Full-duplex lightwave transport systems employing phase-modulated RoF and intensity-remodulated CATV signals.

A full-duplex lightwave transport system employing phase-modulated radio-over-fiber (RoF) and intensity-remodulated CATV signals in two-way transmission is proposed and experimentally demonstrated. The transmission performances of RoF and CATV signals are investigated in bidirectional way, with the assistance of only one optical sideband and optical single sideband (SSB) schemes at the receiving sites. The experimental results show that the limitation on the optical modulation index (OMI) of the downlink RoF signal can be relaxed due to the constant intensity of phase modulation scheme. Impressive transmission performances of bit error rate (BER), carrier-to-noise ratio (CNR), composite second-order (CSO), and composite triple-beat (CTB) were obtained over two 20-km single-mode fiber (SMF) links. This proposed system reveals an outstanding one with economy and convenience to be installed.

RoF transport systems with OSNR enhanced multi-band optical carrier generator.

A combination of an economic multi-band optical carrier generator and a novel optical signal to noise ratio (OSNR) enhancement circuit is proposed and demonstrated for radio over fiber (RoF) transport systems. Different from normal RoF transport systems which a central station (CS) needs multiple dedicate wavelength laser diodes (LDs) to support various base stations (BSs), the proposed scheme can employ a single LD to provide multiple optical carriers for various BSs. To verify this scheme, 8 coherent optical carriers are firstly generated using a single LD and a local oscillator (LO). Subsequently, their OSNR values are optimized by the developed OSNR enhancement circuit. An up to 15 dB OSNR enlargement in those optical carriers is experimentally achieved. To demonstrate the practice of the proposal, a pair of those optical carriers is employed to experimentally achieve frequency up-conversion process in a RoF transport system. Clear eye diagram and error free transmission reveal that with a proper carrier selector the proposed scheme can be employed to support multiple RoF transmissions. Furthermore, this proposal also presents a high possibility to achieve 60 GHz RoF transmission using a 10 GHz LO, a LD and a low frequency external modulator.

Hybrid CATV/16-QAM OFDM in-building networks over SMF and GI-POF transport.

A hybrid CATV/16-QAM OFDM in-building network over a combination of single-mode fiber (SMF) and graded-index plastic optical fiber (GI-POF) transport is proposed and experimentally demonstrated with good qualities of service. In this system, a 1556 nm optical signal is directly transmitted along with two fiber spans (20-km SMF + 25-m GI-POF). Without using any wavelength conversion or bridge circuit between SMF and POF connection, error free transmissions with sufficient low bit error rate (BER) values are achieved for 2.5 Gbps/2.5 GHz and 5 Gbps/2.5 GHz OFDM signals; as well as good performances of carrier-to-noise ratio (CNR), composite second-order (CSO), and composite triple beat (CTB) are obtained for CATV one. This proposed network reveals an outstanding one with economy and convenience to be installed.

Integration of FTTH and GI-POF in-house networks based on injection locking and direct-detection techniques.

An integration of fiber-to-the-home (FTTH) and graded-index plastic optical fiber (GI-POF) in-house networks based on injection-locked vertical cavity surface emitting lasers (VCSELs) and direct-detection technique is proposed and experimentally demonstrated. Sufficient low bit error rate (BER) values were obtained over a combination of 20-km single-mode fiber (SMF) and 50-m GI-POF links. Signal qualities satisfy the worldwide interoperability for microwave access (WiMAX) requirement with data signals of 20 Mbps/5.8 GHz and 70 Mbps/10 GHz, respectively. Since our proposed network does not use sophisticated and expensive RF devices in premises, it reveals a prominent one with simpler and more economic advantages. Our proposed architecture is suitable for the SMF-based primary and GI-POF-based in-house networks.

Fiber optical CATV transport systems based on PM and light injection-locked DFB LD as a duplex transceiver.

A bidirectional fiber optical CATV transport system employing phase modulation (PM) scheme and frequency up-conversion technique to deal with downstream CATV signals, and using light injection-locked distributed feedback laser diode (DFB LD) as a duplex transceiver at the receiving site is proposed and experimentally demonstrated. With optimum injection wavelength and power level, a DFB LD is efficiently employed for both the transmitter and receiver operations. Such DFB LD is used to replace the functions of delay interferometer (DI) and CATV receiver, and also to be as the upstream light source. To the best of our knowledge, it is the first time to successfully utilize a DFB LD to detect the phase-modulated CATV signals. Impressive experimental results prove that our proposed systems not only can employ the PM scheme and the frequency up-conversion technique to optimize the overall performances of systems, but also can use an injection-locked DFB LD to detect the downstream phase-modulated CATV signals as well as to transmit the upstream CATV ones simultaneously.

A broadband ASE light source-based full-duplex FTTX/ROF transport system.

A full-duplex fiber-to-the-X (FTTX)/radio-over-fiber (ROF) transport system based on a broadband amplified spontaneous emission (ASE) light source is proposed and demonstrated for rural wide-spread villages. Combining the concepts of long-transmission transmission and ring topology, a long-haul single-mode fiber (SMF) trunk is sharing with multiple rural villages. Externally modulated baseband (BB) (1.25 Gbps) and radio-frequency (RF) (622 Mbps/10 GHz) signals are successfully transmitted simultaneously. Good bit error rate (BER) performance was achieved to demonstrate the practice of providing wire/wireless connections for long-haul wide-spread rural villages. Since our proposed system uses only a broadband ASE light source to achieve multi-wavelengths transmissions, it also reveals an outstanding one with simpler and more economic advantages.