Selective Chiral Recognition between Amino Acids and Growing Gypsum Crystals.

In nature, selective chiral interactions between biomolecules and minerals provide insight into the mysterious origin of homochirality. Here, we show growing gypsum crystals in a nonequilibrium state can recognize chiral enantiomers of amino acids. The chiral selection for amino acids with different functional groups by growing minerals are distinct. For 11 amino acids, the d-isomer slows dynamic gypsum growth more than the l-isomer, whereas for another 7 amino acids, the opposite was observed. These differences in chiral recognition are attributed to the different stereochemical matching between the chiral amino acids and the dynamic steps of growing gypsum. These stereoselective interactions between amino acid enantiomers and dynamic growing crystals can be applied toward the fabrication of gypsum cements to regulate their structure and mechanical properties. These findings provide insight into understanding the mechanism of the origin of homochirality in nature and suggest a pathway for constructing advanced functional materials.

A superstable, flexible, and scalable nanofluidic ion regulation composite membrane.

Two-dimensional layered membranes with high and stable ion transport properties have various applications in nanofluidic devices; however, their construction remains a considerable challenge. Herein, we develop a superstable aramid nanofiber/graphite composite membrane with numerous one-dimensional and two-dimensional nano-confined interspaces for ultrafast ion transport. The fabricated flexible and scalable membrane exhibits high tensile strength (∼115.3 MPa) even after immersion in water for 90 days. Further, the aramid nanofiber/graphite conductor features the surface-charge-governed ion transport behavior. The ionic conductivity of the membrane at a low potassium chloride concentration of 10-4 mol/L can be enhanced by 16 times that of the bulk counterpart. More importantly, its structure and ionic conductivity remain unchanged even after immersion in different harsh solutions (e.g., acid, base, and ethanol) for over 30 days. Molecular dynamics simulations reveal that the superstability of the membrane is attributable to the robust interchain interactions within the aramid nanofibers and the strong interfacial interactions between the aramid nanofibers and graphite nanosheets. This study highlights the superior structural stability of the proposed flexible and scalable aramid nanofiber/graphite composite membrane, which could be employed in advanced nanofluidic devices for application under extreme working environments.

Production of gas-releasing electrolyte-replenishing Ah-scale zinc metal pouch cells with aqueous gel electrolyte.

Aqueous zinc batteries are ideal candidates for grid-scale energy storage because of their safety and low-cost aspects. However, the production of large-format aqueous Zn batteries is hindered by electrolyte consumption, hydrogen gas evolution and accumulation, and Zn dendrites growth. To circumvent these issues, here we propose an "open" pouch cell design for large-format production of aqueous Zn batteries, which can release hydrogen gas and allow the refilling of the electrolyte components consumed during cell cycling. The cell uses a gel electrolyte containing crosslinked kappa (k)-carrageenan and chitosan. It bonds water molecules and hinders their side reaction with Zn, preventing electrolyte leakage and fast evaporation. As a proof-of-concept, we report the assembly and testing of a Zn | |ZnxV2O5·nH2O multi-layer "open" pouch cell using the carrageenan/chitosan gel electrolyte, which delivers an initial discharge capacity of 0.9 Ah and 84% capacity retention after 200 cycles at 200 mA g‒1, 370 kPa and 25 °C.

Self-assembled hyaluronic acid-coated nanocomplexes for targeted delivery of curcumin alleviate acute kidney injury.

Acute kidney injury (AKI) is a pathological process with high morbidity, and drug resistance is easy to occur due to untargeted drug therapy. Curcumin can repair acute kidney injury. The expression of the CD44 receptor in renal tubular epithelial cells is abnormally elevated during AKI, and hyaluronic acid (HA) has the ability to bind specifically to the CD44 receptor. In this study, we developed a hyaluronic acid-coated liposome (HALP) nanocomplexes that targeted renal epithelial cells and its effect of relieving AKI was investigated. HALP was formed by self-assembly through the electrostatic interaction of curcumin-loaded cationic liposomes (LP) with hyaluronic acid and responds to the release of curcumin in the acidic microenvironment of lesions to treat AKI. HALP had good stability and biocompatibility. The in vitro results showed that compared to LP, HALP exhibited higher antioxidant, anti-inflammatory, and anti-apoptotic capacities. The AKI model suggested that HALP could not only target and accumulate in the injured kidney but also had an excellent ability to reduce the inflammatory response, which decreased tubular necrosis and restored kidney function.

Highly Elastic Hydrated Cellulosic Materials with Durable Compressibility and Tunable Conductivity.

Anisotropic cellular materials with direction-dependent structure and durable mechanical properties enable various applications (e.g., nanofluidics, biomedical devices, tissue engineering, and water purification), but their widespread use is often hindered by complex and scale-limited fabrication and unsatisfactory mechanical performance. Here, inspired by the anisotropic and hierarchical material structure of tendons, we demonstrate a facile, scalable top-down approach for fabricating a highly elastic, ionically conductive, anisotropic cellulosic material (named elastic wood) directly from natural wood via chemical treatment. The resulting elastic wood demonstrates good elasticity and durable compressibility, showing no sign of fatigue after 10 000 compression cycles. The chemical treatment not only softens the wood cell walls by partially removing lignin and hemicellulose but introduces an interconnected cellulose fibril network into the wood channels. Atomistic and continuum modeling further reveals that the absorbed water can freely and reversibly move inside the elastic wood and therefore helps the elastic wood accommodate large compressive deformation and recover to its original shape upon compression release. In addition, the elastic wood showed a high ionic conductivity of up to 0.5 mS cm-1 at a low KCl concentration of 10-4 M, which can be tuned by changing the compression ratio of the material. The demonstrated elastic, mechanically robust, and ionically conductive cellulosic material combining inherited anisotropic cellular structure from natural wood and a self-formed internal gel may find a variety of potential applications in ionic nanofluidics, sensors, soft robots, artificial muscle, environmental remediation, and energy storage.

[Tachyarrhythmia caused by low-dose norepinephrine: a case report].

Norepinephrine (NE) can raise blood pressure and speed up heart rate. However, because its effect of raising heart rate is less than that of reflex reduction of heart rate caused by the increase of blood pressure, NE causes more heart rate decrease in patients. A case of tachyarrhythmia caused by low dose NE was admitted to department of intensive care unit (ICU) of Shijiazhuang Third Hospital. The heart rate of the patient increased with the elevation of NE application dose. A variety of antiarrhythmic drugs was invalid. The related examination was prescribed to eliminate the cause of arrhythmia caused by the disorder of electrolysis and thyroid function, and found that heart rate decreased as the dose of NE tapered. After NE was stopped, the patient recovered sinus rhythm. During one month of follow-up, the patient's heart rhythm was normal. Therefore, the occurrence of tachyarrhythmia is related to NE.

Removal of tar derived from biomass gasification via synergy of non-thermal plasma and catalysis.

In this study, the reforming of toluene, as a surrogate for tar, was investigated in plasma-alone (PA) and plasma-catalytic (PC) systems. The effects of feed gas oxygen content (O2/(O2 + N2) = 0, 3, 12, 21, or 30 vol%) and the discharge power (30, 75, or 90 W) on toluene conversion, the selectivity of syngas (H2 + CO), and undesirable liquid by-products were evaluated using the PA system. A maximum toluene conversion of 87.9% and a minimum selectivity of undesirable liquid by-products of 0.53% for ethylbenzene, and 1.24% for benzene, were obtained when the discharge power was 90 W and the oxygen content in the carrier gas was 3 vol%. However, a maximum gas selectivity of 48.4% for H2 and 19.4% for CO was attained when the discharge power was 75 W and the oxygen content was 3 vol% and 12 vol%, respectively. The effect of the steam/carbon molar ratio (S/C) on toluene reforming was investigated using the PC system with Ni/ZSM-5 catalyst under a discharge power of 75 W. The addition of steam to the feed gas significantly enhanced the conversion of toluene to syngas. A maximum toluene conversion of 88.5% was reached with a minimum selectivity of liquid by-products (1.9% for ethylbenzene and 5.2% for benzene) when S/C was 2. However, the highest selectivity of syngas (69.8% for H2 and 21.2% for CO) was achieved when S/C was 2.5. The catalyst employed in the plasma reforming of toluene exhibited excellent anti-carbon deposition performance. A possible reaction mechanism and pathway of toluene destruction was proposed based on analysis of both gaseous and liquid products.

Single Atom Array Mimic on Ultrathin MOF Nanosheets Boosts the Safety and Life of Lithium-Sulfur Batteries.

The development of Li-S batteries is largely impeded by the growth of Li dendrites and polysulfide shuttling. To solve these two problems simultaneously, herein the study reports a "single atom array mimic" on ultrathin metal organic framework (MOF) nanosheet-based bifunctional separator for achieving the highly safe and long life Li-S batteries. In the designed separator, the periodically arranged cobalt atoms coordinated with oxygen atoms (CoO4 moieties) exposed on the surface of ultrathin MOF nanosheets, "single atom array mimic", can greatly homogenize Li ion flux through the strong Li ion adsorption with O atoms at the interface between anode and separator, leading to stable Li striping/plating. Meantime, at the cathode side, the Co single atom array mimic serves as "traps" to suppress polysulfide shuttling by Lewis acid-base interaction. As a result, the Li-S coin cells with the bifunctional separator exhibit a long cycle life with an ultralow capacity decay of 0.07% per cycle over 600 cycles. Even with a high sulfur loading of 7.8 mg cm-2 , an areal capacity of 5.0 mAh cm-2 can be remained after 200 cycles. Moreover, the assembled Li-S pouch cell displays stable cycling performance under various bending angles, demonstrating the potential for practical applications.

Plasma-enhanced steam reforming of different model tar compounds over Ni-based fusion catalysts.

Tar formation during biomass gasification is undesirable due to the decreased energy efficiency and increased costs for maintaining downstream equipment. The hybrid non-thermal plasma-catalysis method is considered to be a promising alternative, since it overcomes the disadvantages arising from both catalyst deactivation during catalytic reforming and the formation of undesirable liquid by-products in plasma reforming. SiO2- and ZSM-5-supported Ni-based catalysts with different Ni loadings (0.5, 1, 3, and 5 wt%) were prepared by thermal fusion and applied to the steam reforming of toluene. Different characterizations of fresh and spent catalysts including XRD, H2-TPR, N2 adsorption-desorption, SEM, TEM, XPS and TGA were conducted to show the properties of catalysts. The results indicated that Ni/ZSM-5 exhibited better performance than Ni/SiO2, due to the increased dispersion of Ni particles and the stronger metal-support interaction of Ni/ZSM-5, which was confirmed by the TEM and H2-TPR results. In addition, the performances of the catalysis-only (CatO), plasma-only (PlO), and in-plasma-catalysis (IPC) systems in steam reforming of different model tar compounds including benzene, toluene, furfural, naphthalene, fluorene and pyrene were compared using Ni(5 wt%)/ZSM-5. Obvious synergistic effects between DBD plasma and Ni(5 wt%)/ZSM-5 was observed for syngas production in the IPC system.

A radiative cooling structural material.

Reducing human reliance on energy-inefficient cooling methods such as air conditioning would have a large impact on the global energy landscape. By a process of complete delignification and densification of wood, we developed a structural material with a mechanical strength of 404.3 megapascals, more than eight times that of natural wood. The cellulose nanofibers in our engineered material backscatter solar radiation and emit strongly in mid-infrared wavelengths, resulting in continuous subambient cooling during both day and night. We model the potential impact of our cooling wood and find energy savings between 20 and 60%, which is most pronounced in hot and dry climates.

Fly-through synthesis of nanoparticles on textile and paper substrates.

The fast and efficient synthesis of nanoparticles on flexible and lightweight substrates is increasingly critical for various medical and wearable applications. However, conventional high temperature (high-T) processes for nanoparticle synthesis are intrinsically incompatible with temperature-sensitive substrates, including textiles and paper (i.e. low-T substrates). In this work, we report a non-contact, 'fly-through' method to synthesize nanoparticles on low-T substrates by rapid radiative heating under short timescales. As a demonstration, textile substrates loaded with platinum (Pt) salt precursor are rapidly heated and quenched as they move across a 2000 K heating source at a continuous production speed of 0.5 cm s-1. The rapid radiative heating method induces the thermal decomposition of various precursor salts and nanoparticle formation, while the short duration ensures negligible change to the respective low-T substrate along with greatly improved production efficiency. The reported method can be generally applied to the synthesis of metal nanoparticles (e.g. gold and ruthenium) on various low-T substrates (e.g. paper). The non-contact and continuous 'fly-through' synthesis offers a robust and efficient way to synthesize supported nanoparticles on flexible and lightweight substrates. It is also promising for ultrafast and roll-to-roll manufacturing to enable viable applications.

Cellulose ionic conductors with high differential thermal voltage for low-grade heat harvesting.

Converting low-grade heat into useful electricity requires a technology that is efficient and cost effective. Here, we demonstrate a cellulosic membrane that relies on sub-nanoscale confinement of ions in oxidized and aligned cellulose molecular chains to enhance selective diffusion under a thermal gradient. After infiltrating electrolyte into the cellulosic membrane and applying an axial temperature gradient, the ionic conductor exhibits a thermal gradient ratio (analogous to the Seebeck coefficient in thermoelectrics) of 24 mV K-1-more than twice the highest value reported until now. We attribute the enhanced thermally generated voltage to effective sodium ion insertion into the charged molecular chains of the cellulosic membrane, which consists of type II cellulose, while this process does not occur in natural wood or type I cellulose. With this material, we demonstrate a flexible and biocompatible heat-to-electricity conversion device via nanoscale engineering based on sustainable materials that can enable large-scale manufacture.

Isotropic Paper Directly from Anisotropic Wood: Top-Down Green Transparent Substrate Toward Biodegradable Electronics.

Flexible electronics have found useful applications in both the scientific and industrial communities. However, substrates traditionally used for flexible electronics, such as plastic, cause many environmental issues. Therefore, a transparent substrate made from natural materials provides a promising alternative because it can be degraded in nature. The traditional bottom-up fabrication method for transparent paper is expensive, environmentally unfriendly, and time-consuming. In this work, for the first time, we developed a top-down method to fabricate isotropic, transparent paper directly from anisotropic wood. The top-down method includes two steps: a delignification process to bleach the wood by lignin removal and a pressing process for removing light-reflecting and -scattering sources. The resulting isotropic, transparent paper has high transmittance of about 90% and high haze over 80% and is demonstrated as a nature-disposable substrate for electronic/optical devices. Adjusting the pressing ratio used changes the density of the resulting paper, which tunes the microstructure-related properties of the isotropic, transparent paper. This top-down method is simple, fast, environmentally friendly, and cost-effective, which can greatly promote the development of paper-based green optical and electronic devices.

From Wood to Textiles: Top-Down Assembly of Aligned Cellulose Nanofibers.

Advanced textiles made of macroscopic fibers are usually prepared from synthetic fibers, which have changed lives over the past century. The shortage of petrochemical resources, however, greatly limits the development of the textile industry. Here, a facile top-down approach for fabricating macroscopic wood fibers for textile applications (wood-textile fibers) comprising aligned cellulose nanofibers directly from natural wood via delignification and subsequent twisting is demonstrated. Inherently aligned cellulose nanofibers are well retained, while the microchannels in the delignified wood are squeezed and totally removed by twisting, resulting in a dense structure with approximately two times higher mechanical strength (106.5 vs 54.9 MPa) and ≈20 times higher toughness (7.70 vs 0.36 MJ m-3 ) than natural wood. Dramatically different from natural wood, which is brittle in nature, the resultant wood-textile fibers are highly flexible and bendable, likely due to the twisted structures. The wood-textile fibers also exhibit excellent knitting properties and dyeability, which are critical for textile applications. Furthermore, functional wood-textile fibers can be achieved by preinfiltrating functional materials in the delignified wood film before twisting. This top-down approach of fabricating aligned macrofibers is simple, scalable, and cost-effective, representing a promising direction for the development of smart textiles and wearable electronics.

Anisotropic, lightweight, strong, and super thermally insulating nanowood with naturally aligned nanocellulose.

There has been a growing interest in thermal management materials due to the prevailing energy challenges and unfulfilled needs for thermal insulation applications. We demonstrate the exceptional thermal management capabilities of a large-scale, hierarchal alignment of cellulose nanofibrils directly fabricated from wood, hereafter referred to as nanowood. Nanowood exhibits anisotropic thermal properties with an extremely low thermal conductivity of 0.03 W/m·K in the transverse direction (perpendicular to the nanofibrils) and approximately two times higher thermal conductivity of 0.06 W/m·K in the axial direction due to the hierarchically aligned nanofibrils within the highly porous backbone. The anisotropy of the thermal conductivity enables efficient thermal dissipation along the axial direction, thereby preventing local overheating on the illuminated side while yielding improved thermal insulation along the backside that cannot be obtained with isotropic thermal insulators. The nanowood also shows a low emissivity of <5% over the solar spectrum with the ability to effectively reflect solar thermal energy. Moreover, the nanowood is lightweight yet strong, owing to the effective bonding between the aligned cellulose nanofibrils with a high compressive strength of 13 MPa in the axial direction and 20 MPa in the transverse direction at 75% strain, which exceeds other thermal insulation materials, such as silica and polymer aerogels, Styrofoam, and wool. The excellent thermal management, abundance, biodegradability, high mechanical strength, low mass density, and manufacturing scalability of the nanowood make this material highly attractive for practical thermal insulation applications.

Processing bulk natural wood into a high-performance structural material.

Synthetic structural materials with exceptional mechanical performance suffer from either large weight and adverse environmental impact (for example, steels and alloys) or complex manufacturing processes and thus high cost (for example, polymer-based and biomimetic composites). Natural wood is a low-cost and abundant material and has been used for millennia as a structural material for building and furniture construction. However, the mechanical performance of natural wood (its strength and toughness) is unsatisfactory for many advanced engineering structures and applications. Pre-treatment with steam, heat, ammonia or cold rolling followed by densification has led to the enhanced mechanical performance of natural wood. However, the existing methods result in incomplete densification and lack dimensional stability, particularly in response to humid environments, and wood treated in these ways can expand and weaken. Here we report a simple and effective strategy to transform bulk natural wood directly into a high-performance structural material with a more than tenfold increase in strength, toughness and ballistic resistance and with greater dimensional stability. Our two-step process involves the partial removal of lignin and hemicellulose from the natural wood via a boiling process in an aqueous mixture of NaOH and Na2SO3 followed by hot-pressing, leading to the total collapse of cell walls and the complete densification of the natural wood with highly aligned cellulose nanofibres. This strategy is shown to be universally effective for various species of wood. Our processed wood has a specific strength higher than that of most structural metals and alloys, making it a low-cost, high-performance, lightweight alternative.

MicroRNA-103 suppresses glioma cell proliferation and invasion by targeting the brain-derived neurotrophic factor.

Glioma is the most common and aggressive of malignant brain tumours. MicroRNAs (miRNAs/miRs) are involved in tumour development of various human cancers, including glioma. Therefore, miRNAs may have potential tumour diagnostic, prognostic and therapeutic values in human glioma. miR­103 is abnormally expressed in various human cancer types. However, the detailed expression pattern, biological functions and underlying molecular mechanism of miR­103 in glioma remain unclear. Therefore, the present study aimed to investigate the expression, biological roles and underlying mechanisms of miR­103 in glioma. Results of the present study demonstrated that miR­103 was significantly down­regulated in glioma tissues and cell lines. Functional experiments demonstrated that miR­103 overexpression inhibited the proliferation and invasion of glioma cells in vitro. Additionally, brain­derived neurotrophic factor (BDNF) was identified as a direct functional target of miR­103 in glioma. Furthermore, mRNA and protein expression levels of BDNF were highly upregulated in glioma tissues compared with normal brain tissues. Spearman's correlation analysis indicated a negative association between miR­103 and BDNF mRNA expression levels in glioma tissues. Furthermore, rescue experiments demonstrated that BDNF up­regulation reversed the suppressive effects of miR­103 on glioma cell proliferation and invasion. Therefore, the authors of the present study hypothesized that the interaction between miR­103 and BDNF serves a role in glioma progression and, in the future, may serve as a therapeutic target for glioma treatment.

Highly Compressible, Anisotropic Aerogel with Aligned Cellulose Nanofibers.

Aerogels can be used in a broad range of applications such as bioscaffolds, energy storage devices, sensors, pollutant treatment, and thermal insulating materials due to their excellent properties including large surface area, low density, low thermal conductivity, and high porosity. Here we report a facile and effective top-down approach to fabricate an anisotropic wood aerogel directly from natural wood by a simple chemical treatment. The wood aerogel has a layered structure with anisotropic structural properties due to the destruction of cell walls by the removal of lignin and hemicellulose. The layered structure results in the anisotropic wood aerogel having good mechanical compressibility and fragility resistance, demonstrated by a high reversible compression of 60% and stress retention of ∼90% after 10 000 compression cycles. Moreover, the anisotropic structure of the wood aerogel with curved layers stacking layer-by-layer and aligned cellulose nanofibers inside each individual layer enables the wood aerogel to have an anisotropic thermal conductivity with an anisotropy factor of ∼4.3. An extremely low thermal conductivity of 0.028 W/m·K perpendicular to the cellulose alignment direction and a thermal conductivity of 0.12 W/m·K along the cellulose alignment direction can be achieved. The thermal conductivity is not only much lower than that of the natural wood material (by ∼3.6 times) but also lower than most of the commercial thermal insulation materials. The top-down approach is low-cost, scalable, simple, yet effective, representing a promising direction for the fabrication of high-quality aerogel materials.

Three-Dimensional Printed Thermal Regulation Textiles.

Space cooling is a predominant part of energy consumption in people's daily life. Although cooling the whole building is an effective way to provide personal comfort in hot weather, it is energy-consuming and high-cost. Personal cooling technology, being able to provide personal thermal comfort by directing local heat to the thermally regulated environment, has been regarded as one of the most promising technologies for cooling energy and cost savings. Here, we demonstrate a personal thermal regulated textile using thermally conductive and highly aligned boron nitride (BN)/poly(vinyl alcohol) (PVA) composite (denoted as a-BN/PVA) fibers to improve the thermal transport properties of textiles for personal cooling. The a-BN/PVA composite fibers are fabricated through a fast and scalable three-dimensional (3D) printing method. Uniform dispersion and high alignment of BN nanosheets (BNNSs) can be achieved during the processing of fiber fabrication, leading to a combination of high mechanical strength (355 MPa) and favorable heat dispersion. Due to the improved thermal transport property imparted by the thermally conductive and highly aligned BNNSs, better cooling effect (55% improvement over the commercial cotton fiber) can be realized in the a-BN/PVA textile. The wearable a-BN/PVA textiles containing the 3D-printed a-BN/PVA fibers offer a promising selection for meeting the personal cooling requirement, which can significantly reduce the energy consumption and cost for cooling the whole building.

Highly Anisotropic Conductors.

Composite materials with ordered microstructures often lead to enhanced functionalities that a single material can hardly achieve. Many biomaterials with unusual microstructures can be found in nature; among them, many possess anisotropic and even directional physical and chemical properties. With inspiration from nature, artificial composite materials can be rationally designed to achieve this anisotropic behavior with desired properties. Here, a metallic wood with metal continuously filling the wood vessels is developed, which demonstrates excellent anisotropic electrical, thermal, and mechanical properties. The well-aligned metal rods are confined and separated by the wood vessels, which deliver directional electron transport parallel to the alignment direction. Thus, the novel metallic wood composite boasts an extraordinary anisotropic electrical conductivity (σ|| /σ⊥ ) in the order of 1011 , and anisotropic thermal conductivity (κ|| /κ⊥ ) of 18. These values exceed the highest reported values in existing anisotropic composite materials. The anisotropic functionality of the metallic wood enables it to be used for thermal management applications, such as thermal insulation and thermal dissipation. The highly anisotropic metallic wood serves as an example for further anisotropic materials design; other composite materials with different biotemplates/hosts and fillers can achieve even higher anisotropic ratios, allowing them to be implemented in a variety of applications.