Measurement of isoniazid in tuberculosis patients using finger sweat with creatinine normalisation: A controlled administration study.

BACKGROUND: Insufficient exposure and poor compliance with anti-tuberculosis (TB) medications are risk factors for treatment failure and the development of drug resistance. Measurement of drugs in biological samples, such as blood and saliva, can be used to assess adherence and make dose adjustments by therapeutic drug monitoring (TDM). Finger sweat testing is a convenient and non-invasive method to monitor patients. OBJECTIVES: To assess the feasibility of finger sweat testing for medication adherence and as a semi-quantitative tool for TDM analysis. METHODS: Ten patients provided finger sweat, blood and saliva samples following a controlled dose of isoniazid. Samples were analysed by liquid chromatography-mass spectrometry. RESULTS: Isoniazid can be detected in finger sweat 1-6 h following administration at typically prescribed dosages. The normalisation of isoniazid to creatinine increases the correlation between finger sweat and serum isoniazid concentration and provides a means to account for inconsistent sample volumes. CONCLUSION: We describe the time-course measurement of isoniazid (or drug-to-creatinine ratio) in finger sweat compared to the pharmacokinetic profile in blood for the first time. This technique, adaptable for other drugs, could reduce the burden on clinics and improve patient experience.

Isoniazid and rifampicin exposure during treatment in drug-susceptible TB.

BACKGROUND: Observational real-world studies on therapeutic drug monitoring (TDM) in relation to pharmacokinetic (PK) target values are lacking. This study aims to describe the PK of rifampicin (RIF) and isoniazid (INH) in a real-world setting of patients with drug-susceptible TB in relation to frequently used threshold values.METHODS: A total of 116 patients with TB using standard doses of RIF and INH and who had TDM as part of clinical care were included. Maximum plasma concentration (Cmax) and 24 h area under the concentration time curve (AUC24) at standard and revised doses were described in relation to the threshold values (Cmax ≥8 mg/L for RIF and ≥3 mg/L for INH).RESULTS: For RIF (100 patients), median Cmax and median AUC24 were respectively 7.9 mg/L (IQR 6.0-11.0) and 35.8 mg*h/L (IQR 27.4-57.3) at the first TDM measurement after a standard dose of 600 mg. For INH (90 patients), median Cmax and median AUC24 were respectively 2.9 mg/L (IQR 1.3-2.5) and 12.5 mg*h/L (IQR 8.7-18.9) at the first TDM after a standard dose 300 mg. Overall, more than 50% of study participants had drug exposure below threshold values at the first TDM.CONCLUSION: Our study shows that the measured Cmax values for both RIF and INH were frequently below the pre-specified targets, emphasising the need for better justification of drug exposure targets. These TDM results highlight the need for validating PK targets of anti-TB drugs associated with clinically relevant outcomes.

Tolerability and pharmacokinetic evaluation of inhaled dry powder hydroxychloroquine in healthy volunteers.

RATIONALE: Inhaled antimicrobials enable high local concentrations where needed and, compared to orally administration, greatly reduce the potential for systemic side effects. In SARS-CoV-2 infections, hydroxychloroquine sulphate (HCQ) administered as dry powder via inhalation could be safer than oral HCQ allowing higher and therefore more effective pulmonary concentrations without dose limiting toxic effects. OBJECTIVES: To assess the local tolerability, safety and pharmacokinetic parameters of HCQ inhalations in single ascending doses of 5, 10 and 20 mg using the Cyclops dry powder inhaler. METHODS: Twelve healthy volunteers were included in the study. Local tolerability and safety were assessed by pulmonary function tests, electrocardiogram and recording adverse events. To estimate systemic exposure, serum samples were collected before and 0.5, 2 and 3.5 h after inhalation. RESULTS AND DISCUSSION: Dry powder HCQ inhalations were well tolerated by the participants, except for transient bitter taste in all participants and minor coughing irritation. There was no significant change in QTc-interval or drop in FEV1 post inhalation. The serum HCQ concentration remained below 10 µg/L in all samples. CONCLUSION: Single doses of inhaled dry powder HCQ up to 20 mg are safe and well tolerated. Our data support that further studies with inhaled HCQ dry powder to evaluate pulmonary pharmacokinetics and efficacy are warranted.

Clinical standards for drug-susceptible pulmonary TB.

BACKGROUND: The aim of these clinical standards is to provide guidance on 'best practice´ for diagnosis, treatment and management of drug-susceptible pulmonary TB (PTB).METHODS: A panel of 54 global experts in the field of TB care, public health, microbiology, and pharmacology were identified; 46 participated in a Delphi process. A 5-point Likert scale was used to score draft standards. The final document represents the broad consensus and was approved by all 46 participants.RESULTS: Seven clinical standards were defined: Standard 1, all patients (adult or child) who have symptoms and signs compatible with PTB should undergo investigations to reach a diagnosis; Standard 2, adequate bacteriological tests should be conducted to exclude drug-resistant TB; Standard 3, an appropriate regimen recommended by WHO and national guidelines for the treatment of PTB should be identified; Standard 4, health education and counselling should be provided for each patient starting treatment; Standard 5, treatment monitoring should be conducted to assess adherence, follow patient progress, identify and manage adverse events, and detect development of resistance; Standard 6, a recommended series of patient examinations should be performed at the end of treatment; Standard 7, necessary public health actions should be conducted for each patient. We also identified priorities for future research into PTB.CONCLUSION: These consensus-based clinical standards will help to improve patient care by guiding clinicians and programme managers in planning and implementation of locally appropriate measures for optimal person-centred treatment for PTB.

How to design a study to evaluate therapeutic drug monitoring in infectious diseases?

BACKGROUND: Therapeutic drug monitoring (TDM) is a tool to personalize and optimize dosing by measuring the drug concentration and subsequently adjusting the dose to reach a target concentration or exposure. The evidence to support TDM is however often ranked as expert opinion. Limitations in study design and sample size have hampered definitive conclusions of the potential added value of TDM. OBJECTIVES: We aim to give expert opinion and discuss the main points and limitations of available data from antibiotic TDM trials and emphasize key elements for consideration in design of future clinical studies to quantify the benefits of TDM. SOURCES: The sources were peer-reviewed publications, guidelines and expert opinions from the field of TDM. CONTENT: This review focuses on key aspects of antimicrobial TDM study design: describing the rationale for a TDM study, assessing the exposure of a drug, assessing susceptibility of pathogens and selecting appropriate clinical endpoints. Moreover we provide guidance on appropriate study design. IMPLICATIONS: This is an overview of different aspects relevant for the conduct of a TDM study. We believe that this paper will help researchers and clinicians to design and conduct high-quality TDM studies.

Pharmacokinetics of rifampicin in adult TB patients and healthy volunteers: a systematic review and meta-analysis.

Objectives: The objectives of this study were to explore inter-study heterogeneity in the pharmacokinetics (PK) of orally administered rifampicin, to derive summary estimates of rifampicin PK parameters at standard dosages and to compare these with summary estimates for higher dosages. Methods: A systematic search was performed for studies of rifampicin PK published in the English language up to May 2017. Data describing the Cmax and AUC were extracted. Meta-analysis provided summary estimates for PK parameter estimates at standard rifampicin dosages. Heterogeneity was assessed by estimation of the I2 statistic and visual inspection of forest plots. Summary AUC estimates at standard and higher dosages were compared graphically and contextualized using preclinical pharmacodynamic (PD) data. Results: Substantial heterogeneity in PK parameters was evident and upheld in meta-regression. Treatment duration had a significant impact on the summary estimates for rifampicin PK parameters, with Cmax 8.98 mg/L (SEM 2.19) after a single dose and 5.79 mg/L (SEM 2.14) at steady-state dosing, and AUC 72.56 mg·h/L (SEM 2.60) and 38.73 mg·h/L (SEM 4.33) after single and steady-state dosing, respectively. Rifampicin dosages of at least 25 mg/kg are required to achieve plasma PK/PD targets defined in preclinical studies. Conclusions: Vast inter-study heterogeneity exists in rifampicin PK parameter estimates. This is not explained by the available modifying variables. The recommended dosage of rifampicin should be increased to improve efficacy. This study provides an important point of reference for understanding rifampicin PK at standard dosages as efforts to explore higher dosing strategies continue in this field.

Emerging drugs and alternative possibilities in the treatment of tuberculosis.

INTRODUCTION: Tuberculosis (TB) remains a global health problem. Drug resistance, treatment duration, complexity, and adverse drug reactions associated with anti-TB regimens are associated with treatment failure, prolonged infectiousness and relapse. With the current set of anti-TB drugs the goal to end TB has not been met. New drugs and new treatment regimens are needed to eradicate TB. AREAS COVERED: Literature was explored to select publications on drugs currently in phase II and phase III trials. These include new chemical entities, immunotherapy, established drugs in new treatment regimens and vaccines for the prophylaxis of TB. EXPERT OPINION: Well designed trials, with detailed pharmacokinetic/pharmacodynamic analysis, in which information on drug exposure and drug susceptibility of the entire anti-TB regimen is included, in combination with long-term follow-up will provide relevant data to optimize TB treatment. The new multi arm multistage trial design could be used to test new combinations of compounds, immunotherapy and therapeutic vaccines. This new approach will both reduce the number of patients exposed to inferior treatment and the financial burden. Moreover, it will speed up drug evaluation. Considering the investments involved in development of new drugs it is worthwhile to thoroughly investigate existing, non-TB drugs in new regimens.

Detection of infliximab levels and anti-infliximab antibodies: a comparison of three different assays.

BACKGROUND: Formation of antibodies to infliximab (ATI) inversely correlates with functional drug levels and clinical outcome. Comparison of drug levels and anti-drug antibody monitoring is hampered by lack of standardisation. AIM: To determine the correlation between three different assays for measuring infliximab and ATI. METHODS: Serum samples and spiked controls (total 62) were evaluated in a blinded way in infliximab and ATI assays developed by Sanquin Amsterdam, Netherlands (A), Laboratory for Pharmaceutical Biology, KU Leuven, Belgium (B) and a commercially available kit from Biomedical Diagnostics (BMD), Paris, France (C) performed by the University Medical Center Groningen (UMCG), Netherlands. RESULTS: All infliximab assays showed a linear quantitative correlation (Pearson r = 0.91 for A vs. B, 0.83 for A vs. C and 0.73 for B vs. C). Assay C detected infliximab in 11 samples (18%) not detected by A and B, including samples containing only ATI. All ATI assays showed a good linear correlation (Pearson r = 0.95 for A vs. B, 0.99 for A vs. C and 0.97 for B vs. C). Assay A detected ATI in five samples with low ATI that were not detected by assays B and C. Assay B did not detect ATI in three patient samples with low ATI according to assays A and C. CONCLUSIONS: There is a good correlation of infliximab and antibodies to infliximab measurements between these assays. Nevertheless, the Biomedical Diagnostics kit detected false positive infliximab levels in 18% of the samples.

The diagnostic value of 124I-PET in patients with differentiated thyroid cancer.

BACKGROUND: The purpose of this prospective study was to evaluate the clinical diagnostic value of iodine-124 (124I)-positron emission tomography (PET) in patients with advanced differentiated thyroid carcinoma (DTC) and to compare the 124I-PET imaging results with the 131I whole-body scan (WBS). MATERIALS AND METHODS: Twenty patients with histologically proven advanced DTC (including T4, extra-nodal tumour growth, or distant metastases) underwent diagnostic 131I-WBS, 124I-PET scan, and post-treatment 131I-WBS 4 months after ablation. The findings on the 124I-PET were compared with the findings on the diagnostic and post-therapeutic 131I-WBS and were also correlated with radiologic and/or cytological investigations. RESULTS: 124 I-PET vs diagnostic 131 I-WBS. Eleven patients showed uptake on the 124I-PET. Only 3 of these 11 patients also showed uptake on the diagnostic 131I scan, but the uptake was more clearly visible and the abnormalities were more extensive on the 124I-PET. 124 I-PET vs post-treatment 131 I-WBS. Eleven patients showed uptake on the 124I-PET, which was also visible on the post-treatment scan in nine patients; in the other two patients, no uptake was observed on the post-treatment scan and no anatomical localisation could be confirmed. Two patients showed only uptake on the post-treatment scan without uptake on the 124I-PET: in one, the uptake was confirmed by MRI, and in the other, no anatomical localisation was found. In seven patients, no uptake was observed on both the scans. CONCLUSION: 124I-PET proved to be a superior diagnostic tool as compared to low-dose diagnostic 131I scans and adequately predicted findings on subsequent high-dose post-treatment 131I scans.