Performance investigations for sustainability assessment of Hastelloy C-276 under different machining environments.

Hastelloy is categorized as difficult to cut superalloy widely used in aerospace, nuclear reactor components and chemical industry because of its magnificent strength and higher heat efficiency. Since, the machining of this material is quite difficult and hence suitable cooling systems are required to achieve sustainable manufacturing goals. The present investigation has been focused on the machining performance and sustainability assessment of turning Hastelloy C-276 in dry, flood and minimum quantity lubrication (MQL) environments. Taguchi L-9 array has been utilized to conduct and record the experimental output along with TOPSIS approach to evaluate the sustainability. The output responses viz. cutting forces, surface roughness, cutting temperature, energy consumption and carbon emission have been recorded at various levels of input variables. The experimental results revealed that MQL has minimized the cutting forces, surface roughness and temperature by margin of 20-38%. Likewise, energy expenditure and carbon emission was declined by 9-27% respectively compared to other conditions. Sustainability analysis explored best performance index during equal weightage criteria at 125 m/min, 0.246 and 0.8 mm doc under MQL. However, implementing assigned weightage system evaluated best condition for dry machining as 88 m/min and 0.246 mm/rev having same doc. SEM analysis of insert reported mainly abrasion and adhesion type of tool wear at all parametric range and machining conditions.

Bioinoculants as mitigators of multiple stresses: A ray of hope for agriculture in the darkness of climate change.

Plant encounters various biotic and abiotic stresses, that affect agricultural productivity and reduce farmer's income especially under changing global climate. These environmental stresses can advance plant senescence by inducing osmotic stress, nutrient stress, hormonal imbalance, production of oxygen radicals, and ion toxicity, etc. Additionally, these stresses are not limited to plant health but also deteriorate soil health by affecting the microbial diversity of soil. To tackle this global delinquent of agriculture, several methods are suggested to ameliorate the negative effect of different types of stresses, the application of beneficial microorganisms or bioinoculants is one of them. Beneficial microorganisms that are used as bioinoculants not only facilitate plant growth by fulfilling the nutrient requirements but also assist the plant to withstand these stresses. These microorganisms produce certain chemicals such as 1-aminocyclopropane-1-carboxylate (ACC) deaminase, phytohormones, antioxidants, extracellular polysaccharide (EPS), siderophores, antibiotics, and volatile organic compounds (VOCs), etc. which help the plants to mitigate various stresses. Besides, these microbes also activate plant defence responses. Thus, these bioinoculants can effectively replace chemical inputs to supplement nutrient requirements and mitigation of multiple stresses in plants.

Experimental Investigation and Performance Optimization during Machining of Hastelloy C-276 Using Green Lubricants.

Smart manufacturing is the demand of industry 4.0, in which the mass production of difficult-to-cut materials is of great concern to fulfil the goal of sustainable machining. Presently, the machining of superalloy is of upmost interest because of its wide application. However, the limited data on the turning of Hastelloy C-276 highlights its challenges during processing. Hence, the machining performance of superalloy considering surface quality, thermal aspects and chip reduction coefficient was examined with minimum quantity lubrication of several oils to address the sustainable development goal (SDG-12). The output responses were optimized through response surface methodology along with analysis of variance. The research exhibited that the output responses were dominated by cutting speed and feed rate having a percentage benefaction of 24.26% and 60%, respectively, whilst the depth of cut and lubricant type have an influence of 10-12%. No major difference in temperature range was reported during the different lubrication conditions. However, a substantial variation in surface roughness and the chip reduction coefficient was revealed. The percentage error evaluated in surface roughness, temperature and chip reduction coefficient was less than 5%, along with an overall desirability of 0.88, describing the usefulness of the model used. The SEM micrograph indicated a loss of coating, nose and flank wear during all lubrication conditions. Lastly, incorporating a circular economy has reduced the economic, ecological and environmental burden.

Radial EBUS-Guided Cryobiopsy of Peripheral Lung Lesions With Flexible Bronchoscopy Without Using Guide-Sheath.

BACKGROUND: A guide-sheath (GS) is conventionally used as a conduit for biopsy forceps under the guidance of radial endobronchial ultrasound (REBUS) for sampling the peripheral pulmonary lesions (PPLs). As compared with forceps, the cryoprobe has the advantage of obtaining larger samples. There is a paucity of literature on the use of cryobiopsy for PPL. We evaluated the diagnostic yield and safety of the REBUS-guided cryobiopsy (REBUS-CB) without using GS for the diagnosis of PPL. METHODS: We retrospectively analyzed the database of 126 patients with PPL between November 2015 and December 2019. The REBUS-CB was performed using a flexible bronchoscopy without GS. Multidisciplinary consensus diagnostic yield was determined and procedural complications were recorded. RESULTS: The histopathologic diagnosis by REBUS-CB, which is the primary objective of the study was obtained in 99 (78.6%) of total 126 cases. Yield was significantly higher in central lesions as compared to adjacent lesions visualized by the REBUS probe (81.4% versus 53.8%, P=0.021) but not significantly different between large (≥30 mm) and small (<30 mm) lesions (81.6% versus 71.8%, P=0.214). The average largest diameter of biopsy specimens was 6.9 mm (range 1-12, SD 2.132). We witnessed moderate bleeding in 7 (5.6%) and post procedure hypoxic respiratory failure in 4 (3.2%) cases which could be managed without escalation of care. CONCLUSION: The REBUS-CB from peripheral lung lesions are feasible even without using GS and significantly large samples can be obtained.

Safety and diagnostic yield of transbronchial lung cryobiopsy by flexible bronchoscopy using laryngeal mask airway in diffuse and localized peripheral lung diseases: A single-center retrospective analysis of 326 cases.

BACKGROUND: Intubation with either an endotracheal tube or a rigid bronchoscope is generally preferred to provide airway protection as well as to manage unpredictable complications during transbronchial lung cryobiopsy (TBLC). The laryngeal mask airway has been described as a safe and convenient tool for airway control during bronchoscopy. AIMS AND OBJECTIVES: In this study, we evaluated the safety and outcome of using a laryngeal mask airway (LMA) as a conduit for performing TBLC by flexible video bronchoscopy (FB). METHODS: We retrospectively analyzed the database of the patients who underwent TBLC between November 2015 and September 2019. The procedure was performed using FB through LMA under general anesthesia. Prophylactic occlusion balloon was routinely used starting January 2017 onwards. Radial endobronchial ultrasound (R-EBUS) guidance was used for TBLC in the localized lung lesions when deemed necessary. Multidisciplinary consensus diagnostic yield was determined and periprocedural complications were recorded. RESULTS: A total of 326 patients were analysed. The overall diagnostic yield was 81.60% (266/326) which included a positive yield of 82.98% (161/194) in patients with diffuse lung disease and 79.54% (105/132) in patients with localized disease. Serious bleeding complication occurred in 3 (0.92%) cases. Pneumothorax was encountered in 8 (2.45%) cases. A total of 9 (2.76%) cases had at least 1 major complication. CONCLUSION: This study demonstrates that the use of LMA during TBLC by flexible bronchoscopy allows for a convenient port of entry, adequate airway support and effective endoscopic management of intrabronchial haemorrhage especially with the use of occlusion balloon.

A Case Report of Paravertebral Block: A Safe Alternative for Microdiscectomy in a Pregnant Patient.

Nonobstetric surgery during pregnancy is common. Administration of safe anesthesia to a pregnant patient, while minimizing its side effects on the fetus, is a major challenge for the anesthesiologist. Both general anesthesia and central neuraxial block are associated with risks during early pregnancy. Regional nerve blocks are being explored as possible alternatives whenever feasible. This report emphasizes the usefulness of ultrasound-guided, modified bilateral paravertebral block in a first-trimester pregnant patient undergoing microdiscectomy for cauda equina syndrome.