RESUMO
VO2 affords ultrafast polysulfide adsorption on account of its oxidation potential, which matches the sulfur working window (1.7-2.8 V). Nevertheless, its nonconductive surface limits direct sulfur conversion. Herein, we gently load carbon quantum dots on VO2 to increase direct Li2S nucleation by enhanced electron conductivity. As a result, the soft-packaged lithium-sulfur pouch cell yields a capacity retention of 88.8% at 0.5C after 100 cycles and a decay rate of 0.17% per cycle over 200 cycles at 2C. The cell energy density of the multilayer cell is up to 386.1 W h kg-1.
RESUMO
The kinetically retarded sulfur evolution reactions and notorious lithium dendrites as the major obstacles hamper the practical implementation of lithium-sulfur batteries (LSBs). Dual metal atom catalysts as a new model are expected to show higher activity by their rational coupling. Herein, the dual-atom catalyst with coupled NiâCo atom pairs (Ni/Co-DAC) is designed successfully by programmed approaches. The NiâCo atom pairs alter the local electron structure and optimize the coordination configuration of Ni/Co-DAC, leading to the coupling effect for promoting the interconversion of sulfur and guiding lithium plating/striping. The LSB delivers a remarkable capacity of 818 mA h g-1 at 3.0 C and a low degeneration rate of 0.053% per cycle over 500 cycles. Moreover, the LSB with a high sulfur mass loading of 6.1 mg cm-2 and lean electrolyte dosage of 6.0 µL mgS -1 shows a remarkable areal capacity of 5.7 mA h cm-2.
RESUMO
Lithium-sulfur (Li-S) batteries suffer from severe polysulfide shuttle, retarded sulfur conversion kinetics and notorious lithium dendrites, which has curtailed the discharge capacity, cycling lifespan and safety. Engineered catalysts act as a feasible strategy to synchronously manipulate the evolution behaviors of sulfur and lithium species. Herein, a chlorine bridge-enabled binuclear copper complex (Cu-2-T) is in situ synthesized in electrolyte as homogeneous catalyst for rationalizing the Li-S redox reactions. The well-designed Cu-2-T provides completely active sites and sufficient contact for homogeneously guiding the Li2S nucleation/decomposition reactions, and stabilizing the lithium working interface according to the synchrotron radiation X-ray 3D nano-computed tomography, small angle neutron scattering and COMSOL results. Moreover, Cu-2-T with the content of 0.25 wt% approaching saturated concentration in electrolyte further boosts the homogeneous optimization function in really operated Li-S batteries. Accordingly, the capacity retention of the Li-S battery is elevated from 51.4% to 86.3% at 0.2 C, and reaches 77.0% at 1.0 C over 400 cycles. Furthermore, the sulfur cathode with the assistance of Cu-2-T realizes the stable cycling under the practical scenarios of soft-packaged pouch cell and high sulfur loading (6.5 mg cm-2 with the electrolyte usage of 4.5 µL mgS -1).
RESUMO
Engineering atom-scale sites are crucial to the mitigation of polysulfide shuttle, promotion of sulfur redox, and regulation of lithium deposition in lithium-sulfur batteries. Herein, a homonuclear copper dual-atom catalyst with a proximal distance of 3.5 Å is developed for lithium-sulfur batteries, wherein two adjacent copper atoms are linked by a pair of symmetrical chlorine bridge bonds. Benefiting from the proximal copper atoms and their unique coordination, the copper dual-atom catalyst with the increased active interface concentration synchronously guide the evolutions of sulfur and lithium species. Such a delicate design breaks through the activity limitation of mononuclear metal center and represents a catalyst concept for lithium-sulfur battery realm. Therefore, a remarkable areal capacity of 7.8 mA h cm-2 is achieved under the scenario of sulfur content of 60 wt.%, mass loading of 7.7 mg cm-2 and electrolyte dosage of 4.8 µL mg-1.
RESUMO
Promoting better thermodynamics and kinetics of electrocatalysts is key to achieving an efficient electrocatalytic oxygen evolution reaction (OER). Utilizing the photothermal effect and micro-electric field of electrocatalysts is a promising approach to promote the sluggish OER. Herein, to reveal the relationship of the photothermal effect and its induced micro-electric field with OER performance, NiSx coupled NiFe(OH)y on nickel foam (NiSx@NiFe(OH)y/NF) is synthesized and subjected to the OER under near-infrared (NIR) light. Owing to the photothermal effect and its induced micro-electric field, the OER performance of NiSx@NiFe(OH)y/NF is significantly enhanced. Compared with no NIR light irradiation, the overpotential at 50 mA cm-2 and the Tafel slope of NiSx@NiFe(OH)y/NF under NIR light irradiation were 234.1 mV and 38.0 mV dec-1, which were lower by 12.4 mV and 7.1 mV dec-1, and it exhibited stable operation at 1.6 V vs. RHE for 8 h with 99% activity maintained. This work presents a novel inspiration to understand the photothermal effect-enhanced electrocatalytic OER.
RESUMO
Organic frameworks-based batteries with excellent physicochemical stability and long-term high capacity will definitely reduce the cost, carbon emissions, and metal consumption and contamination. Here, an ultra-stable and ultra-thin perylene-dicyandiamide-based hydrogen organic framework (HOF) nanosheet (P-DCD) of ≈3.5 nm in thickness is developed. When applied in the cathode, the P-DCD exhibits exceptional long-term capacity retention for alkali-ion batteries (AIBs). Strikingly, for lithium-ion batteries (LIBs), at current of 2 A g-1, the large reversible capacity of 108 mA h g-1 shows no attenuation within 5 000 cycles. For sodium-ion batteries (SIBs), the related capacity retains 91.7% within 10 000 cycles compared to the initial state, significantly much more stable than conventional organic materials reported previously. Mechanism studies through ex situ and in situ experiments and theoretical density functional theory (DFT) calculations reveal that the impressive long-term performance retention originates from the large electron delocalization, fast ion diffusion, and physicochemical stability within the ultra-thin 2D P-DCD, featuring π-π and hydrogen bonding stacking, nitrogen-rich units, and low impedance. The advantageous features demonstrate that rationally designed stable and effective organic frameworks pave the way to utilizing complete organic materials for developing next-generation low-cost and highly stable energy storage batteries.
RESUMO
The gradient temperature was manipulated to construct hollow irregular carbon spheres with regulated intrinsic defects and surface area targeting favorable potassium storage. An enlarged surface area, increased intrinsic defects, and superior conductivity induced more surface-active interfaces. These actions facilitated a high reversible capacity as well as excellent cycling stability.
RESUMO
A drawback with lithium-ion batteries (LIBs) lies in the unstable lithium storage which results in poor electrochemical performance. Therefore, it's of importance to improve the electrochemical functionality and Li-ion transport kinetics of electrode materials for high-performance lithium storage. Here, a subtle atom engineering via injecting molybdenum (Mo) atoms into vanadium disulfide (VS2 ) to boost high capacity Li-ion storage is reported. By combining operando, ex situ monitoring and theoretical simulation, it is confirmed that the 5.0%Mo atoms impart flower-like VS2 with expanded interplanar spacing, lowered Li-ion diffusion energy barrier, and increased Li-ion adsorption property, together with enhanced e- conductivity, to boost Li-ion migration. A "speculatively" optimized 5.0% Mo-VS2 cathode that exhibits a specific capacity of 260.8 mA h g-1 at 1.0 A g-1 together with a low decay of 0.009% per cycle over 500 cycles is demonstrated. It is shown that this value is ≈1.5 times compared with that for bare VS2 cathode. This investigation has substantiated the Mo atom doping can effectively guide the Li-ion storage and open new frontiers for exploiting high-performance transition metal dichalcogenides for LIBs.
RESUMO
Lithium-sulfur (Li-S) batteries are considered as one of the most promising candidates to achieve an energy density of 500 Wh kgâ»1 . However, the challenges of shuttle effect, sluggish sulfur conversion kinetics, and lithium-dendrite growth severely obstruct their practical implementation. Herein, multiscale V2 C MXene (VC) with a spherical confinement structure is designed as a high-efficiency bifunctional promotor for the evolution of sulfur and lithium species in Li-S batteries. Combining synchrotron X-ray 3D nano-computed tomography (X-ray 3D nano-CT), small-angle neutron scattering (SANS), and first-principle calculations, it is revealed that the activity of VC can be maximized by tuning the scale, and the as-attained functions are conducted as follows: (i) the VC acts as the efficient lithium polysulfide (LiPS) scavenger due to the large number of active sites; (ii) the VC exhibits significantly improved electrocatalytic function for the Li2 S nucleation and decomposition reaction kinetics owing to the scale effect; and (iii) the VC can regulate the dynamic behavior of Li-ions and thus stabilize the lithium plating/stripping effectively on account of the unique ion-sieving effect.
RESUMO
The fast electrochemical kinetics behavior and long cycling life have been the goals in developing anode materials for potassium ion batteries (PIBs). On account of high electron conductivity and theoretical capacity, transition metal selenides have been deemed as one of the promising anode materials for PIBs. Herein, a systematic structural manipulation strategy, pertaining to the confine of Fe3 Se4 particles by 3D graphene and the dual phosphorus (P) doping to the Fe3 Se4 /3DG (DP-Fe3 Se4 /3DG), has been proposed to fulfill the efficient potassium-ion (K-ion) evolution kinetics and thus boost the K-ion storage performance. The theoretical calculation results demonstrate that the well-designed dual P doping interface can effectively promote K-ion adsorption behavior and provide a low energy barrier for K-ion diffusion. The insertion-conversion and adsorption mechanism for multi potassium storage behavior in DP-Fe3 Se4 /3DG composite has been also deciphered by combining the in situ/ex situ X-ray diffraction and operando Raman spectra evidences. As expected, the DP-Fe3 Se4 /3DG anode exhibits superior rate capability (120.2 mA h g-1 at 10 A g-1 ) and outstanding cycling performance (157.9 mA h g-1 after 1000 cycles at 5 A g-1 ).
RESUMO
The viability of lithium-sulfur (Li-S) batteries toward real implementation directly correlates with unlocking lithium polysulfide (LiPS) evolution reactions. Along this line, designing promotors with the function of synchronously relieving LiPS shuttle and promoting sulfur conversion is critical. Herein, the nitrogen evolution on hierarchical and atomistic Ni-N-C electrocatalyst, mainly pertaining to the essential subtraction, reservation and coordination of nitrogen atoms, is manipulated to attain favorable Li-S pouch cell performances. Such rational evolution behavior realizes the "nitrogen balance" in simultaneously regulating the Ni-N coordination environment, Ni single atom loading, abundant vacancy defects, active nitrogen and electron conductivity, and maximizing the electrocatalytic activity elevation of Ni-N-C system. With such merit, the cathode harvests favorable performances in a soft-packaged pouch cell prototype even under high sulfur mass loading and lean electrolyte usage. A specific energy density up to 405.1 Wh kg-1 is harvested by the 0.5-Ah-level pouch cell.
RESUMO
V8C7/phosphorus defect-integrated carbon (VPC) is proposed as a dual-function promoter for Li-S chemistry. The well-dispersed V8C7 and phosphorus defects exhibit ample polar sites and remarkable electron conductivity. Such rational integration of dual active centers simultaneously suppresses the shuttle effect and propels the Li-S redox reaction kinetics. Therefore, the S/VPC cathode shows an initial capacity of 1090.0 mA h g-1 and a high retention of 83.5% at 0.2C after 100 cycles and a low decay rate of 0.076% at 2C over 600 cycles.
RESUMO
Prussian blue analogs (PBAs) with unique structure show great potential for aqueous potassium-ion batteries (AKIBs). Herein, K2Co[Fe(CN)6] and KNi[Co(CN)6] architectures are developed as the cathode candidates for AKIBs. Moreover, the reaction kinetics detection and DFT calculations are employed to analyse the battery performances.
RESUMO
Lithium-sulfur batteries (LSBs) have attracted much attention due to their high theoretical specific capacity, energy density and low cost. However, the commercial application of LSBs is hindered due to the lithium polysulfide (LiPS) shuttle as well as the sluggish reaction kinetics. Herein, cobalt selenide (Co0.85Se) nanowire arrays have been constructed on a carbon-modified separator by an in-situ electrodeposition technique without any other post-treatments such as coating with other ancillary materials. The introduced three-dimensional (3D) conductive carbon layer comprising of carbon nanotube (CNT) and acetylene black (AB) not only serves as the effective support for Co0.85Se (CS) but also builds a hierarchical structure to promote the e- transfer. The as-obtained CS-CNT/AB presents a strong anchoring effect on LiPSs and high electrocatalytic activity for sulfur reaction kinetics. As a result, the LSBs inserted with electrodeposition-enabled CS modified separator exhibit an outstanding rate capability (1560.4 mAh g-1 at 0.1 C) and relatively low capacity decay of only 0.068% per cycle over 500 cycles at 2.0 C. This study provides a promising strategy to realize the rational construction of high-efficiency and long-life LSBs.
RESUMO
Li-S batteries (LSBs) have received extensive attention owing to their remarkable theoretical capacity (1672 mA h g-1) and high energy density (2600 W h kg-1), which are far beyond those of the state-of-the-art Li-ion batteries (LIBs). However, the retarded sulfur reaction kinetics and fatal shuttle effect have hindered the practical implementations of LSBs. In response, constructing electrocatalysts for Li-S systems has been considered an effective strategy to date. Particularly, size engineering-enabled electrocatalysts show high activity in the sulfur redox reaction, considerably contributing to the latest advances in Li-S system research. In this tutorial review, we provide a systematic summary of nano- to atomic-scale electrocatalysts employed in Li-S chemistry, aiming at figuring out the working mechanism of size engineering-enabled electrocatalysts in the sulfur redox reaction and guiding the rational construction of advanced LSBs toward practically viable applications.
RESUMO
Porous carbon and metal oxides/sulfides prepared by using metal-organic frameworks (MOFs) as the precursors have been widely applied to the realm of supercapacitors. However, employing MOF-derived metal phosphides as positive and negative electrode materials for supercapacitors has scarcely been reported thus far. Herein, two types of MOFs are used as the precursors to prepare CoP and FeP4 nanocubes through a two-step controllable heat treatment process. Due to the advantages of composition and structure, the specific capacitances of FeP4 and CoP nanocubes reach 345 and 600 F g-1 at the current density of 1 A g-1 , respectively. Moreover, a quasi-solid-state asymmetric supercapacitor is assembled based on charge matching principle by employing CoP and FeP4 nanocubes as the positive and negative electrodes, respectively, which exhibits a high energy density of 46.38 Wh kg-1 at the power density of 695 W kg-1 . Furthermore, a solar-charging power system is assembled by combining the quasi-solid-state asymmetric supercapacitor and monocrystalline silicon plates, substantiating that the device can power the toy electric fan. This work paves a practical way toward the rational design of quasi-solid-state asymmetry supercapacitors systems affording favorable energy density and long lifespan.
RESUMO
Lithium-sulfur (Li-S) batteries are recognized as one of the most promising energy storage systems due to the high energy density and cost effectiveness. However, their practical implementation has still been handicapped due to notorious lithium polysulfide (LiPS) shuttle and depressed sulfur redox kinetics. It is therefore desirable to exploit key mediators synergizing electrical conductivity and electrocatalytic activity for the cathode. Herein, we report the employment of atmospheric pressure chemical vapor deposition to harness the efficient and controllable synthesis of metallic VTe2 over particulated MgO substrates, which has scarcely been demonstrated by conventional wet-chemical synthetic routes thus far. The thus-derived VTe2@MgO heterostructure as an efficient promotor enables effective regulation of LiPSs with respect to polysulfide capture/conversion and Li2S decomposition. As a result, a S/VTe2@MgO cathode with a sulfur loading of 1.6 mg cm-2 harvests long-term cyclability with a negligible capacity decay of 0.055% per cycle over 1000 cycles at 1.0 C. Even at a sulfur loading of 6.9 mg cm-2, the cathode still delivers electrochemical performances that can rival the state-of-the-art high-loading counterparts. Our work might offer a feasible solution for developing heterostructured promotors with multifunctionality and electrocatalytic activity for high-performance Li-S batteries.
RESUMO
Mass production of graphene powders affording high quality and environmental benignancy serves as a prerequisite for the practical usage of graphene in multiple energy storage applications. Herein, we exploit a salt-templated CVD approach to harness the direct synthesis of nitrogen-doped graphene (NG) nanosheets and related ink dispersions in a scalable, safe, efficient, and green fashion. Thus-fabricated NG accompanying large productivity, excellent electrical conductivity, and favorable solution processability possesses implications in printable energy storage devices. With the NG-based ink in hand, self-standing 3D architectures with programmable patterns can be directly printed over a myriad of substrates. Accordingly, both electrode preparation for flexible supercapacitors and separator modification in Li-S batteries can be enabled via printing by employing our NG-based composite inks. This work thus represents a practical route for mass production of graphene inks with cost-effectiveness and eco-friendliness for emerging energy storage technology.
RESUMO
Lithium-sulfur (Li-S) batteries have now emerged as the next-generation rechargeable energy storage system because of the high energy density and theoretical capacity. However, the notorious "lithium polysulfide (LiPS) shuttle" and sluggish kinetics in sulfur redox have posted great threat to their practical applications. Herein, we develop a VN-modified separator as an effective promoter to regulate the LiPSs and accelerate the electrochemical kinetics of Li-S batteries. Benefiting from the dense packing structure and polar surface of porous VN, the VN-modified separator favorably synergizes bifunctionality of physical confinement and chemical entrapment toward LiPSs while affording smooth lithium-ion migration. In addition, the superb electrical conductivity of VN also propels the LiPS conversion. With these advantages, thus-integrated batteries with VN-modified separator exhibit an average capacity decay of 0.077% per cycle at 1 C for 800 cycles. A reasonable areal capacity of 4.2 mAh cm-2 is achieved even with a high sulfur mass loading of 3.8 mg cm-2 at 0.2 C. The present work offers a rational strategy to regulate the LiPS behavior and guide the sulfur redox kinetics toward effective and long-life Li-S batteries.