Ga-Pt supported catalytically active liquid metal solutions (SCALMS) prepared by ultrasonication - influence of synthesis conditions on n-heptane dehydrogenation performance.

Supported catalytically active liquid metal solution (SCALMS) materials represent a recently developed class of heterogeneous catalysts, where the catalytic reaction takes place at the highly dynamic interface of supported liquid alloys. Ga nuggets were dispersed into nano-droplets in propan-2-ol using ultrasonication followed by the addition of Pt in a galvanic displacement reaction - either directly into the Ga/propan-2-ol dispersion (in situ) or consecutively onto the supported Ga droplets (ex situ). The in situ galvanic displacement reaction between Ga and Pt was studied in three different reaction media, namely propan-2-ol, water, and 20 vol% water containing propan-2-ol. TEM investigations reveal that the Ga-Pt reaction in propan-2-ol resulted in the formation of Pt aggregates on top of Ga nano-droplets. In the water/propan-2-ol mixture, the desired incorporation of Pt into the Ga matrix was achieved. The ex situ prepared Ga-Pt SCALMS were tested in n-heptane dehydrogenation. Ga-Pt SCALMS synthesized in pure alcoholic solution showed equal dehydrogenation and cracking activity. Ga-Pt SCALMS prepared in pure water, in contrast, showed mainly cracking activity due to oxidation of Ga droplets. The Ga-Pt SCALMS material prepared in water/propan-2-ol resulted in high activity, n-heptene selectivity of 63%, and only low cracking tendency. This can be attributed to the supported liquid Ga-Pt alloy where Pt atoms are present in the liquid Ga matrix at the highly dynamic catalytic interface.

Effect of Multifactor on the Stability of Glucose Solution Emulsified Heavy Fuel Oil.

Water emulsified heavy fuel oil (HFO) has been a promising alternative fuel for reducing oil consumption and preventing environmental pollution. However, the intrinsic challenges such as fuel formula, emulsion stability, and preparation process normally limit its further applications in energy-saving and emission reduction applications. In this study, the glucose obtained from biomass was added to a dispersed-phase aqueous solution of water emulsified HFO to prepare a novel alternative emulsified fuel. First, based on the preliminary experimental design, the effects of glucose and surfactant on the stability of the HFO emulsion were systematically evaluated through the appearance of emulsion separation, droplet size distribution, and rheological characteristics. It indicated that the surfactant ratio, hydrophilic-lipophilic balance value, solution ratio, and glucose/water ratio had significant impacts on emulsion stability. Subsequently, the optimum range of influencing factors of emulsion stability was determined by a single factor experiment and determined by the response surface methodology based on the Box-Behnken design; the optimal values of the above factors were 2.439 v/v%, 5.807, 26.462 v/v%, and 35.729%, respectively. Under these conditions, an optimal glucose solution emulsified HFO with a uniform brown color and long-term stability was obtained, making the unseparated emulsion ratio reach 98% (lasting for 7 days at 85 °C). Meanwhile, it emerged that the influence of multifactor on emulsion stability was not a simple linear correlation, and there were significant interactions between the solution ratio and the surfactant ratio, as well as between the glucose/water ratio and the surfactant ratio.

From Meso to Macro: Controlling Hierarchical Porosity in Supraparticle Powders.

A drying droplet containing colloidal particles can consolidate into a spherical assembly called a supraparticle. Such supraparticles are inherently porous due to the spaces between the constituent primary particles. Here, the emergent, hierarchical porosity in spray-dried supraparticles is tailored via three distinct strategies acting at different length scales. First, mesopores (<10 nm) are introduced via the primary particles. Second, the interstitial pores are tuned from the meso- (35 nm) to the macro scale (250 nm) by controlling the primary particle size. Third, defined macropores (>100 nm) are introduced via templating polymer particles, which can be selectively removed by calcination. Combining all three strategies creates hierarchical supraparticles with fully tailored pore size distributions. Moreover, another level of the hierarchy is added by fabricating supra-supraparticles, using the supraparticles themselves as building blocks, which provide additional pores with micrometer dimensions. The interconnectivity of the pore networks within all supraparticle types is investigated via detailed textural and tomographic analysis. This work provides a versatile toolbox for designing porous materials with precisely tunable, hierarchical porosity from the meso- (3 nm) to the macroscale (≈10 µm) that can be utilized for applications in catalysis, chromatography, or adsorption.

Diffusion of gold nanoparticles in porous silica monoliths determined by dynamic light scattering.

HYPOTHESIS: The applicability of the dynamic light scattering method for the determination of particle diffusivity under confinement without applying refractive index matching was not adequately explored so far. The confinement effect on particle diffusion in a porous material which is relevant for particle chromatography has also not yet been fully characterized. EXPERIMENTS: Dynamic light scattering experiments were performed for unimodal dispersions of 11-mercaptoundecanoic acid-capped gold nanoparticles. Diffusion coefficients of gold nanoparticles in porous silica monoliths were determined without limiting refractive index matching fluids. Comparative experiments were also performed with the same nanoparticles and porous silica monolith but applying refractive index matching. FINDINGS: Two distinct diffusivities could be determined inside the porous silica monolith, both smaller than that in free media, showing a slowing-down of the diffusion processes of nanoparticles under confinement. While the larger diffusivity can be related to the slightly slowed-down diffusion of particles in the bulk of the pores and in the necks connecting individual pores, the smaller diffusivity might be related to the diffusion of particles near the pore walls. It shows that the dynamic light scattering method with a heterodyne detection scheme can be used as a reliable and competitive tool for determining particle diffusion under confinement.

Influence of Surfactant-Mediated Interparticle Contacts on the Mechanical Stability of Supraparticles.

Colloidal supraparticles are micron-scale spherical assemblies of uniform primary particles, which exhibit emergent properties of a colloidal crystal, yet exist as a dispersible powder. A prerequisite to utilize these emergent functionalities is that the supraparticles maintain their mechanical integrity upon the mechanical impacts that are likely to occur during processing. Understanding how the internal structure relates to the resultant mechanical properties of a supraparticle is therefore of general interest. Here, we take the example of supraparticles templated from water/fluorinated oil emulsions in droplet-based microfluidics and explore the effect of surfactants on their mechanical properties. Stable emulsions can be generated by nonionic block copolymers consisting of a hydrophilic and fluorophilic block and anionic fluorosurfactants widely available under the brand name Krytox. The supraparticles formed in the presence of both types of surfactants appear structurally similar, but differ greatly in their mechanical properties. While the nonionic surfactant induces superior mechanical stability and ductile fracture behavior, the anionic Krytox surfactant leads to weak supraparticles with brittle fracture. We complement this macroscopic picture with Brillouin light spectroscopy that is very sensitive to the interparticle contacts for subnanometer-thick adsorbed layers atop of the nanoparticle. While the anionic Krytox does not significantly affect the interparticle bonds, the amphiphilic nonionic surfactant drastically strengthens these bonds to the point that individual particle vibrations are not resolved in the experimental spectrum. Our results demonstrate that seemingly subtle changes in the physicochemical properties of supraparticles can drastically impact the resultant mechanical properties.