RESUMO
PURPOSE: To compare vision-related (VR-QOL) and health-related quality of life (HR-QOL) in patients with noninfectious uveitis treated with systemic anti-inflammatory therapy versus nonsystemic therapy. METHODS: A prospective, cross-sectional study design was employed. VR-QOL and HR-QOL were assessed by the 25-Item Visual Function Questionnaire (VFQ-25) and the Short Form 12-Item Health Survey (SF-12), respectively. Multivariate regression analysis was performed to assess the VR-QOL and HR-QOL based on treatment. RESULTS: Among the 80 patients, the median age was 51 years with 28 males (35%). The adjusted effect of treatment modality on VR-QOL or HR-QOL showed no statistically significant difference in all subscores of VFQ-25 or physical component score (PCS) and mental component score (MCS) of SF-12. Systemic therapy did not compromise VR-QOL or HR-QOL compared to nonsystemic therapy. CONCLUSIONS: Systemic therapy can be effectively used to control serious cases of noninfectious uveitis without significant relative adverse impact on quality of life.
Assuntos
Anti-Inflamatórios/uso terapêutico , Nível de Saúde , Qualidade de Vida , Uveíte/psicologia , Acuidade Visual , Adolescente , Adulto , Idoso , Idoso de 80 Anos ou mais , Estudos Transversais , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Estudos Prospectivos , Inquéritos e Questionários , Uveíte/tratamento farmacológico , Uveíte/fisiopatologia , Adulto JovemRESUMO
BACKGROUND: Little is known about the environmental and public health impact of unconventional natural gas extraction activities, including hydraulic fracturing, that occur near residential areas. OBJECTIVES: Our aim was to assess the relationship between household proximity to natural gas wells and reported health symptoms. METHODS: We conducted a hypothesis-generating health symptom survey of 492 persons in 180 randomly selected households with ground-fed wells in an area of active natural gas drilling. Gas well proximity for each household was compared with the prevalence and frequency of reported dermal, respiratory, gastrointestinal, cardiovascular, and neurological symptoms. RESULTS: The number of reported health symptoms per person was higher among residents living < 1 km (mean ± SD, 3.27 ± 3.72) compared with > 2 km from the nearest gas well (mean ± SD, 1.60 ± 2.14; p = 0.0002). In a model that adjusted for age, sex, household education, smoking, awareness of environmental risk, work type, and animals in house, reported skin conditions were more common in households < 1 km compared with > 2 km from the nearest gas well (odds ratio = 4.1; 95% CI: 1.4, 12.3; p = 0.01). Upper respiratory symptoms were also more frequently reported in persons living in households < 1 km from gas wells (39%) compared with households 1-2 km or > 2 km from the nearest well (31 and 18%, respectively) (p = 0.004). No equivalent correlation was found between well proximity and other reported groups of respiratory, neurological, cardiovascular, or gastrointestinal conditions. CONCLUSION: Although these results should be viewed as hypothesis generating, and the population studied was limited to households with a ground-fed water supply, proximity of natural gas wells may be associated with the prevalence of health symptoms including dermal and respiratory conditions in residents living near natural gas extraction activities. Further study of these associations, including the role of specific air and water exposures, is warranted.
Assuntos
Exposição Ambiental/estatística & dados numéricos , Gás Natural , Campos de Petróleo e Gás , Adolescente , Adulto , Criança , Feminino , Água Subterrânea , Nível de Saúde , Inquéritos Epidemiológicos , Humanos , Masculino , Pennsylvania/epidemiologia , Doenças Respiratórias/epidemiologia , Dermatopatias/epidemiologia , Abastecimento de ÁguaRESUMO
BACKGROUND: Isocyanates are one of the most commonly reported causes of occupational asthma; however, the risks of developing isocyanate asthma in modern production facilities remain poorly defined. We evaluated TDI exposure and respiratory health among an inception cohort of workers during their first year of employment at a new polyurethane foam production factory. METHODS: Forty-nine newly hired workers were evaluated pre-employment, 6-months, and 12-months post-employment through questionnaire, spirometry, and TDI-specific serology. Airborne TDI levels were monitored by fixed-point air sampling and limited personal sampling. Qualitative surface SWYPE™ tests were performed to evaluate potential sources of skin exposure. RESULTS: Airborne TDI levels overall were low; over 90% of fixed-point air measurements were below the limit of detection (0.1 ppb). Over the first year of employment, 12 of the 49 original workers (24.5%) were lost to follow-up, no additional workers were enrolled, and seven of the 49 original workers (14.2%) developed either new asthma symptoms (N = 3), TDI-specific IgG (N = 1), new airflow obstruction (N = 1) and/or a decline in FEV1 ≥ 15% (N = 3), findings that could indicate TDI-related health effects. The prevalence of current asthma symptoms was significantly higher in the workers lost to follow-up compared to those who completed the 12-month follow-up (25% vs. 2.7%; P = 0.04). CONCLUSIONS: The findings suggest possible early TDI-related health effects in a modern polyurethane production plant. These findings also highlight the need for further longitudinal evaluation of these workers and the challenges of studying workers at risk for isocyanate asthma.
Assuntos
Poluentes Ocupacionais do Ar/toxicidade , Obstrução das Vias Respiratórias/epidemiologia , Asma Ocupacional/epidemiologia , Exposição Ocupacional/efeitos adversos , Tolueno 2,4-Di-Isocianato/toxicidade , Adulto , Poluentes Ocupacionais do Ar/análise , Obstrução das Vias Respiratórias/induzido quimicamente , Asma Ocupacional/induzido quimicamente , Feminino , Seguimentos , Volume Expiratório Forçado , Humanos , Imunoglobulina E/sangue , Imunoglobulina G/sangue , Perda de Seguimento , Masculino , Pessoa de Meia-Idade , Exposição Ocupacional/análise , Poliuretanos/síntese química , Prevalência , Estudos Prospectivos , Fatores de Tempo , Tolueno 2,4-Di-Isocianato/análise , Tolueno 2,4-Di-Isocianato/imunologia , Capacidade Vital , Adulto JovemRESUMO
Isocyanates, the essential cross-linking chemicals used to make polyurethane, are potent sensitizers and a common cause of occupational asthma. In addition, isocyanate (NCO) skin contact may contribute to the development of isocyanate asthma. Prior work has shown that unbound NCO can persist on recently spray coated auto body parts after appearing dry. The purpose of this study was to assess whether isocyanate skin exposure can result from handling such surfaces. Quantitative surface and skin wipe sampling for total NCO was performed on test panels sprayed with aliphatic isocyanate coatings, and on paired skin samples obtained from participants who had rubbed the recently dried surfaces. Surface and skin samples, obtained from 18 workers in five auto body shops, were prepared following NIOSH method 5525 (modified for skin samples), and isocyanate species derived from hexamethylene diisocyanate and isophorone diisocyanate were analyzed using high-performance liquid chromatography with ultraviolet and fluorescence detectors. Quantifiable unbound NCO species were detected on 84.2% of all sprayed surfaces sampled after initially considered dry. Only 7 out of a total of 104 (6.7%) non-compounded skin samples obtained after contact with the recently dried coatings had detectable quantities of free NCO. The 7 positive samples, all obtained at the initial sampling time (t(0)), had a geometric mean of 0.016 µg NCO cm(-2) (range: 0.002-0.88 µg NCO cm(-2)). Only 1 of 12 (8.3%) of skin samples obtained after compounding contained detectable free NCO. The risk of substantial human isocyanate skin exposure from contact with the dry appearing (yet not fully cured) isocyanate coatings evaluated in this study appears to be low, although other isocyanate coatings and tasks may pose a greater risk of NCO skin exposure.
Assuntos
Asma Ocupacional/induzido quimicamente , Poluentes Ambientais/análise , Isocianatos/análise , Veículos Automotores , Exposição Ocupacional/análise , Pintura , Poluentes Ambientais/química , Poluentes Ambientais/toxicidade , Humanos , Isocianatos/química , Isocianatos/toxicidade , Pele/químicaRESUMO
OBJECTIVES: Isocyanate chemicals essential for polyurethane production are widely used industrially, and are increasingly found in consumer products. Asthma and other adverse health effects of isocyanates are well-documented and exposure surveillance is crucial to disease prevention. Hexamethylene diisocyanate (HDI)-specific serum immunoglobulin G (IgG) was evaluated as an exposure biomarker among workers at a US Air Force Air Logistics Center, which includes a large aircraft maintenance facility. METHODS: HDI-specific IgG (HDI-IgG) titers in serum samples (n = 74) were measured using an enzyme-linked immunosorbent assay based upon the biuret form of HDI conjugated to human albumin. Information on personal protective equipment (PPE), work location/tasks, smoking, asthma history, basic demographics, and HDI skin exposure was obtained through questionnaire. RESULTS: HDI-specific serum IgG levels were elevated in n = 17 (23%) of the workers studied. The prevalence and/or end-titer of the HDI-IgG was significantly (P < 0.05) associated with specific job titles, self-reported skin exposure, night-shift work, and respirator use, but not atopy, asthma, or other demographic information. The highest titers were localized to specific worksites (C-130 painting), while other worksites (generator painting) had no or few workers with detectable HDI-IgG. CONCLUSIONS: HDI-specific immune responses (IgG) provide a practical biomarker to aid in exposure surveillance and ongoing industrial hygiene efforts. The strategy may supplement current air sampling approaches, which do not assess exposures via skin, or variability in PPE use or effectiveness. The approach may also be applicable to evaluating isocyanate exposures in other settings, and may extend to other chemical allergens.
Assuntos
Asma/induzido quimicamente , Cianatos/análise , Imunoglobulina G/análise , Exposição Ocupacional/efeitos adversos , Adulto , Idoso , Asma/imunologia , Asma/prevenção & controle , Biomarcadores/análise , Biomarcadores/sangue , Cianatos/efeitos adversos , Ensaio de Imunoadsorção Enzimática , Feminino , Humanos , Imunoglobulina G/sangue , Imunoglobulina G/imunologia , Isocianatos , Masculino , Pessoa de Meia-Idade , Pintura/efeitos adversos , Poliuretanos/efeitos adversos , Adulto JovemRESUMO
BACKGROUND AND AIM: The relationship between hormone therapy (HT) and invasive breast cancer has been extensively investigated, but the relationship between HT and in situ breast cancer has received relatively little attention. We examined the relationship between HT and ductal carcinoma in situ (DCIS) among postmenopausal women who participated in a population-based case-control study in Connecticut, USA. METHODS: This analysis included 1179 post-menopausal women (603 controls and 576 cases), who comprised a subset of a population-based case-control study that included all incident cases of breast carcinoma in situ (BCIS) in Connecticut and frequency-matched controls by 5-year age intervals. RESULTS: We found no association between DCIS and ever use of any HT (adjusted odds ratio (OR)=0.85, 95% confidence interval (CI): 0.65-1.11); of estrogen alone (adjusted OR=0.93; 95% CI: 0.68-1.29) or of estrogen and progesterone (adjusted OR=0.75; 95% CI: 0.52-1.08). There was also no association between DCIS and current use of these hormones. In addition, estimated risk of DCIS did not increase with duration of use of these preparations. CONCLUSIONS: These results add to a small literature that remains inconclusive. To determine whether HT poses risk of in situ breast cancer, larger studies with greater power and precise control of important covariates (e.g., mammography screening) are needed, as are meta-analyses of available data.
Assuntos
Neoplasias da Mama/epidemiologia , Carcinoma in Situ/epidemiologia , Carcinoma Ductal de Mama/epidemiologia , Terapia de Reposição de Estrogênios/efeitos adversos , Adulto , Idoso , Estudos de Casos e Controles , Feminino , Humanos , Pessoa de Meia-Idade , Razão de ChancesRESUMO
OBJECTIVES: Isocyanate skin exposure may play an important role in sensitization and the development of isocyanate asthma, but such exposures are frequently intermittent and difficult to assess. Exposure metrics are needed to better estimate isocyanate skin exposures. The goal of this study was to develop a semiquantitative algorithm to estimate personal skin exposures in auto body shop workers using task-based skin exposure data and daily work diaries. The relationship between skin and respiratory exposure metrics was also evaluated. METHODS: The development and results of respiratory exposure metrics were previously reported. Using the task-based data obtained with a colorimetric skin exposure indicator and a daily work diary, we developed a skin exposure algorithm to estimate a skin exposure index (SEI) for each worker. This algorithm considered the type of personal protective equipment (PPE) used, the percentage of skin area covered by PPE and skin exposures without and underneath the PPE. The SEI was summed across the day (daily SEI) and survey week (weekly average SEI) for each worker, compared among the job title categories and also compared with the respiratory exposure metrics. RESULTS: A total of 893 person-days was calculated for 232 workers (49 painters, 118 technicians and 65 office workers) from 33 auto body shops. The median (10th-90th percentile, maximum) daily SEI was 0 (0-0, 1.0), 0 (0-1.9, 4.8) and 1.6 (0-3.5, 6.1) and weekly average SEI was 0 (0-0.0, 0.7), 0.3 (0-1.6, 4.2) and 1.9 (0.4-3.0, 3.6) for office workers, technicians and painters, respectively, which were significantly different (P < 0.0001). The median (10th-90th percentile, maximum) daily SEI was 0 (0-2.4, 6.1) and weekly average SEI was 0.2 (0-2.3, 4.2) for all workers. A relatively weak positive Spearman correlation was found between daily SEI and time-weighted average (TWA) respiratory exposure metrics (microg NCO m(-3)) (r = 0.380, n = 893, P < 0.0001) and between weekly SEI and TWA respiratory exposure metrics (r = 0.482, n = 232, P < 0.0001). CONCLUSIONS: The skin exposure algorithm developed in this study provides task-based personal daily and weekly average skin exposure indices that are adjusted for the use of PPE. These skin exposure indices can be used to assess isocyanate exposure-response relationships.
Assuntos
Exposição Ocupacional/análise , Poliuretanos/análise , Pele/efeitos dos fármacos , Algoritmos , Automóveis , Monitoramento Ambiental/métodos , Humanos , Poliuretanos/farmacologiaRESUMO
Because many occupational epidemiologic studies use exposure surrogates rather than quantitative exposure metrics, the UMass Lowell and Yale study of autobody shop workers provided an opportunity to evaluate the relative utility of surrogates and quantitative exposure metrics in an exposure response analysis of cross-week change in respiratory function. A task-based exposure assessment was used to develop several metrics of inhalation exposure to isocyanates. The metrics included the surrogates, job title, counts of spray painting events during the day, counts of spray and bystander exposure events, and a quantitative exposure metric that incorporated exposure determinant models based on task sampling and a personal workplace protection factor for respirator use, combined with a daily task checklist. The result of the quantitative exposure algorithm was an estimate of the daily time-weighted average respirator-corrected total NCO exposure (microg/m(3)). In general, these four metrics were found to be variable in agreement using measures such as weighted kappa and Spearman correlation. A logistic model for 10% drop in FEV(1) from Monday morning to Thursday morning was used to evaluate the utility of each exposure metric. The quantitative exposure metric was the most favorable, producing the best model fit, as well as the greatest strength and magnitude of association. This finding supports the reports of others that reducing exposure misclassification can improve risk estimates that otherwise would be biased toward the null. Although detailed and quantitative exposure assessment can be more time consuming and costly, it can improve exposure-disease evaluations and is more useful for risk assessment purposes. The task-based exposure modeling method successfully produced estimates of daily time-weighted average exposures in the complex and changing autobody shop work environment. The ambient TWA exposures of all of the office workers and technicians and 57% of the painters were found to be below the current U.K. Health and Safety Executive occupational exposure limit (OEL) for total NCO of 20 microg/m(3). When respirator use was incorporated, all personal daily exposures were below the U.K. OEL.
Assuntos
Poluentes Ocupacionais do Ar/análise , Automóveis , Exposição por Inalação/análise , Isocianatos/análise , Exposição Ocupacional/análise , Algoritmos , Monitoramento Ambiental/métodos , Humanos , Medição de RiscoRESUMO
BACKGROUND: Skin exposure to isocyanates, in addition to respiratory exposures, may contribute to sensitization and asthma. Quantitative skin exposure data are scarce and quantitative methods limited. METHODS: As part of the Survey of Painters and Repairers of Autobodies by Yale study, a method to sample and quantify human isocyanate skin exposure was developed (based on NIOSH 5525 method) and used to evaluate aliphatic isocyanate skin exposure in 81 auto body shop painters and body technicians. Wipe samples were collected from unprotected skin and from under PPE (gloves, clothing and respirator) using a polypropylene glycol-impregnated wipe. Hexamethylene diisocyanate (HDI), its polyisocyanates [HDI-derived polyisocyanates (pHDI)], isophorone diisocyanate (IPDI) and its polyisocyanates and IPDI-derived polyisocyanates (pIPDI) were quantified separately and also expressed as the total free isocyanate groups (total NCO). RESULTS: For unprotected skin areas, 49 samples were collected for spray painting, 13 for mixing, 27 for paint-related tasks (e.g. sanding and compounding) and 53 for non-paint-related tasks. Forty-three samples were also collected under PPE. The geometric mean (GM) [geometric standard deviation (GSD)] total NCO concentrations (ng NCO cm(-2)) for unprotected skin (hands, face and forearms) was 1.9 (10.9) and range 0.0-64.4. pHDI species were the major contributor to the total NCO content. Levels were very variable, with the highest concentrations measured for clear coating and paint mixing tasks. Isocyanate skin exposure was also commonly detected under PPE, with 92% of samples above the limit of detection. Levels were very variable with the overall GM (GSD) total NCO (ng NCO cm(-2)) under PPE 1.0 (5.2) and range (0.0-47.0) and similar under the different PPE (glove, respirator and clothing). The highest concentrations were detected for mixing and spraying tasks, 6.9 (5.3) and 1.0 (5.2), respectively. Levels under PPE were generally lower than unpaired samples obtained with no PPE, but not statistically significant. Total isocyanate GM load on exposed skin and under PPE was commonly 100-300 ng NCO per sample, except for higher levels on exposed forearms during spraying (GM 5.9 mug NCO). CONCLUSIONS: A quantitative method was developed for skin sampling of isocyanates. Using this method, the study demonstrates that skin exposure to aliphatic polyisocyanates during painting, mixing and paint-related tasks in auto body shop workers is common and also commonly detected under routine PPE.
Assuntos
Poluentes Ocupacionais do Ar/efeitos adversos , Automóveis , Dermatite Ocupacional/etiologia , Substâncias Perigosas/efeitos adversos , Isocianatos/efeitos adversos , Pintura/efeitos adversos , Cromatografia Líquida de Alta Pressão , Humanos , Masculino , Exposição Ocupacional/prevenção & controle , Pintura/análise , Poliuretanos/efeitos adversos , Medição de Risco , Absorção Cutânea/fisiologiaRESUMO
OBJECTIVES: Although respiratory exposures have been the primary concern with isocyanates, skin exposure also can occur and may contribute to sensitization and asthma. Methodologies to assess isocyanate skin exposure in the workplace are limited and skin exposure data scarce. The goals of this study were (i) to evaluate and validate the isocyanate colorimetric indicators against a quantitative assay, (ii) to evaluate the extent of isocyanate surface contamination and skin exposure among auto body shop workers and (iii) to evaluate isocyanate skin exposure determinants. METHODS: The colorimetric indicators were compared with a high-performance liquid chromatography (HPLC) quantitative assay based on the National Institute for Occupational Safety and Health Method 5525 using paired laboratory sampling. The colorimetric indicators were then used to assess surface contamination and skin exposure to aliphatic isocyanates in 35 auto body shops and 124 workers as part of an epidemiologic study. The positive sample rate was calculated for various surfaces, body parts and tasks. The color intensity of the colorimetric indicators was rated on a scale 0 (yellow color) to 5 (deep red). Side-by-side comparisons of the qualitative method with the quantitative HPLC assay were also performed in the field using paired samples. RESULTS: Laboratory and field evaluation validated use of the colorimetric indicators. The rate of positive surface samples for isocyanates was 46% (n = 145/313). Thirty-four percent (73/216) of samples were positive for unprotected skin and 20% (n = 22/111) for skin under latex gloves. The highest positive rate observed on skin samples was obtained after paint mixing and spraying tasks. The colorimetric indicators were highly specific for isocyanates, but false negatives occurred when compared with the more sensitive HPLC quantitative assay. The presence of surface contamination and the performance of paint-related tasks were the major determinants of isocyanate skin exposure. CONCLUSIONS: This study documents extensive surface contamination and skin exposure, including under gloves, to aliphatic polyisocyanates during painting and paint mixing tasks in auto body shop workers. Contaminated surfaces and aerosol deposition during spray painting may both contribute to skin exposure. The colorimetric indicator is a quick, practical and low-cost, but not highly sensitive, industrial hygiene tool to detect isocyanate surface contamination and skin exposures following the use of isocyanate-containing products.
Assuntos
Poluentes Ocupacionais do Ar/toxicidade , Substâncias Perigosas/toxicidade , Isocianatos/toxicidade , Exposição Ocupacional/efeitos adversos , Pintura/toxicidade , Poliuretanos/toxicidade , Automóveis , Cromatografia Líquida de Alta Pressão/métodos , Colorimetria/métodos , Humanos , Absorção CutâneaRESUMO
Two-component, polyurethane paints containing aliphatic isocyanates are widely used in autobody spray painting. Such isocyanates can cause asthma, and skin exposure may be an important route of sensitization and may contribute to the development of isocyanate asthma. Autobody workers are frequently in contact with recently painted, dried auto parts. It is not known how fast the newly painted car surfaces are fully cured, that is, for how long unbound, isocyanate species remain on painted surfaces after initial drying. To address this question, scrap sections of auto bodies were painted and dried by autobody shop painters following regular practice. Routinely used paints were sprayed 23 different times on the parts. Drying was accomplished by baking the part in a paint spray booth by heating it with a heat lamp or air drying in the shop. The 23 sprayed surfaces were sampled at regular time intervals after drying to determine the presence of free NCO groups using the semiquantitative SWYPE technique. Quantitative isocyanate analysis was also performed on two sprayed parts using NIOSH method 5525. Geometric mean curing time of 23 painted surfaces was 56.4 hr (range: 0.8 hrs to 32 days). Unbound isocyanate species of similar composition to the original bulk material remained present on the majority of sampled painted surfaces for up to 120 hours for typical paint formulations and for 1 month for others. The actual curing of polyurethane paints in autobody refinishing can be a slow process. Unbound isocyanates may remain on the surface of painted car parts for prolonged periods (days to weeks) after dried. Such surfaces are an under-recognized potential source of skin exposure to autobody workers.
Assuntos
Automóveis , Cianatos/análise , Exposição Ocupacional , Pintura/análise , Poliuretanos/análise , Humanos , Isocianatos , Pele , Fatores de TempoRESUMO
This study, part of the Survey of Painters and Repairers of Auto bodies by Yale (SPRAY), evaluated the effectiveness of respiratory protection against exposure to aliphatic polyisocyanates. A total of 36 shops were assessed for respiratory protection program completeness; 142 workers were measured for respirator fit factor (FF) using PortaCount Plus respirator fit tester. Twenty-two painters from 21 shops were sampled using NIOSH method 5525 to determine the workplace protection factor (WPF) of negative pressure, air-purifying half-facepiece respirators equipped with organic vapor cartridges and paint prefilters during spray-painting and priming activities. Only 11 shops (30%) had written respiratory protection programs. Eighty percent of all fit tested workers passed the test on the first try with FF >or= 100, and 92% passed the second test after respirator use training. Overall geometric mean (GM) FF was 1012 for all fit tested workers. Significant differences on pass rate (92% vs. 72%) and on FF (1990 vs. 736) were found between previously fit tested workers vs. nontested workers. Twenty-nine WPF samples were collected. The outside facepiece GM concentration of total isocyanate group (NCO) was 378.4 micro g NCO/m(3) with 96% concentrations exceeding the U.K. short-term exposure limit, 70 micro g NCO/m(3), but no in-facepiece concentrations exceeded the limit. The GM WPF of total NCO was 319 (GSD 4) and the 5th percentile was 54. WPF of total NCO was positively correlated with the duration of painting task. FF positively correlated with WPF when FF was
Assuntos
Exposição por Inalação/prevenção & controle , Exposição Ocupacional/prevenção & controle , Dispositivos de Proteção Respiratória/normas , Adulto , Poluentes Ocupacionais do Ar , Automóveis , Connecticut , Monitoramento Ambiental , Humanos , Isocianatos , PinturaRESUMO
Isocyanates may cause contact dermatitis and respiratory sensitization leading to asthma. Dermal exposure to aliphatic isocyanates in auto body shops is very common. However, little is known about the effectiveness of available commercial products used for decontaminating aliphatic polyisocyanates. This experimental study evaluated the decontamination effectiveness of aliphatic polyisocyanates for several skin and surface decontaminants available for use in the auto body industry. The efficiency of two major decontamination mechanisms, namely (i) consumption of free isocyanate groups via chemical reactions with active hydrogen components of the decontaminant and (ii) physical removal processes such as dissolution were studied separately for each decontaminant. Considerable differences were observed among surface decontaminants in their rate of isocyanate consumption, of which those containing free amine groups performed the best. Overall, Pine-Sol(R) MEA containing monoethanolamine was the most efficient surface decontaminant, operating primarily via chemical reaction with the isocyanate group. Polypropylene glycol (PPG) had the highest physical removal efficiency and the lowest reaction rate with isocyanates. All tested skin decontaminants performed similarly, accomplishing decontamination primarily via physical processes and removing 70-80% of isocyanates in one wiping. Limitations of these skin decontaminants are discussed and alternatives presented. In vitro testing using animal skins and in vivo testing with field workers are being conducted to further assess the efficiency and identify related determinants.
Assuntos
Descontaminação , Detergentes , Isocianatos , Polímeros , Pele , Triazinas , Automóveis , Etanolamina/química , Humanos , PropilenoglicóisRESUMO
Isocyanates, known to cause respiratory sensitization and asthma, are widely used in automotive refinishing where exposures to aliphatic polyisocyanates occur by both inhalation and skin contact. The work reported here, the characterization of isocyanate exposure in the autobody industry, was part of an epidemiologic study of workers in 37 autobody shops in Connecticut. This article describes workplaces, tasks, and controls, and outlines the frequency, duration, and intensity of isocyanate exposures. Personal air samples taken outside of respirators had median concentrations of 66.5 microg NCO/m3 for primer, 134.4 microg (NCO)/m3 for sealer, and 358.5 microg NCO/m3 for clearcoat. Forty-eight percent of primer, 66% of sealer, and 92% of clearcoat samples exceeded the United Kingdom Health and Safety Executive guideline for isocyanate, though none exceeded the National Institute for Occupational Safety and Health (NIOSH) recommended exposure limit for monomer. Nonisocyanate-containing primers and sealers are used in more than half the shops, but nonisocyanate clearcoats are rare. Eighty-two percent of personal samples taken within a spray booth exceeded the U.K. guideline: 81% of those in downdraft spray booths, 74% in semidowndraft booths, and 92% in crossdraft booths. Only 8% of shops reported that spraying is done exclusively in spray booths. All painters wore some type of respirator. In 30% of shops, painters used supplied air respirators; the rest relied on half face organic vapor cartridge respirators with N95 overspray pads. All shops provided some type of gloves, usually latex, not recommended for isocyanate protection. Despite improvements in autobody shop materials, practices, and controls, there are still opportunities for substantial exposures to isocyanates.
Assuntos
Poluição do Ar em Ambientes Fechados/análise , Isocianatos/análise , Veículos Automotores , Exposição Ocupacional , Connecticut , Coleta de Dados , Estudos Epidemiológicos , Humanos , National Institute for Occupational Safety and Health, U.S. , Pintura , Projetos de Pesquisa , Estados Unidos , Local de TrabalhoRESUMO
BACKGROUND: Determination of polyisocyanates is important because they are a major contributor of exposure to the isocyanate functional group in many workplace environments and are capable of inducing sensitization and asthma. However, with multiple different measurement metrics in use, comparison of isocyanate exposure data between studies and development of occupational exposure limits (OELs) for polyisocyanates is difficult. METHODS: An analysis of existing problems in the measurement and regulation of isocyanates is presented based on the published analytical, toxicological, and regulatory literature, and the authors' own analytical data and experience with isocyanates. RESULTS: This analysis supports a need for standardization of isocyanate measurement metrics and provides a framework for the development of an OEL for polyisocyanates. CONCLUSIONS: The total isocyanate group (microg NCO/m(3)) is recommended as the most feasible and practical metric (unit) by which to express polyisocyanate exposures for research, control, and regulatory purposes. The establishment of a comprehensive isocyanate OEL that simplifies the current agent-by-agent approach and expands coverage to polyisocyanates is also recommended.
Assuntos
Poluentes Ocupacionais do Ar/toxicidade , Isocianatos/toxicidade , Exposição Ocupacional , Poluentes Ocupacionais do Ar/análise , Poluentes Ocupacionais do Ar/química , Animais , Asma/induzido quimicamente , Monitoramento Ambiental/métodos , Humanos , Hipersensibilidade/etiologia , Isocianatos/análise , Isocianatos/química , Concentração Máxima Permitida , Estrutura Molecular , Local de TrabalhoRESUMO
The use of urinary hexane diamine (HDA) as a biomarker to assess human respiratory exposure to hexamethylene diisocyanate (HDI) aerosol was evaluated. Twenty-three auto body shop workers were exposed to HDI biuret aerosol for two hours using a closed exposure apparatus. HDI exposures were quantified using both a direct-reading instrument and a treated-filter method. Urine samples collected at baseline, immediately post exposure, and every four to five hours for up to 20 hours were analyzed for HDA using gas chromatography and mass spectrometry. Mean urinary HDA (microg/g creatinine) sharply increased from the baseline value of 0.7 to 18.1 immediately post exposure and decreased rapidly to 4.7, 1.9 and 1.1, respectively, at 4, 9, and 18 hours post exposure. Considerable individual variability was found. Urinary HDA can assess acute respiratory exposure to HDI aerosol, but may have limited use as a biomarker of exposure in the workplace.
Assuntos
Poluentes Ocupacionais do Ar/toxicidade , Cianatos/toxicidade , Diaminas/urina , Adolescente , Adulto , Aerossóis , Idoso , Biomarcadores/urina , Feminino , Humanos , Exposição por Inalação/efeitos adversos , Isocianatos , Masculino , Pessoa de Meia-Idade , Exposição Ocupacional/efeitos adversosRESUMO
BACKGROUND: The bioreactivity of isocyanate, a leading cause of occupational asthma, has led to uncertainty regarding the chemical's antigenicity and mechanisms that elicit immunopathology. OBJECTIVE: To understand better the biologically relevant antigenic forms of hexamethylene diisocyanate (HDI), commonly used in the auto body industry. METHODS: Human albumin was exposed to HDI vapors through a novel approach designed to model the air-liquid interface of the human airway. Vapor HDI-exposed albumin was characterized by electrophoresis, chemical substitution analysis, mass spectrometry, and serology studies on auto body shop workers (N=203) and HDI asthmatics (N=11). RESULTS: HDI vapors caused significant changes in the shape and/or charge of human albumin, which differed from albumin exposed to liquid phase HDI, with lower isocyanate substitution ratios and distinct electrophoretic mobility. Specific sites of vapor HDI conjugation to albumin were identified at His(247) and Lys(414). Vapor HDI-exposed albumin was specifically recognized by the humoral arm of the human immune system, with a strong dependence on albumin as the carrier. Vapor HDI-exposed albumin-specific IgG titers were significantly associated with HDI exposure (P=.001), and specific IgE was detectable in 55% (6/11) of isocyanate asthmatics versus 1.5% (3/203) of exposed healthy workers. Parallel studies using HDI-exposed albumin conjugates produced by previously published methods showed less significant associations of HDI-specific IgG and IgE with exposure and disease, respectively. CONCLUSION: HDI-albumin conjugates produced by novel vapor phase exposure methods may be more physiologically relevant than those produced by previously published methods and of greater utility in characterizing the immune responses associated with HDI exposure and asthma.
Assuntos
Albuminas/imunologia , Asma/etiologia , Cianatos/imunologia , Exposição Ocupacional , Cianatos/química , Géis , Humanos , Imunoglobulina E/sangue , Imunoglobulina G/sangue , Isocianatos , Espectrometria de Massas por Ionização e Dessorção a Laser Assistida por Matriz , VolatilizaçãoRESUMO
The methacholine challenge test protocol was assessed in the reanalysis of three occupational studies. We evaluated the impact of truncating the range of methacholine on responsiveness, as defined by slope and PC(20). In original analysis, reactivity was similar for apprentices and auto body shop workers, whereas boilermakers were more responsive. Truncating high concentrations did not change the classification of subjects with PC(20) <8 or 16 in any population. However, when responsiveness was measured by slope, the mean responsiveness increased, from -7.9 to -15.3 for apprentices and -7.2 to -10.0 for auto-body shop workers. Results support the American Thoracic Society's recommended maximum of 16 mg/ml and provide evidence that extending the dose range beyond that does not increase sensitivity, whereas stopping before 16 may exaggerate response. Furthermore, to ensure validity, neither slope nor PC(20) should be extrapolated beyond data.