Unlocking the Fluorine-Free Buoy Effect: Surface-Enriched Ruthenium Polypyridine Complexes in Ionic Liquids.

Controlling the local concentration of metal complexes at the surface of ionic liquids (ILs) is a highly sought-after objective due to its pivotal implications in supported ionic liquid phase (SILP) catalysis. Equally important is to avoid per- and polyfluorinated substances due to environmental concerns. Herein, we investigate the surface enrichment of Ru polypyridyl complexes with fluorine-free alkylic side groups of varying lengths and shapes, using the hydrophilic IL [C2C1Im][OAc] as solvent. Additional charged carboxylate groups are included into the polypyridyl ligands to increase the solubility of the complex in the IL. When the ligand system is functionalized with long and hydrophobic alkyl side chains, the complex predominantly localizes at the IL/vacuum interface, as deduced from angle-resolved X-ray photoelectron spectroscopy. Conversely, in the presence of short or more bulky substituents, no surface enrichment is observed. This buoy-like behaviour with fluorine-free side groups is explored for 0.05 %mol to 1 %mol solutions. Intriguingly, surface saturation occurs at approximately 0.5 %mol, which is beneficial to the efficient operation of catalytic systems featuring high surface areas, such as SILP catalysts.

Surface Chemistry of a [C2C1Im][OTf] (Sub)Wetting Layer on Pt(111): A Combined XPS, IRAS, and STM Study.

The concept of a solid catalyst with an ionic liquid layer (SCILL) is a promising approach to improve the selectivity of noble metal catalysts in heterogeneous reactions. In order to understand the origins of this selectivity control, we investigated the growth and thermal stability of ultrathin 1-ethyl-3-methylimidazolium trifluormethanesulfonate [C2C1Im][OTf] films on Pt(111) by infrared reflection absorption spectroscopy (IRAS) and X-ray photoelectron spectroscopy (XPS) in time-resolved and temperature-programmed experiments. We combined these spectroscopy experiments with scanning tunneling microscopy (STM) to obtain detailed insights into the orientation and adsorption geometry of the ions in the first IL layer. Furthermore, we propose a mechanism for the thermal evolution of [C2C1Im][OTf] on Pt(111). We observe an intact IL layer on the surface at temperatures below 200 K. Adsorbed [C2C1Im][OTf] forms islands, which are evenly distributed over the surface. The [OTf]- anion adsorbs via the SO3 group, with the molecular axis perpendicular to the surface. Anions and cations are arranged next to each other, alternating on the Pt(111) surface. Upon heating to 250 K, we observe changes in geometry and structural distribution. Whereas at low temperature, the ions are arranged alternately for electrostatic reasons, this driving force is no longer decisive at 250 K. Here, a phase separation of two different species is discernible in STM. We propose that this effect is due to a surface reaction, which changes the charge of the adsorbates. We assume that the IL starts to decompose at around 250 K, and thus, pristine IL and decomposition products coexist on the surface. Also, IRAS and XPS show indication of IL decomposition. Further heating leads to increased IL decomposition. The reaction products associated with the anions are volatile and leave the surface. In contrast, the cation fragments remain on the surface up to temperatures above 420 K.

h-BN in the making: The surface chemistry of borazine on Rh(111).

Borazine is a well-established precursor molecule for the growth of hexagonal boron nitride (h-BN) via chemical vapor deposition on metal substrates. To understand the formation of the h-BN/Rh(111) moiré from borazine on a molecular level, we investigated the low-temperature adsorption and thermally induced on-surface reaction of borazine on Rh(111) in situ using synchrotron radiation-based high-resolution x-ray photoelectron spectroscopy (XPS), temperature-programmed XPS, and near-edge x-ray absorption fine structure measurements. We find that borazine adsorbs mainly as an intact molecule and have identified a flat-lying adsorption geometry. Borazine multilayers are observed to desorb below 200 K. Starting at about 300 K, dehydrogenation of the remaining borazine and borazine fragments takes place, and disordered boron nitride starts to grow. Above 600 K, the formation of the h-BN sets in. Finally, at 1100 K, the conversion to h-BN is complete. The h-BN formed by deposition and post-annealing was compared to the h-BN grown by an established procedure, proving the successful preparation of the desired two-dimensional material.

Exploring the interfacial behavior of ruthenium complexes in ionic liquids: implications for supported ionic liquid phase catalysts.

The interaction of metal complexes with ionic liquids, with a particular focus on the stability and surface concentration of the metal centers, is crucial in applications involving catalysts based on supported ionic liquids. In this study, we synthesized the complexes [Ru(tpy)(bpy)Cl][PF6] and [Ru(tpy)(dcb)Cl][PF6] (tpy = 2,2',2''-terpyridine, bpy = 2,2'-bipyridine, dcb = 4,4'-dicarboxy-2,2'-bipyridine) and we prepared solutions using the ionic liquids (ILs) 1-ethyl-3-methylimidazolium acetate [C2C1Im][OAc] and 1-butyl-3-methylimidazolium hexafluorophosphate [C4C1Im][PF6]. The chemical environment of the Ru(II) metal center and the interfacial behavior of the complexes in the different IL solutions were determined using angle-resolved X-ray photoelectron spectroscopy (ARXPS). In [C4C1Im][PF6], [Ru(tpy)(bpy)Cl][PF6] maintains its chemical structure, while in [C2C1Im][OAc], partial changes in the chemical environment of the Ru center are indicated by XPS, likely due to ligand exchange. The presence of carboxylic acid functional groups in the bipyridyl ligand seems to inhibit this ligand exchange. The investigated complexes do not exhibit surface activity but are depleted from the IL/gas interface. These findings hold significance for the design of new supported ionic liquid phase catalysts based on Ru complexes.

The Norbornadiene/Quadricyclane Pair as Molecular Solar Thermal Energy Storage System: Surface Science Investigations.

For the transition to renewable energy sources, novel energy storage materials are more important than ever. This review addresses so-called molecular solar thermal (MOST) systems, which appear very promising since they combine light harvesting and energy storing in one-photon one-molecule processes. The focus is on norbornadiene (NBD), a particularly interesting candidate, which is converted to the strained valence isomer quadricyclane (QC) upon irradiation. The stored energy can be released on demand. The energy-releasing cycloreversion from QC to NBD can be initiated by a thermal, catalytic, or electrochemical trigger. The reversibility of the energy storage and release cycles determines the general practicality of a MOST system. In the search for derivatives, which enable large-scale applications, fundamental surface science studies help to assess the feasibility of potential substituted NBD/QC couples. We include investigations under well-defined ultra-high vacuum (UHV) conditions as well as experiments in liquid phase. Next to the influence of the catalytically active surfaces on the isomerization between the two valence isomers, information on adsorption geometries, thermal stability limits, and reaction pathways of the respective molecules are discussed. Moreover, laboratory-scaled test devices demonstrate the proof of concept in various areas of application.

Bromination of 2D materials.

The adsorption, reaction and thermal stability of bromine on Rh(111)-supported hexagonal boron nitride (h-BN) and graphene were investigated. Synchrotron radiation-based high-resolution x-ray photoelectron spectroscopy (XPS) and temperature-programmed XPS allowed us to follow the adsorption process and the thermal evolutionin situon the molecular scale. Onh-BN/Rh(111), bromine adsorbs exclusively in the pores of the nanomesh while we observe no such selectivity for graphene/Rh(111). Upon heating, bromine undergoes an on-surface reaction onh-BN to form polybromides (170-240 K), which subsequently decompose to bromide (240-640 K). The high thermal stability of Br/h-BN/Rh(111) suggests strong/covalent bonding. Bromine on graphene/Rh(111), on the other hand, reveals no distinct reactivity except for intercalation of small amounts of bromine underneath the 2D layer at high temperatures. In both cases, adsorption is reversible upon heating. Our experiments are supported by a comprehensive theoretical study. DFT calculations were used to describe the nature of theh-BN nanomesh and the graphene moiré in detail and to study the adsorption energetics and substrate interaction of bromine. In addition, the adsorption of bromine onh-BN/Rh(111) was simulated by molecular dynamics using a machine-learning force field.

A combined gas-phase dissociative ionization, dissociative electron attachment and deposition study on the potential FEBID precursor [Au(CH3)2Cl]2.

Motivated by the potential of focused-electron-beam-induced deposition (FEBID) in the fabrication of functional gold nanostructures for application in plasmonic and detector technology, we conducted a comprehensive study on [Au(CH3)2Cl]2 as a potential precursor for such depositions. Fundamental electron-induced dissociation processes were studied under single collision conditions, and the composition and morphology of FEBID deposits fabricated in an ultrahigh-vacuum (UHV) chamber were explored on different surfaces and at varied beam currents. In the gas phase, dissociative ionization was found to lead to significant carbon loss from this precursor, and about 50% of the chlorine was on average removed per dissociative ionization incident. On the other hand, in dissociative electron attachment, no chlorine was removed from the parent molecule. Contrary to these observations, FEBID in the UHV setup was found to yield a quantitative loss and desorption of the chlorine from the deposits, an effect that we attribute to electron-induced secondary and tertiary reactions in the deposition process. We find this precursor to be stable at ambient conditions and to have sufficient vapor pressure to be suitable for use in HV instruments. More importantly, in the UHV setup, FEBID with [Au(CH3)2Cl]2 yielded deposits with high gold content, ranging from 45 to 61 atom % depending on the beam current and on the cleanliness of the substrates surface.

Understanding the Buoy Effect of Surface-Enriched Pt Complexes in Ionic Liquids: A Combined ARXPS and Pendant Drop Study.

Recently, we demonstrated that Pt catalyst complexes dissolved in the ionic liquid (IL) [C4 C1 Im][PF6 ] can be deliberately enriched at the IL surface by introducing perfluorinated substituents, which act like buoys dragging the metal complex towards the surface. Herein, we extend our previous angle-resolved X-ray photoelectron spectroscopy (ARXPS) studies at complex concentrations between 30 and 5 %mol down to 1 %mol and present complementary surface tension pendant drop (PD) measurements under ultraclean vacuum conditions. This combination allows for connecting the microscopic information on the IL/gas interface derived from ARXPS with the macroscopic property surface tension. The surface enrichment of the Pt complexes is found to be most pronounced at 1 %mol . It also displays a strong temperature dependence, which was not observed for 5 %mol and above, where the surface is already saturated with the complex. The surface enrichment deduced from ARXPS is also reflected by the pronounced decrease in surface tension with increasing concentration of the catalyst. We furthermore observe by ARXPS and PD a much stronger surface affinity of the buoy-complex as compared to the free ligands in solution. Our results are highly interesting for an optimum design of IL-based catalyst systems with large contact areas to the surrounding reactant/product phase, such as in supported IL phase (SILP) catalysis.

Structure and Conformation of Individual Molecules upon Adsorption of a Mixture of Benzoporphyrins on Ag(111), Cu(111), and Cu(110) Surfaces.

The front cover artwork is provided by the groups of Prof. Dr. Hans-Peter Steinrück and Prof. Dr. Norbert Jux at the Friedrich-Alexander-Universität (FAU) Erlangen-Nürnberg. The image shows a mixture of six 2H-tetrakis-(3, 5-di-tert-butyl-phenyl)(x)benzoporphyrins (2H-diTTBP(x)BPs, x = 0, 1, 2-cis, 2-trans, 3, or 4) molecules forming a porous square structure on Ag(111) as observed in scanning tunneling microscopy (STM) at room temperature. Read the full text of the Research Article at 10.1002/cphc.202300355.

Adsorption and thermal evolution of [C1C1Im][Tf2N] on Pt(111).

In the context of ionic liquid (IL)-assisted catalysis, we have investigated the adsorption and thermal evolution of the IL 1,3-dimethylimidazolium bis(trifluoromethylsulfonyl)imide ([C1C1Im][Tf2N]) on Pt(111) between 100 and 800 K by angle-resolved X-ray photoelectron spectroscopy and scanning tunneling microscopy. Defined amounts of IL in the coverage range of a complete first wetting layer were deposited at low temperature (100-200 K), and subsequently heated to 300 K, or directly at 300 K. At 100 K, the IL adsorbs as an intact disordered layer. Upon heating to 200 K, the IL stays intact, but forms an ordered and well-oriented structure. Upon heating to 250 K, the surface order increases, but at the same time STM and XPS indicate the onset of decomposition. Upon heating to 300 K, decomposition progresses, such that 50-60% of the IL is decomposed. The anion-related reaction products desorb instantaneously, and the cation-related products remain on the surface. Thereby, the surface is partly passivated, enabling the remaining IL to still be adsorbed intact at 300 K. For IL deposition directly at 300 K, a fraction of the IL instantaneously decomposes, with the anion-related products desorbing, opening free space for further deposition of IL. Hence, cation-related species accumulate at the expense of anions, until one fully closed wetting layer is formed. As a consequence, a higher dose is required to reach this coverage at 300 K, compared to 100-200 K.

Poly(benzimidazobenzophenanthroline)-Ladder-Type Two-Dimensional Conjugated Covalent Organic Framework for Fast Proton Storage.

Electrochemical proton storage plays an essential role in designing next-generation high-rate energy storage devices, e.g., aqueous batteries. Two-dimensional conjugated covalent organic frameworks (2D c-COFs) are promising electrode materials, but their competitive proton and metal-ion insertion mechanisms remain elusive, and proton storage in COFs is rarely explored. Here, we report a perinone-based poly(benzimidazobenzophenanthroline) (BBL)-ladder-type 2D c-COF for fast proton storage in both a mild aqueous Zn-ion electrolyte and strong acid. We unveil that the discharged C-O- groups exhibit largely reduced basicity due to the considerable π-delocalization in perinone, thus affording the 2D c-COF a unique affinity for protons with fast kinetics. As a consequence, the 2D c-COF electrode presents an outstanding rate capability of up to 200 A g-1 (over 2500 C), surpassing the state-of-the-art conjugated polymers, COFs, and metal-organic frameworks. Our work reports the first example of pure proton storage among COFs and highlights the great potential of BBL-ladder-type 2D conjugated polymers in future energy devices.

Surface science and liquid phase investigations of oxanorbornadiene/oxaquadricyclane ester derivatives as molecular solar thermal energy storage systems on Pt(111).

The transition to renewable energy sources comes along with the search for new energy storage solutions. Molecular solar thermal systems directly harvest and store solar energy in a chemical manner. By a suitable molecular design, a higher overall efficiency can be achieved. In this study, we investigate the surface chemistry of oxa-norbornadiene/quadricyclane derivatives on a Pt(111) surface. Specifically, we focus on the energy storage and release properties of molecules that are substituted with ester moieties of different sizes. For our model catalytic approach, synchrotron radiation-based x-ray photoelectron spectroscopy measurements were conducted in ultra-high vacuum (UHV) and correlated with the catalytic behavior in the liquid phase monitored by photochemical infrared reflection absorption spectroscopy. The differences in their spectral appearance enabled us to unambiguously differentiate the energy-lean and energy-rich isomers and decomposition products. Next to qualitative information on the adsorption motifs, temperature-programmed experiments allowed for the observation of thermally induced reactions and the deduction of the related reaction pathways. We analyzed the selectivity of the cycloreversion reaction from the energy-rich quadricyclane derivative to its energy-lean norbornadiene isomer and competing processes, such as desorption and decomposition. For the 2,3-bis(methylester)-substitution, the cycloreversion reaction was found to occur between 310 and 340 K, while the thermal stability limit of the compounds was determined to be 380 K. The larger 2,3-bis(benzylester) derivatives have a lower apparent adsorption energy and a decomposition onset already at 135 K. In the liquid phase (in acetonitrile), we determined the rate constants for the cycloreversion reaction on Pt(111) to k = 5.3 × 10-4 s-1 for the 2,3-bis(methylester)-substitution and k = 6.3 × 10-4 s-1 for the 2,3-bis(benzylester) derivative. The selectivities were of >99% and 98% for the two molecules, respectively. The difference in the catalytic behavior of Pt(111) for both derivatives is less pronounced in the liquid phase than in UHV, which we attribute to the passivation of the Pt(111) surface by carbonaceous species under ambient conditions.

Bromine Adsorption and Thermal Stability on Rh(111): A Combined XPS, LEED and DFT Study.

This study addresses a fundamental question in surface science: the adsorption of halogens on metal surfaces. Using synchrotron radiation-based high-resolution X-ray photoelectron spectroscopy (XPS), temperature-programmed XPS, low-energy electron diffraction (LEED) and density functional theory (DFT) calculations, we investigated the adsorption and thermal stability of bromine on Rh(111) in detail. The adsorption of elemental bromine on Rh(111) at 170 K was followed in situ by XPS in the Br 3d region, revealing two individual, coverage-dependent species, which we assign to fcc hollow- and bridge-bound atomic bromine. In addition, we find a significant shift in binding energy upon increasing coverage due to adsorbate-adsorbate interactions. Subsequent heating shows a high thermal stability of bromine on Rh(111) up to above 1000 K, indicating strong covalent bonding. To complement the XPS data, LEED was used to study the long-range order of bromine on Rh(111): we observe a (√3×√3)R30° structure for low coverages (≤0.33 ML) and a star-shaped compression structure for higher coverages (0.33-0.43 ML). Combining LEED and DFT calculations, we were able to visualize bromine adsorption on Rh(111) in real space for varying coverages.

Exceptionally high charge mobility in phthalocyanine-based poly(benzimidazobenzophenanthroline)-ladder-type two-dimensional conjugated polymers.

Two-dimensional conjugated polymers (2DCPs), composed of multiple strands of linear conjugated polymers with extended in-plane π-conjugation, are emerging crystalline semiconducting polymers for organic (opto)electronics. They are represented by two-dimensional π-conjugated covalent organic frameworks, which typically suffer from poor π-conjugation and thus low charge carrier mobilities. Here we overcome this limitation by demonstrating two semiconducting phthalocyanine-based poly(benzimidazobenzophenanthroline)-ladder-type 2DCPs (2DCP-MPc, with M = Cu or Ni), which are constructed from octaaminophthalocyaninato metal(II) and naphthalenetetracarboxylic dianhydride by polycondensation under solvothermal conditions. The 2DCP-MPcs exhibit optical bandgaps of ~1.3 eV with highly delocalized π-electrons. Density functional theory calculations unveil strongly dispersive energy bands with small electron-hole reduced effective masses of ~0.15m0 for the layer-stacked 2DCP-MPcs. Terahertz spectroscopy reveals the band transport of Drude-type free carriers in 2DCP-MPcs with exceptionally high sum mobility of electrons and holes of ~970 cm2 V-1 s-1 at room temperature, surpassing that of the reported linear conjugated polymers and 2DCPs. This work highlights the critical role of effective conjugation in enhancing the charge transport properties of 2DCPs and the great potential of high-mobility 2DCPs for future (opto)electronics.

Structure and Conformation of Individual Molecules upon Adsorption of a Mixture of Benzoporphyrins on Ag(111), Cu(111), and Cu(110) Surfaces.

We investigated the adsorption behavior of a mixture of six 2H-tetrakis-(3, 5-di-tert-butylphenyl)(x)benzoporphyrins (2H-diTTBP(x)BPs, x=0, 1, 2-cis, 2-trans, 3, and 4) on Ag(111), Cu(111) and Cu(110) at room temperature by scanning tunneling microscopy (STM) under ultra-high vacuum conditions. On Ag(111), we observe an ordered two-dimensional square phase, which is stable up to 400 K. On Cu(111), the same square phase coexists with a stripe phase, which disappears at 400 K. In contrast, on Cu(110), 2H-diTTBP(x)BPs adsorb as immobile isolated molecules or dispersed short chains along the [1 1 ‾ ${\bar{1}}$ 0] substrate direction, which remain intact up to 450 K. The stabilization of the 2D supramolecular structures on Ag(111) and Cu(111), and of the 1D short chains on Cu(110) is attributed to van der Waals interactions between the tert-butyl and phenyl groups of neighboring molecules. From high-resolution STM, we can assign all six 2H-diTTBP(x)BPs within the ordered structures. Moreover, we deduce a crown shape quadratic conformation on Ag(111) and Cu(111), an additional saddle-shape on Cu(111), and an inverted structure and a quadratic appearance on Cu(110). The different conformations are attributed to the different degree of interaction of the iminic nitrogen atoms of the isoindole and pyrrole groups with the substrate atoms.

Isolated Rh atoms in dehydrogenation catalysis.

Isolated active sites have great potential to be highly efficient and stable in heterogeneous catalysis, while enabling low costs due to the low transition metal content. Herein, we present results on the synthesis, first catalytic trials, and characterization of the Ga9Rh2 phase and the hitherto not-studied Ga3Rh phase. We used XRD and TEM for structural characterization, and with XPS, EDX we accessed the chemical composition and electronic structure of the intermetallic compounds. In combination with catalytic tests of these phases in the challenging propane dehydrogenation and by DFT calculations, we obtain a comprehensive picture of these novel catalyst materials. Their specific crystallographic structure leads to isolated Rhodium sites, which is proposed to be the decisive factor for the catalytic properties of the systems.

Surface Studies on the Energy Release of the MOST System 2-Carbethoxy-3-Phenyl-Norbornadiene/Quadricyclane (PENBD/PEQC) on Pt(111) and Ni(111).

Novel energy-storage solutions are necessary for the transition from fossil to renewable energy sources. Auspicious candidates are so-called molecular solar thermal (MOST) systems. In our study, we investigate the surface chemistry of a derivatized norbornadiene/quadricyclane molecule pair. By using suitable push-pull substituents, a bathochromic shift of the absorption onset is achieved, allowing a greater overlap with the solar spectrum. Specifically, the adsorption and thermally induced reactions of 2-carbethoxy-3-phenyl-norbornadiene/quadricyclane are assessed on Pt(111) and Ni(111) as model catalyst surfaces by synchrotron radiation-based X-ray photoelectron spectroscopy (XPS). Comparison of the respective XP spectra enables the distinction of the energy-rich molecule from its energy-lean counterpart and allows qualitative information on the adsorption motifs to be derived. Monitoring the quantitative cycloreversion between 140 and 230 K spectroscopically demonstrates the release of the stored energy to be successfully triggered on Pt(111). Heating to above 300 K leads to fragmentation of the molecular framework. On Ni(111), no conversion of the energy-rich compound takes place. The individual decomposition pathways of the two isomers begin at 160 and 180 K, respectively. Pronounced desorption of almost the entire surface coverage only occurs for the energy-lean molecule on Ni(111) above 280 K; this suggests weakly bound species. The correlation between adsorption motif and desorption behavior is important for applications of MOST systems in heterogeneously catalyzed processes.

Formation and Surface Behavior of Pt and Pd Complexes with Ligand Systems Derived from Nitrile-functionalized Ionic Liquids Studied by XPS.

The front cover artwork is provided by the groups of Prof. Hans-Peter Steinrück and Prof. Peter Wasserscheid at the Friedrich-Alexander-Universität (FAU) Erlangen-Nürnberg. The image shows substitution of volatile acetonitrile ligands by a nitrile-functionalized imidazolium cation. The formed cationic complex and the counter ions exhibit a specific preferential orientation at the ionic liquid/gas interface, which can be studied by angle-resolved XPS. Read the full text of the Research Article at 10.1002/cphc.202200391.

The Buoy Effect: Surface Enrichment of a Pt Complex in IL Solution by Ligand Design.

Invited for the cover of this issue are the groups of Hans-Peter Steinrück and Peter Wasserscheid at the Friedrich-Alexander-Universität Erlangen-Nürnberg. The image depicts two Pt catalysts dissolved in an ionic liquid. For one of them, fluorinated side chains in the ligand system act as buoys leading to pronounced enrichment of the complex at the gas/IL interface, as is evidenced by strongly enhanced Pt signals in angle-resolved photoelectron spectroscopy. For the complex without fluorinated side chains, no such effect is observed. Read the full text of the article at 10.1002/chem.202203325.