULTS: Harmless concentrations of methane (<34 ppm), ethane (<2 ppm), and ethylene (<10 ppm) were detected. Traces of carbon monoxide (<3.2 ppm) and of the anesthetic sevoflurane (<450 ppm) were also found. CONCLUSIONS. Gas leaking or gas being released from the pneumoperitoneum could therefore increase pollution by waste anesthetic gas in the operating room. Most toxic compounds found in earlier studies remained undetected. Adverse health effects for operating room personnel due to some of those substances (e.g., toluene, styrene, xylene) can be excluded, assuming no significant losses or changes in the chemical composition of the samples occurred between our sampling and measurements.
Assuntos
Poluentes Ocupacionais do Ar/análise , Eletrocoagulação , Laparoscopia , Exposição Ocupacional/análise , Fumaça/análise , Poluentes Ocupacionais do Ar/química , Eletrocoagulação/instrumentação , Eletrocoagulação/métodos , Humanos , Hidrocarbonetos Acíclicos/análise , Hidrocarbonetos Acíclicos/química , Laparoscopia/instrumentação , Laparoscopia/métodos , Limite de Detecção , Salas Cirúrgicas , Espectrofotometria InfravermelhoRESUMO
Biomedical devices employed in therapy, diagnostics and for self-monitoring often require a high degree of flexibility and compactness. Many near infrared (NIR) optical fiber-coupled systems meet these requirements and are employed on a daily basis. However, mid-infrared (MIR) fibers-based systems have not yet found their way to routine application in medicine. In this work we present the implementation of the first MIR fiber-coupled photoacoustic sensor for the investigation of condensed samples in the MIR fingerprint region. The light of an external-cavity quantum-cascade laser (1010-1095 cm(-1)) is delivered by a silver halide fiber, which is attached to the PA cell. The PA chamber is conically shaped to perfectly match the beam escaping the fiber and to minimize the cell volume. This results in a compact and handy sensor for investigations of biological samples and the monitoring of constituents both in vitro and in vivo. The performance of the fiber-coupled PA sensor is demonstrated by sensing glucose in aqueous solutions. These measurements yield a detection limit of 57 mg/dL (SNR = 1). Furthermore, the fiber-coupled sensor has been applied to record human skin spectra at different body sites to illustrate its flexibility.
Assuntos
Tecnologia Biomédica/instrumentação , Tecnologia Biomédica/métodos , Raios Infravermelhos , Fibras Ópticas , Técnicas Fotoacústicas/instrumentação , Absorção , Glucose/análise , Humanos , Processamento de Sinais Assistido por Computador , Pele , Soluções , VibraçãoRESUMO
No reliable non-invasive glucose monitoring devices are currently available. We implemented a mid-infrared (MIR) photoacoustic (PA) setup to track glucose in vitro in deep epidermal layers, which represents a significant step towards non-invasive in vivo glucose measurements using MIR light. An external-cavity quantum-cascade laser (1010-1095 cm(-1)) and a PA cell of only 78 mm(3) volume were employed to monitor glucose in epidermal skin. Skin samples are characterized by a high water content. Such samples investigated with an open-ended PA cell lead to varying conditions in the PA chamber (i.e., change of light absorption or relative humidity) and cause unstable signals. To circumvent variations in relative humidity and possible water condensation, the PA chamber was constantly ventilated by a 10 sccm N(2) flow. By bringing the epidermal skin samples in contact with aqueous glucose solutions with different concentrations (i.e., 0.1-10 g/dl), the glucose concentration in the skin sample was varied through passive diffusion. The achieved detection limit for glucose in epidermal skin is 100 mg/dl (SNR=1). Although this lies within the human physiological range (30-500 mg/dl) further improvements are necessary to non-invasively monitor glucose levels of diabetes patients. Furthermore spectra of epidermal tissue with and without glucose content have been recorded with the tunable quantum-cascade laser, indicating that epidermal constituents do not impair glucose detection.
RESUMO
The consumption of drugs is of great concern worldwide. Various drug tests for humans have been developed but there is no compact and easy-to-use test device available yet for direct semi-quantitative drug testing in the field. We suggest using attenuated total reflection (ATR) infrared spectroscopy as a sensing method to analyze human saliva samples with respect to drugs. In this paper, we present ATR spectra in the infrared range between 2300 and 900 cm(-1) as a first step towards such a device. We emphasize the common drug cocaine and its metabolites and investigate the problems of spectral interferences of selected diluents, masking agents, common medication, and soft drinks. Furthermore, spectra of saliva samples are recorded and a time-dependent change of the spectral signatures after alcohol consumption is presented. To the best of our knowledge, it is the first time that not only spectra of the drug of interest (cocaine) dissolved in water and in saliva but also spectra of interfering compounds possibly present in the saliva sample of a tested subject are discussed. This paper presents the most appropriate spectral range for strong cocaine absorption (including its metabolites) and minimum interference by the investigated substances. This spectral window is found to be between 1800 and 1710 cm(-1). In addition, we demonstrate the feasibility to identify cocaine in saliva at a concentration of 0.020 mg/ml with IR-ATR-spectroscopy without any separation or extraction procedures. For example, this technique could also be applied for drug detection in waste water.
Assuntos
Cocaína/análise , Saliva/química , Espectroscopia de Infravermelho com Transformada de Fourier/métodos , Detecção do Abuso de Substâncias/métodos , Consumo de Bebidas Alcoólicas/epidemiologia , Cocaína/metabolismo , Etanol/administração & dosagem , Etanol/química , Estudos de Viabilidade , Humanos , Fatores de TempoRESUMO
Transmission spectroscopy over large spectral ranges (>100 cm(-1)) generally requires a reference measurement to be taken separately from the sample scan. The ratio of the two measurements (i.e., the transmittance) is therefore susceptible to baseline changes that occur between the recording of the two spectra. The origins of relatively strong baseline changes (â«1%) of a difference-frequency-generation-based laser spectrometer (tuning range 2900-3144 cm(-1), 150 µW average power) were investigated and a method for minimizing them by improving reproducibility and reducing measurement time is presented. The new method was tested for a gas mixture and the sensitivity for broad absorption features was determined as 5×10(-3) minimum measurable absorbance for a total scan duration of 70 min.
RESUMO
In view of in vivo surgical smoke studies a difference-frequency-generation (DFG) laser spectrometer (spectral range 2900-3144 cm(-1)) and a Fourier-transform infrared (FTIR) spectrometer were employed for infrared absorption spectroscopy. The chemical composition of smoke produced in vitro with an electroknife by cauterization of different animal tissues in different atmospheres was investigated. Average concentrations derived are: water vapor (0.87%), methane (20 ppm), ethane (4.8 ppm), ethene (17 ppm), carbon monoxide (190 ppm), nitric oxide (25 ppm), nitrous oxide (40 ppm), ethyne (50 ppm) and hydrogen cyanide (25 ppm). No correlation between smoke composition and the atmosphere or the kind of cauterized tissue was found.
Assuntos
Cauterização/métodos , Fumaça/análise , Espectroscopia de Infravermelho com Transformada de Fourier/métodos , Animais , Monóxido de Carbono/análise , Desenho de Equipamento , Etano/análise , Cianeto de Hidrogênio/análise , Metano/análise , Óxido Nítrico/análise , Óxido Nitroso/análise , Espectrofotometria/métodosRESUMO
Following the ingestion of only 5.1 mL of D2O, a mid-infrared laser spectrometer determines the D/H isotope ratio increase in exhaled water vapor for the first time, to the best of our knowledge. This increase is still detectable several weeks after the heavy water intake. Collected breath samples are directly transferred into a high-temperature multipass cell operated at 373 K. No breath sample preparation is required. Aside from the capability to hinder unwanted condensation, measurements at elevated temperatures offer other advantages such as a lower temperature dependence of the delta value or the possibility to vary the intensity of absorption lines. We lay the foundation for many laser-based clinical applications. As an example, we measure a total body water weight of 55.2%+/-1.8% with respect to the total body weight, in agreement with the normal value of the male population.
Assuntos
Testes Respiratórios/instrumentação , Óxido de Deutério/análise , Deutério/análise , Hidrogênio/análise , Isótopos/análise , Espectrofotometria Infravermelho/instrumentação , Água Corporal , Testes Respiratórios/métodos , Processamento Eletrônico de Dados , Desenho de Equipamento , Humanos , Lasers , Masculino , Óptica e Fotônica , Espectrofotometria Infravermelho/métodos , Temperatura , Fatores de TempoRESUMO
We present a major improvement of an algorithm based on a spectral library search for the quantitative analysis of multicomponent gas samples with unknown compositions. A quantitative spectral database of infrared spectra is used as a training set to compute regression coefficients. Concentrations are computed in the principal component space via principal component regression (PCR). In addition to previous algorithms, we introduce a rating for each candidate substance depending on the concentration found with PCR and a filter that removes candidates that are predicted with negative concentrations if their rating is below a certain threshold. Negative concentrations arise when the measured spectrum contains components that are not contained in the database. The PCR is recomputed until all candidates have a rating above the threshold. Then an adaptive filter "subtracts" the substance with the highest rating from both the measured spectrum and the library and appends it to a hit list. The iteration of this procedure directly produces a list of substances in order of descending importance (i.e., contribution to the measured absorbance) with their corresponding concentrations. The algorithm is tested on spectra of multicomponent surgical smoke samples. The four main components (water, methane, ethane, and ethene) are identified correctly (within the top 5 of the hit list) for an appropriate choice of the rating threshold. The algorithm describes the composition of the smoke sample correctly despite the presence of features in the spectrum that cannot be explained by the spectrum of any single substance present in the database.
RESUMO
BACKGROUND: The potassium-titanyl-phosphate (KTP) laser technique for photo-selective vaporisation of the prostate (PVP) has been regularly improved over the last decade. Nonetheless, decreasing efficiency of tissue vaporisation during the course of the operation and macroscopic alterations of the laser fibre's tip are regularly observed and seem to affect the outcome of this procedure. OBJECTIVE: To investigate the course of power output and to determine the type and extent of fibre deterioration during PVP. DESIGN, SETTING, AND PARTICIPANTS: Forty laser fibres were investigated during PVP in 35 consecutive patients with prostatic bladder outflow obstruction between January 2007 and August 2007 in a university hospital. INTERVENTION: All patients underwent PVP performed by three different surgeons using the 80-W KTP laser. MEASUREMENTS: Power output was measured at the beginning and regularly throughout PVP and throughout in vitro vaporisation without fibre-tissue contact. Microscopic documentation of the fibre tip was performed after the procedure. RESULTS AND LIMITATIONS: Carbonisation and melting of the fibre tip was regularly visible and appeared to be more pronounced as more energy was applied. Additionally, 90% of the fibres showed a significant decrease of power output during PVP, resulting in an end-of-lifespan (ie, 275-kilojoule) median power output of 20% of the initial value. Final median power output after in vitro vaporisation was 83% of the starting value. The extent of the structural and functional changes might only be valid for the operative technique performed in this investigation. CONCLUSIONS: Fibre deterioration caused significant reduction of power output during PVP. This finding is an explanation for the often observed decreasing efficiency of tissue ablation and may also be responsible for some of the typical drawbacks and complications of PVP. Hence, improvements in fibre quality are necessary to advance the efficiency of this technique.
Assuntos
Eletricidade , Lasers de Estado Sólido , Ressecção Transuretral da Próstata/instrumentação , Idoso , Idoso de 80 Anos ou mais , Falha de Equipamento , Humanos , Masculino , Pessoa de Meia-IdadeRESUMO
BACKGROUND: Dissection during laparoscopic surgery produces smoke containing potentially toxic substances. The aim of the present study was to analyze smoke samples produced during laparoscopic colon surgery using a bipolar vessel sealing device (LigaSuretrade mark). METHODS: Four consecutive patients undergoing left-sided colectomy were enrolled in this pilot study. Smoke was produced by the use of LigaSuretrade mark. Samples (5,5l) were evacuated from the pneumoperitoneum in a closed system into a reservoir. Analysis was performed with CO2-laser-based photoacoustic spectroscopy and confirmed by a Fourier-transform infrared spectrum. The detected spectra were compared to the available spectra of known toxins. RESULTS: Samples from four laparoscopic sigmoid resections were analyzed. No relevant differences were noted regarding patient and operation characteristics. The gas samples were stable over time proven by congruent control measurements as late as 24 h after sampling. The absorption spectra differed considerably between the patients. One broad absorption line at 100 ppm indicating H2O and several unknown molecules were detected. With a sensitivity of alpha min ca 10-5 cm-1 no known toxic substances like phenol or indole were identified. CONCLUSION: The use of a vessel sealing device during laparoscopic surgery does not produce known toxic substances in relevant quantity. Further studies are needed to identify unknown molecules and to analyze gas emission under various conditions.
RESUMO
We present an analytical technique based on direct absorption laser spectroscopy for high precision and simultaneous determination of the mixing ratios of the most abundant nitrous oxide isotopic species: (14)N(15)N(16)O, (15)N(14)N(16)O and (14)N(2) (16)O. A precision of 0.5 ??? was achieved for the site specific isotope ratios of N(2)O at 90 ppm using an averaging time of 300 s.
Assuntos
Lasers de Estado Sólido , Isótopos de Nitrogênio/análise , Isótopos de Nitrogênio/química , Óxido Nitroso/análise , Óxido Nitroso/química , Espectrometria de Massas por Ionização e Dessorção a Laser Assistida por Matriz/métodos , Reprodutibilidade dos Testes , Sensibilidade e EspecificidadeRESUMO
Numerous gas-sensing devices are based on infrared laser spectroscopy. In this paper, the technique is further developed and, for the first time, applied to forensic urinalysis. For this purpose, a difference frequency generation laser was coupled to an in-house-built, high-temperature multipass cell (HTMC). The continuous tuning range of the laser was extended to 329 cm(-1) in the fingerprint C-H stretching region between 3 and 4 microm. The HTMC is a long-path absorption cell designed to withstand organic samples in the vapor phase (Bartlome, R.; Baer, M.; Sigrist, M. W. Rev. Sci. Instrum. 2007, 78, 013110). Quantitative measurements were taken on pure ephedrine and pseudoephedrine vapors. Despite featuring similarities, the vapor-phase infrared spectra of these diastereoisomers are clearly distinguishable with respect to a vibrational band centered at 2970.5 and 2980.1 cm(-1), respectively. Ephedrine-positive and pseudoephedrine-positive urine samples were prepared by means of liquid-liquid extraction and directly evaporated in the HTMC without any preliminary chromatographic separation. When 10 or 20 mL of ephedrine-positive human urine is prepared, the detection limit of ephedrine, prohibited in sports as of 10 microg/mL, is 50 or 25 microg/mL, respectively. The laser spectrometer has room for much improvement; its potential is discussed with respect to doping agents detection.
Assuntos
Gases/química , Gases/urina , Lasers , Espectrofotometria Infravermelho/instrumentação , Espectrofotometria Infravermelho/métodos , Urina/química , Efedrina/análogos & derivados , Efedrina/química , Efedrina/urina , Saúde , Humanos , Estrutura Molecular , Probabilidade , Sensibilidade e Especificidade , Estereoisomerismo , Temperatura , Urinálise , VibraçãoRESUMO
A laser spectroscopic system based on a cw difference-frequency generation source with a ratiometric multipass absorption detection scheme was employed for high-resolution spectroscopic investigation of gas-phase monomethylamine (MMA), dimethylamine (DMA), and trimethylamine (TMA). Possible application of the system as a noninvasive human breath analyzer for renal and liver diseases is targeted. The system operates in the fundamental C-H stretch absorption region around 2740-2860 cm(-1). A detection sensitivity of 2 x 10(-6) cm(-1) Hz(-(1/2)) (for signal-to-noise ratio SNR=1) is achieved, corresponding to detection limits of 900 ppb (parts in 10(9)) for MMA, 450 ppb for DMA, and 120 ppb for TMA in mixtures containing H2O and CO2 with concentrations of up to those present in human breath (2% and 5%, respectively). Future developments are discussed to further improve these detection limits that are currently still about 2 orders of magnitude higher than required for direct methylamine monitoring in human breath.
Assuntos
Testes Respiratórios , Metilaminas/química , Espectrofotometria Infravermelho/métodos , Aminas/química , Calibragem , Carbono/química , Dimetilaminas/química , Desenho de Equipamento , Humanos , Hidrogênio/química , Modelos Químicos , Óptica e FotônicaRESUMO
High-resolution absorption spectra of gas-phase monomethylamine (MMA, CH(3)NH(2)) and dimethylamine [DMA, (CH(3))(2)NH] in the region of the first overtone of the NH stretch vibration are reported. Measurements were performed with a near-infrared laser spectrometer based on the cavity-ringdown (CRD) detection technique. The minimum detectable absorption coefficient for the CRD detection setup is alpha(min)=1.55 x 10(-8) cm(-1) (for SNR = 1). This corresponds to detection limits of 350 parts in 10(9) (ppb) for MMA and 1.6 parts in 10(6) (ppm) for DMA in synthetic gas mixtures under interference-free conditions, or 10 ppm and 60 ppm for MMA and DMA, respectively, in the case of gas mixtures such as exhaled human breath containing H(2)O, CO(2), and other absorbing gases in this range.
Assuntos
Aminas/química , Testes Respiratórios , Metilação , Espectrofotometria/métodos , Desenho de Equipamento , Expiração , Gases , Humanos , Nefropatias/diagnóstico , Hepatopatias/diagnóstico , Metilaminas/química , Espectroscopia de Luz Próxima ao Infravermelho/métodosRESUMO
The first demonstration, to the best of our knowledge, of continuous-wave (cw) difference-frequency generation (DFG) in LiInS2 crystal is reported. Wide spectral coverage (5.5-11.3 microm) has been obtained with angle and wavelength tuning for type II (eoe) critically phase-matched parametric interaction. The phase-matching conditions in cw DFG have been investigated, which allowed us to improve the Sellmeier parameters by use of a two-pole dispersion equation. An effective nonlinear coefficient deff = 6.9 +/- 0.8 pm/V has been determined at approximately 7 microm relative to the well-known nonlinear coefficient d36 of AgGaS2, which yields a power-conversion efficiency of approximately 12.4 microW/(W2 cm). We evaluated the high-resolution spectral characteristics of the DFG source by recording C2H2 and SO2 spectra.