RESUMO
Avian infectious bronchitis is an acute respiratory disease of poultry of particular concern for global food security. Investigation of infectious bronchitis virus (IBV), the causative agent of avian infectious bronchitis, via reverse genetics enables deeper understanding of virus biology and a rapid response to emerging variants. Classic methods of reverse genetics for IBV can be time consuming, rely on recombination for the introduction of mutations, and, depending on the system, can be subject to genome instability and unreliable success rates. In this study, we have applied data-optimized Golden Gate Assembly design to create a rapidly executable, flexible, and faithful reverse genetics system for IBV. The IBV genome was divided into 12 fragments at high-fidelity fusion site breakpoints. All fragments were synthetically produced and propagated in E. coli plasmids, amenable to standard molecular biology techniques for DNA manipulation. The assembly can be carried out in a single reaction, with the products used directly in subsequent viral rescue steps. We demonstrate the use of this system for generation of point mutants and gene replacements. This Golden Gate Assembly-based reverse genetics system will enable rapid response to emerging variants of IBV, particularly important to vaccine development for controlling spread within poultry populations.
Assuntos
Vírus da Bronquite Infecciosa , Genética Reversa , Vírus da Bronquite Infecciosa/genética , Genética Reversa/métodos , Animais , Genoma Viral , Infecções por Coronavirus/virologia , Infecções por Coronavirus/veterinária , Plasmídeos/genética , Doenças das Aves Domésticas/virologia , Escherichia coli/genéticaRESUMO
Golden Gate Assembly is a flexible method of DNA assembly and cloning that permits the joining of multiple fragments in a single reaction through predefined connections. The method depends on cutting DNA using a Type IIS restriction enzyme, which cuts outside its recognition site and therefore can generate overhangs of any sequence while separating the recognition site from the generated fragment. By choosing compatible fusion sites, Golden Gate permits the joining of multiple DNA fragments in a defined order in a single reaction. Conventionally, this method has been used to join five to eight fragments in a single assembly round, with yield and accuracy dropping off rapidly for more complex assemblies. Recently, we demonstrated the application of comprehensive measurements of ligation fidelity and bias data using data-optimized assembly design (DAD) to enable a high degree of assembly accuracy for very complex assemblies with the simultaneous joining of as many as 52 fragments in one reaction. Here, we describe methods for applying DAD principles and online tools to evaluate the fidelity of existing fusion site sets and assembly standards, selecting new optimal sets, and adding fusion sites to existing assemblies. We further describe the application of DAD to divide known sequences at optimal points, including designing one-pot assemblies of small genomes. Using the T7 bacteriophage genome as an example, we present a protocol that includes removal of native Type IIS sites (domestication) simultaneously with parts generation by PCR. Finally, we present recommended cycling protocols for assemblies of medium to high complexity (12-36 fragments), methods for producing high-quality parts, examples highlighting the importance of DNA purity and fragment stoichiometric balance for optimal assembly outcomes, and methods for assessing assembly success. © 2023 New England Biolabs, Inc. Current Protocols published by Wiley Periodicals LLC. Basic Protocol 1: Assessing the fidelity of an overhang set using the NEBridge Ligase Fidelity Viewer Basic Protocol 2: Generating a high-fidelity overhang set using the NEBridge GetSet Tool Alternate Protocol 1: Expanding an existing overhang set using the NEBridge GetSet Tool Basic Protocol 3: Dividing a genomic sequence with optimal fusion sites using the NEBridge SplitSet Tool Basic Protocol 4: One-pot Golden Gate Assembly of 12 fragments into a destination plasmid Alternate Protocol 2: One-pot Golden Gate Assembly of 24+ fragments into a destination plasmid Basic Protocol 5: One-pot Golden Gate Assembly of the T7 bacteriophage genome from 12+ parts Support Protocol 1: Generation of high-purity amplicons for assembly Support Protocol 2: Cloning assembly parts into a holding vector Support Protocol 3: Quantifying DNA concentration using a Qubit 4 fluorometer Support Protocol 4: Visualizing large assemblies via TapeStation Support Protocol 5: Validating phage genome assemblies via ONT long-read sequencing.
Assuntos
Bacteriófago T7 , Bacteriófagos , Ciclismo , Enzimas de Restrição do DNA , DomesticaçãoRESUMO
Deoxynucleoside triphosphate (dNTP) triphosphohydrolases (dNTPases) are important enzymes that may perform multiple functions in the cell, including regulating the dNTP pools and contributing to innate immunity against viruses. Among the homologs that are best studied are human sterile alpha motif and HD domain-containing protein 1 (SAMHD1), a tetrameric dNTPase, and the hexameric Escherichia coli dGTPase; however, it is unclear whether these are representative of all dNTPases given their wide distribution throughout life. Here, we investigated a hexameric homolog from the marine bacterium Leeuwenhoekiella blandensis, revealing that it is a dGTPase that is subject to allosteric activation by dATP, specifically. Allosteric regulation mediated solely by dATP represents a novel regulatory feature among dNTPases that may facilitate maintenance of cellular dNTP pools in L. blandensis. We present high-resolution X-ray crystallographic structures (1.80-2.26 Å) in catalytically important conformations as well as cryo-EM structures (2.1-2.7 Å) of the enzyme bound to dGTP and dATP ligands. The structures, the highest resolution cryo-EM structures of any SAMHD1-like dNTPase to date, reveal an intact metal-binding site with the dGTP substrate coordinated to three metal ions. These structural and biochemical data yield insights into the catalytic mechanism and support a conserved catalytic mechanism for the tetrameric and hexameric dNTPase homologs. We conclude that the allosteric activation by dATP appears to rely on structural connectivity between the allosteric and active sites, as opposed to the changes in oligomeric state upon ligand binding used by SAMHD1.
Assuntos
Proteínas Monoméricas de Ligação ao GTP , Regulação Alostérica/fisiologia , Escherichia coli/metabolismo , Flavobacteriaceae , Humanos , Modelos Moleculares , Proteínas Monoméricas de Ligação ao GTP/metabolismo , Proteína 1 com Domínio SAM e Domínio HD/metabolismoRESUMO
Tomographic reconstruction of cryopreserved specimens imaged in an electron microscope followed by extraction and averaging of sub-volumes has been successfully used to derive atomic models of macromolecules in their biological environment. Eliminating biochemical isolation steps required by other techniques, this method opens up the cell to in-situ structural studies. However, the need to compensate for errors in targeting introduced during mechanical navigation of the specimen significantly slows down tomographic data collection thus limiting its practical value. Here, we introduce protocols for tilt-series acquisition and processing that accelerate data collection speed by up to an order of magnitude and improve map resolution compared to existing approaches. We achieve this by using beam-image shift to multiply the number of areas imaged at each stage position, by integrating geometrical constraints during imaging to achieve high precision targeting, and by performing per-tilt astigmatic CTF estimation and data-driven exposure weighting to improve final map resolution. We validated our beam image-shift electron cryo-tomography (BISECT) approach by determining the structure of a low molecular weight target (~300 kDa) at 3.6 Å resolution where density for individual side chains is clearly resolved.
Assuntos
Microscopia Crioeletrônica/métodos , Tomografia com Microscopia Eletrônica/métodos , Processamento de Imagem Assistida por Computador/métodos , Tomografia Computadorizada por Raios X/métodos , Algoritmos , Imageamento Tridimensional/métodos , Substâncias Macromoleculares/química , Substâncias Macromoleculares/ultraestrutura , Tamanho da Partícula , Reprodutibilidade dos TestesRESUMO
Natural product biosynthetic pathways are replete with enzymes repurposed for new catalytic functions. In some modular polyketide synthase (PKS) pathways, a GCN5-related N-acetyltransferase (GNAT)-like enzyme with an additional decarboxylation function initiates biosynthesis. Here, we probe two PKS GNAT-like domains for the dual activities of S-acyl transfer from coenzyme A (CoA) to an acyl carrier protein (ACP) and decarboxylation. The GphF and CurA GNAT-like domains selectively decarboxylate substrates that yield the anticipated pathway starter units. The GphF enzyme lacks detectable acyl transfer activity, and a crystal structure with an isobutyryl-CoA product analog reveals a partially occluded acyltransfer acceptor site. Further analysis indicates that the CurA GNAT-like domain also catalyzes only decarboxylation, and the initial acyl transfer is catalyzed by an unidentified enzyme. Thus, PKS GNAT-like domains are re-classified as GNAT-like decarboxylases. Two other decarboxylases, malonyl-CoA decarboxylase and EryM, reside on distant nodes of the superfamily, illustrating the adaptability of the GNAT fold.
Assuntos
Acetiltransferases/química , Acetiltransferases/metabolismo , Policetídeos/metabolismo , Cristalografia por Raios X , Humanos , Modelos Moleculares , Domínios Proteicos , Dobramento de Proteína , Estrutura Secundária de ProteínaRESUMO
Cahuitamycins are biofilm inhibitors assembled by a convergent nonribosomal peptide synthetase pathway. Previous genetic analysis indicated that a discrete enzyme, CahJ, serves as a gatekeeper for cahuitamycin structural diversification. Here, the CahJ protein was probed structurally and functionally to guide the formation of new analogues by mutasynthetic studies. This analysis enabled the in vivo production of a new cahuitamycin congener through targeted precursor incorporation.
Assuntos
Proteínas de Bactérias/metabolismo , Oligopeptídeos/metabolismo , Peptídeo Sintases/metabolismo , Streptomyces/metabolismo , Proteínas de Bactérias/química , Sítios de Ligação , Vias Biossintéticas , Simulação de Acoplamento Molecular , Oligopeptídeos/química , Peptídeo Sintases/química , Conformação Proteica , Streptomyces/química , Especificidade por SubstratoRESUMO
The unusual feature of a t-butyl group is found in several marine-derived natural products including apratoxin A, a Sec61 inhibitor produced by the cyanobacterium Moorea bouillonii PNG 5-198. Here, we determine that the apratoxin A t-butyl group is formed as a pivaloyl acyl carrier protein (ACP) by AprA, the polyketide synthase (PKS) loading module of the apratoxin A biosynthetic pathway. AprA contains an inactive "pseudo" GCN5-related N-acetyltransferase domain (ΨGNAT) flanked by two methyltransferase domains (MT1 and MT2) that differ distinctly in sequence. Structural, biochemical, and precursor incorporation studies reveal that MT2 catalyzes unusually coupled decarboxylation and methylation reactions to transform dimethylmalonyl-ACP, the product of MT1, to pivaloyl-ACP. Further, pivaloyl-ACP synthesis is primed by the fatty acid synthase malonyl acyltransferase (FabD), which compensates for the ΨGNAT and provides the initial acyl-transfer step to form AprA malonyl-ACP. Additionally, images of AprA from negative stain electron microscopy reveal multiple conformations that may facilitate the individual catalytic steps of the multienzyme module.
Assuntos
Proteínas de Bactérias/metabolismo , Carboxiliases/metabolismo , Depsipeptídeos/biossíntese , Metiltransferases/metabolismo , Enzimas Multifuncionais/metabolismo , Policetídeo Sintases/metabolismo , Proteína de Transporte de Acila/metabolismo , Sequência de Aminoácidos , Proteínas de Bactérias/química , Carboxiliases/química , Domínio Catalítico , Cianobactérias/química , Descarboxilação , Depsipeptídeos/química , Depsipeptídeos/isolamento & purificação , Metilação , Metiltransferases/química , Enzimas Multifuncionais/química , Policetídeo Sintases/química , Especificidade por SubstratoRESUMO
Natural product biosynthetic pathways contain a plethora of enzymatic tools to carry out difficult biosynthetic transformations. Here, we discover an unusual mononuclear iron-dependent methyltransferase that acts in the initiation steps of apratoxin A biosynthesis (AprA MT1). Fe3+-replete AprA MT1 catalyzes one or two methyl transfer reactions on the substrate malonyl-ACP (acyl carrier protein), whereas Co2+, Fe2+, Mn2+, and Ni2+ support only a single methyl transfer. MT1 homologues exist within the "GNAT" (GCN5-related N-acetyltransferase) loading modules of several modular biosynthetic pathways with propionyl, isobutyryl, or pivaloyl starter units. GNAT domains are thought to catalyze decarboxylation of malonyl-CoA and acetyl transfer to a carrier protein. In AprA, the GNAT domain lacks both decarboxylation and acyl transfer activity. A crystal structure of the AprA MT1-GNAT di-domain with bound Mn2+, malonate, and the methyl donor S-adenosylmethionine (SAM) reveals that the malonyl substrate is a bidentate metal ligand, indicating that the metal acts as a Lewis acid to promote methylation of the malonyl α-carbon. The GNAT domain is truncated relative to functional homologues. These results afford an expanded understanding of MT1-GNAT structure and activity and permit the functional annotation of homologous GNAT loading modules both with and without methyltransferases, additionally revealing their rapid evolutionary adaptation in different biosynthetic contexts.
Assuntos
Depsipeptídeos/biossíntese , Ferro/metabolismo , Metiltransferases/metabolismo , Policetídeos/química , Depsipeptídeos/química , Escherichia coli/metabolismo , Regulação Bacteriana da Expressão Gênica , Regulação Enzimológica da Expressão Gênica , Metiltransferases/classificação , Metiltransferases/genética , Modelos Moleculares , Estrutura Molecular , Policetídeos/metabolismo , Conformação Proteica , Domínios ProteicosRESUMO
Polyketide metabolites produced by modular type I polyketide synthases (PKS) acquire their chemical diversity through the variety of catalytic domains within modules of the pathway. Methyltransferases are among the least characterized of the catalytic domains common to PKS systems. We determined the domain boundaries and characterized the activity of a PKS C-methyltransferase (C-MT) from the curacin A biosynthetic pathway. The C-MT catalyzes S-adenosylmethionine-dependent methyl transfer to the α-position of ß-ketoacyl substrates linked to acyl carrier protein (ACP) or a small-molecule analog but does not act on ß-hydroxyacyl substrates or malonyl-ACP. Key catalytic residues conserved in both bacterial and fungal PKS C-MTs were identified in a 2 Å crystal structure and validated biochemically. Analysis of the structure and the sequences bordering the C-MT provides insight into the positioning of this domain within complete PKS modules.
Assuntos
Cianobactérias/enzimologia , Metiltransferases/química , Policetídeo Sintases/química , Domínio Catalítico , Cristalografia por Raios X , Cianobactérias/química , Cianobactérias/metabolismo , Ciclopropanos/metabolismo , Metiltransferases/metabolismo , Modelos Moleculares , Policetídeo Sintases/metabolismo , Conformação Proteica , Tiazóis/metabolismoRESUMO
We show here that computer game players can build high-quality crystal structures. Introduction of a new feature into the computer game Foldit allows players to build and real-space refine structures into electron density maps. To assess the usefulness of this feature, we held a crystallographic model-building competition between trained crystallographers, undergraduate students, Foldit players and automatic model-building algorithms. After removal of disordered residues, a team of Foldit players achieved the most accurate structure. Analysing the target protein of the competition, YPL067C, uncovered a new family of histidine triad proteins apparently involved in the prevention of amyloid toxicity. From this study, we conclude that crystallographers can utilize crowdsourcing to interpret electron density information and to produce structure solutions of the highest quality.