RESUMO
Reproducible and unbiased methods to quantify alveolar structure are important for research on many lung diseases. However, manually estimating alveolar structure through stereology is time consuming and inter-observer variability is high. The objective of this work was to develop and validate a fast, reproducible and accurate (semi-)automatic alternative. A FIJI-macro was designed that automatically segments lung images to binary masks, and counts the number of test points falling on tissue and the number of intersections of the air-tissue interface with a set of test lines. Manual selection remains necessary for the recognition of non-parenchymal tissue and alveolar exudates. Volume density of alveolar septa ([Formula: see text]) and mean linear intercept of the airspaces (Lm) as measured by the macro were compared to theoretical values for 11 artificial test images and to manually counted values for 17 lungs slides using linear regression and Bland-Altman plots. Inter-observer agreement between 3 observers, measuring 8 lungs both manually and automatically, was assessed using intraclass correlation coefficients (ICC). [Formula: see text] and Lm measured by the macro closely approached theoretical values for artificial test images (R2 of 0.9750 and 0.9573 and bias of 0.34% and 8.7%). The macro data in lungs were slightly higher for [Formula: see text] and slightly lower for Lm in comparison to manually counted values (R2 of 0.8262 and 0.8288 and bias of -6.0% and 12.1%). Visually, semi-automatic segmentation was accurate. Most importantly, manually counted [Formula: see text] and Lm had only moderate to good inter-observer agreement (ICC 0.859 and 0.643), but agreements were excellent for semi-automatically counted values (ICC 0.956 and 0.900). This semi-automatic method provides accurate and highly reproducible alveolar morphometry results. Future efforts should focus on refining methods for automatic detection of non-parenchymal tissue or exudates, and for assessment of lung structure on 3D reconstructions of lungs scanned with microCT.
Assuntos
Displasia Broncopulmonar/patologia , Interpretação de Imagem Assistida por Computador/métodos , Alvéolos Pulmonares/patologia , Animais , Displasia Broncopulmonar/diagnóstico por imagem , Modelos Animais de Doenças , Feminino , Técnicas Histológicas/estatística & dados numéricos , Variações Dependentes do Observador , Gravidez , Alvéolos Pulmonares/diagnóstico por imagem , Coelhos , Interpretação de Imagem Radiográfica Assistida por Computador/métodos , Microtomografia por Raio-X/estatística & dados numéricosRESUMO
INTRODUCTION AND HYPOTHESIS: Paramagnetic Fe particles can be added during synthetic mesh production to allow visibility on magnetic resonance imaging. Our aim was to evaluate whether transperineal ultrasound (TPUS) allows visualization, measurement, and characterization of polyvinylidene fluoride (PVDF mesh) containing Fe particles compared with regular polypropylene (PP) meshes used for sacrocolpopexy. METHODS: Women up to 1.5 years after laparoscopic sacrocolpopexy who were implanted with a PP or PVDF mesh underwent clinical examination and 2D, 3D, and 4D TPUS. Acquired volumes were analyzed offline for mesh position at rest and maximal Valsalva and for mesh dimensions and characteristics, with the operator blinded to group assignment. The two groups were compared. RESULTS: There were 17 women in the PP and 25 in the PVDF mesh group, without differences in baseline demographics. None had significant prolapse, recurrence, symptoms, or complications. On TPUS, mesh was visible in all patients both caudally (perineal) and cranially but was more echogenic in the PVDF mesh group. Mesh length from distal to proximal that was visible on TPUS was longer for PVDF mesh, for both anterior and posterior vaginal arms (all P < 0.05), and for mesh above the vaginal apex (P = 0.002). The inferior aspects of the mesh showed areas of double mesh layers, suggesting folding in 80% of women in both groups, without symptoms. CONCLUSIONS: PVDF mesh permits clearer visualization and is seen over a longer stretch on TPUS, with longer visible mesh arms. The latter can be due to differences in operative technique, presence of microparticles, implant textile structure, or patient characteristics.
Assuntos
Imageamento Tridimensional/métodos , Polipropilenos/uso terapêutico , Polivinil/uso terapêutico , Slings Suburetrais , Telas Cirúrgicas , Idoso , Feminino , Compostos Férricos/uso terapêutico , Humanos , Pessoa de Meia-Idade , Prolapso de Órgão Pélvico/cirurgia , Períneo/diagnóstico por imagem , UltrassonografiaRESUMO
BACKGROUND: Sacrocolpopexy (SC) involves suspension of the vaginal vault or cervix to the sacrum using a mesh. Following insertion, the meshes have been observed to have undergone dimensional changes. OBJECTIVE: To quantify dimensional changes of meshes following implantation and characterize their morphology in-vivo. DESIGN SETTING AND PARTICIPANTS: 24 patients underwent SC using PolyVinyliDeneFluoride mesh loaded with Fe3O4 particles. Tailored anterior and posterior mesh flaps were sutured to the respective vaginal walls, uniting at the apex. The posterior flap continued to the sacrum and was attached there. Meshes were visualized on magnetic resonance (MR) imaging at 12 [3-12] (median [range]) months postoperatively and 3D models of the mesh were generated. Dynamic MR sequences were acquired during valsalva to record mesh mobility. OUTCOME MEASURES: The area of the vagina effectively supported by the mesh (Effective Support Area (ESA)) was calculated. The 3D models' wall thickness map was analyzed to identify the locations of mesh folding. Intraclass correlation (ICC) was calculated to test the reliability of the methods. To measure the laxity and flatness of the mesh, the curvature and the ellipticity of the sacral flap were calculated. RESULTS: The ESA calculation methodology had ICC = 0.97. A reduction of 75.49 [61.55-78.67] % (median [IQR]) in area, 47.64 [38.07-59.81] % in anterior flap, and of 23.95 [10.96-27.21] % in the posterior flap was measured. The mesh appeared thicker near its attachment at the sacral promontory (n = 19) and near the vaginal apex (n = 22). The laxity of the mesh was 1.13 [1.10-1.16] and 60.55 [49.76-76.25] % of the sacral flap was flat. We could not reliably measure mesh mobility (ICC = 0.16). CONCLUSION: A methodology for complete 3D characterization of SC meshes using MR images was presented. After implantation, the supported area is much lower than what is prepared prior to implantation. We propose this happened during the surgery itself.
Assuntos
Procedimentos Cirúrgicos em Ginecologia , Imageamento por Ressonância Magnética , Prolapso de Órgão Pélvico/cirurgia , Telas Cirúrgicas , Vagina/cirurgia , Feminino , Humanos , Prolapso de Órgão Pélvico/diagnóstico por imagem , Vagina/diagnóstico por imagemRESUMO
Segmentation of the levator hiatus in ultrasound allows the extraction of biometrics, which are of importance for pelvic floor disorder assessment. We present a fully automatic method using a convolutional neural network (CNN) to outline the levator hiatus in a two-dimensional image extracted from a three-dimensional ultrasound volume. In particular, our method uses a recently developed scaled exponential linear unit (SELU) as a nonlinear self-normalizing activation function, which for the first time has been applied in medical imaging with CNN. SELU has important advantages such as being parameter-free and mini-batch independent, which may help to overcome memory constraints during training. A dataset with 91 images from 35 patients during Valsalva, contraction, and rest, all labeled by three operators, is used for training and evaluation in a leave-one-patient-out cross validation. Results show a median Dice similarity coefficient of 0.90 with an interquartile range of 0.08, with equivalent performance to the three operators (with a Williams' index of 1.03), and outperforming a U-Net architecture without the need for batch normalization. We conclude that the proposed fully automatic method achieved equivalent accuracy in segmenting the pelvic floor levator hiatus compared to a previous semiautomatic approach.
RESUMO
This protocol describes mesh insertion into the rectovaginal septum in sheep using a single vaginal incision technique, with and without the trocar-guided insertion of anchoring arms. Parous sheep underwent the dissection of the rectovaginal septum, followed by the insertion of an implant with or without four anchoring arms, both designed to fit the ovine anatomy. The anchoring arms were put in place using a trocar and an "outside-in" technique. The cranial arms were passed through the obturator, gracilis, and adductor magnus muscles. The caudal arms were fixed near the sacrotuberous ligament, through the coccygeus muscles. This technique allows for the mimicking of surgical procedures performed in women suffering from pelvic organ prolapse. The anatomical spaces and elements are easily identified. The most critical part of the procedure is the insertion of the cranial trocar, which can easily penetrate the peritoneal cavity or the surrounding pelvic organs. This can be avoided by a more extensive retroperitoneal dissection and by guiding the trocar more laterally. This approach is designed only for experimental testing of novel implants in large animal models, as trocar-guided insertion is currently not used clinically.
Assuntos
Prolapso de Órgão Pélvico/cirurgia , Próteses e Implantes , Telas Cirúrgicas , Animais , Modelos Animais de Doenças , Feminino , Prolapso de Órgão Pélvico/fisiopatologia , Ovinos , Gravação em VídeoRESUMO
With advancing population age, pelvic-floor dysfunction (PFD) will affect an increasing number of women. Many of these women wish to maintain active lifestyles, indicating an urgent need for effective strategies to treat or, preferably, prevent the occurrence of PFD. Childbirth and pregnancy have both long been recognized as crucial contributing factors in the pathophysiology of PFD. Vaginal delivery of a child is a serious traumatic event, causing anatomical and functional changes in the pelvic floor. Similar changes to those experienced during childbirth can be found in symptomatic women, often many years after delivery. Thus, women with such PFD symptoms might have incompletely recovered from the trauma caused by vaginal delivery. This hypothesis creates the possibility that preventive measures can be initiated around the time of delivery. Secondary prevention has been shown to be beneficial in patients with many other chronic conditions. The current general consensus is that clinicians should aim to minimize the extent of damage during delivery, and aim to optimize healing processes after delivery, therefore preventing later dysfunction. A substantial amount of research investigating the potential of stem-cell injections as a therapeutic strategy for achieving this purpose is currently ongoing. Data from small animal models have demonstrated positive effects of mesenchymal stem-cell injections on the healing process following simulated vaginal birth injury.
Assuntos
Transplante de Células-Tronco Mesenquimais , Complicações do Trabalho de Parto/prevenção & controle , Distúrbios do Assoalho Pélvico/prevenção & controle , Diafragma da Pelve/lesões , Cuidado Pós-Natal/métodos , Prevenção Secundária/métodos , Feminino , Humanos , Complicações do Trabalho de Parto/etiologia , Distúrbios do Assoalho Pélvico/etiologia , GravidezRESUMO
OBJECTIVE: Vaginal childbirth is believed to be a significant risk factor for the development of pelvic floor dysfunction later in life. Previous studies have explored the use of medical imaging and simulations of childbirth to determine the stretch in the levator ani muscle. A report in 2012 has recorded magnetic resonance images of a live childbirth of a 24 year old woman giving birth vaginally for the second time, using a 1.0 Tesla open, high-field scanner. Our objective was to determine the stretch ratios in the levator muscle using these magnetic resonance images of live childbirth. STUDY DESIGN: Three-dimensional magnetic resonance image sequences were obtained to visualize coronal and axial planes before and after the childbirth. These images were obtained before the expulsion phase without pushing and were used to reconstruct the levator muscle and the fetal head in 3 dimensions. The fetal head was approximated to be an ellipsoid, and it is assumed that its middle section is visible in dynamic magnetic resonance images. Assuming incompressibility, the full deformation field of the fetal head is then calculated. Real-time cine magnetic resonance images were acquired for the during the expulsion phase, occurring over 2 contractions in the midsagittal plane. The levator muscle stretch is estimated using a custom program. The program calculates points of contact between the fetal head ellipsoid and the levator ani muscle model as the head descends down the birth canal and moves them orthogonal to its surface. Circumferential stretch was calculated to represent the extension needed to allow the passage of the fetal head. RESULTS: Starting from a position in the preexpulsion phase, the levator muscle experiences a maximum circumferential stretch of 248% on the posterior-medial portion of the levator ani muscle, as shown in previously published finite element simulations. However, the maximal stretch was notably less than that predicted by finite element models. This is because our baseline 3-dimensional model of the levator muscle is created from images taken shortly before expulsion and thus is already in a stretched state. Furthermore, the finite element models are created from images of a healthy nulliparous woman, while this study uses images from a para 2 woman. CONCLUSION: This study is the first attempt to estimate the stretch in levator ani muscle using magnetic resonance images of a live childbirth. The stretch was significant and the locations corroborate with previous findings of finite element models.
Assuntos
Imageamento por Ressonância Magnética , Parto/fisiologia , Diafragma da Pelve/diagnóstico por imagem , Diafragma da Pelve/fisiologia , Parto Obstétrico , Feminino , Humanos , Imageamento Tridimensional , Gravidez , Adulto JovemRESUMO
BACKGROUND: Pelvic organ prolapse affects half of vaginally parous women. Several animal models are used to study its pathophysiology and treatment. Sheep are interesting because they develop spontaneously prolapse with similar risk factors as women and can be used for vaginal surgery. This study describes ovine pelvis anatomy and compares it to women's pelvis to provide anatomical tools for translational researchers. METHODS: MRI, pelvic dissections, and histology were used for detailed macro- and microscopic analysis of relevant anatomical structures in 6 nulliparous ewes. RESULTS: Although sheep are quadrupeds, the gross and microscopic anatomies are similar to the female pelvis. Principal differences are the shape and its orientation, the absence of the sacrospinous ligament and the internal obturator. The levator ani (except for the puborectalis) and the coccygeus muscle are present, yet the latter is more developed - coinciding with the tail. The dimensions and morphology of the ovine vagina is comparable. The retropubic and the rectovaginal space are accessible transvaginally. There is a wide expression of estrogen receptors with low or absent immunoreactivity in the urethral epithelium, bladder, anus and internal anal sphincter. CONCLUSION: The ovine pelvic floor has many anatomical and ultrastructural similarities to the female pelvic floor.
Assuntos
Cavidade Abdominal/anatomia & histologia , Parede Abdominal/anatomia & histologia , Pelve/anatomia & histologia , Bexiga Urinária/anatomia & histologia , Vagina/anatomia & histologia , Animais , Feminino , Humanos , Imageamento por Ressonância Magnética , Diafragma da Pelve/anatomia & histologia , Prolapso de Órgão Pélvico , OvinosRESUMO
AIM: Fetal skull molding is important for the adaptation of the head to the birth canal during vaginal delivery. Importantly, the fetal head must rotate around the maternal symphysis pubis. The goals of this analysis were to observe a human birth in real-time using an open magnetic resonance imaging (MRI) scanner and describe the fetal head configuration during expulsion. METHODS: Real-time cinematic MRI series (TSE single-shot sequence, TR 1600 ms, TE 150 ms) were acquired from the midsagittal plane of the maternal pelvis during the active second stage of labor at 37 weeks of gestation. Frame-by-frame analyses were performed to measure the frontooccipital diameter (FOD) and distance from the vertex to the base of the fetal skull. RESULTS: During vaginal delivery in an occiput anterior position, the initial FOD was 10.3 cm. When expulsion began, the fetal skull was deformed and elongated, with the FOD increasing to 10.8 cm and 11.2 cm at crowning. In contrast, the distance from the vertex to the base of the skull was reduced from 6.4 cm to 5.6 cm at expulsion. CONCLUSIONS: Fetal head molding is the change in the fetal head due to the forces of labor. The biomechanics of this process are poorly understood. Our visualization of the normal mechanism of late second-stage labor shows that MRI technology can for the first time help define the changes in the diameters of the fetal head during active labor.
Assuntos
Feto/diagnóstico por imagem , Cabeça/diagnóstico por imagem , Segunda Fase do Trabalho de Parto/fisiologia , Imageamento por Ressonância Magnética/métodos , Fenômenos Biomecânicos , Sistemas Computacionais , Feminino , Feto/fisiologia , Cabeça/fisiologia , Humanos , Recém-Nascido , Apresentação no Trabalho de Parto , Masculino , Gravidez , Adulto JovemRESUMO
BACKGROUND AND OBJECTIVE: Immediate post-operative structural changes in implanted synthetic meshes are believed to contribute to graft related complications. Our aim was to observe in vivo dimensional changes at the pore level. METHOD: Two different polyvinylidine fluoride (PVDF) meshes, CICAT and ENDOLAP (Dynamesh, FEG Textiltechnik) were implanted in 18 female Sprague Dawley (n=9/group). The meshes (30×25mm(2)) were overlaid on a full thickness incision (2×1cm(2)) and sutured on the abdominal wall. All animals underwent microCT imaging (res. 35µm/px) at day 1 and 15 postsurgery. A customized procedure was developed to semi-automatically detect the pore centers from the microCT dataset. Horizontal (transverse) and vertical (cranio-caudal) inter-pore distances were then recorded. The overall mesh dimensions were also noted from 3D models generated from in vivo microCT datasets. Inter-pore distances and the overall dimensions from microCT images of the meshes set in agarose gel phantom were used as controls. Mann-Whitney U test was done to check for significant differences. RESULTS: Number of measurable vertical and horizontal inter-pore distances was 56.5(10.5) and 54.5(14.5) [median (IQR)] per animal. At day 1, we observed a 4.3% (CICAT) and 4.6% (ENDOLAP) increase in vertical inter-pore distance when compared to controls (p<0.001, p=0.003, respectively). Measurements fell back to phantom values by day 15 (3.7% and 4.9% decrease compared to day 1, p<0.001 for both). The horizontal inter-pore distances for ENDOLAP increased by 1.4% (p=0.003) during the two weeks period. The overall mesh dimensions did not change significantly day 1 and day 15. The in vivo measurement of the overall mesh dimensions demonstrated a 15.9% reduction in mesh area as compared to that in phantom controls. CONCLUSION: We report for the first time, in vivo changes in pore dimensions of a textile implant. This study clearly demonstrates the dynamic nature of a textile implant during the tissue integration process. For studied PVDF meshes, the process of tissue integration leads to limited but significant reduction over time as observed at the pore level. Remarkably the extent of this reduction does not account for the change in overall mesh dimensions.
Assuntos
Teste de Materiais , Telas Cirúrgicas , Animais , Feminino , Polivinil , Porosidade , Período Pós-Operatório , Ratos , Ratos Sprague-Dawley , Microtomografia por Raio-XRESUMO
OBJECTIVE: Our primary objective was to develop relevant algorithms for quantification of mesh position and 3D shape in magnetic resonance (MR) images. METHODS: In this proof-of-principle study, one patient with severe anterior vaginal wall prolapse was implanted with an MR-visible mesh. High-resolution MR images of the pelvis were acquired 6 weeks and 8 months postsurgery. 3D models were created using semiautomatic segmentation techniques. Conformational changes were recorded quantitatively using part-comparison analysis. An ellipticity measure is proposed to record longitudinal conformational changes in the mesh arms. The surface that is the effective reinforcement provided by the mesh is calculated using a novel methodology. The area of this surface is the effective support area (ESA). RESULTS: MR-visible mesh was clearly outlined in the images, which allowed us to longitudinally quantify mesh configuration between 6 weeks and 8 months after implantation. No significant changes were found in mesh position, effective support area, conformation of the mesh's main body, and arm length during the period of observation. Ellipticity profiles show longitudinal conformational changes in posterior arms. CONCLUSIONS: This paper proposes novel methodologies for a systematic 3D assessment of the position and morphology of MR-visible meshes. A novel semiautomatic tool was developed to calculate the effective area of support provided by the mesh, a potentially clinically important parameter.
Assuntos
Imageamento Tridimensional , Imageamento por Ressonância Magnética , Telas Cirúrgicas , Algoritmos , Feminino , Humanos , Fluxo de TrabalhoRESUMO
INTRODUCTION AND HYPOTHESIS: Our aim was to analyze the apparent contraction of meshes in vivo after abdominal wall reconstruction and evaluate histological and biomechanical properties after explantation. METHODS: Nine New Zealand female rabbits underwent repair of two full-thickness 25 × 30-mm midline defects in the upper and lower parts of the abdomen. These were primarily overlaid by 35 × 40-mm implants of a polyvinylidene fluoride (PVDF) DynaMesh (n = 6) or polypropylene meshes Ultrapro (n = 6) and Marlex (n = 6). Edges of the meshes were secured with iron(II,III) oxide (Fe(3)O(4))-loaded PVDF sutures. Magnetic resonance images (MRIs) were taken at days 2, 30 and 90 after implantation. The perimeter of the mesh was traced using a 3D spline curve. The apparent surface area or the area within the PVDF sutures was compared with the initial size using the one-sample t test. A two-way repeat analysis of variance (ANOVA) was used to compare the apparent surface area over time and between groups. RESULTS: PVDF meshes and sutures with Fe(3)O(4) could be well visualized on MRI. DynaMesh and Marlex each had a 17 % decrease in apparent surface area by day 2 (p < 0.001 and p = 0.001), respectively, which persisted after day 90. Whereas there was a decrease in apparent surface area in Ultrapro, it did not reach significance until day 90 (p = 0.01). Overall, the apparent surface area decreased 21 % in all meshes by day 90. No differences in histological or biomechanical properties were observed at day 90. CONCLUSIONS: There was a reduction in the apparent surface area between implantation and day 2, indicating that most mesh deformation occurs prior to tissue in-growth.
Assuntos
Parede Abdominal/cirurgia , Imageamento por Ressonância Magnética , Telas Cirúrgicas , Animais , Falha de Equipamento , Feminino , Teste de Materiais , Polipropilenos , Polivinil , Coelhos , SuturasRESUMO
Convection-enhanced delivery (CED) is a promising technique to deliver large molecular weight drugs to the human brain for treatment of Parkinson's, Alzheimer's, or brain tumors. Researchers have used agarose gels to study mechanisms of agent transport in soft tissues like brain due to its similar mechanical and transport properties. However, inexpensive quantitative techniques to precisely measure achieved agent distribution in agarose gel phantoms during CED are missing. Such precise measurements of concentration distribution are needed to optimize drug delivery. An optical experimental method to accurately quantify agent concentration in agarose is presented. A novel geometry correction algorithm is used to determine real concentrations from observable light intensities captured by a digital camera. We demonstrate the technique in dye infusion experiments that provide cylindrical and spherical distributions when infusing with porous membrane and conventional single-port catheters, respectively. This optical method incorporates important parameters, such as optimum camera exposure, captured camera intensity calibration, and use of collimated light source for maximum precision. We compare experimental results with numerical solutions to the convection diffusion equation. The solutions of convection-diffusion equations in the cylindrical and spherical domains were found to match the experimental data obtained by geometry correction algorithm.