RESUMO
OBJECTIVES: To synthesize casein enzymatic hydrolysate (CEH)-laden gelatin methacryloyl (GelMA) fibrous scaffolds and evaluate the cytocompatibility and anti-inflammatory effects on dental pulp stem cells (DPSCs). MATERIALS AND METHODS: GelMA fibrous scaffolds with 10%, 20%, and 30% CEH (w/w) and without CEH (control) were obtained via electrospinning. Chemo-morphological, degradation, and mechanical analyses were conducted to evaluate the morphology and composition of the fibers, mass loss, and mechanical properties, respectively. Adhesion/spreading and viability of DPSCs seeded on the scaffolds were also assessed. The anti-inflammatory potential on DPSCs was tested after the chronic challenge of cells with lipopolysaccharides (LPS), followed by treatment with extracts obtained after immersing the scaffolds in α-MEM. The synthesis of the pro-inflammatory cytokines IL-6, IL-1α, and TNF-α was measured by ELISA. Data were analyzed by ANOVA/post-hoc tests (α = 5%). RESULTS: CEH-laden electrospun fibers had a larger diameter than pure GelMA (p ≤ 0.036). GelMA scaffolds laden with 20% and 30% CEH had a greater mass loss. Tensile strength was reduced for the 10% CEH fibers (p = 0.0052), whereas no difference was observed for the 20% and 30% fibers (p ≥ 0.6736) compared to the control. Young's modulus decreased with CEH (p < 0.0001). Elongation at break increased for the 20% and 30% CEH scaffolds (p ≤ 0.0038). Over time, DPSCs viability increased across all groups, indicating cytocompatibility, with CEH-laden scaffolds exhibiting greater cell viability after seven days (p ≤ 0.0166). Also, 10% CEH-GelMA scaffolds decreased the IL-6, IL-1α, and TNF-α synthesis (p ≤ 0.035). CONCLUSION: CEH-laden GelMA scaffolds facilitated both adhesion and proliferation of DPSCs, and 10% CEH provided anti-inflammatory potential after chronic LPS challenge. CLINICAL RELEVANCE: CEH incorporated in GelMA fibrous scaffolds demonstrated the potential to be used as a cytocompatible and anti-inflammatory biomaterial for vital pulp therapy.
Assuntos
Anti-Inflamatórios , Caseínas , Sobrevivência Celular , Polpa Dentária , Gelatina , Alicerces Teciduais , Gelatina/química , Polpa Dentária/citologia , Polpa Dentária/efeitos dos fármacos , Alicerces Teciduais/química , Humanos , Anti-Inflamatórios/farmacologia , Sobrevivência Celular/efeitos dos fármacos , Metacrilatos/química , Teste de Materiais , Ensaio de Imunoadsorção Enzimática , Resistência à Tração , Células Cultivadas , Células-Tronco/efeitos dos fármacos , Adesão Celular/efeitos dos fármacos , Materiais Biocompatíveis/farmacologia , Materiais Biocompatíveis/química , Citocinas/metabolismo , Propriedades de SuperfícieRESUMO
This in vitro experimental investigation aimed to evaluate the impact of the combined application of a nanofiber scaffold (NS), a polymeric catalyst primer (PCP) containing 10 mg/mL of heme peroxidase enzyme, and violet LED (LEDv) on the esthetic efficacy (EE), trans-amelodentinal cytotoxicity (TC), and procedural duration of conventional in-office bleaching therapy. To achieve this, 96 standardized enamel/dentin discs were individually placed in artificial pulp chambers. A 35% hydrogen peroxide (H2O2) bleaching gel was administered for 45, 30, or 15 min to the enamel, either previously coated with NS + PCP or left uncoated, followed by irradiation with LEDv for 15 min or no irradiation. The established groups were as follows: G1, negative control (no treatment); G2, 35% H2O2/45 min; G3, NS + PCP + LEDv; G4, NS + PCP + 35%H2O2/45 min + LEDv; G5, NS + PCP + 35%H2O2/30 min + LEDv; and G6, NS + PCP + 35%H2O2/15 min + LEDv. Extracts (culture medium + gel components diffused through the discs) were collected and applied to odontoblast-like MDPC-23 cells. EE (ΔE00 and ΔWI) and TC were assessed using ANOVA/Tukey analysis (p < 0.05). The EE analysis revealed no statistical differences between G6 and G2 (p > 0.05). Cells in G6 exhibited higher viability and lower oxidative stress compared to other bleached groups (p < 0.05). In conclusion, employing NS + PCP + LEDv to catalyze a 35%H2O2 bleaching gel applied for 15 min to the enamel resulted in successful esthetic improvements and reduced the cytotoxicity commonly linked with traditional in-office bleaching procedures.
Assuntos
Peróxido de Hidrogênio , Polímeros , Peróxido de Hidrogênio/farmacologia , Biopolímeros , Catálise , Meios de CulturaRESUMO
OBJECTIVES: This study aimed to develop and characterize different formulations of porous chitosan scaffolds (SCH) associated with calcium silicate (CaSi) and evaluate their chemotactic and bioactive potential on human dental pulp cells (hDPCs). METHODS: Different concentrations of CaSi suspensions (0.5%, 1.0%, and 2.0%, w/v) were incorporated (1:5; v/v) /or not, into 2% chitosan solution, giving rise to the following groups: SCH (control); SCH+ 0.5CaSi; SCH+ 1.0CaSi; SCH+ 2.0 CaSi. The resulting solutions were submitted to thermally induced phase separation followed by freeze-drying procedures to obtain porous scaffolds. The topography, pH, and calcium release kinetics of the scaffolds were assessed. Next, the study evaluated the influence of these scaffolds on cell migration (MG), viability (VB), proliferation (PL), adhesion and spreading (A&S), and on total protein synthesis (TP), alkaline phosphatase (ALP) activity, mineralized matrix deposition (MMD), and gene expression (GE) of odontogenic differentiation markers (ALP, DSPP, and DMP-1). The data were analyzed with ANOVA complemented with the Tukey post-hoc test (α = 5%). RESULTS: Incorporation of the CaSi suspension into the chitosan scaffold formulation increased pore diameter when compared with control. Increased amounts of CaSi in the CH scaffold resulted in higher pH values and Ca release. In Groups SCH+ 1.0CaSi and SCH+ 2.0CaSi, increased VB, PF, A&S, GE of DSPP/DMP-1 and MMD values were shown. However, Group SCH+ 2.0CaSi was the only formulation capable of enhancing MG and showed the highest increase in TP, MMD, and GE of DMP-1 and DSPP values. SIGNIFICANCE: SCH+ 2.0CaSi formulation had the highest chemotactic and bioactive potential on hDPCs and may be considered a potential biomaterial for pulp-dentin complex regeneration.
Assuntos
Quitosana , Fosfatase Alcalina/metabolismo , Materiais Biocompatíveis/química , Cálcio , Compostos de Cálcio , Diferenciação Celular , Proliferação de Células , Quitosana/farmacologia , Polpa Dentária , Capeamento da Polpa Dentária , Humanos , Porosidade , Silicatos , Engenharia Tecidual , Alicerces Teciduais/químicaRESUMO
OBJECTIVE: The study aims to assess the effects of a 10% H2O2 bleaching gel with different MnO2 concentrations on the bleaching efficacy (BE), degradation kinetics (DK) of H2O2, and trans-amelodentinal cytotoxicity (TC). MATERIALS AND METHODS: Standardized bovine enamel/dentin disks (n = 96) were placed in artificial pulp chambers, and the bleaching gels were applied for 45 min. Thus, the following groups were established: (G1) no treatment (negative control/NC); (G2) 35% H2O2 (positive control/PC); (G3) 10% H2O2; (G4) 10% H2O2 + 2 mg/mL MnO2; (G5) 10% H2O2 + 6 mg/mL MnO2; and (G6) 10% H2O2 + 10 mg/mL MnO2. After analyzing bleaching efficacy (ΔE00 and ΔWI), the degradation kinetics of H2O2 and trans-amelodentinal cytotoxicity were determined (n = 8, ANOVA/Tukey; p < 0.05). RESULTS: G6 presented BE (ΔE00 and ΔWI) statistically similar to G2, which represented conventional in-office bleaching (p = 0.6795; p > 0.9999). A significant reduction in the diffusion of H2O2 occurred in G3, G4, G5, and G6 compared to G2 (p < 0.0001). The highest DK of H2O2 occurred in G6 (p < 0.0001), which had the lowest TC in comparison with all other bleached groups (p ≤ 0.0186). CONCLUSION: The addition of 10 mg/mL of MnO2 in a 10% H2O2 bleaching gel potentiates the degradation of this reactive molecule, which increases the BE of the product and decreases TC. CLINICAL SIGNIFICANCE: Replacing a 35% H2O2 gel commonly used for conventional in-office dental bleaching by a 10% H2O2 gel containing 10 mg/mL of MnO2 reduces the cytotoxicity of this professional therapy, maintaining its excellent esthetic efficacy.
Assuntos
Clareadores Dentários , Clareamento Dental , Bovinos , Animais , Peróxido de Hidrogênio , Clareadores Dentários/toxicidade , Compostos de Manganês , Óxidos/toxicidade , Estética Dentária , GéisRESUMO
OBJECTIVE: To assess the potential influence of violet LED (V-LED) application time on the esthetic efficacy and cytotoxicity of a 35% H2O2 bleaching gel. METHODOLOGY: Stained and standardized enamel/dentin discs were subjected to one in-office tooth bleaching session (45 min), and the gel was either irradiated or not with V-LED. Thus, the following groups were established (n = 8): G1: No treatment (negative control, NC); G2: 35% H2O2 (positive control, PC); G3: 35%H2O2 + V-LED/15 min; G4: 35%H2O2 + V-LED/30 min; G5: 35%H2O2 + V-LED/45 min. First, esthetic efficacy was assessed (ΔE00 and ΔWI). Discs assembled in artificial pulp chambers were subjected to the same bleaching treatments. Then, the extracts (culture medium + diffused bleaching gel components) were collected and applied to MDPC-23 pulp cells, which were analyzed for viability (Live/Dead, MTT) and oxidative stress (OxS). The amount of H2O2 in the extracts was also determined (leuco crystal-violet/peroxidase). The data were subjected to ANOVA/Tukey at a 5% significance level. RESULTS: Although esthetic efficacy did not differ among the irradiated groups (G3, G4, and G5) (p > 0.05), their results were higher than in G2 (PC; p < 0.05). In the irradiated groups, the cell viability and OxS as well as the amount of H2O2 in the extracts were statistically similar to G2 (PC), regardless of irradiation time (p > 0.05). CONCLUSION: Although V-LED improves the esthetic outcome of in-office tooth bleaching, increasing irradiation time does not effect the color changes and cytotoxicity of this professional therapy.
Assuntos
Fotoquimioterapia , Clareadores Dentários , Clareamento Dental , Peróxido de Hidrogênio , Fotoquimioterapia/métodos , Clareamento Dental/métodos , Clareadores Dentários/farmacologia , Sobrevivência Celular , Ácido HipoclorosoRESUMO
OBJECTIVES: Evaluate the ability of current ion-releasing materials to remineralise bacteria-driven artificial caries lesions. MATERIALS AND METHODS: Standardised class I cavities were obtained in 60 extracted human molars. Specimens underwent a microbiological cariogenic protocol (28 days) to generate artificial caries lesions and then were randomly divided into four restorative groups: adhesive + composite (negative control); glass ionomer cement (GIC); calcium silicate cement (MTA); and resin-modified calcium silicate cement (RMTA). Microhardness analysis (ΔKHN) was performed on 40 specimens (10/group, t = 30 days, 45 days, 60 days in artificial saliva, AS). Micro-CT scans were acquired (3/group, t = 0 days, 30 days, and 90 days in AS). Confocal microscopy was employed for interfacial ultra-morphology analysis (2/group, t = 0 days and 60 days in AS). Additional specimens were prepared and processed for scanning electron microscopy (SEM) and FTIR (n = 3/group + control) to analyse the ability of the tested materials to induce apatite formation on totally demineralised dentine discs (60 days in AS). Statistical analyses were performed with a significance level of 5%. RESULTS: Adhesive + composite specimens showed the lowest ΔKHN values and the presence of gaps at the interface when assessed through micro-CT even after storage in AS. Conversely, all the tested ion-releasing materials presented an increase in ΔKHN after storage (p < 0.05), while MTA best reduced the demineralised artificial carious lesions gap at the interface. MTA and RMTA also showed apatite deposition on totally demineralised dentine surfaces (SEM and FTIR). CONCLUSIONS: All tested ion-releasing materials expressed mineral precipitation in demineralised dentine. Additionally, calcium silicate-based materials induced apatite precipitation and hardness recovery of artificial carious dentine lesions over time. CLINICAL RELEVANCE: Current ion-releasing materials can induce remineralisation of carious dentine. MTA shows enhanced ability of nucleation/precipitation of hydroxyapatite compared to RMTA and GIC, which may be more appropriate to recover severe mineral-depleted dentine.
Assuntos
Cárie Dentária , Dentina , Humanos , Apatitas , Compostos de Cálcio , Cárie Dentária/patologia , Cárie Dentária/terapia , Dentina/química , Cimentos de Ionômeros de Vidro , Hidroxiapatitas , Teste de Materiais , Minerais/análise , Cimentos de Resina , Saliva Artificial , SilicatosRESUMO
OBJECTIVES: To investigate the transdentinal cytotoxicity (TC), degree of conversion (DC), and micro shear bond strength (µSBS) to dentin of light-cured resin cements (LCRCs) photoactivated directly or through a ceramic veneer( ± CV). MATERIALS AND METHODS: The TC was assessed using human dentin discs adapted into artificial pulp chambers. Odontoblast-like cells were seeded on the pulp surface of the discs, then three LCRCs( ± CV) were applied on their etched and hybridized occlusal surface (n = 8/group). The adhesive systems of each LCRCs and sterile phosphate-buffered saline were used as positive and negative controls, respectively. After 24 h, the viability and morphology of cells adhered on discs were assessed. The extracts (culture medium + components of the materials diffused through the discs) were applied on the MDPC-23 to evaluate their viability, adhesion/spreading (A/S), alkaline phosphatase activity (ALP), and mineralized nodule formation (MN). LCRCs( ± CV) specimens were evaluated concerning the DC and µSBS to dentin. Data were analyzed by one-, two-, or three-way ANOVA/Dunnett, Sidak, and Games-Howell tests (α = 5%). RESULTS: All LCRCs( ± CV) reduced cell viability, A/S, ALP, MN, and DC. Except for µSBS, the intensity of reduction was dependent on the LCRC used. LCRCs+CV resulted in lower DC and µSBS but did not increase the TC. SIGNIFICANCE: Besides the presence of CV between the light source and LCRCs reduces the degree of conversion and bond strength to dentin, these materials cause variable level of transdentinal toxicity to pulp cells. Thus, the composition and curing protocols of LCRCs should be revisited and reinforced to prevent mechanical and biological drawbacks.