Post-contrast CT liver attenuation alone is superior to the liver-spleen difference for identifying moderate hepatic steatosis.

OBJECTIVE: To assess the diagnostic performance of post-contrast CT for predicting moderate hepatic steatosis in an older adult cohort undergoing a uniform CT protocol, utilizing hepatic and splenic attenuation values. MATERIALS AND METHODS: A total of 1676 adults (mean age, 68.4 ± 10.2 years; 1045M/631F) underwent a CT urothelial protocol that included unenhanced, portal venous, and 10-min delayed phases through the liver and spleen. Automated hepatosplenic segmentation for attenuation values (in HU) was performed using a validated deep-learning tool. Unenhanced liver attenuation < 40.0 HU, corresponding to > 15% MRI-based proton density fat, served as the reference standard for moderate steatosis. RESULTS: The prevalence of moderate or severe steatosis was 12.9% (216/1676). The diagnostic performance of portal venous liver HU in predicting moderate hepatic steatosis (AUROC = 0.943) was significantly better than the liver-spleen HU difference (AUROC = 0.814) (p < 0.001). Portal venous phase liver thresholds of 80 and 90 HU had a sensitivity/specificity for moderate steatosis of 85.6%/89.6%, and 94.9%/74.7%, respectively, whereas a liver-spleen difference of -40 HU and -10 HU had a sensitivity/specificity of 43.5%/90.0% and 92.1%/52.5%, respectively. Furthermore, livers with moderate-severe steatosis demonstrated significantly less post-contrast enhancement (mean, 35.7 HU vs 47.3 HU; p < 0.001). CONCLUSION: Moderate steatosis can be reliably diagnosed on standard portal venous phase CT using liver attenuation values alone. Consideration of splenic attenuation appears to add little value. Moderate steatosis not only has intrinsically lower pre-contrast liver attenuation values (< 40 HU), but also enhances less, typically resulting in post-contrast liver attenuation values of 80 HU or less. CLINICAL RELEVANCE STATEMENT: Moderate steatosis can be reliably diagnosed on post-contrast CT using liver attenuation values alone. Livers with at least moderate steatosis enhance less than those with mild or no steatosis, which combines with the lower intrinsic attenuation to improve detection. KEY POINTS: The liver-spleen attenuation difference is frequently utilized in routine practice but appears to have performance limitations. The liver-spleen attenuation difference is less effective than liver attenuation for moderate steatosis. Moderate and severe steatosis can be identified on standard portal venous phase CT using liver attenuation alone.

Towards long-tailed, multi-label disease classification from chest X-ray: Overview of the CXR-LT challenge.

Many real-world image recognition problems, such as diagnostic medical imaging exams, are "long-tailed" - there are a few common findings followed by many more relatively rare conditions. In chest radiography, diagnosis is both a long-tailed and multi-label problem, as patients often present with multiple findings simultaneously. While researchers have begun to study the problem of long-tailed learning in medical image recognition, few have studied the interaction of label imbalance and label co-occurrence posed by long-tailed, multi-label disease classification. To engage with the research community on this emerging topic, we conducted an open challenge, CXR-LT, on long-tailed, multi-label thorax disease classification from chest X-rays (CXRs). We publicly release a large-scale benchmark dataset of over 350,000 CXRs, each labeled with at least one of 26 clinical findings following a long-tailed distribution. We synthesize common themes of top-performing solutions, providing practical recommendations for long-tailed, multi-label medical image classification. Finally, we use these insights to propose a path forward involving vision-language foundation models for few- and zero-shot disease classification.

AI and machine learning in medical imaging: key points from development to translation.

Innovation in medical imaging artificial intelligence (AI)/machine learning (ML) demands extensive data collection, algorithmic advancements, and rigorous performance assessments encompassing aspects such as generalizability, uncertainty, bias, fairness, trustworthiness, and interpretability. Achieving widespread integration of AI/ML algorithms into diverse clinical tasks will demand a steadfast commitment to overcoming issues in model design, development, and performance assessment. The complexities of AI/ML clinical translation present substantial challenges, requiring engagement with relevant stakeholders, assessment of cost-effectiveness for user and patient benefit, timely dissemination of information relevant to robust functioning throughout the AI/ML lifecycle, consideration of regulatory compliance, and feedback loops for real-world performance evidence. This commentary addresses several hurdles for the development and adoption of AI/ML technologies in medical imaging. Comprehensive attention to these underlying and often subtle factors is critical not only for tackling the challenges but also for exploring novel opportunities for the advancement of AI in radiology.

Adjusting for the effect of IV contrast on automated CT body composition measures during the portal venous phase.

OBJECTIVE: Fully-automated CT-based algorithms for quantifying numerous biomarkers have been validated for unenhanced abdominal scans. There is great interest in optimizing the documentation and reporting of biophysical measures present on all CT scans for the purposes of opportunistic screening and risk profiling. The purpose of this study was to determine and adjust the effect of intravenous (IV) contrast on these automated body composition measures at routine portal venous phase post-contrast imaging. METHODS: Final study cohort consisted of 1,612 older adults (mean age, 68.0 years; 594 women) all imaged utilizing a uniform CT urothelial protocol consisting of pre-contrast, portal venous, and delayed excretory phases. Fully-automated CT-based algorithms for quantifying numerous biomarkers, including muscle and fat area and density, bone mineral density, and solid organ volume were applied to pre-contrast and portal venous phases. The effect of IV contrast upon these body composition measures was analyzed. Regression analyses, including square of the Pearson correlation coefficient (r2), were performed for each comparison. RESULTS: We found that simple, linear relationships can be derived to determine non-contrast equivalent values from the post-contrast CT biomeasures. Excellent positive linear correlation (r2 = 0.91-0.99) between pre- and post-contrast values was observed for all automated soft tissue measures, whereas moderate positive linear correlation was observed for bone attenuation (r2 = 0.58-0.76). In general, the area- and volume-based measurement require less adjustment than attenuation-based measures, as expected. CONCLUSION: Fully-automated quantitative CT-biomarker measures at portal venous phase abdominal CT can be adjusted to a non-contrast equivalent using simple, linear relationships.

Enhanced muscle and fat segmentation for CT-based body composition analysis: a comparative study.

PURPOSE: Body composition measurements from routine abdominal CT can yield personalized risk assessments for asymptomatic and diseased patients. In particular, attenuation and volume measures of muscle and fat are associated with important clinical outcomes, such as cardiovascular events, fractures, and death. This study evaluates the reliability of an Internal tool for the segmentation of muscle and fat (subcutaneous and visceral) as compared to the well-established public TotalSegmentator tool. METHODS: We assessed the tools across 900 CT series from the publicly available SAROS dataset, focusing on muscle, subcutaneous fat, and visceral fat. The Dice score was employed to assess accuracy in subcutaneous fat and muscle segmentation. Due to the lack of ground truth segmentations for visceral fat, Cohen's Kappa was utilized to assess segmentation agreement between the tools. RESULTS: Our Internal tool achieved a 3% higher Dice (83.8 vs. 80.8) for subcutaneous fat and a 5% improvement (87.6 vs. 83.2) for muscle segmentation, respectively. A Wilcoxon signed-rank test revealed that our results were statistically different with p < 0.01. For visceral fat, the Cohen's Kappa score of 0.856 indicated near-perfect agreement between the two tools. Our internal tool also showed very strong correlations for muscle volume (R 2 =0.99), muscle attenuation (R 2 =0.93), and subcutaneous fat volume (R 2 =0.99) with a moderate correlation for subcutaneous fat attenuation (R 2 =0.45). CONCLUSION: Our findings indicated that our Internal tool outperformed TotalSegmentator in measuring subcutaneous fat and muscle. The high Cohen's Kappa score for visceral fat suggests a reliable level of agreement between the two tools. These results demonstrate the potential of our tool in advancing the accuracy of body composition analysis.

Self and Mixed Supervision to Improve Training Labels for Multi-Class Medical Image Segmentation.

Accurate training labels are a key component for multi-class medical image segmentation. Their annotation is costly and time-consuming because it requires domain expertise. In our previous work, a dual-branch network was developed to segment single-class edematous adipose tissue. Its inputs include a few strong labels from manual annotation and many inaccurate weak labels from existing segmentation methods. The dual-branch network consists of a shared encoder and two decoders to process weak and strong labels. Self-supervision iteratively updates weak labels during the training process. This work aims to follow this strategy and automatically improve training labels for multi-class image segmentation. Instead of using weak and strong labels to only train the network once in the previous work, transfer learning is used to train the network and improve weak labels sequentially. The dual-branch network is first trained by weak labels alone to initialize model parameters. After the network is stabilized, the shared encoder is frozen, and strong and weak decoders are fine-tuned by strong and weak labels together. The accuracy of weak labels is iteratively improved in the fine-tuning process. The proposed method was applied to a three-class segmentation of muscle, subcutaneous and visceral adipose tissue on abdominal CT scans. Validation results on 11 patients showed that the accuracy of training labels was statistically significantly improved, with the Dice similarity coefficient of muscle, subcutaneous and visceral adipose tissue increased from 74.2% to 91.5%, 91.2% to 95.6%, and 77.6% to 88.5%, respectively (p<0.05). In comparison with our earlier method, the label accuracy was also significantly improved (p<0.05). These experimental results suggested that the combination of the dual-branch network and transfer learning is an efficient means to improve training labels for multi-class segmentation.

Segmentation of mediastinal lymph nodes in CT with anatomical priors.

PURPOSE: Lymph nodes (LNs) in the chest have a tendency to enlarge due to various pathologies, such as lung cancer or pneumonia. Clinicians routinely measure nodal size to monitor disease progression, confirm metastatic cancer, and assess treatment response. However, variations in their shapes and appearances make it cumbersome to identify LNs, which reside outside of most organs. METHODS: We propose to segment LNs in the mediastinum by leveraging the anatomical priors of 28 different structures (e.g., lung, trachea etc.) generated by the public TotalSegmentator tool. The CT volumes from 89 patients available in the public NIH CT Lymph Node dataset were used to train three 3D off-the-shelf nnUNet models to segment LNs. The public St. Olavs dataset containing 15 patients (out-of-training-distribution) was used to evaluate the segmentation performance. RESULTS: For LNs with short axis diameter ≥ 8 mm, the 3D cascade nnUNet model obtained the highest Dice score of 67.9 ± 23.4 and lowest Hausdorff distance error of 22.8 ± 20.2. For LNs of all sizes, the Dice score was 58.7 ± 21.3 and this represented a ≥ 10% improvement over a recently published approach evaluated on the same test dataset. CONCLUSION: To our knowledge, we are the first to harness 28 distinct anatomical priors to segment mediastinal LNs, and our work can be extended to other nodal zones in the body. The proposed method has the potential for improved patient outcomes through the identification of enlarged nodes in initial staging CT scans.

Artificial intelligence in medicine: mitigating risks and maximizing benefits via quality assurance, quality control, and acceptance testing.

The adoption of artificial intelligence (AI) tools in medicine poses challenges to existing clinical workflows. This commentary discusses the necessity of context-specific quality assurance (QA), emphasizing the need for robust QA measures with quality control (QC) procedures that encompass (1) acceptance testing (AT) before clinical use, (2) continuous QC monitoring, and (3) adequate user training. The discussion also covers essential components of AT and QA, illustrated with real-world examples. We also highlight what we see as the shared responsibility of manufacturers or vendors, regulators, healthcare systems, medical physicists, and clinicians to enact appropriate testing and oversight to ensure a safe and equitable transformation of medicine through AI.

Weakly Supervised Detection of Pheochromocytomas and Paragangliomas in CT.

Pheochromocytomas and Paragangliomas (PPGLs) are rare adrenal and extra-adrenal tumors which have the potential to metastasize. For the management of patients with PPGLs, CT is the preferred modality of choice for precise localization and estimation of their progression. However, due to the myriad variations in size, morphology, and appearance of the tumors in different anatomical regions, radiologists are posed with the challenge of accurate detection of PPGLs. Since clinicians also need to routinely measure their size and track their changes over time across patient visits, manual demarcation of PPGLs is quite a time-consuming and cumbersome process. To ameliorate the manual effort spent for this task, we propose an automated method to detect PPGLs in CT studies via a proxy segmentation task. As only weak annotations for PPGLs in the form of prospectively marked 2D bounding boxes on an axial slice were available, we extended these 2D boxes into weak 3D annotations and trained a 3D full-resolution nnUNet model to directly segment PPGLs. We evaluated our approach on a dataset consisting of chest-abdomen-pelvis CTs of 255 patients with confirmed PPGLs. We obtained a precision of 70% and sensitivity of 64.1% with our proposed approach when tested on 53 CT studies. Our findings highlight the promising nature of detecting PPGLs via segmentation, and furthers the state-of-the-art in this exciting yet challenging area of rare cancer management.

Automated Plaque Detection and Agatston Score Estimation on Non-Contrast CT Scans: A Multicenter Study.

Coronary artery calcification (CAC) is a strong and independent predictor of cardiovascular disease (CVD). However, manual assessment of CAC often requires radiological expertise, time, and invasive imaging techniques. The purpose of this multicenter study is to validate an automated cardiac plaque detection model using a 3D multiclass nnU-Net for gated and non-gated non-contrast chest CT volumes. CT scans were performed at three tertiary care hospitals and collected as three datasets, respectively. Heart, aorta, and lung segmentations were determined using TotalSegmentator, while plaques in the coronary arteries and heart valves were manually labeled for 801 volumes. In this work we demonstrate how the nnU-Net semantic segmentation pipeline may be adapted to detect plaques in the coronary arteries and valves. With a linear correction, nnU-Net deep learning methods may also accurately estimate Agatston scores on chest non-contrast CT scans. Compared to manual Agatson scoring, automated Agatston scoring indicated a slope of the linear regression of 0.841 with an intercept of +16 HU (R2 = 0.97). These results are an improvement over previous work assessing automated Agatston score computation in non-gated CT scans.

Automated Classification of Body MRI Sequence Type Using Convolutional Neural Networks.

Multi-parametric MRI of the body is routinely acquired for the identification of abnormalities and diagnosis of diseases. However, a standard naming convention for the MRI protocols and associated sequences does not exist due to wide variations in imaging practice at institutions and myriad MRI scanners from various manufacturers being used for imaging. The intensity distributions of MRI sequences differ widely as a result, and there also exists information conflicts related to the sequence type in the DICOM headers. At present, clinician oversight is necessary to ensure that the correct sequence is being read and used for diagnosis. This poses a challenge when specific series need to be considered for building a cohort for a large clinical study or for developing AI algorithms. In order to reduce clinician oversight and ensure the validity of the DICOM headers, we propose an automated method to classify the 3D MRI sequence acquired at the levels of the chest, abdomen, and pelvis. In our pilot work, our 3D DenseNet-121 model achieved an F1 score of 99.5% at differentiating 5 common MRI sequences obtained by three Siemens scanners (Aera, Verio, Biograph mMR). To the best of our knowledge, we are the first to develop an automated method for the 3D classification of MRI sequences in the chest, abdomen, and pelvis, and our work has outperformed the previous state-of-the-art MRI series classifiers.

Weakly-Supervised Detection of Bone Lesions in CT.

The skeletal region is one of the common sites of metastatic spread of cancer in the breast and prostate. CT is routinely used to measure the size of lesions in the bones. However, they can be difficult to spot due to the wide variations in their sizes, shapes, and appearances. Precise localization of such lesions would enable reliable tracking of interval changes (growth, shrinkage, or unchanged status). To that end, an automated technique to detect bone lesions is highly desirable. In this pilot work, we developed a pipeline to detect bone lesions (lytic, blastic, and mixed) in CT volumes via a proxy segmentation task. First, we used the bone lesions that were prospectively marked by radiologists in a few 2D slices of CT volumes and converted them into weak 3D segmentation masks. Then, we trained a 3D full-resolution nnUNet model using these weak 3D annotations to segment the lesions and thereby detected them. Our automated method detected bone lesions in CT with a precision of 96.7% and recall of 47.3% despite the use of incomplete and partial training data. To the best of our knowledge, we are the first to attempt the direct detection of bone lesions in CT via a proxy segmentation task.

Detection of abdominopelvic lymph nodes in multi-parametric MRI.

Reliable localization of lymph nodes (LNs) in multi-parametric MRI (mpMRI) studies plays a major role in the assessment of lymphadenopathy and staging of metastatic disease. Radiologists routinely measure the nodal size in order to distinguish benign from malignant nodes, which require subsequent cancer staging. However, identification of lymph nodes is a cumbersome task due to their myriad appearances in mpMRI studies. Multiple sequences are acquired in mpMRI studies, including T2 fat suppressed (T2FS) and diffusion weighted imaging (DWI) sequences among others; consequently, the sizing of LNs is rendered challenging due to the variety of signal intensities in these sequences. Furthermore, radiologists can miss potentially metastatic LNs during a busy clinical day. To lighten these imaging and workflow challenges, we propose a computer-aided detection (CAD) pipeline to detect both benign and malignant LNs in the body for their subsequent measurement. We employed the recently proposed Dynamic Head (DyHead) neural network to detect LNs in mpMRI studies that were acquired using a variety of scanners and exam protocols. The T2FS and DWI series were co-registered, and a selective augmentation technique called Intra-Label LISA (ILL) was used to blend the two volumes with the interpolation factor drawn from a Beta distribution. In this way, ILL diversified the samples that the model encountered during the training phase, while the requirement for both sequences to be present at test time was nullified. Our results showed a mean average precision (mAP) of 53.5% and a sensitivity of ∼78% with ILL at 4 FP/vol. This corresponded to an improvement of ≥10% in mAP and ≥12% in sensitivity at 4FP (p ¡ 0.05) respectively over current LN detection approaches evaluated on the same dataset. We also established the out-of-distribution robustness of the DyHead model by training it on data acquired by a Siemens Aera scanner and testing it on data from the Siemens Verio, Siemens Biograph mMR, and Philips Achieva scanners. Our pilot work represents an important first step towards automated detection, segmentation, and classification of lymph nodes in mpMRI.

Fully automated CT imaging biomarkers for opportunistic prediction of future hip fractures.

OBJECTIVE: Assess automated CT imaging biomarkers in patients who went on to hip fracture, compared with controls. METHODS: In this retrospective case-control study, 6926 total patients underwent initial abdominal CT over a 20-year interval at one institution. A total of 1308 patients (mean age at initial CT, 70.5 ± 12.0 years; 64.4% female) went on to hip fracture (mean time to fracture, 5.2 years); 5618 were controls (mean age 70.3 ± 12.0 years; 61.2% female; mean follow-up interval 7.6 years). Validated fully automated quantitative CT algorithms for trabecular bone attenuation (at L1), skeletal muscle attenuation (at L3), and subcutaneous adipose tissue area (SAT) (at L3) were applied to all scans. Hazard ratios (HRs) comparing highest to lowest risk quartiles and receiver operating characteristic (ROC) curve analysis including area under the curve (AUC) were derived. RESULTS: Hip fracture HRs (95% CI) were 3.18 (2.69-3.76) for low trabecular bone HU, 1.50 (1.28-1.75) for low muscle HU, and 2.18 (1.86-2.56) for low SAT. 10-year ROC AUC values for predicting hip fracture were 0.702, 0.603, and 0.603 for these CT-based biomarkers, respectively. Multivariate combinations of these biomarkers further improved predictive value; the 10-year ROC AUC combining bone/muscle/SAT was 0.733, while combining muscle/SAT was 0.686. CONCLUSION: Opportunistic use of automated CT bone, muscle, and fat measures can identify patients at higher risk for future hip fracture, regardless of the indication for CT imaging. ADVANCES IN KNOWLEDGE: CT data can be leveraged opportunistically for further patient evaluation, with early intervention as needed. These novel AI tools analyse CT data to determine a patient's future hip fracture risk.

Enhanced Muscle and Fat Segmentation for CT-Based Body Composition Analysis: A Comparative Study.

Purpose: Body composition measurements from routine abdominal CT can yield personalized risk assessments for asymptomatic and diseased patients. In particular, attenuation and volume measures of muscle and fat are associated with important clinical outcomes, such as cardiovascular events, fractures, and death. This study evaluates the reliability of an Internal tool for the segmentation of muscle and fat (subcutaneous and visceral) as compared to the well-established public TotalSegmentator tool. Methods: We assessed the tools across 900 CT series from the publicly available SAROS dataset, focusing on muscle, subcutaneous fat, and visceral fat. The Dice score was employed to assess accuracy in subcutaneous fat and muscle segmentation. Due to the lack of ground truth segmentations for visceral fat, Cohen's Kappa was utilized to assess segmentation agreement between the tools. Results: Our Internal tool achieved a 3% higher Dice (83.8 vs. 80.8) for subcutaneous fat and a 5% improvement (87.6 vs. 83.2) for muscle segmentation respectively. A Wilcoxon signed-rank test revealed that our results were statistically different with p < 0.01. For visceral fat, the Cohen's kappa score of 0.856 indicated near-perfect agreement between the two tools. Our internal tool also showed very strong correlations for muscle volume (R2=0.99), muscle attenuation (R2=0.93), and subcutaneous fat volume (R2=0.99) with a moderate correlation for subcutaneous fat attenuation (R2=0.45). Conclusion: Our findings indicated that our Internal tool outperformed TotalSegmentator in measuring subcutaneous fat and muscle. The high Cohen's Kappa score for visceral fat suggests a reliable level of agreement between the two tools. These results demonstrate the potential of our tool in advancing the accuracy of body composition analysis.

Hidden Flaws Behind Expert-Level Accuracy of Multimodal GPT-4 Vision in Medicine.

Recent studies indicate that Generative Pre-trained Transformer 4 with Vision (GPT-4V) outperforms human physicians in medical challenge tasks. However, these evaluations primarily focused on the accuracy of multi-choice questions alone. Our study extends the current scope by conducting a comprehensive analysis of GPT-4V's rationales of image comprehension, recall of medical knowledge, and step-by-step multimodal reasoning when solving New England Journal of Medicine (NEJM) Image Challenges - an imaging quiz designed to test the knowledge and diagnostic capabilities of medical professionals. Evaluation results confirmed that GPT-4V performs comparatively to human physicians regarding multi-choice accuracy (81.6% vs. 77.8%). GPT-4V also performs well in cases where physicians incorrectly answer, with over 78% accuracy. However, we discovered that GPT-4V frequently presents flawed rationales in cases where it makes the correct final choices (35.5%), most prominent in image comprehension (27.2%). Regardless of GPT-4V's high accuracy in multi-choice questions, our findings emphasize the necessity for further in-depth evaluations of its rationales before integrating such multimodal AI models into clinical workflows.

Improved subcutaneous edema segmentation on abdominal CT using a generated adipose tissue density prior.

PURPOSE: Edema, or swelling, is a common symptom of kidney, heart, and liver disease. Volumetric edema measurement is potentially clinically useful. Edema can occur in various tissues. This work focuses on segmentation and volume measurement of one common site, subcutaneous adipose tissue. METHODS: The density distributions of edema and subcutaneous adipose tissue are represented as a two-class Gaussian mixture model (GMM). In previous work, edema regions were segmented by selecting voxels with density values within the edema density distribution. This work improves upon the prior work by generating an adipose tissue mask without edema through a conditional generative adversarial network. The density distribution of the generated mask was imported into a Chan-Vese level set framework. Edema and subcutaneous adipose tissue are separated by iteratively updating their respective density distributions. RESULTS: Validation results on 25 patients with edema showed that the segmentation accuracy significantly improved. Compared to GMM, the average Dice Similarity Coefficient increased from 56.0 to 61.7% ([Formula: see text]) and the relative volume difference decreased from 36.5 to 30.2% ([Formula: see text]). CONCLUSION: The generated adipose tissue density prior improved edema segmentation accuracy. Accurate edema volume measurement may prove clinically useful.

AI-generated CT body composition biomarkers associated with increased mortality risk in socioeconomically disadvantaged individuals.

PURPOSE: To evaluate the relationship between socioeconomic disadvantage using national area deprivation index (ADI) and CT-based body composition measures derived from fully automated artificial intelligence (AI) tools to identify body composition measures associated with increased risk for all-cause mortality and adverse cardiovascular events. METHODS: Fully automated AI body composition tools quantifying abdominal aortic calcium, abdominal fat (visceral [VAT], visceral-to-subcutaneous ratio [VSR]), and muscle attenuation (muscle HU) were applied to non-contrast CT examinations in adults undergoing screening CT colonography (CTC). Patients were partitioned into 5 socioeconomic groups based on the national ADI rank at the census block group level. Pearson correlation analysis was performed to determine the association between national ADI and body composition measures. One-way analysis of variance was used to compare means across groups. Odds ratios (ORs) were generated using high-risk, high specificity (90% specificity) body composition thresholds with the most disadvantaged groups being compared to the least disadvantaged group (ADI < 20). RESULTS: 7785 asymptomatic adults (mean age, 57 years; 4361:3424 F:M) underwent screening CTC from April 2004-December 2016. ADI rank data were available in 7644 patients. Median ADI was 31 (IQR 22-43). Aortic calcium, VAT, and VSR had positive correlation with ADI and muscle attenuation had a negative correlation with ADI (all p < .001). Compared with the least disadvantaged group, mean differences for the most disadvantaged group (ADI > 80) were: Aortic calcium (Agatston) = 567, VAT = 27 cm2, VSR = 0.1, and muscle HU = -6 HU (all p < .05). Compared with the least disadvantaged group, the most disadvantaged group had significantly higher odds of having high-risk body composition measures: Aortic calcium OR = 3.8, VAT OR = 2.5, VSR OR = 2.0, and muscle HU OR = 3.1(all p < .001). CONCLUSION: Fully automated CT body composition tools show that socioeconomic disadvantage is associated with high-risk body composition measures and can be used to identify individuals at increased risk for all-cause mortality and adverse cardiovascular events.

Segmentation of pelvic structures in T2 MRI via MR-to-CT synthesis.

Segmentation of multiple pelvic structures in MRI volumes is a prerequisite for many clinical applications, such as sarcopenia assessment, bone density measurement, and muscle-to-fat volume ratio estimation. While many CT-specific datasets and automated CT-based multi-structure pelvis segmentation methods exist, there are few MRI-specific multi-structure segmentation methods in literature. In this pilot work, we propose a lightweight and annotation-free pipeline to synthetically translate T2 MRI volumes of the pelvis to CT, and subsequently leverage an existing CT-only tool called TotalSegmentator to segment 8 pelvic structures in the generated CT volumes. The predicted masks were then mapped back to the original MR volumes as segmentation masks. We compared the predicted masks against the expert annotations of the public TCGA-UCEC dataset and an internal dataset. Experiments demonstrated that the proposed pipeline achieved Dice measures ≥65% for 8 pelvic structures in T2 MRI. The proposed pipeline is an alternative method to obtain multi-organ and structure segmentations without being encumbered by time-consuming manual annotations. By exploiting the significant research progress in CTs, it is possible to extend the proposed pipeline to other MRI sequences in principle. Our research bridges the chasm between the current CT-based multi-structure segmentation and MRI-based segmentation. The manually segmented structures in the TCGA-UCEC dataset are publicly available.