Phosphonic Acids for Interfacial Engineering of Transparent Conductive Oxides.

Transparent conducting oxides (TCOs), such as indium tin oxide and zinc oxide, play an important role as electrode materials in organic-semiconductor devices. The properties of the inorganic-organic interface-the offset between the TCO Fermi level and the relevant transport level, the extent to which the organic semiconductor can wet the oxide surface, and the influence of the surface on semiconductor morphology-significantly affect device performance. This review surveys the literature on TCO modification with phosphonic acids (PAs), which has increasingly been used to engineer these interfacial properties. The first part outlines the relevance of TCO surface modification to organic electronics, surveys methods for the synthesis of PAs, discusses the modes by which they can bind to TCO surfaces, and compares PAs to alternative organic surface modifiers. The next section discusses methods of PA monolayer deposition, the kinetics of monolayer formation, and structural evidence regarding molecular orientation on TCOs. The next sections discuss TCO work-function modification using PAs, tuning of TCO surface energy using PAs, and initiation of polymerizations from TCO-tethered PAs. Finally, studies that examine the use of PA-modified TCOs in organic light-emitting diodes and organic photovoltaics are compared.

Enhanced permittivity and energy density in neat poly(vinylidene fluoride-trifluoroethylene-chlorotrifluoroethylene) terpolymer films through control of morphology.

Polymer materials with large dielectric constants are desirable for the development of high energy density capacitors. We show that the dielectric properties of poly(vinylidene fluoride-trifluoroethylene-chlorotrifluoroethylene) [P(VDF-TrFE-CTFE)] can be improved by the use of processing conditions that favor formation of a highly crystalline morphology of the nonpolar α-phase. Through the use of spin coating, thermal treatment above the melting temperature, and quenching, we were able to attain a highly crystalline, α-phase rich morphology that has a quite large dielectric constant of 77 ± 10 at 1 kHz. The final morphology and phase composition of the terpolymer films depend strongly on the postprocessing thermal treatment and the quality of the solvent. Evaluation of the polarization behavior of the terpolymer films as a function of electric field reveal that the polymer exhibits a relaxor-ferroelectric behavior and has a substantial energy density of 9.7 J/cm(3) at fields of up to approximately 470 V/µm. Under millisecond pulsed charge-discharge measurements a 3-fold increase in energy density (27 J/cm(3)) is obtained at high fields (∼600 V/µm). Our study demonstrates that the processing conditions and morphology of fluorinated terpolymer films are controlling factors for achievement of high dielectric permittivity and energy density that are critical for high performance capacitors.

High-energy-density sol-gel thin film based on neat 2-cyanoethyltrimethoxysilane.

Hybrid organic-inorganic sol-gel dielectric thin films from a neat 2-cyanoethyltrimethoxysilane (CNETMS) precursor have been fabricated and their permittivity, dielectric strength, and energy density characterized. CNETMS sol-gel films possess compact, polar cyanoethyl groups and exhibit a relative permittivity of 20 at 1 kHz and breakdown strengths ranging from 650 V/µm to 250 V/µm for film thicknesses of 1.3 to 3.5 µm. Capacitors based on CNETMS films exhibit extractable energy densities of 7 J/cm(3) at 300 V/µm, as determined by charge-discharge and polarization-electric field measurements, as well as an energy extraction efficiency of ~91%. The large extractable energy resulting from the linear dielectric polarization behavior suggests that CNETMS films are promising sol-gel materials for pulsed power applications.