GuLF DREAM: A Model to Estimate Dermal Exposure Among Oil Spill Response and Clean-up Workers.

Tens of thousands of individuals performed oil spill response and clean-up (OSRC) activities following the 'Deepwater Horizon' oil drilling rig explosion in 2010. Many were exposed to oil residues and dispersants. The US National Institute of Environmental Health Sciences assembled a cohort of nearly 33 000 workers to investigate potential adverse health effects of oil spill exposures. Estimates of dermal and inhalation exposure are required for those individuals. Ambient breathing-zone measurements taken at the time of the spill were used to estimate inhalation exposures for participants in the GuLF STUDY (Gulf Long-term Follow-up Study), but no dermal measurements were collected. Consequently, a modelling approach was used to estimate dermal exposures. We sought to modify DREAM (DeRmal Exposure Assessment Method) to optimize the model for assessing exposure to various oil spill-related substances and to incorporate advances in dermal exposure research. Each DREAM parameter was reviewed in the context of literature published since 2000 and modified where appropriate. To reflect the environment in which the OSRC work took place, the model treatment of evaporation was expanded to include vapour pressure and wind speed, and the effect of seawater on exposure was added. The modified model is called GuLF DREAM and exposure is estimated in GuLF DREAM units (GDU). An external validation to assess the performance of the model for oils, tars, and fuels was conducted using available published dermal wipe measurements of heavy fuel oil (HFO) and dermal hand wash measurements of asphalt. Overall, measured exposures had moderate correlations with GDU estimates (r = 0.59) with specific correlations of -0.48 for HFO and 0.68 for asphalt. The GuLF DREAM model described in this article has been used to generate dermal exposure estimates for the GuLF STUDY. Many of the updates made were generic, so the updated model may be useful for other dermal exposure scenarios.

Indoor Exposure to Selected Air Pollutants in the Home Environment: A Systematic Review.

(1) Background: There is increasing awareness that the quality of the indoor environment affects our health and well-being. Indoor air quality (IAQ) in particular has an impact on multiple health outcomes, including respiratory and cardiovascular illness, allergic symptoms, cancers, and premature mortality. (2) Methods: We carried out a global systematic literature review on indoor exposure to selected air pollutants associated with adverse health effects, and related household characteristics, seasonal influences and occupancy patterns. We screened records from six bibliographic databases: ABI/INFORM, Environment Abstracts, Pollution Abstracts, PubMed, ProQuest Biological and Health Professional, and Scopus. (3) Results: Information on indoor exposure levels and determinants, emission sources, and associated health effects was extracted from 141 studies from 29 countries. The most-studied pollutants were particulate matter (PM2.5 and PM10); nitrogen dioxide (NO2); volatile organic compounds (VOCs) including benzene, toluene, xylenes and formaldehyde; and polycyclic aromatic hydrocarbons (PAHs) including naphthalene. Identified indoor PM2.5 sources include smoking, cooking, heating, use of incense, candles, and insecticides, while cleaning, housework, presence of pets and movement of people were the main sources of coarse particles. Outdoor air is a major PM2.5 source in rooms with natural ventilation in roadside households. Major sources of NO2 indoors are unvented gas heaters and cookers. Predictors of indoor NO2 are ventilation, season, and outdoor NO2 levels. VOCs are emitted from a wide range of indoor and outdoor sources, including smoking, solvent use, renovations, and household products. Formaldehyde levels are higher in newer houses and in the presence of new furniture, while PAH levels are higher in smoking households. High indoor particulate matter, NO2 and VOC levels were typically associated with respiratory symptoms, particularly asthma symptoms in children. (4) Conclusions: Household characteristics and occupant activities play a large role in indoor exposure, particularly cigarette smoking for PM2.5, gas appliances for NO2, and household products for VOCs and PAHs. Home location near high-traffic-density roads, redecoration, and small house size contribute to high indoor air pollution. In most studies, air exchange rates are negatively associated with indoor air pollution. These findings can inform interventions aiming to improve IAQ in residential properties in a variety of settings.

Biomonitoring for Occupational Exposure to Diisocyanates: A Systematic Review.

Diisocyanates are a group of chemicals that are widely used in occupational settings. They are known to induce various health effects, including skin- and respiratory tract sensitization resulting in allergic dermatitis and asthma. Exposure to diisocyanates has been studied in the past decades by using different types of biomonitoring markers and matrices. The aim of this review as part of the HBM4EU project was to assess: (i) which biomarkers and matrices have been used for biomonitoring diisocyanates and what are their strengths and limitations; (ii) what are (current) biomonitoring levels of the major diisocyanates (and metabolites) in workers; and (iii) to characterize potential research gaps. For this purpose we conducted a systematic literature search for the time period 2000-end 2018, thereby focussing on three types of diisocyanates which account for the vast majority of the total isocyanate market volume: hexamethylene diisocyanate (HDI), toluene diisocyanate (TDI), and 4,4'-methylenediphenyl diisocyanate (MDI). A total of 28 publications were identified which fulfilled the review inclusion criteria. The majority of these studies (93%) investigated the corresponding diamines in either urine or plasma, but adducts have also been investigated by several research groups. Studies on HDI were mostly in the motor vehicle repair industry [with urinary hexamethylene diamine result ranging from 0.03 to 146.5 µmol mol-1 creatinine]. For TDI, there is mostly data on foam production [results for urinary toluene diamine ranging from ~0.01 to 97 µmol mol-1 creatinine] whereas the available MDI data are mainly from the polyurethane industry (results for methylenediphenyl diamine range from 0.01 to 32.7 µmol mol-1 creatinine). About half of the studies published were prior to 2010 hence might not reflect current workplace exposure. There is large variability within and between studies and across sectors which could be potentially explained by several factors including worker or workplace variability, short half-lives of biomarkers, and differences in sampling strategies and analytical techniques. We identified several research gaps which could further be taken into account when studying diisocyanates biomonitoring levels: (i) the development of specific biomarkers is promising (e.g. to study oligomers of HDI which have been largely neglected to date) but needs more research before they can be widely applied, (ii) since analytical methods differ between studies a more uniform approach would make comparisons between studies easier, and (iii) dermal absorption seems a possible exposure route and needs to be further investigated. The use of MDI, TDI, and HDI has been recently proposed to be restricted in the European Union unless specific conditions for workers' training and risk management measures apply. This review has highlighted the need for a harmonized approach to establishing a baseline against which the success of the restriction can be evaluated.

The effectiveness of respiratory protection worn by communities to protect from volcanic ash inhalation. Part II: Total inward leakage tests.

Inhalation of ash can be of great concern for affected communities, during and after volcanic eruptions. Governmental and humanitarian agencies recommend and distribute a variety of respiratory protection (RP), most commonly surgical masks. However, there is currently no evidence on how effective such masks are in protecting wearers from volcanic ash. In Part I of this study (Mueller et al., 2018), we assessed the filtration efficiency (FE) of 17 materials from different forms of RP against volcanic ash and a surrogate, low-toxicity dust, Aloxite. Based on those results, we now present the findings from a volunteer simulation study to test the effect of facial fit through assessment of Total Inward Leakage (TIL). Four different disposable RP types that demonstrated very high median FE (≥96% for Aloxite; ≥89% for volcanic ash) were tested without provision of training on fit. These were an industry-certified mask (N95-equiv.); a surgical mask from Japan designed to filter PM2.5; a flat-fold basic mask from Indonesia; and a standard surgical mask from Mexico, which was also tested with an added medical bandage on top, as an additional intervention to improve fit. Ten volunteers (6 female, 4 male) were recruited. Each RP type was worn by volunteers under two different conditions simulating cleaning-up activities during/after volcanic ashfall. Each activity lasted 10 min and two repeats were completed for each RP type per activity. Dust (as PM2.5) concentration inside and outside the mask was measured with two TSI SidePak aerosol monitors (Models AM510 and AM520, TSI, Minnesota, USA) to calculate TIL. A questionnaire was administered after each test to collect perceptions of fit, comfort, protection and breathability. The best-performing RP type, across both activities, was the industry-certified N95-equiv. mask with 9% mean TIL. The standard surgical mask and the basic flat-fold mask both performed worst (35% TIL). With the additional bandage intervention, the surgical mask mean TIL improved to 24%. The PM2.5 surgical mask performed similarly, with 22% TIL. The N95-equiv. mask was perceived to provide the best protection, but was also perceived as being uncomfortable and more difficult to breathe through. This study provides a first objective evidence base for the effectiveness of a selection of RP types typically worn around the world during volcanic crises. The findings will help agencies to make informed decisions on the procurement and distribution of RP in future eruptions.

Effectiveness of face masks used to protect Beijing residents against particulate air pollution.

OBJECTIVES: Many residents in Beijing use disposable face masks in an attempt to protect their health from high particulate matter (PM) concentrations. Retail masks may be certified to local or international standards, but their real-life performance may not confer the exposure reduction potential that is marketed. This study aimed to evaluate the effectiveness of a range of face masks that are commercially available in China. METHODS: Nine masks claiming protection against fine PM (PM2.5) were purchased from consumer outlets in Beijing. The masks' filtration efficiency was tested by drawing airborne diesel exhaust through a section of the material and measuring the PM2.5 and black carbon (BC) concentrations upstream and downstream of the filtering medium. Four masks were selected for testing on volunteers. Volunteers were exposed to diesel exhaust inside an experimental chamber while performing sedentary tasks and active tasks. BC concentrations were continuously monitored inside and outside the mask. RESULTS: The mean per cent penetration for each mask material ranged from 0.26% to 29%, depending on the flow rate and mask material. In the volunteer tests, the average total inward leakage (TIL) of BC ranged from 3% to 68% in the sedentary tests and from 7% to 66% in the active tests. Only one mask type tested showed an average TIL of less than 10%, under both test conditions. CONCLUSIONS: Many commercially available face masks may not provide adequate protection, primarily due to poor facial fit. Our results indicate that further attention should be given to mask design and providing evidence-based guidance to consumers.

Mortality Among Hardmetal Production Workers: UK Cohort and Nested Case-Control Studies.

OBJECTIVE: The aim of this study was to characterize the mortality at two hardmetal production factories in the United Kingdom as part of an international study. METHODS: Standardized mortality ratios (SMRs) were calculated on the basis of mortality rates for England and Wales, and local rates. A nested case-control study of lung cancer was undertaken. RESULTS: The cohort comprised 1538 workers, with tracing complete for 94.4%. All-cause mortality was statistically significantly low for all cancers and nonmalignant respiratory disease, and for lung cancer was nonsignificantly low. The SMR for lung cancer for maintenance workers was elevated, based on only six deaths. The odds ratio for lung cancer per year of exposure to hardmetal was 0.93 (0.76 to 1.13). CONCLUSIONS: In this small study, there is no evidence to support that working in the UK hardmetal manufacturing industry increased mortality from any cause including lung cancer.

Mortality Among Hardmetal Production Workers: Occupational Exposures.

OBJECTIVE: To generate quantitative exposure estimates for use in retrospective occupational cohort mortality studies of the hardmetal industry. METHODS: Job-exposure matrices (JEMs) were constructed for cobalt, tungsten, and nickel over the time period 1952 to 2014. The JEMs consisted of job class categories, based on job titles and processes performed, and exposure estimates calculated from available company industrial hygiene measurements. RESULTS: Exposure intervals of one-half order magnitude were established for all three agents. Eight job classes had significantly decreasing time trends for cobalt exposure; no significant time trends were detected for tungsten or nickel exposures. CONCLUSIONS: The levels of exposures determined for this study were similar to or lower than those previously reported for the hardmetal industry during the 1952 to 2014 study period.

Occupational dermal exposure to nanoparticles and nano-enabled products: Part 2, exploration of exposure processes and methods of assessment.

Over the past decade, the primary focus of nanotoxicology and nanoenvironmental health and safety efforts has been largely on inhalation exposure to engineered nanomaterials, at the production stage, and much less on considering risks along the life cycle of nano-enabled products. Dermal exposure to nanomaterials and its health impact has been studied to a much lesser extent, and mostly in the context of intentional exposure to nano-enabled products such as in nanomedicine, cosmetics and personal care products. How concerning is dermal exposure to such nanoparticles in the context of occupational exposures? When and how should we measure it? In the first of a series of two papers (Larese Filon et al., 2016), we focused our attention on identifying conditions or situations, i.e. a combination of nanoparticle physico-chemical properties, skin barrier integrity, and occupations with high prevalence of skin disease, which deserve further investigation. This second paper focuses on the broad question of dermal exposure assessment to nanoparticles and attempts to give an overview of the mechanisms of occupational dermal exposure to nanoparticles and nano-enabled products and explores feasibility and adequacy of various methods of quantifying dermal exposure to NOAA. We provide here a conceptual framework for screening, prioritization, and assessment of dermal exposure to NOAA in occupational settings, and integrate it into a proposed framework for risk assessment.

Occupational dermal exposure to nanoparticles and nano-enabled products: Part I-Factors affecting skin absorption.

The paper reviews and critically assesses the evidence on the relevance of various skin uptake pathways for engineered nanoparticles, nano-objects, their agglomerates and aggregates (NOAA). It focuses especially in occupational settings, in the context of nanotoxicology, risk assessment, occupational medicine, medical/epidemiological surveillance efforts, and the development of relevant exposure assessment strategies. Skin uptake of nanoparticles is presented in the context of local and systemic health effects, especially contact dermatitis, skin barrier integrity, physico-chemical properties of NOAA, and predisposing risk factors, such as stratum corneum disruption due to occupational co-exposure to chemicals, and the presence of occupational skin diseases. Attention should be given to: (1) Metal NOAA, since the potential release of ions may induce local skin effects (e.g. irritation and contact dermatitis) and absorption of toxic or sensitizing metals; (2) NOAA with metal catalytic residue, since potential release of ions may also induce local skin effects and absorption of toxic metals; (3) rigid NOAA smaller than 45nm that can penetrate and permeate the skin; (4) non rigid or flexible NOAA, where due to their flexibility liposomes and micelles can penetrate and permeate the intact skin; (5) impaired skin condition of exposed workers. Furthermore, we outline possible situations where health surveillance could be appropriate where there is NOAA occupational skin exposures, e.g. when working with nanoparticles made of sensitizer metals, NOAA containing sensitizer impurities, and/or in occupations with a high prevalence of disrupted skin barrier integrity. The paper furthermore recommends a stepwise approach to evaluate risk related to NOAA to be applied in occupational exposure and risk assessment, and discusses implications related to health surveillance, labelling, and risk communication.

Mortality of a cohort of workers in Great Britain with blood lead measurements.

OBJECTIVES: We examined the mortality of a historic cohort of workers in Great Britain with measured blood lead levels (BLLs). METHODS: SMRs were calculated with the population of Great Britain as the external comparator. Trends in mortality with mean and maximum BLLs and assessed lead exposure were examined using Cox regression. RESULTS: Mean follow-up length among the 9122 study participants was 29.2 years and 3466 deaths occurred. For all causes and all malignant neoplasms, the SMRs were statistically significantly raised. For disease groups of a priori interest, the SMR was significantly raised for lung cancer but not for stomach, brain, kidney, bladder or oesophageal cancers. The SMR was not increased for non-malignant kidney disease but was borderline significantly increased for circulatory diseases, for ischaemic heart disease (IHD) and cerebrovascular disease (CVD). No significant trends with exposure were observed for the cancers of interest, but for circulatory diseases and IHD, there was a statistically significant trend for increasing HR with mean and maximum BLLs. CONCLUSIONS: This study found an excess of lung cancer, although the risk was not clearly associated with increasing BLLs. It also found marginally significant excesses of IHD and CVD, the former being related to mean and maximum BLLs. The finding for IHD may have been due to lead, but could also have been due to other dust exposure associated with lead exposure and possibly tobacco smoking. Further work is required to clarify this and the carcinogenicity of lead.

Validation and comparison of two sampling methods to assess dermal exposure to drilling fluids and crude oil.

Dermal exposure to drilling fluids and crude oil is an exposure route of concern. However, there have been no published studies describing sampling methods or reporting dermal exposure measurements. We describe a study that aimed to evaluate a wipe sampling method to assess dermal exposure to an oil-based drilling fluid and crude oil, as well as to investigate the feasibility of using an interception cotton glove sampler for exposure on the hands/wrists. A direct comparison of the wipe and interception methods was also completed using pigs' trotters as a surrogate for human skin and a direct surface contact exposure scenario. Overall, acceptable recovery and sampling efficiencies were reported for both methods, and both methods had satisfactory storage stability at 1 and 7 days, although there appeared to be some loss over 14 days. The methods' comparison study revealed significantly higher removal of both fluids from the metal surface with the glove samples compared with the wipe samples (on average 2.5 times higher). Both evaluated sampling methods were found to be suitable for assessing dermal exposure to oil-based drilling fluids and crude oil; however, the comparison study clearly illustrates that glove samplers may overestimate the amount of fluid transferred to the skin. Further comparison of the two dermal sampling methods using additional exposure situations such as immersion or deposition, as well as a field evaluation, is warranted to confirm their appropriateness and suitability in the working environment.

Cancer risk among tetrafluoroethylene synthesis and polymerization workers.

Tetrafluoroethylene (TFE), a compound used for the production of fluorinated polymers including polytetrafluoroethylene, increases the incidence of liver and kidney cancers and leukemia in rats and mice. This is the first time the cancer risk in humans has been explored comprehensively in a cohort mortality study (1950-2008) that included all polytetrafluoroethylene production sites in Europe and North America at the time it was initiated. A job-exposure matrix (1950-2002) was developed for TFE and ammonium perfluoro-octanoate, a chemical used in the polymerization process. National reference rates were used to calculate standardized mortality ratios (SMRs) and 95% confidence intervals. Among 4,773 workers ever exposed to TFE, we found a lower rate of death from most causes, as well as increased risks for cancer of the liver (SMR = 1.27; 95% confidence interval: 0.55, 2.51; 8 deaths) and kidney (SMR = 1.44; 95% confidence interval: 0.69, 2.65; 10 deaths) and for leukemia (SMR = 1.48; 95% confidence interval: 0.77, 2.59; 12 deaths). A nonsignificant upward trend (P = 0.24) by cumulative exposure to TFE was observed for liver cancer. TFE and ammonium perfluoro-octanoate exposures were highly correlated, and therefore their separate effects could not be disentangled. This pattern of findings narrows the range of uncertainty on potential TFE carcinogenicity but cannot conclusively confirm or refute the hypothesis that TFE is carcinogenic to humans.

Exposure assessment of tetrafluoroethylene and ammonium perfluorooctanoate 1951-2002.

OBJECTIVES: To develop a method to reconstruct exposure to tetrafluoroethylene (TFE) and ammonium perfluorooctanoate (APFO) in plants producing polytetrafluoroethylene (PTFE) in the absence of suitable objective measurements. These data were used to inform an epidemiological study being carried out to investigate possible risks in workers employed in the manufacture of PTFE and to study trends in exposure over time. METHODS: For each plant, detailed descriptions of all occupational titles, including tasks and changes over time, were obtained during semi-structured interviews with key plant personnel. A semi-quantitative assessment method was used to assess inhalation exposure to TFE and inhalation plus dermal exposure to APFO. Temporal trends in exposure to TFE and APFO were investigated. RESULTS: In each plant the highest exposures for both TFE and APFO occurred in the polymerisation area. Due to the introduction of control measures, increasing process automation and other improvements, exposures generally decreased over time. In the polymerisation area, the annual decline in exposure to TFE varied by plant from 3.8 to 5.7% and for APFO from 2.2 to 5.5%. CONCLUSIONS: A simple method for assessing exposure was developed which used detailed process information and job descriptions to estimate average annual TFE and APFO exposure on an arbitrary semi-quantitative scale. These semi-quantitative estimates are sufficient to identify relative differences in exposure for the epidemiological study and should good data become available, they could be used to provide quantitative estimates for all plants across the whole period of operation.

Biological monitoring of pesticide exposures in residents living near agricultural land.

BACKGROUND: There is currently a lack of reliable information on the exposures of residents and bystanders to pesticides in the UK. Previous research has shown that the methods currently used for assessing pesticide exposure for regulatory purposes are appropriate for farm workers 1. However, there were indications that the exposures of bystanders may sometimes be underestimated. The previous study did not collect data for residents. Therefore, this study aims to collect measurements to determine if the current methods and tools are appropriate for assessing pesticide exposure for residents living near agricultural fields. METHODS/DESIGN: The study will recruit owners of farms and orchards (hereafter both will be referred to as farms) that spray their agricultural crops with certain specified pesticides, and which have residential areas in close proximity to these fields. Recruited farms will be asked to provide details of their pesticide usage throughout the spray season. Informed consenting residents (adults (18 years and over) and children (aged 4-12 years)) will be asked to provide urine samples and accompanying activity diaries during the spraying season and in addition for a limited number of weeks before/after the spray season to allow background pesticide metabolite levels to be determined. Selected urine samples will be analysed for the pesticide metabolites of interest. Statistical analysis and mathematical modelling will use the laboratory results, along with the additional data collected from the farmers and residents, to determine systemic exposure levels amongst residents. Surveys will be carried out in selected areas of the United Kingdom over two years (2011 and 2012), covering two spraying seasons and the time between the spraying seasons. DISCUSSION: The described study protocol was implemented for the sample and data collection procedures carried out in 2011. Based on experience to date, no major changes to the protocol are anticipated for the 2012 spray season although the pesticides and regional areas for inclusion in 2012 are still to be confirmed.

Refinement and validation of an exposure model for the pharmaceutical industry.

OBJECTIVES: Assessment of worker's exposure is becoming increasingly critical in the pharmaceutical industry as drugs of higher potency are being manufactured. The batch nature of operations often makes it difficult to obtain sufficient numbers of exposure measurements and occupational exposure models may be useful tools in the exposure assessment process. This paper aims to describe further refinement and validation of an existing deterministic occupational exposure model to predict airborne exposure of workers in this industry. METHODS: Workplace exposure assessment data (n = 381) containing all the contextual information required for the exposure model were collated from a multinational pharmaceutical company. The measured exposure levels ranged from 5 × 10⁻7 to 200 mg m⁻³ for largely task based samples, and included a range of handling activities, local control measures and abnormal operating conditions. Model input parameters for local control measures and handling activities were refined to reflect pharmaceutical situations. RESULTS: The refined exposure model resulted in good correlations between the log-transformed model predictions and the actual measured data for the overall dataset (r(s) = 0.61, n = 381, p < 0.001) and at scenario level (r(s) = 0.69, n = 48, p < 0.001). The model overestimated scenarios with measured exposure levels < 0.1 mg m⁻³ (r(s) = 0.69, bias = 0.71, n = 46, p < 0.001), and underestimated scenarios with higher measured concentrations ( > 0.1 mg m⁻³) (r(s) = 0.59, bias = -4.9, n = 33, p < 0.001). Including information on the refined sub-parameters improved the correlations, suggesting the uncertainty in the model parameters was partly responsible for the bias. CONCLUSION: Further scientific data from the pharmaceutical industry on model input parameters, particularly on the efficacy of local control measures, may help improve the accuracy of the model predictions. The refined exposure model appears to be a useful exposure assessment screening tool for the pharmaceutical industry.

Trends in wood dust inhalation exposure in the UK, 1985-2005.

OBJECTIVES: Wood dust data held in the Health and Safety Executive (HSE) National Exposure DataBase (NEDB) were reviewed to investigate the long-term changes in inhalation exposure from 1985 to 2005. In addition, follow-up sampling measurements were obtained from selected companies where exposure measurements had been collected prior to 1994, thereby providing a follow-up period of at least 10 years, to determine whether changes in exposure levels had occurred, with key staff being interviewed to identify factors that might be responsible for any changes observed. METHODS: Analysis of the temporal trend in exposure concentrations was performed using Linear Mixed Effect Models on the log-transformed NEDB data set and expressed as the relative annual change in concentration. RESULTS: For the NEDB wood dust data, an annual decline of geometric mean (GM) exposure of 8.1% per year was found based on 1459 exposure measurements collected between 1985 and 2003. This trend was predominantly observed in data from inspection visits (measurements collected on a mandatory basis by a Specialist HSE Inspector) (n = 1009), while data from representative surveys (measurements collected on a voluntary basis to provide information on current practices and exposures) remained relatively stable. Ten follow-up surveys in individual workplaces in 2004-2005 resulted in 70 new measurements and for each of the companies resurveyed, the GM of the wood dust exposure decreased between sampling surveys. CONCLUSION: Analysis of the temporal trend in UK wood dust exposure concentrations revealed declines of 8% per annum. Interviews with key long-serving employees and management suggest that factors such as technological changes in production processes, response to new legislation, and enforcement agency inspections, together with global economic trends, could be linked to the downward trends observed.