A review of wear debris in thumb base joint implants.

AIM: Polymers and metals, such as polyethylene (PE) and cobalt chrome (CoCr), are common materials used in thumb-based joint implants, also known as CMC (Carpometacarpal) arthroplasty. The purpose of this review was to investigate the reported failure modes related to wear debris from these type of materials in CMC implants. The impact of wear debris on clinical outcomes of CMC implants was also examined. Potential adverse wear conditions and inflammatory particle characteristics were also considered. METHOD: A literature search was performed using PRISMA guidelines and 55 studies were reviewed including 49 cohort studies and 6 case studies. Of the 55 studies, 38/55 (69%) focused on metal-on-polyethylene devices, followed by metal-on-metal (35%), and metal-on-bone (4%). RESULTS: The summarized data was used to determine the frequency of failure modes potentially related to wear debris from metals and/or polymers. The most commonly reported incidents potentially relating to debris were implant loosening (7.1%), osteolysis (1.2%) and metallosis (0.6%). Interestingly the reported mechanisms behind osteolysis and loosening greatly varied. Inflammatory reactions, while rare, were generally attributed to metallic debris from metal-on-metal devices. Mechanisms of adverse wear conditions included implant malpositioning, over-tensioning, high loading for active patients, third-body debris, and polyethylene wear-through. No specific examination of debris particle characterization was found, pointing to a gap in the literature. CONCLUSION: This review underscores the types of failure modes associated with wear debris in CMC implants. It was found that failure rates and adverse wear conditions of CMC implants of any design are low and the exact relationship between wear debris and implant incidences, such as osteolysis and loosening remains uncertain. The authors note that further research and specific characterization is required to understand the relationship between debris and implant failure.

Corrective Osteotomy in a Patient With Congenital Absence of Pronation Based on Three-Dimensional Statistical Shape Modeling.

We present a new indication of a three-dimensional statistical shape model (SSM): a patient with bilateral impaired forearm rotation due to a congenital variance in bone shape. A corrective osteotomy was planned and performed to best match the SSM created by computed tomography (CT) scans of 18 peers. Postoperatively, pronation increased by 70°, and the patient was pain-free. A CT scan showed accurate correction of the deformity and union of all osteotomies. This technique offers opportunities for patients with bilateral nontraumatic osseous forearm pathology.

Impact of bone and cartilage segmentation from CT and MRI on both bone forearm osteotomy planning.

INTRODUCTION: The use of MRI scans for pre-operative surgical planning of forearm osteotomies provides additional information of joint cartilage and soft tissue structures and reduces radiation exposure in comparison with the use of CT scans. In this study, we investigated whether using 3D information obtained from MRI with and without cartilage information leads to a different outcome of pre-operative planning. METHODS: Bilateral CT and MRI scans of the forearms of 10 adolescent and young adult patients with a unilateral bone deformation were acquired in a prospective study. The bones were segmented from CT and MRI, and cartilage only from MRI. The deformed bones were virtually reconstructed, by registering the joint ends to the healthy contralateral side. An optimal osteotomy plane was determined that minimized the distance between the resulting fragments. This process was performed in threefold: using the CT and MRI bone segmentations, and the MRI cartilage segmentations. RESULTS: Comparison of bone segmentation from MRI and CT scan resulted in a 0.95 ± 0.02 Dice Similarity Coefficient and 0.42 ± 0.07 mm Mean Absolute Surface Distance. All realignment parameters showed excellent reliability across the different segmentations. However, the mean differences in translational realignment between CT and MRI bone segmentations (4.5 ± 2.1 mm) and between MRI bone and MRI bone and cartilage segmentations (2.8 ± 2.1 mm) were shown to be clinically and statistically significant. A significant positive correlation was found between the translational realignment and the relative amount of cartilage. CONCLUSION: This study indicates that although bone realignment remained largely similar when using MRI with and without cartilage information compared to using CT, the small differences in segmentation could induce statistically and clinically significant differences in the osteotomy planning. We also showed that endochondral cartilage might be a non-negligible factor when planning osteotomies for young patients.

Reconstruction of the cervical ligament in patients with chronic subtalar instability.

PURPOSE: Diagnosis and treatment of subtalar instability (STI) remains complicated and challenging. The purpose of this study was to investigate the outcome of an anatomical reconstruction of the cervical ligament in patients with suspected chronic STI. METHODS: This prospective study assessed the results of a surgical reconstruction of the cervical ligament using a gracilis tendon graft in a group of 14 patients (16 feet). Diagnosis of STI was performed using a predefined algorithm including clinical signs, MRI and peroperative evaluation. All patients had symptoms of chronic hindfoot instability despite prolonged non-surgical treatment. At final follow-up the outcome was assessed using the Karlsson score, the Foot and Ankle Outcome Score and the American Orthopaedic Foot and Ankle Society score. RESULTS: After an average follow up of 22.6 months (range, 15-36), all patients reported significant improvement compared to their preoperative symptoms. The mean preoperative Karlsson score improved from 36.4 ± 13.5 (median 37, range 10-55) to a mean postoperative Karlsson score was 89.6 ± 8.5 (median 90, range 72-100) (P < 0.0001). The cervical ligament reconstruction was combined with other procedures in 13 cases: calcaneofibular ligament (CFL) reconstruction (3), CFL and anterior talofibular ligament reconstruction (7), bifurcate ligament reconstruction (3). CONCLUSION: Anatomical reconstruction of the cervical ligament is a valid technique to treat patients with STI. It is a safe procedure and produces good clinical results with minimal complications. This technique can be considered in more complex cases and can be combined with other procedures according to the specific location of the instability. LEVEL OF EVIDENCE: Level III.

The different subtalar ligaments show significant differences in their mechanical properties.

BACKGROUND: Today, the relative contribution of each ligamentous structure in the stability of the subtalar joint is still unclear. The purpose of this study is to assess the material properties of the different ligamentous structures of the subtalar joint. METHODS: Eighteen paired fresh-frozen cadaveric feet were used to obtain bone-ligament-bone complexes of the calcaneofibular ligament (CFL), the cervical ligament (CL) and the anterior capsular ligament-interosseous talocalcaneal ligament complex (ACaL-ITCL). The samples were subjected to uniaxial testing to calculate their respective stiffness and failure load. RESULTS: The stiffness of ACaL-ITCL complex (mean: 150 ± 51 N/mm, 95% confidence interval (CI): 125.0-176.6 N/mm) was significantly higher than both CFL (mean: 55.8 ± 23.0 N/mm, CI: 43.8-67.7 N/mm) and CL (mean: 63.9 ± 38.0 N/mm, CI: 44.4-83.3 N/mm). The failure load of both the ACaL-ITCL complex (mean:382.5 ± 158 N, CI: 304.1-460.8 N) and the CFL (mean:320.4 ± 122.0 N, CI: 257.5-383.2 N) were significantly higher than that of the CL (mean:163.5 ± 58.0 N, CI: 131.3-195.7 N). The injury pattern demonstrated a partial rupture in all CFL and ACaL-ITCL specimens and in 60% of the CL specimens. CONCLUSION: The CFL, CL and ACaL-ITCL show significant differences in their intrinsic mechanical properties. Both the CFL and CL are more compliant ligaments and seem to be involved in the development of subtalar instability. Based on the material properties, a gracilis tendon graft seems more appropriate than a synthetic ligament to reconstruct a CL or CFL. A partial rupture was the most commonly seen injury pattern in all ligaments. A fibular avulsion of the CFL was only rarely seen. The injury patterns need further investigation as they are important to optimize diagnosis and treatment.

Adaptive local thresholding can enhance the accuracy of HR-pQCT-based trabecular bone morphology assessment.

High-resolution peripheral quantitative computed tomography (HR-pQCT) devices can scan extremities at bone microstructural level in vivo and are used mainly in research of bone diseases. Two HR-pQCT scanners are commercially available to date: XtremeCT (first generation) and XtremeCT-II (second generation) from Scanco Medical AG (Switzerland). Recently, we have proposed an adaptive local thresholding (AT) technique and showed that it can improve quantification accuracy of bone microstructural parameters, with visually less sharp cone-beam CT (CBCT) images providing a similar accuracy than XtremeCT. The aim of this study was to evaluate whether the AT segmentation technique could enhance the accuracy of HR-pQCT in quantifying bone microstructural images and to assess whether the agreement between XtremeCT and XtremeCT-II could be improved. Nineteen radii were scanned with three scanners from Scanco Medical AG: (1) XtremeCT at 82 µm, (2) XtremeCT-II at 60.7 µm and (3) the small animal microCT scanner VivaCT40 at 19 µm voxel size. The scans were segmented applying two different methods, once following the manufacturer standard technique (ST), and once by means of AT. Three-dimensional (3D) morphological analysis was performed on the trabecular volume of the segmented images using the manufacturer's standard software to calculate bone volume fraction (BV/TV), trabecular thickness (Tb.Th), separation (Tb.Sp) and number (Tb.N). The average accuracy of XtremeCT improved from R2 = 0.76 (ST) to 0.85 (AT) and reached the same level of accuracy as XtremeCT-II with ST (R2 = 0.86). The largest improvements were obtained for BV/TV and Tb.Th. For XtremeCT-II, mean accuracy improved slightly from R2 = 0.86 (ST) to 0.89 (AT). For both segmentations and both scanners, the standard section was quantified slightly more accurate than the subchondral section. The agreement between the scanners was enhanced from R2 = 0.89 (ST) to 0.98 (AT). In conclusion, AT can enhance the accuracy of XtremeCT to quantify distal radius bone microstructural parameters close to XtremeCT-II level and increases the agreement between the two HR-pQCT scanners. High-resolution peripheral quantitative computed tomography, segmentation, bone microstructural parameters.

Outcomes of 3-D corrective osteotomies for paediatric malunited both-bone forearm fractures.

Closed treatment of paediatric diaphyseal forearm fractures carries the risk of re-displacement, which can lead to symptomatic malunions. This is because growth will not correct angulation deformity as it does in metaphyseal fractures. The purpose of this prospective cohort study was to evaluate the outcomes after 3-D-planned corrective osteotomy with patient-specific surgical guides for paediatric malunited forearm fractures causing impaired pro-supination. Our primary outcome measure was the gain in pro-supination at 12 months follow-up. Fifteen patients with a mean age at trauma of 9.6 years and time until osteotomy of 5.9 years were included. Preoperatively, patients displayed a mean pro-supination of 67° corresponding to 44% of the contralateral forearm. At final follow-up, this improved to 128°, achieving 85% of the contralateral side. Multivariate linear regression analysis revealed that predictors of greater functional gain after 3-D corrective osteotomy are severe preoperative impairment in pro-supination, shorter interval until 3-D corrective osteotomy and greater angulation of the radius.Level of evidence: III.

The presence of persistent symptoms 12 months following a first lateral ankle sprain: A systematic review and meta-analysis.

BACKGROUND: A lateral ankle sprain (LAS) is the most common musculoskeletal injury in the physically active population. It is uncertain what percentage of these patients develop persisting symptoms including pain, recurrent sprains and subjective instability. This systematic review was conducted to assess the presence and duration of persistent symptoms after a first LAS. METHODS: A systematic review of the Medline, Web of Sciences, Embase, CINAHL and Pedro databases was performed to identify peer-reviewed articles concerning the occurrence and duration of remaining symptoms after a first LAS. Inclusion criteria focused on selection of patients without previous ankle injuries and study quality. One of the following outcomes had to be described: subjective instability, resprains, remaining symptoms. RESULTS: In total, 15 studies were included. The occurrence of patients with subjective instability decreased from 37.9% (95%CI [6.0-69.7]) at 3 months to 16.1% (95%CI [7.8-24.3]) at 6 months and 8.1% (95%CI [3.3-13.3]) at 12 months. The occurrence of patients with a recurrent LAS was 15.8% (95%CI [6.3-25.3]) at 12 months. The occurrence of patients with residual pain decreased from 48.6% (95%CI [23.6-73.5]) at 3 months, to 21.5% (95%CI [2.8-40.2]) at 6 months and 6.7% (95%CI [3.2-10.1]) at 12 months. CONCLUSION: This study offers new insights in the presence of remaining symptoms after a first LAS and the development of chronic ankle instability. Twelve months following an initial LAS, a significant number of patients may still have symptoms. The incidence of subjective instability, and pain, continues to decrease until 12 months post-injury. This new information may suggest that a longer period of non-operative treatment may be warranted before recommending surgical intervention in patients with a first LAS.

Accuracy of 3D Corrective Osteotomy for Pediatric Malunited Both-Bone Forearm Fractures.

Re-displacement of a pediatric diaphyseal forearm fracture can lead to a malunion with symptomatic impairment in forearm rotation, which may require a corrective osteotomy. Corrective osteotomy with two-dimensional (2D) radiographic planning for malunited pediatric forearm fractures can be a complex procedure due to multiplanar deformities. Three-dimensional (3D) corrective osteotomy can aid the surgeon in planning and obtaining a more accurate correction and better forearm rotation. This prospective study aimed to assess the accuracy of correction after 3D corrective osteotomy for pediatric forearm malunion and if anatomic correction influences the functional outcome. Our primary outcome measures were the residual maximum deformity angle (MDA) and malrotation after 3D corrective osteotomy. Post-operative MDA > 5° or residual malrotation > 15° were defined as non-anatomic corrections. Our secondary outcome measure was the gain in pro-supination. Between 2016−2018, fifteen patients underwent 3D corrective osteotomies for pediatric malunited diaphyseal both-bone fractures. Three-dimensional corrective osteotomies provided anatomic correction in 10 out of 15 patients. Anatomic corrections resulted in a greater gain in pro-supination than non-anatomic corrections: 70° versus 46° (p = 0.04, ANOVA). Residual malrotation of the radius was associated with inferior gain in pro-supination (p = 0.03, multi-variate linear regression). Three-dimensional corrective osteotomy for pediatric forearm malunion reliably provided an accurate correction, which led to a close-to-normal forearm rotation. Non-anatomic correction, especially residual malrotation of the radius, leads to inferior functional outcomes.

High-Resolution Cone-Beam Computed Tomography is a Fast and Promising Technique to Quantify Bone Microstructure and Mechanics of the Distal Radius.

Obtaining high-resolution scans of bones and joints for clinical applications is challenging. HR-pQCT is considered the best technology to acquire high-resolution images of the peripheral skeleton in vivo, but a breakthrough for widespread clinical applications is still lacking. Recently, we showed on trapezia that CBCT is a promising alternative providing a larger FOV at a shorter scanning time. The goals of this study were to evaluate the accuracy of CBCT in quantifying trabecular bone microstructural and predicted mechanical parameters of the distal radius, the most often investigated skeletal site with HR-pQCT, and to compare it with HR-pQCT. Nineteen radii were scanned with four scanners: (1) HR-pQCT (XtremeCT, Scanco Medical AG, @ (voxel size) 82 µm), (2) HR-pQCT (XtremeCT-II, Scanco, @60.7 µm), (3) CBCT (NewTom 5G, Cefla, @75 µm) reconstructed and segmented using in-house developed software and (4) microCT (VivaCT40, Scanco, @19 µm-gold standard). The following parameters were evaluated: predicted stiffness, strength, bone volume fraction (BV/TV) and trabecular thickness (Tb.Th), separation (Tb.Sp) and number (Tb.N). The overall accuracy of CBCT with in-house optimized algorithms in quantifying bone microstructural parameters was comparable (R2 = 0.79) to XtremeCT (R2 = 0.76) and slightly worse than XtremeCT-II (R2 = 0.86) which were both processed with the standard manufacturer's technique. CBCT had higher accuracy for BV/TV and Tb.Th but lower for Tb.Sp and Tb.N compared to XtremeCT. Regarding the mechanical parameters, all scanners had high accuracy (R2 [Formula: see text] 0.96). While HR-pQCT is optimized for research, the fast scanning time and good accuracy renders CBCT a promising technique for high-resolution clinical scanning.

The effect of orthoses on the kinematics of the trapeziometacarpal, scaphotrapeziotrapezoidal, and radioscaphoid joints.

The in vivo effect of four different types of thumb and thumb-wrist orthoses on the three-dimensional kinematics of the trapeziometacarpal (TMC), scaphotrapeziotrapezoidal (STT) and radioscaphoid joints was quantified using computed tomography (CT). Eighteen healthy female volunteers were recruited. The dominant hand of each subject was scanned in four thumb and wrist positions, each in three conditions: without orthosis, with a thumb orthosis (Push Ortho and immediate fitting, IMF) and with a thumb-wrist orthosis (Ligaflex Manu and IMF). CT images were analyzed and rotations relative to the more proximal bone were expressed in a joint-specific coordinate system. Without orthosis, the largest STT rotations were observed during radioulnar deviation of the wrist and the STT range of motion (ROM) was significantly lower during wrist flexion-extension. All tested orthoses caused a significant reduction of the ROM at each joint compared to free motion. Significant differences in movement reduction were observed between prefabricated and IMF orthoses.The IMF thumb-wrist outperformed the Ligaflex Manu in terms of immobilization of the radioscaphoid joint. In addition, the IMF thumb orthosis immobilized the TMC joint significantly better during thumb abduction and adduction than the Push Ortho. We found that different types of thumb and thumb-wrist orthotics are effective in reducing joint mobility. While this reduction tends to be higher using IMF compared to prefabricated orthoses, this effect is only significant for the radioscaphoid and TMC joint. The finding that thumb movements do not induce large STT rotations suggests that the thumb does not need to be immobilized in case of isolated STT osteoarthritis.

Quantification of 3D microstructural parameters of trabecular bone is affected by the analysis software.

Over the last decades, the use of high-resolution imaging systems to assess bone microstructural parameters has grown immensely. Yet, no standard defining the quantification of these parameters exists. It has been reported that different voxel size and/or segmentation techniques lead to different results. However, the effect of the evaluation software has not been investigated so far. Therefore, the aim of this study was to compare the bone microstructural parameters obtained with two commonly used commercial software packages, namely IPL (Scanco, Switzerland) and CTan (Bruker, Belgium). We hypothesized that even when starting from the same segmented scans, different software packages will report different results. Nineteen trapezia and nineteen distal radii were scanned at two resolutions (20 µm voxel size with microCT and HR-pQCT 60 µm). The scans were segmented using the scanners' default protocol. The segmented images were analyzed twice, once with IPL and once with CTan, to quantify bone volume fraction (BV/TV), trabecular thickness (Tb.Th), trabecular separation (Tb.Sp), trabecular number (Tb.N) and specific bone surface (BS/BV). Only small differences between IPL and CTan were found for BV/TV. For Tb.Th, Tb.Sp and BS/BV high correlations (R2 ≥ 0.99) were observed between the two software packages, but important relative offsets were observed. For microCT scans, the offsets were relative constant, e.g., around 15% for Tb.Th. However, for the HR-pQCT scans the mean relative offsets ranged over the different bone samples (e.g., for Tb.Th from 14.5% to 19.8%). For Tb.N, poor correlations (0.43 ≤ R2 ≤ 0.81) for all tested cases were observed. We conclude that trabecular bone microstructural parameters obtained with IPL and CTan cannot be directly compared except for BV/TV. For Tb.Th, Tb.Sp and BS/BV, correction factors can be determined, but these depend on both the image voxel size and specific anatomic location. The two software packages did not produce consistent data on Tb.N. The development of a universal standard seems desirable.

A calcaneal tunnel for CFL reconstruction should be directed to the posterior inferior medial edge of the calcaneal tuberosity.

PURPOSE: Anatomical reconstruction of the calcaneofibular ligament (CFL) is a common technique to treat chronic lateral ankle instability. A bone tunnel is used to fix the graft in the calcaneus. The purpose of this study is to provide some recommendations about tunnel entrance and tunnel direction based on anatomical landmarks. METHODS: The study consisted of two parts. The first part assessed the lateral tunnel entrance for location and safety. The second part addressed the tunnel direction and safety upon exiting the calcaneum on the medial side. In the first part, 29 specimens were used to locate the anatomical insertion of the CFL based on the intersection of two lines related to the fibular axis and specific landmarks on the lateral malleolus. In the second part, 22 specimens were dissected to determine the position of the neurovascular structures at risk during tunnel drilling. Therefore, a method based on four imaginary squares using external anatomical landmarks was developed. RESULTS: For the tunnel entrance on the lateral side, the mean distance to the centre of the CFL footprint was 2.8 ± 3.0 mm (0-10.4 mm). The mean distance between both observers was 4.2 ± 3.2 mm (0-10.3 mm). The mean distance to the sural nerve was 1.4 ± 2 mm (0-5.8 mm). The mean distance to the peroneal tendons was 7.3 ± 3.1 mm (1.2-12.4 mm). For the tunnel exit on the medial side, the two anterior squares always contained the neurovascular bundle. A safe zone without important neurovascular structures was found and corresponded to the two posterior squares. CONCLUSION: Lateral landmarks enabled to locate the CFL footprint. Precautions should be taken to protect the nearby sural nerve. A safe zone on the medial side could be determined to guide safe tunnel direction. A calcaneal tunnel should be directed to the posterior inferior medial edge of the calcaneal tuberosity.

The intrinsic subtalar ligaments have a consistent presence, location and morphology.

BACKGROUND: Chronic subtalar instability is a disabling complication after acute ankle sprains. Currently, the literature describing the anatomy of the intrinsic subtalar ligaments is limited and equivocal which causes difficulties in diagnosis and treatment of subtalar instability. The purpose of this study is to assess the anatomical characteristics of the subtalar ligaments and to clarify some points of confusion. METHODS: In 16 cadaveric feet, the dimensions and locations of the subtalar ankle ligaments were assessed and measured. CT-scans before dissection and after indication of the footprints with radio-opaque paint allowed to generate 3D models and assess the footprint characteristics. RESULTS: The cervical ligament (CL) had similar dimensions as the lateral ligaments: anterior length 13.9 ± 1.5 mm, posterior length 18.5 ± 2.9 mm, talar width 13.6 ± 2.2 mm, calcaneal width 15.8 ± 3.7 mm. The anterior capsular ligament (ACaL) and interosseous talocalcaneal ligament (ITCL) were found to be smaller structures with consistent dimensions and locations. CONCLUSION: This study identified consistent characteristics of the intrinsic subtalar ligaments and clarifies the local anatomical situation. The dimensions and footprints of the intrinsic ligaments of the subtalar joint suggest a more important role of the CL and ACaL in the stability of the subtalar joint. The results of this study are relevant to improve diagnostic tools and offer some guidelines when reconstructing the injured ligaments.

Salvage Operation for a Failed Total Wrist Prosthesis and Darrach Procedure by Total Wrist Revision and Distal Radioulnar Joint Arthroplasty.

An unstable distal ulnar stump after Darrach resection, alongside pathology of the radiocarpal joint, is difficult to manage without fusion of at least one joint. Currently, no standard 2-in-1 arthroplasty is available. We report the case of a 72-year-old woman with loosening of the radial stem of a Universal 2 total wrist prosthesis combined with radioulnar impingement after a Darrach procedure. Because of poor radial bone stock, the standard fixation technique of a semi-constrained distal radioulnar joint prosthesis (Aptis) was not possible. We present a technique to fix the semi-constrained distal radioulnar joint prosthesis as well as a total wrist prosthesis by a custom 3-dimensional printed flange prosthesis to the ulnar border of the radius. Three years after surgery, the patient remained pain-free, with 60° flexion, 75° extension, 80° pronation, and 80° supination.

Does subtalar instability really exist? A systematic review.

BACKGROUND: Subtalar joint instability (STI) is considered as a potential source of chronic lateral hindfoot instability. However, clinical diagnosis of STI is still challenging. This systematic review was conducted to assess the consistency of the clinical entity "subtalar instability", to investigate the reliability of available diagnostic tools and to provide a critical overview of related studies. METHODS: A systematic review of the Medline, Web of Sciences and EMBASE databases was performed for studies reporting on tests to investigate subtalar instability or lesions of the subtalar ligaments. To investigate the relation with chronic STI, studies focusing on sinus tarsi syndrome (STS) or acute lesions of the subtalar ligaments were also included in the search strategy and were assessed separately. RESULTS: This review identified 25 studies focusing on different topics: chronic STI (16), acute lesions of the subtalar ligaments (5) and STS (4). Twelve studies, assessing STI, demonstrated the existence of a subgroup with instability complaints related to abnormal increased subtalar motion (7) or abnormalities of the subtalar ligaments (6). We found insufficient evidence for measuring subtalar tilting using stress radiographs. MRI was able to assess abnormalities of the ligaments and stress-MRI detected abnormally increased motion. CONCLUSION: Complaints of instability can be related to subtalar ligaments injuries and an abnormally increased motion of the subtalar joint. Stress radiographs should be interpreted with caution and should not have the status of a reference test. Clinical diagnosis should rely on several parameters including MRI.

An oblique fibular tunnel is recommended when reconstructing the ATFL and CFL.

PURPOSE: A bone tunnel is often used during the reconstruction of the anterior talofibular ligament (ATFL) and calcaneofibular ligament (CFL). The purpose of this study is to compare proposed directions for drilling this fibular tunnel and to assess potential tunnel length, using a 5-mm-diameter tunnel and surrounding bone. METHODS: Anonymous DICOM data from spiral CT-scan images of the ankle were obtained from 12 Caucasian patients: 6 females and 6 males. Virtual tunnels were generated in a 3D bone model with angles of 30°, 45°, 60° and 90° in relation to the fibular long axis. Several measurements were performed: distance from entrance to perforation of opposing cortex, shortening of the tunnel, distance from tunnel centre to bone surface. RESULTS: A tunnel in a perpendicular direction resulted in an average possible tunnel length of 16.8 (± 2.7) mm in the female group and 20.3 (± 3.4) mm in the male group. A tunnel directed at 30° offered the longest length: 30.9 (± 2.5) mm in the female group and 34.4 (± 2.9) mm in the male group. The use of a 5-mm-diameter tunnel in a perpendicular direction caused important shortening of the tunnel at the entrance in some cases. The perpendicular tunnel was very near to the digital fossa while the most obliquely directed tunnels avoided this region. CONCLUSION: An oblique tunnel allows for a longer tunnel and avoids the region of the digital fossa, thereby retaining more surrounding bone. In addition, absolute values of tunnel length are given, which can be useful when considering the use of certain implants. We recommend drilling an oblique fibular tunnel when reconstructing the ATFL and CFL.

Correlation Between Cone-Beam Computed Tomography and High-Resolution Peripheral Computed Tomography for Assessment of Wrist Bone Microstructure.

High-resolution peripheral quantitative computed tomography (HR-pQCT) is considered as the best technique to measure bone microarchitecture in vivo. However, a breakthrough for medical applications is inhibited because of the restricted field of view (∼9 mm) and a relatively long acquisition time (∼3 minutes). The goal of this study was to compare the accuracy of cone-beam computed tomography (CBCT) and HR-pQCT and to determine the agreement between CBCT and HR-pQCT in quantifying bone structural parameters. Nineteen trapezia of arthritic patients were scanned four times ex vivo: 1) CBCT (NewTom 5G, Cefla, at 75 µm); 2) HR-pQCT (XTremeCT-I, Scanco, at 82 µm); 3) HR-pQCT (XTremeCT-II, Scanco, at 60.7 µm); and 4) microCT (SkyScan1172, Bruker, at 19.84 µm). XTremeCT-I and XtremeCT-II were reconstructed, segmented, and analyzed following the manufacturer's guidelines. CBCT was reconstructed with in-house developed software and analyzed twice: once with an adaptive segmentation technique combined with a direct analysis method (AT-DM) and once with a Laplace-Hamming filtering technique combined with an indirect analysis method (LH-IM). Parameters of interest included bone volume fraction (BV/TV) and trabecular thickness (Tb.Th), separation (Tb.Sp), and number (Tb.N). The analyses of the CBCT data showed that the AT-DM analysis correlated better with microCT for BV/TV, Tb.Sp, and Tb.N, whereas the LH-IM technique correlated better for Tb.Th. Evaluated over all parameters, the coefficient of determination for XtremeCT-I, XtremeCT-II, and CBCT were higher as R2 = 0.68, 0.72, and 0.67, respectively. For CBCT, the correlations improved when three samples with very thin trabeculae close to each other were excluded and became similar to those for XtremeCT-I and XtremeCT-II. Interesting for clinical practice is that those bones could be identified automatically with the CBCT scanner. We conclude that CBCT produced similar accuracy as HR-pQCT in bone morphometric analyses of trapezia. The broader range of application, larger field of view, and shorter acquisition time make CBCT a valuable alternative to HR-pQCT. © 2019 American Society for Bone and Mineral Research.