Extravasation of biodegradable microspheres in the rat brain.

Drug development for neurological diseases is greatly impeded by the presence of the blood-brain barrier (BBB). We and others previously reported on extravasation of micrometer-sized particles from the cerebral microcirculation - across the BBB - into the brain tissue over the course of several weeks. This mechanism could potentially be used for sustained parenchymal drug delivery after extravasation of biodegradable microspheres. As a first step toward this goal, we set out to evaluate the extravasation potential in the rat brain of three classes of biodegradable microspheres with drug-carrying potential, having a median diameter of 13 µm (80% within 8-18 µm) and polyethylene glycol concentrations of 0%, 24% and 36%. Extravasation, capillary recanalization and tissue damage were determined in a rat cerebral microembolization model at day 14 after microsphere injection. Microspheres of all three classes had the potential to extravasate from the vessel into the brain parenchyma, with microspheres without polyethylene glycol extravasating the fastest. Microembolization with biodegradable microspheres led to impaired local capillary perfusion, which was substantially restored after bead extravasation. We did not observe overt tissue damage after microembolization with any microsphere: we found very limited BBB disruption (IgG extravasation), no microgliosis (Iba1 staining) and no large neuronal infarctions (NeuN staining). In conclusion, biodegradable microspheres with different polymer compositions can extravasate into the brain parenchyma while causing minimal tissue damage.

A Single Injection with Sustained-Release Microspheres and a Prime-Boost Injection of Bovine Serum Albumin Elicit the Same IgG Antibody Response in Mice.

Although vaccination is still considered to be the cornerstone of public health care, the increase in vaccination coverage has stagnated for many diseases. Most of these vaccines require two or three doses to be administered across several months or years. Single-injection vaccine formulations are an effective method to overcome the logistical barrier to immunization that is posed by these multiple-injection schedules. Here, we developed subcutaneously (s.c.) injectable microspheres with a sustained release of the model antigen bovine serum albumin (BSA). The microspheres were composed of blends of two novel biodegradable multi-block copolymers consisting of amorphous, hydrophilic poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) (PCL-PEG-PCL) blocks and semi-crystalline poly(dioxanone) (PDO) blocks of different block sizes. In vitro studies demonstrated that the release of BSA could be tailored over a period of approximately four to nine weeks by changing the blend ratio of both polymers. Moreover, it was found that BSA remained structurally intact during release. Microspheres exhibiting sustained release of BSA for six weeks were selected for the in vivo study in mice. The induced BSA-specific IgG antibody titers increased up to four weeks after administration and were of the same magnitude as found in mice that received a priming and a booster dose of BSA in phosphate-buffered saline (PBS). Determination of the BSA concentration in plasma showed that in vivo release probably took place up to at least four weeks, although plasma concentrations peaked already one week after administration. The sustained-release microspheres might be a viable alternative to the conventional prime-boost immunization schedule, but a clinically relevant antigen should be incorporated to assess the full potential of these microspheres in practice.

Intracoronary Administration of Microencapsulated HGF in a Reperfused Myocardial Infarction Swine Model.

Therapy microencapsulation allows minimally invasive, safe, and effective administration. Hepatocyte growth factor (HGF) has angiogenic, anti-inflammatory, anti-apoptotic, and anti-fibrotic properties. Our objective was to evaluate the cardiac safety and effectiveness of intracoronary (IC) administration of HGF-loaded extended release microspheres in an acute myocardial infarction (AMI) swine model. An IC infusion of 5 × 106 HGF-loaded microspheres (MS+HGF, n = 7), 5 × 106 placebo microspheres (MS, n = 7), or saline (SAL, n = 7) was performed two days after AMI. TIMI flow and Troponin I (TnI) values were assessed pre- and post-treatment. Cardiac function was evaluated with magnetic resonance imaging (cMR) before injection and at 10 weeks. Plasma cytokines were determined to evaluate the inflammatory profile and hearts were subjected to histopathological evaluation. Post-treatment coronary flow was impaired in five animals (MS+HGF and MS group) without significant increases in TnI. One animal (MS group) died during treatment. There were no significant differences between groups in cMR parameters at any time (p > 0.05). No statistically significant changes were found between groups neither in cytokines nor in histological analyses. The IC administration of 5 × 106 HGF-loaded-microspheres 48 h post-AMI did not improve cardiac function, nor did it decrease inflammation or cardiac fibrosis in this experimental setting.

An overview of the production methods for core-shell microspheres for parenteral controlled drug delivery.

Core-shell microspheres hold great promise as a drug delivery system because they offer several benefits over monolithic microspheres in terms of release kinetics, for instance a reduced initial burst release, the possibility of delayed (pulsatile) release, and the possibility of dual-drug release. Also, the encapsulation efficiency can significantly be improved. Various methods have proven to be successful in producing these core-shell microspheres, both the conventional bulk emulsion solvent evaporation method and methods in which the microspheres are produced drop by drop. The latter have become increasingly popular because they provide improved control over the particle characteristics. This review assesses various production methods for core-shell microspheres and summarizes the characteristics of formulations prepared by the different methods, with a focus on their release kinetics.

Assessing the Effects of VEGF Releasing Microspheres on the Angiogenic and Foreign Body Response to a 3D Printed Silicone-Based Macroencapsulation Device.

Macroencapsulation systems have been developed to improve islet cell transplantation but can induce a foreign body response (FBR). The development of neovascularization adjacent to the device is vital for the survival of encapsulated islets and is a limitation for long-term device success. Previously we developed additive manufactured multi-scale porosity implants, which demonstrated a 2.5-fold increase in tissue vascularity and integration surrounding the implant when compared to a non-textured implant. In parallel to this, we have developed poly(ε-caprolactone-PEG-ε-caprolactone)-b-poly(L-lactide) multiblock copolymer microspheres containing VEGF, which exhibited continued release of bioactive VEGF for 4-weeks in vitro. In the present study, we describe the next step towards clinical implementation of an islet macroencapsulation device by combining a multi-scale porosity device with VEGF releasing microspheres in a rodent model to assess prevascularization over a 4-week period. An in vivo estimation of vascular volume showed a significant increase in vascularity (* p = 0.0132) surrounding the +VEGF vs. -VEGF devices, however, histological assessment of blood vessels per area revealed no significant difference. Further histological analysis revealed significant increases in blood vessel stability and maturity (** p = 0.0040) and vessel diameter size (*** p = 0.0002) surrounding the +VEGF devices. We also demonstrate that the addition of VEGF microspheres did not cause a heightened FBR. In conclusion, we demonstrate that the combination of VEGF microspheres with our multi-scale porous macroencapsulation device, can encourage the formation of significantly larger, stable, and mature blood vessels without exacerbating the FBR.

Microfluidic Production of Polymeric Core-Shell Microspheres for the Delayed Pulsatile Release of Bovine Serum Albumin as a Model Antigen.

For many vaccines, multiple injections are required to confer protective immunity against targeted pathogens. These injections often consist of a primer administration followed by a booster administration of the vaccine a few weeks or months later. A single-injection vaccine formulation that provides for both administrations could greatly improve the convenience and vaccinee's compliance. In this study, we developed parenterally injectable core-shell microspheres with a delayed pulsatile release profile that could serve as the booster in such a vaccine formulation. These microspheres contained bovine serum albumin (BSA) as the model antigen and poly(dl-lactide-co-glycolide) (PLGA) with various dl-lactide:glycolide monomer ratios as the shell material. Highly monodisperse particles with different particle characteristics were obtained using a microfluidic setup. All formulations exhibited a pulsatile in vitro release of BSA after an adjustable lag time. This lag time increased with the increasing lactide content of the polymer and ranged from 3 to 7 weeks. Shell thickness and bovine serum albumin loading had no effect on the release behavior, which could be ascribed to the degradation mechanism of the polymer, with bulk degradation being the main pathway. Co-injection of the core-shell microspheres together with a solution of the antigen that serves as the primer would allow for the desired biphasic release profile. Altogether, these findings show that injectable core-shell microspheres combined with a primer are a promising alternative for the current multiple-injection vaccines.

Microencapsulated Insulin-Like Growth Factor-1 therapy improves cardiac function and reduces fibrosis in a porcine acute myocardial infarction model.

Insulin-like growth factor-1 (IGF-1) has demonstrated beneficial effects after myocardial infarction (MI). Microencapsulation of IGF-1 could potentially improve results. We aimed to test the effect of an intracoronary (IC) infusion of microencapsulated IGF-1 in a swine acute MI model. For that purpose IC injection of a 10 ml solution of 5 × 106 IGF-1 loaded microspheres (MSPs) (n = 8, IGF-1 MSPs), 5 × 106 unloaded MSPs (n = 9; MSPs) or saline (n = 7; CON) was performed 48 hours post-MI. Left ventricular ejection fraction (LVEF), indexed ventricular volumes and infarct size (IS) were determined by cardiac magnetic resonance at pre-injection and 10 weeks. Animals were euthanized at 10 weeks, and myocardial fibrosis and vascular density were analysed. End-study LVEF was significantly greater in IGF-1 MSPs compared to MSPs and CON, while ventricular volumes exhibited no significant differences between groups. IS decreased over time in all groups. Collagen volume fraction on the infarct area was significantly reduced in IGF-1 MSPs compared to CON and MSPs. Vascular density analysis of infarct and border zones showed no significant differences between groups. In conclusion, the IC injection of 5 × 106 IGF-1 loaded MSPs in a porcine acute MI model successfully improves cardiac function and limits myocardial fibrosis, which could be clinically relevant.

Vascular Endothelial Growth Factor-Releasing Microspheres Based on Poly(ε-Caprolactone-PEG-ε-Caprolactone)-b-Poly(L-Lactide) Multiblock Copolymers Incorporated in a Three-Dimensional Printed Poly(Dimethylsiloxane) Cell Macroencapsulation Device.

Pancreatic islet transplantation is a promising advanced therapy that has been used to treat patients suffering from diabetes type 1. Traditionally, pancreatic islets are infused via the portal vein, which is subsequently intended to engraft in the liver. Severe immunosuppressive treatments are necessary, however, to prevent rejection of the transplanted islets. Novel approaches therefore have focused on encapsulation of the islets in biomaterial implants which can protect the islets and offer an organ-like environment. Vascularization of the device's surface is a prerequisite for the survival and proper functioning of transplanted pancreatic islets. We are pursuing a prevascularization strategy by incorporation of vascular endothelial growth factor (VEGF)-loaded microspheres in 3-dimensional printed poly(dimethylsiloxane)-based devices prior to their prospective loading with transplanted cells. Microspheres (~50 µm) were based on poly(ε-caprolactone-PEG-ε-caprolactone)-b-poly(L-lactide) multiblock copolymers and were loaded with 10 µg VEGF/mg microspheres, and subsequently dispersed in a hyaluronic acid carrier liquid. In vitro release studies at 37°C demonstrated continuous release of fully bioactive VEGF for 4 weeks. In conclusion, our results demonstrate that incorporation of VEGF-releasing microspheres ensures adequate release of VEGF for a time window of 4 weeks, which is attractive in view of the vascularization of artificial pancreas implants.

Sustained Release of Vascular Endothelial Growth Factor from Poly(ε-caprolactone-PEG-ε-caprolactone)-b-Poly(l-lactide) Multiblock Copolymer Microspheres.

Vascular endothelial growth factor (VEGF) is the major regulating factor for the formation of new blood vessels, also known as angiogenesis. VEGF is often incorporated in synthetic scaffolds to promote vascularization and to enhance the survival of cells that have been seeded in these devices. Such applications require sustained local delivery of VEGF of around 4 weeks for stable blood vessel formation. Most delivery systems for VEGF only provide short-term release for a couple of days, followed by a release phase with very low VEGF release. We now have developed VEGF-loaded polymeric microspheres that provide sustained release of bioactive VEGF for 4 weeks. Blends of two swellable poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone)-b-poly(l-lactide) ([PCL-PEG-PCL]-b-[PLLA])-based multiblock copolymers with different PEG content and PEG molecular weight were used to prepare the microspheres. Loading of the microspheres was established by a solvent evaporation-based membrane emulsification method. The resulting VEGF-loaded microspheres had average sizes of 40-50 µm and a narrow size distribution. Optimized formulations of a 50:50 blend of the two multiblock copolymers had an average VEGF loading of 0.79 ± 0.09%, representing a high average VEGF loading efficiency of 78 ± 16%. These microspheres released VEGF continuously over 4 weeks in phosphate-buffered saline pH 7.4 at 37 °C. This release profile was preserved after repeated and long-term storage at -20 °C for up to 9 months, thereby demonstrating excellent storage stability. VEGF release was governed by diffusion through the water-filled polymer matrix, depending on PEG molecular weight and PEG content of the polymers. The bioactivity of the released VEGF was retained within the experimental error in the 4-week release window, as demonstrated using a human umbilical vein endothelial cells proliferation assay. Thus, the microspheres prepared in this study are suitable for embedment in polymeric scaffolds with the aim of promoting their functional vascularization.

Degradation, Intra-Articular Biocompatibility, Drug Release, and Bioactivity of Tacrolimus-Loaded Poly(d-l-lactide-PEG)-b-poly(l-lactide) Multiblock Copolymer-Based Monospheres.

The aim of this study was to develop a formulation with a sustained intra-articular release of the anti-inflammatory drug tacrolimus. Drug release kinetics from the prepared tacrolimus loaded monodisperse biodegradable microspheres based on poly(d-l-lactide-PEG)-b-poly(l-lactide) multiblock copolymers were tunable by changing polymer composition, particularly hydrophobic-hydrophilic block ratio. The monospheres were 30 µm and released the drug, depending on the formulation, in 7 to >42 days. The formulation exhibiting sustained release for 1 month was selected for further in vivo evaluation. Rat knees were injected with three different doses of tacrolimus (10 wt %) loaded monospheres (2.5, 5.0, and 10 mg), contralateral control knees with saline. Micro-CT and histology showed no negative changes on cartilage, indicating good biocompatibility. Minor osteophyte formation was seen in a dose dependent fashion, suggesting local drug release and therapeutic action thereof. To investigate in vivo drug release, tacrolimus monospheres were injected into horse joints, after which multiple blood and synovial fluid samples were taken. Sustained intra-articular release was seen during the entire four-week follow-up, with negligible systemic drug concentrations (<1 ng/mL), confirming the feasibility of local intra-articular drug delivery without provoking systemic effects. Intra-articular injection of unloaded monospheres led to a transient inflammatory reaction, measured by total synovial leucocyte count (72 h). This reaction was significantly lower in joints injected with tacrolimus loaded monospheres, showing not only the successful local tacrolimus delivery but also local anti-inflammatory action. This local anti-inflammatory potential without systemic side-effects can be beneficial in the treatment of inflammatory joint diseases, among which is osteoarthritis.

Degradation, intra-articular retention and biocompatibility of monospheres composed of [PDLLA-PEG-PDLLA]-b-PLLA multi-block copolymers.

In this study, we investigated the use of microspheres with a narrow particle size distribution ('monospheres') composed of biodegradable poly(DL-lactide)-PEG-poly(DL-lactide)-b-poly(L-lactide) multiblock copolymers that are potentially suitable for local sustained drug release in articular joints. Monospheres with sizes of 5, 15 and 30µm and a narrow particle size distribution were prepared by a micro-sieve membrane emulsification process. During in vitro degradation, less crystallinity, higher swelling and accelerated mass loss during was observed with increasing the PEG content of the polymer. The monospheres were tested in both a small (mice/rat) and large animal model (horse). In vivo imaging after injection with fluorescent dye loaded microspheres in mice knees showed that monospheres of all sizes retained within the joint for at least 90days, while the same dose of free dye redistributed to the whole body within the first day after intra-articular injection. Administration of monospheres in equine carpal joints caused a mild transient inflammatory response without any clinical signs and without degradation of the cartilage, as evidenced by the absence of degradation products of sulfated glycosaminoglycans or collagen type 2 in the synovial fluid. The excellent intra-articular biocompatibility was confirmed in rat knees, where µCT-imaging and histology showed neither changes in cartilage quality nor quantity. Given the good intra-articular retention and the excellent biocompatibility, these novel poly(DL-lactide)-PEG-poly(DL-lactide)-b-poly(L-lactide)-based monospheres can be considered a suitable platform for intra-articular drug delivery. STATEMENT OF SIGNIFICANCE: This paper demonstrates the great potential in intra-articular drug delivery of monodisperse biodegradable microspheres which were prepared using a new class of biodegradable multi-block copolymers and a unique membrane emulsification process allowing the preparation of microspheres with a narrow particle size distribution (monospheres) leading to multiple advantages like better injectability, enhanced reproducibility and predictability of the in vivo release kinetics. We report not only on the synthesis and preparation, but also in vitro characterization, followed by in vivo testing of intra-articular biocompatibility of the monospheres in both a small and a large animal model. The favourable intra-articular biocompatibility combined with the prolonged intra-articular retention (>90days) makes these monospheres an interesting drug delivery platform. What should also be highlighted is the use of horses; a very accurate translational model for the human situation, making the results not only relevant for equine healthcare, but also for the development of novel human OA therapies.

Long-term effect of stents eluting 6-mercaptopurine in porcine coronary arteries.

BACKGROUND: Drug-eluting stents (DES) have dramatically reduced restenosis rates compared to bare metal stents and are widely used in coronary artery angioplasty. The anti-proliferative nature of the drugs reduces smooth muscle cell (SMC) proliferation effectively, but unfortunately also negatively affects endothelialization of stent struts, necessitating prolonged dual anti-platelet therapy. Cell-type specific therapy may prevent this complication, giving rise to safer stents that do not require additional medication. 6-Mercaptopurine (6-MP) is a drug with demonstrated cell-type specific effects on vascular cells both in vitro and in vivo, inhibiting proliferation of SMCs while promoting survival of endothelial cells. In rabbits, we demonstrated that DES locally releasing 6-MP during 4 weeks reduced in-stent stenosis by inhibiting SMC proliferation and reducing inflammation, without negatively affecting endothelialization of the stent surface. The aim of the present study was to investigate whether 6-MP-eluting stents are similarly effective in preventing stenosis in porcine coronary arteries after 3 months, in order to assess the eligibility for human application. METHODS: 6-MP-eluting and polymer-only control stents (both n = 7) were implanted in porcine coronary arteries after local balloon injury to assess the effect of 6-MP on vascular lesion formation. Three months after implantation, stented coronary arteries were harvested and analyzed. RESULTS: Morphometric analyses revealed that stents were implanted reproducibly and with limited injury to the vessel wall. Unexpectedly, both in-stent stenosis (6-MP: 41.1 ± 10.3 %; control: 29.6 ± 5.9 %) and inflammation (6-MP: 2.14 ± 0.51; control: 1.43 ± 0.45) were similar between the groups after 3 months. CONCLUSION: In conclusion, although 6-MP was previously found to potently inhibit SMC proliferation, reduce inflammation and promote endothelial cell survival, thereby effectively reducing in-stent restenosis in rabbits, stents containing 300 µg 6-MP did not reduce stenosis and inflammation in porcine coronary arteries.

Stents Eluting 6-Mercaptopurine Reduce Neointima Formation and Inflammation while Enhancing Strut Coverage in Rabbits.

BACKGROUND: The introduction of drug-eluting stents (DES) has dramatically reduced restenosis rates compared with bare metal stents, but in-stent thrombosis remains a safety concern, necessitating prolonged dual anti-platelet therapy. The drug 6-Mercaptopurine (6-MP) has been shown to have beneficial effects in a cell-specific fashion on smooth muscle cells (SMC), endothelial cells and macrophages. We generated and analyzed a novel bioresorbable polymer coated DES, releasing 6-MP into the vessel wall, to reduce restenosis by inhibiting SMC proliferation and decreasing inflammation, without negatively affecting endothelialization of the stent surface. METHODS: Stents spray-coated with a bioresorbable polymer containing 0, 30 or 300 µg 6-MP were implanted in the iliac arteries of 17 male New Zealand White rabbits. Animals were euthanized for stent harvest 1 week after implantation for evaluation of cellular stent coverage and after 4 weeks for morphometric analyses of the lesions. RESULTS: Four weeks after implantation, the high dose of 6-MP attenuated restenosis with 16% compared to controls. Reduced neointima formation could at least partly be explained by an almost 2-fold induction of the cell cycle inhibiting kinase p27Kip1. Additionally, inflammation score, the quantification of RAM11-positive cells in the vessel wall, was significantly reduced in the high dose group with 23% compared to the control group. Evaluation with scanning electron microscopy showed 6-MP did not inhibit strut coverage 1 week after implantation. CONCLUSION: We demonstrate that novel stents coated with a bioresorbable polymer coating eluting 6-MP inhibit restenosis and attenuate inflammation, while stimulating endothelial coverage. The 6-MP-eluting stents demonstrate that inhibition of restenosis without leaving uncovered metal is feasible, bringing stents without risk of late thrombosis one step closer to the patient.

Microsphere-Based Rapamycin Delivery, Systemic Versus Local Administration in a Rat Model of Renal Ischemia/Reperfusion Injury.

PURPOSE: The increasing prevalence and treatment costs of kidney diseases call for innovative therapeutic strategies that prevent disease progression at an early stage. We studied a novel method of subcapsular injection of monodisperse microspheres, to use as a local delivery system of drugs to the kidney. METHODS: We generated placebo- and rapamycin monodisperse microspheres to investigate subcapsular delivery of drugs. Using a rat model of acute kidney injury, subcapsular injection of placebo and rapamycin monodisperse microspheres (monospheres) was compared to subcutaneous injection, mimicking systemic administration. RESULTS: We did not find any adverse effects related to the delivery method. Irrespective of the injection site, a similar low dose of rapamycin was present in the circulation. However, only local intrarenal delivery of rapamycin from monospheres led to decreased macrophage infiltration and a significantly lower amount of myofibroblasts in the kidney, where systemic administration did not. Local delivery of rapamycin did cause a transient increase in the deposition of collagen I, but not of collagen III. CONCLUSIONS: We conclude that therapeutic effects can be increased when rapamycin is delivered subcapsularly by monospheres, which, combined with low systemic concentrations, may lead to an effective intrarenal delivery method.

Protein release from water-swellable poly(D,L-lactide-PEG)-b-poly(ϵ-caprolactone) implants.

In this study, water-swellable multiblock copolymers composed of semi-crystalline poly(ϵ-caprolactone) [PCL] blocks and amorphous blocks consisting of poly(D,L-lactide) (PDLLA) and poly(ethylene glycol) (PEG) [PDLLA-PEG] were synthesized. The block ratio of these [PDLLA-PEG]-b-[PCL] multiblock copolymers was varied and the degradation of implants prepared of these polymers by hot melt extrusion (HME) was compared with implants prepared of [PCL-PEG]-b-[PCL], a copolymer which has been described previously (Stankovic et al., 2014). It was shown that the initial degradation rate of the [PDLLA-PEG]-b-[PCL] multiblock copolymers increased with increasing the content of amorphous [PDLLA-PEG] block and that the degradation rate of these multiblock copolymers was faster than that of the [PCL-PEG]-b-[PCL] multiblock copolymers due to rapid degradation of the [PDLLA-PEG] block. Furthermore, the release of the model proteins lysozyme and bovine serum albumin from polymer implants prepared by HME was studied. It was found that the protein release from [PDLLA-PEG]-b-[PCL] copolymers was incomplete, which is not acceptable for any application of these polymers. Besides, [PCL-PEG]-b-[PCL] copolymers showed slow and continuous release. We hypothesize that the incomplete release is explained by an irreversible interaction between the proteins and polymer degradation products or by entrapment of the protein in the hydrophobic and non-swellable polymer matrix that was left after degradation and loss of the hydrophilic [PDLLA-PEG] blocks from the degrading polymer.

Local therapeutic efficacy with reduced systemic side effects by rapamycin-loaded subcapsular microspheres.

Kidney injury triggers fibrosis, the final common pathway of chronic kidney disease (CKD). The increase of CKD prevalence worldwide urgently calls for new therapies. Available systemic treatment such as rapamycin are associated with serious side effects. To study the potential of local antifibrotic therapy, we administered rapamycin-loaded microspheres under the kidney capsule of ureter-obstructed rats and assessed the local antifibrotic effects and systemic side effects of rapamycin. After 7 days, microsphere depots were easily identifiable under the kidney capsule. Both systemic and local rapamycin treatment reduced intrarenal mTOR activity, myofibroblast accumulation, expression of fibrotic genes, and T-lymphocyte infiltration. Upon local treatment, inhibition of mTOR activity and reduction of myofibroblast accumulation were limited to the immediate vicinity of the subcapsular pocket, while reduction of T-cell infiltration was widespread. In contrast to systemically administered rapamycin, local treatment did not induce off target effects such as weight loss. Thus subcapsular delivery of rapamycin-loaded microspheres successfully inhibited local fibrotic response in UUO with less systemic effects. Therapeutic effect of released rapamycin was most prominent in close vicinity to the implanted microspheres.

Tailored protein release from biodegradable poly(ε-caprolactone-PEG)-b-poly(ε-caprolactone) multiblock-copolymer implants.

In this study, the in vitro release of proteins from novel, biodegradable phase-separated poly(ε-caprolactone-PEG)-block-poly(ε-caprolactone), [PCL-PEG]-b-[PCL]) multiblock copolymers with different block ratios and with a low melting temperature (49-55°C) was studied. The effect of block ratio and PEG content of the polymers (i.e. 22.5, 37.5 and 52.5 wt%) as well as the effect of protein molecular weight (1.2, 5.8, 14, 29 and 66 kDa being goserelin, insulin, lysozyme, carbonic anhydrase and albumin, respectively) on protein release was investigated. Proteins were spray-dried with inulin as stabilizer to obtain a powder of uniform particle size. Spray-dried inulin-stabilized proteins were incorporated into polymeric implants by hot melt extrusion. All incorporated proteins fully preserved their structural integrity as determined after extraction of these proteins from the polymeric implants. In general, it was found that the release rate of the protein increased with decreasing molecular weight of the protein and with increasing the PEG content of the polymer. Swelling and degradation rate of the copolymer increased with increasing PEG content. Hence, release of proteins of various molecular weights from [PCL-PEG]-b-[PCL] multi-block copolymers can be tailored by varying the PEG content of the polymer.

Low temperature extruded implants based on novel hydrophilic multiblock copolymer for long-term protein delivery.

Parenteral protein delivery requires preservation of the integrity of proteins and control over the release kinetics. In order to preserve the integrity, parenteral protein delivery formulations typically need to be processed at low temperatures. Therefore, we synthesized a novel low melting biodegradable hydrophilic multiblock copolymer composed of poly (ethylene glycol) and poly (ε-caprolactone) to allow extrusion at relatively low temperatures. We investigated the extrusion characteristics of this polymer and explored a strategy how to control the release of the model protein lysozyme from small diameter extruded implants. It was found that the polymer could be well extruded at temperatures as low as 55 °C. Moreover, lysozyme remained active both during extrusion as well as during release. Lysozyme release kinetics could be tailored by the co-incorporation of an oligosaccharide, inulin, which functions as a pore-forming excipient. It was concluded that this hydrophilic multiblock copolymer has promising characteristics for the preparation by melt extrusion of protein delivery implants with a release profile that is sustained over a period of more than 7 months.

In vitro and in vivo characterization of novel biodegradable polymers for application as drug-eluting stent coatings.

We have used a series of in vitro and in vivo tests to assess the suitability of two new degradable polymers for application as coatings for drug-eluting stents. The first is a family of urethane-linked multi-block copolymers (MBCP) that comprise blocks of lactide, glycolide, epsilon-caprolactone and/or poly(ethylene glycol) chain-extended with 1,4-butanediisocyanate (SynBiosys polymers). The second is a family of maltodextrin (MD) modified with fatty acid sidechains to yield a hydrophobic polymer (Eureka() SOLO polymers). We coated stainless-steel stents with two representative urethane-linked MBCPs and one hydrophobic MD polymer alone or in combination with the anti-restenotic drug sirolimus. Urethane-linked MBCPs formed uniform coatings on the stent substrates, withstood crimping and expansion on balloon catheters, completely released sirolimus from the coating within 30 days, and degraded within 30-60 days in PBS. The hydrophobic MD polymer formed uniform coatings, exhibited somewhat slower release of sirolimus (approx. 85% within 30 days), degraded within 60 days in PBS when sirolimus was incorporated in the coating, but showed very slow degradation in the absence of drug. We implanted stents coated with urethane-linked MBCPs or hydrophobic MD polymers in a porcine coronary artery model and used histological analysis at 28- and 90-day end-points to assess the biological response to the materials. Measures of stenosis and inflammation for urethane-linked MBCP and hydrophobic MD polymer coatings were not statistically different from bare metal controls at 28 and 90 days, suggesting that the polymers show good vascular biocompatibility. Endothelialization was nearly complete at 28 days and complete at 90 days for all formulations. Urethane-linked MBCP polymer-only and drug-eluting coatings and hydrophobic MD drug-eluting coatings were nearly completely degraded within 90 days in vivo whereas roughly half of hydrophobic MD polymer-only coatings remained after 90 days. Taken together, our in vitro and in vivo results suggest that SynBiosys urethane-linked MBCP and Eureka SOLO hydrophobic MD polymer families possess the physical and chemical properties and vascular biocompatibility necessary for further investigation for use in the next generation of drug-eluting stents.

In vitro degradation and biocompatibility of poly(DL-lactide-epsilon-caprolactone) nerve guides.

Bridging nerve gaps by means of autologous nerve grafts involves donor nerve graft harvesting. Recent studies have focused on the use of alternative methods, and one of these is the use of biodegradable nerve guides. After serving their function, nerve guides should degrade to avoid a chronic foreign body reaction. The in vitro degradation, in vitro cytotoxicity, hemocompatibility, and short-term in vivo foreign body reaction of poly((65)/(35) ((85)/(15) (L)/(D)) lactide-epsilon-caprolactone) nerve guides was studied. The in vitro degradation characteristics of poly(DLLA-epsilon-CL) nerve guides were monitored at 2-week time intervals during a period of 22 weeks. Weight loss, degree of swelling of the tube wall, mechanical strength, thermal properties, and the intrinsic viscosity of the nerve guides were determined. Cytotoxicity was studied by measuring the cell proliferation inhibition index (CPII) on mouse fibroblasts in vitro. Cell growth was evaluated by cell counting, while morphology was assessed by light microscopy. Hemocompatibility was evaluated using a thrombin generation assay and a complement convertase assay. The foreign body reaction against poly(DLLA-epsilon-CL) nerve guides was investigated by examining toluidine blue stained sections. The in vitro degradation data showed that poly(DLLA-epsilon-CL) nerve guides do not swell, maintain their mechanical strength and flexibility for a period of about 8-10 weeks, and start to lose mass after about 10 weeks. Poly(DLLA-epsilon-CL) nerve guides were classified as noncytotoxic, as cytotoxicity tests demonstrated that cell morphology was not affected (CPII 0%). The thrombin generation assay and complement convertase assay indicated that the material is highly hemocompatible. The foreign body reaction against the biomaterial was mild with a light priming of the immunesystem. The results presented in this study demonstrate that poly((65)/(35) ((85)/(15) (L)/(D)) lactide-epsilon-caprolactone) nerve guides are biocompatible, and show good in vitro degradation characteristics, making these biodegradable nerve guides promising candidates for bridging peripheral nerve defects up to several centimeters.