RESUMO
PURPOSE: Step count is an intuitive measure of physical activity frequently quantified in health-related studies; however, accurate step counting is difficult in the free-living environment, with error routinely above 20% in wrist-worn devices against camera-annotated ground truth. This study aims to describe the development and validation of step count derived from a wrist-worn accelerometer and assess its association with cardiovascular and all-cause mortality in a large prospective cohort. METHODS: We developed and externally validated a self-supervised machine learning step detection model, trained on an open-source and step-annotated free-living dataset. 39 individuals will free-living ground-truth annotated step counts were used for model development. An open-source dataset with 30 individuals was used for external validation. Epidemiological analysis was performed using 75,263 UK Biobank participants without prevalent cardiovascular disease (CVD) or cancer. Cox regression was used to test the association of daily step count with fatal CVD and all-cause mortality after adjustment for potential confounders. RESULTS: The algorithm substantially outperformed reference models (free-living mean absolute percent error of 12.5%, versus 65-231%). Our data indicate an inverse dose-response association, where taking 6,430-8,277 daily steps was associated with 37% [25-48%] and 28% [20-35%] lower risk of fatal CVD and all-cause mortality up to seven years later, compared to those taking fewer steps each day. CONCLUSIONS: We have developed an open and transparent method that markedly improves the measurement of steps in large-scale wrist-worn accelerometer datasets. The application of this method demonstrated expected associations with CVD and all-cause mortality, indicating excellent face validity. This reinforces public health messaging for increasing physical activity and can help lay the groundwork for the inclusion of target step counts in future public health guidelines.
RESUMO
BACKGROUND: The influence of patellar resurfacing on anterior knee pain, stair climbing, and functional activity outcomes following total knee arthroplasty (TKA) are incompletely understood. This study examined the influence of patellar resurfacing on patient-reported outcome measures (PROMs) relating to anterior knee pain and function. METHODS: The Knee Injury and Osteoarthritis Outcome Score of Joint Replacement (KOOS, JR.) patient PROMs were collected preoperatively and at 12 months follow-up for 950 TKAs performed over 5 years. Indications for patellar resurfacing included Grade IV patello-femoral (PFJ) changes or mechanical PFJ findings during patellar trialing. Patellar resurfacing was performed on 393 (41%) of the 950 TKAs performed. Multivariable binomial logistic regressions were performed, using KOOS, JR. questions assessing pain during stair climbing, standing upright, and function during rising from sitting as surrogates for anterior knee pain. Independent regression models were performed for each of the targeted KOOS, JR. questions, with adjustment for age at surgery, sex, and baseline pain and function. RESULTS: No association was observed between 12-month postoperative anterior knee pain or function with patellar resurfacing (P = .17, .97). Patients who had moderate or greater preoperative pain on stairs had an increased likelihood of postoperative pain and functional difficulty (odds ratio 2.3, P = .013), while males were 42% less likely to report postoperative anterior knee pain (odds ratio 0.58, P = .002). CONCLUSION: Selective patellar resurfacing based on PFJ degeneration and mechanical PFJ symptoms produces similar improvement in PROMs for resurfaced and unresurfaced knees.
Assuntos
Artroplastia do Joelho , Prótese do Joelho , Osteoartrite do Joelho , Masculino , Humanos , Incidência , Osteoartrite do Joelho/cirurgia , Resultado do Tratamento , Articulação do Joelho/cirurgia , Patela/cirurgia , Dor Pós-Operatória/epidemiologia , Dor Pós-Operatória/etiologia , Dor Pós-Operatória/cirurgiaRESUMO
BACKGROUND: Influences on anterior knee pain, stair climbing limitations, and function such as rising from sitting are poorly understood in unicompartmental knee arthroplasty (UKA). Original indications for UKA excluded patients who had patello-femoral disease, while more recent studies have expanded the indications to include these patients. This study examined the influence of the patello-femoral joint degeneration on patient-reported outcome measures relating to anterior knee pain and function after UKA. METHODS: Between October 2017 and August 2021, Knee Injury and Osteoarthritis Outcome Score of Joint Replacement (KOOS, JR) patient-reported outcome measures were collected preoperatively and at 12 months of follow-up for 678 medial UKAs. Patello-femoral joint status was visually graded intraoperatively. Radiographic or intraoperative medial patellar facet and trochlear patello-femoral arthritis and preoperative anterior knee pain were not considered contraindications for UKA, while grade IV lateral patello-femoral arthritis was considered a contraindication for UKA. Multivariable ordinal logistic regressions were performed, using the KOOS, JR questionnaire assessing pain during stair climbing, standing upright, and function during rising from sitting. Independent regressions were performed for each targeted KOOS, JR question, with adjustments for age at surgery, sex, and baseline pain and function scores. RESULTS: No association was observed between 12-month postoperative anterior knee pain (P = .575) and function (P = .854) with patellar osteoarthritis grading after UKA. When comparing fixed and mobile-bearing UKA designs, no association was observed between bearing type and pain (P = .663) or functional outcomes (P = .758). CONCLUSION: Pain and function improved significantly following medial UKA and was independent of medial patellar and trochlear degenerative status.
Assuntos
Artroplastia do Joelho , Doenças Ósseas , Prótese do Joelho , Osteoartrite do Joelho , Articulação Patelofemoral , Humanos , Estudos Prospectivos , Resultado do Tratamento , Osteoartrite do Joelho/cirurgia , Articulação do Joelho/cirurgia , Articulação Patelofemoral/cirurgia , Dor/cirurgia , Doenças Ósseas/cirurgia , Estudos RetrospectivosRESUMO
PURPOSE: Hip and knee arthroplasty aims to reduce joint pain and increase functional mobility in patients with osteoarthritis; however, the degree to which arthroplasty is associated with higher physical activity is unclear. The current study sought to assess the association of hip and knee arthroplasty with objectively measured physical activity. METHODS: This cross-sectional study analyzed wrist-worn accelerometer data collected in 2013-2016 from UK Biobank participants (aged 43-78 yr). Multivariable linear regression was performed to assess step count, cadence, overall acceleration, and activity behaviors between nonarthritic controls, end-stage arthritic, and postoperative cohorts, controlling for demographic and behavioral confounders. From a cohort of 94,707 participants with valid accelerometer wear time and complete self-reported data, electronic health records were used to identify 3506 participants having undergone primary or revision hip or knee arthroplasty and 68,389 nonarthritic controls. RESULTS: End-stage hip or knee arthritis was associated with taking 1129 fewer steps per day (95% confidence interval (CI), 811-1447; P < 0.001) and having 5.8 fewer minutes per day (95% CI, 3.0-8.7; P < 0.001) of moderate-to-vigorous activity compared with nonarthritic controls. Unilateral primary hip and knee arthroplasties were associated with 877 (95% CI, 284-1471; P = 0.004) and 893 (95% CI, 232-1554; P = 0.008) more steps than end-stage osteoarthritic participants, respectively. Postoperative unilateral hip arthroplasty participants demonstrated levels of moderate-to-vigorous physical activity and daily step count equivalent to nonarthritic controls. No difference in physical activity was observed between any cohorts in terms of overall acceleration, or time spent in daily light activity, sedentary behavior, or sleep. CONCLUSIONS: Hip and knee arthroplasties are associated with higher levels of physical activity compared with participants with end-stage arthritis. Unilateral hip arthroplasty patients, in particular, demonstrate equivalence to nonarthritic peers at more than 1 yr after surgery.
Assuntos
Artroplastia de Quadril , Artroplastia do Joelho , Osteoartrite do Joelho , Humanos , Estudos Transversais , Exercício Físico , Osteoartrite do Joelho/cirurgiaRESUMO
BACKGROUND: Cancer is an age-related condition, but changes to modifiable lifestyle-related behaviours, including physical activity, could impact risk. While step count is an accessible metric of activity for older adults, its association with cancer risk remains poorly understood. We investigated the association between accelerometer-measured total activity, step count, and cancer risk. METHODS: We analysed data from a prospective UK Biobank cohort of consenting participants who wore wrist-based Axivity AX3 accelerometer devices for 7 days between June 1, 2013 and Dec 23, 2015, had valid accelerometer data, and no previous cancer diagnosis at baseline. Machine learning models estimated total physical activity (vector magnitude) and step count. The primary outcome, a composite of 13 cancers previously associated with physical activity, was obtained from national registries. Hazard ratios (HR) and were calculated using Cox proportional hazard models, with attained age as the underlying timescale and adjustment for sex, ethnicity, smoking status, alcohol consumption, education, and Townsend Deprivation Index. The impact of reallocating time between behaviours was evaluated using compositional data analyses. Dose-response associations were assessed with restricted cubic splines. FINDINGS: We analysed data from 86â556 participants, who were followed up during an average of 6·1 years (age range 43-78; 48â478 [56%] female and 38â078 [44%] male; 83â830 [97%] white). 5577 incident malignant cancers occurred among these 86â556 participants. Greater total physical activity was associated with a lower risk of physical-activity-related cancer (HR per 1 SD [+8·33 milligravity per day] 0·85, 95% CI 0·81-0·89). Reallocating 30 min/day from other activities to moderate-to-vigorous physical activity behaviour was associated with lower cancer risk (HR 0·96, 0·94-0·98), as was reallocating 1 h/day to light intensity activity (HR 0·94, 0·92-0·96), compared with the mean behaviour composition among included participants. Compared with taking 5000 steps per day, taking 10â000 daily steps was associated with a significantly lower risk of physical-activity-related cancer (HR 0·81, 0·73-0·90). INTERPRETATION: In this sample from the UK Biobank, higher total physical activity and daily step count were associated with lower risk of physical-activity-related cancers. Findings suggest additional physical activity time, irrespective of intensity, may be beneficial. Increasing low intensity activity time and increasing daily step counts could be practical public health interventions to lower cancer risk, especially for aging adults. FUNDING: National Institute of Health Oxford Cambridge Scholars Program, Wellcome Trust, Swiss Re, Health Data Research UK, and Cancer Research UK.
Assuntos
Bancos de Espécimes Biológicos , Neoplasias , Humanos , Masculino , Feminino , Idoso , Adulto , Pessoa de Meia-Idade , Estudos Prospectivos , Exercício Físico , Acelerometria , Reino Unido/epidemiologia , Neoplasias/epidemiologiaRESUMO
Background: Step count is an intuitive measure of physical activity frequently quantified in a range of health-related studies; however, accurate quantification of step count can be difficult in the free-living environment, with step counting error routinely above 20% in both consumer and research-grade wrist-worn devices. This study aims to describe the development and validation of step count derived from a wrist-worn accelerometer and to assess its association with cardiovascular and all-cause mortality in a large prospective cohort study. Methods: We developed and externally validated a hybrid step detection model that involves self-supervised machine learning, trained on a new ground truth annotated, free-living step count dataset (OxWalk, n=39, aged 19-81) and tested against other open-source step counting algorithms. This model was applied to ascertain daily step counts from raw wrist-worn accelerometer data of 75,493 UK Biobank participants without a prior history of cardiovascular disease (CVD) or cancer. Cox regression was used to obtain hazard ratios and 95% confidence intervals for the association of daily step count with fatal CVD and all-cause mortality after adjustment for potential confounders. Findings: The novel step algorithm demonstrated a mean absolute percent error of 12.5% in free-living validation, detecting 98.7% of true steps and substantially outperforming other recent wrist-worn, open-source algorithms. Our data are indicative of an inverse dose-response association, where, for example, taking 6,596 to 8,474 steps per day was associated with a 39% [24-52%] and 27% [16-36%] lower risk of fatal CVD and all-cause mortality, respectively, compared to those taking fewer steps each day. Interpretation: An accurate measure of step count was ascertained using a machine learning pipeline that demonstrates state-of-the-art accuracy in internal and external validation. The expected associations with CVD and all-cause mortality indicate excellent face validity. This algorithm can be used widely for other studies that have utilised wrist-worn accelerometers and an open-source pipeline is provided to facilitate implementation.
RESUMO
Importance: The influence of total daily and light intensity activity on cancer risk remains unclear, as most existing knowledge is drawn from studies relying on self-reported leisure-time activities of moderate-vigorous intensity. Objective: To investigate associations between total daily activity, including step counts, and activity intensity on incident cancer risk. Design Setting and Participants: Prospective analysis of cancer-free UK Biobank participants who wore accelerometers for 7-days (between 2013-2015), followed for cancer incidence through national registries (mean follow-up 5.8 years (SD=1.3)). Exposures: Time-series machine learning models derived daily total activity (average acceleration), behaviour time, step counts, and peak 30-minute cadence from wrist-based accelerometer data. Main Outcomes and Measures: A composite cancer outcome of 13 cancers previously associated with low physical activity (bladder, breast, colon, endometrial, oesophageal adenocarcinoma, gastric cardia, head and neck, kidney, liver, lung, myeloid leukaemia, myeloma, and rectum) based on previous studies of self-reported activity. Cox proportional hazards regression models estimated hazard ratios (HR) and 95% confidence intervals (CI), adjusted for age, sex, ethnicity, smoking, alcohol, education, Townsend Deprivation Index, and reproductive factors. Associations of reducing sedentary time in favour of increased light and moderate-vigorous activity were examined using compositional data analyses. Results: Among 86 556 participants (mean age 62.0 years (SD=7.9) at accelerometer assessment), 2 669 cancers occurred. Higher total physical activity was associated with a lower overall cancer risk (HR1SD=0.85, [95%CI 0.81-0.89]). On average, reallocating one hour/day from sedentary behaviour to moderate-vigorous physical activity was associated with a lower risk (HR=0.92, [0.89-0.95]), as was reallocating one hour/day to light-intensity physical activity (HR=0.94, [0.92-0.96]). Compared to individuals taking 5 000 daily steps, those who took 9 000 steps had an 18% lower risk of physical-activity-related cancer (HR=0.82, [0.74-0.90]). We found no significant association with peak 30-minute cadence after adjusting for total steps. Conclusion and Relevance: Higher total daily physical activity and less sedentary time, in favour of both light and moderate-vigorous intensity activity, were associated with a lower risk of certain cancers. For less active adults, increasing step counts by 4 000 daily steps may be a practical public health intervention for lowering the risk of some cancers.
RESUMO
Highly porous ingrowth surfaces have been introduced into tibial tray fixation to improve long-term survivorship in cementless total knee arthroplasty. This study was designed to evaluate the effect of porous ingrowth surface on primary stability in the implanted cementless tibial component. Three tibial tray designs possessing sintered bead or roughened porous coating ingrowth surfaces were implanted into a foam tibia model with primary stability assessed via digital image correlation during stair descent and condylar liftoff loading. Follow-up testing was conducted by implanting matched-pair cadaveric tibias with otherwise identical trays with two iterations of ingrowth surface design. Trays were loaded and micromotion evaluated in a condylar liftoff model. The sintered bead tibial tray exhibited slightly lower micromotion than the roughened porous coating in stair descent loading. However, no significant difference in primary stability was observed in condylar liftoff loading in either foam or cadaveric specimens. Cementless tibial trays featuring two different iterations of porous ingrowth surfaces demonstrated both good stability in cadaveric specimens with less than 80 microns of micromotion and 1 mm of subsidence under cyclic loading. While improved ingrowth surfaces may lead to improved biological fixation and long-term osteointegration, this study was unable to identify a difference in primary stability associated with subsequent ingrown surface design iteration.
Assuntos
Artroplastia do Joelho , Instabilidade Articular/cirurgia , Prótese do Joelho , Osseointegração , Tíbia/cirurgia , Artroplastia do Joelho/instrumentação , Artroplastia do Joelho/métodos , Fenômenos Biomecânicos , Cimentos Ósseos , Cimentação , Humanos , Instabilidade Articular/fisiopatologia , Modelos Anatômicos , Osseointegração/fisiologia , Porosidade , Desenho de Prótese , Tíbia/fisiopatologiaRESUMO
OBJECTIVES: Wearable motion sensors are used with increasing frequency in the evaluation of gait, function and physical activity within orthopaedics and sports medicine. The integration of wearable technology into the clinical pathway offers the ability to improve post-operative patient assessment beyond the scope of current, questionnaire-based patient-reported outcome measures. This scoping review assesses the current methodology and clinical application of accelerometers and inertial measurement units for the evaluation of patient activity and functional recovery following knee arthroplasty. DESIGN: This is a systematically conducted scoping review following Joanna Briggs Institute methodology for scoping reviews and reported consulting the Preferred Reporting Items for Systematic Review and Meta-Analyses extension for scoping reviews. A protocol for this review is registered with the Open Science Framework (https://osf.io/rzg9q). DATA SOURCES: CINAHL, EMBASE, MEDLINE and Web of Science databases were searched for manuscripts published between 2008 and 2019. ELIGIBILITY CRITERIA: We included clinical studies reporting the use of any combination of accelerometers, pedometers or inertial measurement units for patient assessment at any time point following knee arthroplasty. DATA EXTRACTION AND SYNTHESIS: Data extracted from manuscripts included patient demographics, sensor technology, testing protocol and sensor-based outcome variables. RESULTS: 45 studies were identified, including 2076 knee arthroplasty patients, 620 patients with end-stage osteoarthritis and 449 healthy controls. Primary aims of the identified studies included functional assessment, physical activity monitoring and evaluation of knee instability. Methodology varied widely between studies, with inconsistency in reported sensor configuration, testing protocol and output variables. CONCLUSIONS: The use of wearable sensors in evaluation of knee arthroplasty procedures is becoming increasingly common and offers the potential to improve clinical understanding of recovery and rehabilitation. While current studies lack consistency, significant opportunity exists for the development of standardised measures and protocols for function and physical activity evaluation.
Assuntos
Artroplastia do Joelho , Dispositivos Eletrônicos Vestíveis , Acelerometria , Exercício Físico , Marcha/fisiologia , Humanos , Resultado do TratamentoRESUMO
BACKGROUND: Tibial component failure has been a problem in total knee arthroplasty, it is still undetermined how tibial resection depth affects the strength to support a tibial component. This study examined the relationship between the resection depth and the bone density and the mechanical strength to support the tibial component. MATERIALS AND METHODS: Eight matched pairs of fresh, frozen cadaver lower legs were imaged with computed tomography to assess the bone density. A right tibia was resected at minimum resection level and a left tibia was resected at deep resection level. After the tibial component was implanted with cement on each tibia, it was loaded on a materials testing load frame to measure the stiffness and the load to failure. RESULTS: The average bone density at the minimum resection level of the tibia was significantly higher than at deep level (p=0.0003). The average stiffness and load to failure of the proximal tibia were 1105 N/mm (range 889 to 1303 N/mm) and 5626 N (range 3360 to 9098 N). There was no statistical correlation between tibial resection depth and the axial stiffness (p=0.4107) or the load to failure (p=0.1487). CONCLUSIONS: Although the bone density at a minimum resection level was higher than that at a deep level, the strength to support the tibial component was not statistically higher at a minimum cutting level than at a deeper cutting level proportionally. Surgeons may not need to minimize a proximal tibial bone resection to maintain a stronger support for a tibial component.
Assuntos
Artroplastia do Joelho , Densidade Óssea/fisiologia , Tíbia/fisiologia , Tíbia/cirurgia , Idoso , Fenômenos Biomecânicos , Feminino , Humanos , Estimativa de Kaplan-Meier , Masculino , Modelos BiológicosRESUMO
Press-fit acetabular components are susceptible to rim deformation. The inherent variability within acetabular reaming techniques may generate increased press-fit and, subsequently, additional component deformation. The purpose of this study was to analyze the insertion and deformation characteristics of acetabular components designed for dual-mobility systems based on component design, size, and reaming technique. Shell deformation was quantified in a validated worst-case scenario foam pinch model. Thin-walled, one-piece, and modular dual-mobility shells of varying size were implanted in under- and over-reamed cavities with insertion force measured and shell deformation assessed using digital image correlation. Increased shell size resulted in larger rim deformation in one-piece components, with a reduction in press-fit by 1 mm resulting in up to 48% reduction in insertion forces and between 23% and 51% reduction in shell deformation. Lower insertion forces and deformations were observed in modular components. Variability in acetabular reaming plays a significant role in the ease of implantation and component deformation in total hip arthroplasty. Modular components are less susceptible to deformation than thin-walled monoblock shells. Care should be taken to avoid excessive under-reaming, particularly in the scenario of large shell size and high-density patient bone stock.
Assuntos
Acetábulo/cirurgia , Artroplastia de Quadril/instrumentação , Fenômenos Mecânicos , Desenho de PróteseRESUMO
BACKGROUND: Short-stemmed femoral components facilitate reduced exposure surgical techniques while preserving native bone. A clinically successful stem should ideally reduce risk for stress shielding while maintaining adequate primary stability for biological fixation. We asked (1) how stem-length changes cortical strain distribution in the proximal femur in a fit-and-fill geometry and (2) if short-stemmed components exhibit primary stability on par with clinically successful designs. METHODS: Cortical strain was assessed via digital image correlation in composite femurs implanted with long, medium, and short metaphyseal fit-and-fill stem designs in a single-leg stance loading model. Strain was compared to a loaded, unimplanted femur. Bone-implant micromotion was then compared with reduced lateral shoulder short stem and short tapered-wedge designs in cyclic axial and torsional testing. RESULTS: Femurs implanted with short-stemmed components exhibited cortical strain response most closely matching that of the intact femur model, theoretically reducing the potential for proximal stress shielding. In micromotion testing, no difference in primary stability was observed as a function of reduced stem length within the same component design. CONCLUSION: Our findings demonstrate that within this fit-and-fill stem design, reduction in stem length improved proximal cortical strain distribution and maintained axial and torsional stability on par with other stem designs in a composite femur model. Short-stemmed implants may accommodate less invasive surgical techniques while facilitating more physiological femoral loading without sacrificing primary implant stability.
Assuntos
Fêmur/cirurgia , Prótese de Quadril , Desenho de Prótese , Fêmur/fisiologia , Humanos , Estresse MecânicoRESUMO
Prosthetic alignment, patient characteristics, and implant design are all factors in long-term survival of total knee arthroplasty (TKA), yet the level at which each of these factors contribute to implant loosening has not been fully described. Prior clinical and biomechanical studies have indicated tibial overload as a cause of early TKA revision. The purpose of this study was to determine the relationship between tibial component design and bone resection on tibial loading. Finite-element analysis (FEA) was performed after simulated implantation of metal backed (MB) and all-polyethylene (AP) TKA components in 5 and 15 mm of tibial resection into a validated intact tibia model. Proximal tibial strains significantly increased between 13% and 199% when implanted with AP components (p < 0.05). Strain significantly increased between 12% and 209% in the posterior tibial compartment with increased bone resection (p < 0.05). This study indicates elevated strains in AP implanted tibias across the entirety of the proximal tibial cortex, as well as a posterior shift in tibial loading in instances of increased resection depth. These results are consistent with trends observed in prior biomechanical studies and may associate the documented device history of tibial collapse in AP components with increased bone strain and overload beneath the prosthesis.
Assuntos
Artroplastia do Joelho , Análise de Elementos Finitos , Teste de Materiais , Fenômenos Mecânicos , Metais , Tíbia/cirurgia , Próteses e Implantes , Estresse MecânicoRESUMO
The mechanical properties and thermal history of polymethyl-methacrylate bone cement vary significantly with the preparation procedure used. Because the polymerization reaction is exothermic, many researchers have attempted to minimize thermal osteonecrosis due to heat generation by altering procedures in the preparation of the cement. In most previous studies, only one or two aspects of the preparation procedure were controlled, and there has been little research that comprehensively examines the effects of preparation on the cure kinetics and resulting properties of bone cement. In this study, cement viscosity, cement layer thickness, initial cement temperature, initial metal component temperature, and mixing method were varied to assess the effects on the cement. Maximum temperature, polymerization time, necrosis index, bending strength, and porosity were chosen to evaluate the different preparation procedures, where an optimal procedure would minimize necrosis, reduce cement cure time, and maximize bending strength. Design of Experiments (DOE) was used to examine the main effects and interactions of preparation techniques. Among the most prominent results, it was found that the cure kinetics and the related quantities are primarily controlled by the initial metal component temperature and that the bending strength is most dependent on the mixing method. For the two formulations studied, the optimum preparation procedures should keep cement and metal components at room temperature prior to mixing with a vacuum mixing system. Reducing cement mantle thickness may also be advantageous, as it reduces the maximum temperature and the risk of tissue damage. © 2015 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 34:915-923, 2016.
Assuntos
Cimentos Ósseos/química , Polimetil Metacrilato/química , CinéticaRESUMO
Design parameters affecting initial mechanical stability of tapered, splined modular titanium stems (TSMTSs) are not well understood. Furthermore, there is considerable variability in contemporary designs. We asked if spline geometry and stem taper angle could be optimized in TSMTS to improve mechanical stability to resist axial subsidence and increase torsional stability. Initial stability was quantified with stems of varied taper angle and spline geometry implanted in a foam model replicating 2cm diaphyseal engagement. Increased taper angle and a broad spline geometry exhibited significantly greater axial stability (+21%-269%) than other design combinations. Neither taper angle nor spline geometry significantly altered initial torsional stability.
Assuntos
Artroplastia de Quadril/instrumentação , Prótese de Quadril , Desenho de Prótese , Titânio/química , Diáfises , Fêmur/cirurgia , Humanos , Teste de Materiais , ReoperaçãoRESUMO
Limited experimental data exist comparing the mechanical response of the tibial cortex between fixed and rotating platform (RP) total knee arthroplasty (TKA), particularly in the revision setting. We asked if RP-TKA significantly affects tibiofemoral torque and cortical stain response in both the primary and revision settings. Fixed and RP tibial trays were implanted into analogue tibias and biomechanically tested under axial and torsional loading. Torque and strain response were analyzed using digital image correlation. Fixed bearing designs exhibited 13.8 times greater torque (P<0.01), and 69% (P<0.01) higher cortical strain than RP designs. Strain response was similar in the primary and revision cohorts. The decrease in torque transfer could act as a safeguard to reduce stress, micromotion and torsional fatigue in scenario of poor bone stock.
Assuntos
Artroplastia do Joelho , Articulação do Joelho/fisiopatologia , Prótese do Joelho , Tíbia/fisiopatologia , Fenômenos Biomecânicos , Humanos , Articulação do Joelho/cirurgia , Modelos Teóricos , Desenho de Prótese , Reoperação , Estresse Mecânico , Tíbia/cirurgia , TorqueRESUMO
With increased precision in alignment offered by new generations of instrumentation and customized guides, this study was designed to establish a biomechanically-based target alignment for the balance of tibial loading in order to diminish the likelihood of pain and subsidence related to mechanical overload post-UKA. Sixty composite tibias were implanted with Oxford UKA tibial components with varied sagittal slope, resection depth, rotation and medial shift using patient matched instrumentation. Digital image correlation and strain gage analysis was conducted in static loading to evaluate strain distribution as a result of component alignment. In this model, minimal distal resection and most lateral positioning, neutral component rotation, and 3° of slope (from mechanical axis) exhibited the most balanced strain response to loading following UKA.
Assuntos
Articulação do Joelho/cirurgia , Osteoartrite do Joelho/cirurgia , Tíbia/cirurgia , Artroplastia do Joelho , Fenômenos Biomecânicos , Humanos , Tíbia/anatomia & histologia , Tíbia/fisiopatologiaRESUMO
Acetabular cup orientation has been shown to influence dislocation, impingement, edge loading, contact stress, and polyethylene wear in total hip arthroplasty. Acetabular implant stiffness has been suggested as a factor in pelvic stress shielding and osseous integration. This study was designed to examine the combined effects of acetabular cup orientation and stiffness and on pelvic osseous loading. Four implant designs of varying stiffness were implanted into a composite hemipelvis in 35° or 50° of abduction. Specimens were dynamically loaded to simulate gait and pelvic strains were quantified with a grid of rosette strain gages and digital image correlation techniques. Changes in the joint reaction force orientation significantly altered mean acetabular bone strain values up to 67%. Increased cup abduction resulted in a 12% increase along the medial acetabular wall and an 18% decrease in strain in inferior lateral regions. Imbalanced loading distributions were observed with the stiffer components, resulting in higher, more variable, and localized surface strains. This study illustrates the effects of cup stiffness, gait, and implant orientation on loading distributions across the implanted pelvis.
Assuntos
Acetábulo/cirurgia , Artroplastia de Quadril , Articulação do Quadril/cirurgia , Prótese de Quadril , HumanosRESUMO
BACKGROUND: Press-fit acetabular components are susceptible to deformation in an underreamed socket, with excessive deformation of metal-on-metal (MOM) components potentially leading to increased torsional friction and micromotion. Specifically, however, it remains unclear how cup diameter, design, and time from implantation affect shell deformation. QUESTIONS/PURPOSES: We asked whether (1) changes in component geometry and material altered maximum shell deformation and (2) time-dependent deformational relaxation processes occurred. METHODS: Diametral deformation was quantified after press-fit implantation of metal shells into a previously validated polyurethane model. Experimental groups (n = 6-8) consisted of 48-, 54-, 60-, and 66-mm MOM cups of 6-mm wall thickness, 58-mm cups of 10-mm wall thickness, and CoCrMo and Ti6Al4V 58-mm modular cups. RESULTS: Greater cup diameter, thinner wall construction, and Ti6Al4V modular designs generated conditions for maximum shell deformation ranging from 0.047 to 0.267 mm. Relaxation (18%-32%) was observed 120 hours postimplantation in thin-walled and modular designs. CONCLUSIONS: Our findings demonstrate a reduction of shell deformation over time and suggest, under physiologic loading, early component deformation varies with design. CLINICAL RELEVANCE: Component deformation should be a design consideration regardless of bearing surface. Designs neglecting to adequately address deformational changes in vivo could be susceptible to diminished cup survival, increased wear, and premature revision.
Assuntos
Acetábulo/cirurgia , Artroplastia de Quadril , Articulação do Quadril/cirurgia , Prótese de Quadril , Desenho de Prótese , Humanos , Teste de MateriaisRESUMO
Initial stability with limited micromotion in uncemented total hip arthroplasty acetabular components is essential for bony attachment and long-term biomechanical fixation. This study compared porous titanium fixation surfaces to clinically established, plasma-sprayed designs in terms of interface stability and required seating force. Porous plasma-sprayed modular and metal-on-metal (MOM) cups were compared to a modular, porous titanium designs. Cups were implanted into polyurethane blocks with1-mm interference fit and subsequently edge loaded to failure. Porous titanium cups exhibited 23% to 65% improvement in initial stability when compared to plasma-sprayed cup designs (P=.01): a clinically significant increase, based on experience and prior literature. The results of this study indicate increased interface stability in porous titanium-coated cups without significantly increasing the necessary force and energy required for full seating.