RESUMO
Electrochemical reduction of CO2 is an important way to achieve carbon neutrality, and much effort has been devoted to the design of active sites. Apart from elevating the intrinsic activity, expanding the functionality of active sites may also boost catalytic performance. Here we designed "negatively charged Ag (nc-Ag)" active sites featuring both the intrinsic activity and the capability of regulating microenvironment, through modifying Ag nanoparticles with atomically dispersed Sn species. Different from conventional active sites (which only mediate the surface processes by bonding with the intermediates), the nc-Ag sites could also manipulate environmental species. Therefore, the sites could not only activate CO2, but also regulate interfacial H2O and CO2, as confirmed by operando spectroscopies. The catalyst delivers a high current density with a CO faradaic efficiency of 97 %. Our work here opens up new opportunities for the design of multifunctional electrocatalytic active sites.
RESUMO
Electrochemical CO2 reduction reaction (CO2RR) provides a promising route to converting CO2 into value-added chemicals and to neutralizing the greenhouse gas emission. For the industrial application of CO2RR, high-performance electrocatalysts featuring high activities and selectivities are essential. It has been demonstrated that customizing the catalyst surface/interface structures allows for high-precision control over the microenvironment for catalysis as well as the adsorption/desorption behaviors of key reaction intermediates in CO2RR, thereby elevating the activity, selectivity and stability of the electrocatalysts. In this paper, we review the progress in customizing the surface/interface structures for CO2RR electrocatalysts (including atomic-site catalysts, metal catalysts, and metal/oxide catalysts). From the perspectives of coordination engineering, atomic interface design, surface modification, and hetero-interface construction, we delineate the resulting specific alterations in surface/interface structures, and their effect on the CO2RR process. At the end of this review, we present a brief discussion and outlook on the current challenges and future directions for achieving high-efficiency CO2RR via surface/interface engineering.
RESUMO
Continuous and effective hydrogen evolution under high current densities remains a challenge for water electrolysis owing to the rapid performance degradation under continuous large-current operation. In this study, theoretical calculations, operando Raman spectroscopy, and CO stripping experiments confirm that Ru nanocrystals have a high resistance against deactivation because of the synergistic adsorption of OH intermediates (OHad) on the Ru and single atoms. Based on this conceptual model, we design the Ni single atoms modifying ultra-small Ru nanoparticle with defect carbon bridging structure (UP-RuNiSAs/C) via a unique unipolar pulse electrodeposition (UPED) strategy. As a result, the UP-RuNiSAs/C is found capable of running steadily for 100 h at 3 A cm-2, and shows a low overpotential of 9 mV at a current density of 10 mA cm-2 under alkaline conditions. Moreover, the UP-RuNiSAs/C allows an anion exchange membrane (AEM) electrolyzer to operate stably at 1.95 Vcell for 250 h at 1 A cm-2.
RESUMO
Photocatalytic organic functionalization reactions represent a green, cost-effective, and sustainable synthesis route for value-added chemicals. However, heterogeneous photocatalysis is inefficient in directly activating ammonia molecules for the production of high-value-added nitrogenous organic products when compared with oxygen activation in the formation of related oxygenated compounds. In this study, we report the heterogeneous photosynthesis of benzonitriles by the ammoxidation of benzyl alcohols (99 % conversion, 93 % selectivity) promoted using BiOBr nanosheets with surface vacancy associates. In contrast, the main reaction of catalysts with other types of vacancy sites is the oxidation of benzyl alcohol to benzaldehyde or benzoic acid. Experimental measurements and theoretical calculations have demonstrated a specificity of vacancy type with respect to product selectivity, which arises from the adsorption and activation of NH3 and O2 that is required to promote subsequent C-N coupling and oxidation to nitrile. This study provides a better understanding of the role of vacancies as catalytic sites in heterogeneous photocatalysis.
RESUMO
Introducing a second metal species into atomically dispersed metal-nitrogen-carbon (M-N-C) catalysts to construct diatomic sites (DASs) is an effective strategy to elevate their activities and stabilities. However, the common pyrolysis-based method usually leads to substantial uncertainty for the formation of DASs, and the precise identification of the resulting DASs is also rather difficult. In this regard, we developed a two-step specific-adsorption strategy (pyrolysis-free) and constructed a DAS catalyst featuring FeCo "molecular heterostructures" (FeCo-MHs). In order to rule out the possibility of the two apparently neighboring (in the electron microscopy image) Fe/Co atoms being dispersed respectively on the top/bottom surfaces of the carbon support and thus forming "false" MHs, we conducted in situ rotation (by 8°, far above the critical angle of 5.3°) and directly identified the individual FeCo-MHs. The formation of FeCo-MHs could modulate the magnetic moments of the metal centers and increase the ratio of low-spin Fe(II)-N4 moiety; thus the intrinsic activity could be optimized at the apex of the volcano-plot (a relationship as a function of magnetic moments of metal-phthalocyanine complexes and catalytic activities). The FeCo-MHs catalyst displays an exceptional ORR activity (E1/2 = 0.95 V) and could be used to construct high-performance cathodes for hydroxide exchange membrane fuel cells and zinc-air batteries.
RESUMO
Metal single-atom catalysts are promising in electrochemical CO2 reduction reaction (CO2 RR). The pores and cavities of the supports can promote the exposure of active sites and mass transfer of reactants, hence improve their performance. Here, iron oxalate is added to ZIF-8 and subsequently form hollow carbon nanocages during calcination. The formation mechanism of the hollow structure is studied in depth by controlling variables during synthesis. Kirkendall effect is the main reason for the formation of hollow porous carbon nanocages. The hollow porous carbon nanocages with Fe single atoms exhibit better CO2 RR activity and CO selectivity. The diffusion of CO2 facilitated by the mesoporous structure of carbon nanocage results in their superior activity and selectivity. This work has raised an effective strategy for the synthesis of hollow carbon nanomaterials, and provides a feasible pathway for the rational design of electrocatalysts for small molecule activation.
RESUMO
Designing efficient and durable bifunctional catalysts for 5-hydroxymethylfurfural (HMF) oxidation reaction (HMFOR) and hydrogen evolution reaction (HER) is desirable for the co-production of biomass-upgraded chemicals and sustainable hydrogen, which is limited by the competitive adsorption of hydroxyl species (OHads) and HMF molecules. Here, we report a class of Rh-O5/Ni(Fe) atomic site on nanoporous mesh-type layered double hydroxides with atomic-scale cooperative adsorption centers for highly active and stable alkaline HMFOR and HER catalysis. A low cell voltage of 1.48 V is required to achieve 100 mA cm-2 in an integrated electrolysis system along with excellent stability (>100 h). Operando infrared and X-ray absorption spectroscopic probes unveil that HMF molecules are selectively adsorbed and activated over the single-atom Rh sites and oxidized by in situ-formed electrophilic OHads species on neighboring Ni sites. Theoretical studies further demonstrate that the strong d-d orbital coupling interactions between atomic-level Rh and surrounding Ni atoms in the special Rh-O5/Ni(Fe) structure can greatly facilitate surface electronic exchange-and-transfer capabilities with the adsorbates (OHads and HMF molecules) and intermediates for efficient HMFOR and HER. We also reveal that the Fe sites in Rh-O5/Ni(Fe) structure can promote the electrocatalytic stability of the catalyst. Our findings provide new insights into catalyst design for complex reactions involving competitive adsorptions of multiple intermediates.
RESUMO
Copper (Cu), a promising catalyst for electrochemical CO2 reduction (CO2R) to multi-electron reduction products, suffers from an unavoidable and uncontrollable reconstruction process during the reaction, which not only may lead to catalyst deactivation but also brings great challenges to the exploration of the structure-performance relationship. Herein, we present an efficient strategy for stabilizing Cu with silica and synthesize reconstruction-resistant CuSiOx amorphous nanotube catalysts with abundant atomic Cu-O-Si interfacial sites. The strong interfacial interaction between Cu and silica makes the Cu-O-Si interfacial sites ultrastable in the CO2R reaction without any apparent reconstruction, thus exhibiting high CO2-to-CH4 selectivity (72.5%) and stability (FECH4 remains above 60% after 12 h of test). A remarkable CO2-to-CH4 conversion rate of 0.22 µmol cm-2 s-1 was also achieved in a flow cell device. This work provides a very promising route for the design of highly active and stable Cu-based CO2R catalysts.
RESUMO
Renewable-energy-powered electrochemical CO2 reduction (ECR) is a promising way of transforming CO2 to value-added products and achieving sustainable carbon recycling. By virtue of the extremely high exposure rate of active sites and excellent catalytic performance, atomic site catalysts (ASCs), including single-atomic site catalysts and diatomic site catalysts, have attracted considerable attention. In this feature article, we focus on the rational design strategies of ASCs developed in recent years for the ECR reaction. The influence of these strategies on the activity and selectivity of ASCs for ECR is further discussed in terms of electronic regulation, synergistic activation, microenvironmental regulation and tandem catalytic system construction. Finally, the challenges and future directions are indicated. We hope that this feature article will be helpful in the development of novel ASCs for ECR.
RESUMO
The oxygen reduction reaction (ORR) on transition single-atom catalysts (SACs) is sustainable in energy-conversion devices. However, the atomically controllable fabrication of single-atom sites and the sluggish kinetics of ORR have remained challenging. Here, we accelerate the kinetics of acid ORR through a direct O-O cleavage pathway through using a bi-functional ligand-assisted strategy to pre-control the distance of hetero-metal atoms. Concretely, the as-synthesized Fe-Zn diatomic pairs on carbon substrates exhibited an outstanding ORR performance with the ultrahigh half-wave potential of 0.86â V vs. RHE in acid electrolyte. Experimental evidence and density functional theory calculations confirmed that the Fe-Zn diatomic pairs with a specific distance range of around 3â Å, which is the key to their ultrahigh activity, average the interaction between hetero-diatomic active sites and oxygen molecules. This work offers new insight into atomically controllable SACs synthesis and addresses the limitations of the ORR dissociative mechanism.
RESUMO
Single-atom catalysts (SACs) have attracted extensive interest to catalyze the oxygen reduction reaction (ORR) in fuel cells and metal-air batteries. However, the development of SACs with high selectivity and long-term stability is a great challenge. In this work, carbon vacancy modified Fe-N-C SACs (FeH -N-C) are practically designed and synthesized through microenvironment modulation, achieving high-efficient utilization of active sites and optimization of electronic structures. The FeH -N-C catalyst exhibits a half-wave potential (E1/2 ) of 0.91 V and sufficient durability of 100 000 voltage cycles with 29 mV E1/2 loss. Density functional theory (DFT) calculations confirm that the vacancies around metal-N4 sites can reduce the adsorption free energy of OH*, and hinder the dissolution of metal center, significantly enhancing the ORR kinetics and stability. Accordingly, FeH -N-C SACs presented a high-power density and long-term stability over 1200 h in rechargeable zinc-air batteries (ZABs). This work will not only guide for developing highly active and stable SACs through rational modulation of metal-N4 sites, but also provide an insight into the optimization of the electronic structure to boost electrocatalytical performances.
RESUMO
Hydrogen evolution reaction (HER) in neutral media is of great practical importance for sustainable hydrogen production, but generally suffers from low activities, the cause of which has been a puzzle yet to be solved. Herein, by investigating the synergy between Ru single atoms (RuNC) and RuSex cluster compounds (RuSex) for HER using ab initio molecular dynamics, operando X-ray absorption spectroscopy, and operando surface-enhanced infrared absorption spectroscopy, we establish that the interfacial water governs neutral HER. The rigid interfacial water layer in neutral media would inhibit the transport of H2O*/OH* at the electrode/electrolyte interface of RuNC, but the RuSex can promote H2O*/OH* transport to increase the number of available H2O* on RuNC by disordering the interfacial water network. With the synergy of RuSex and RuNC, the resulting neutral HER performance in terms of mass-specific activity is 6.7 times higher than that of 20 wt.% Pt/C at overpotential of 100 mV.
RESUMO
Electrochemical CO2 reduction (ECR) is becoming an increasingly important technology for achieving carbon neutrality. Inspired by the structure of naturally occurring Mo-dependent enzymes capable of activating CO2 , a heteronuclear Mo-Se dual-single-atom electrocatalyst (MoSA-SeSA) for ECR into CO with a Faradaic efficiency of above 90% over a broad potential window from -0.4 to -1.0 V versus reversible hydrogen electrode is demonstrated here. Both operando characterization and theoretical simulation results verify that MoSA acts as central atoms that directly interact with the ECR feedstock and intermediates, whereas the SeSA adjacent to MoSA modulates the electronic structure of MoSA through long-range electron delocalization for inhibiting MoSA poisoning caused by strong CO adsorption. In addition, the SeSAs far from MoSA help suppress the competing hydrogen evolution side reaction and accelerate the CO2 transport by repelling H2 O. This work provides new insight into the precise regulation and in-depth understanding of multisite synergistic catalysis at the atomic scale.
RESUMO
As the most well-known electrocatalyst for cathodic hydrogen evolution in water splitting electrolyzers, platinum is unfortunately inefficient for anodic oxygen evolution due to its over-binding with oxygen species and excessive dissolution in oxidative environment. Herein we show that single Pt atoms dispersed in cobalt hydrogen phosphate with an unique Pt(OH)(O3)/Co(P) coordination can achieve remarkable catalytic activity and stability for oxygen evolution. The catalyst yields a high turnover frequency (35.1 ± 5.2 s-1) and mass activity (69.5 ± 10.3 A mg-1) at an overpotential of 300 mV and excellent stability. Mechanistic studies elucidate that the superior catalytic performance of isolated Pt atoms herein stems from optimal binding energies of oxygen intermediate and also their strong electronic coupling with neighboring Co atoms that suppresses the formation of soluble Ptx>4 species. Alkaline water electrolyzers assembled with an ultralow Pt loading realizes an industrial-level current density of 1 A cm-2 at 1.8 volts with a high durability.
RESUMO
A encapsulation-adsorption-pyrolysis strategy for the construction of atomically dispersed Co-Te diatomic sites (DASs) that are anchored in N-doped carbon is reported as an efficient bifunctional catalyst for electrocatalytic hydrogen evolution reaction (HER) and oxygen reduction reaction (ORR). The as-constructed catalyst shows the stable CoN3 C1 -TeN1 C3 coordination structure before and after HER and ORR. The *OOH/*H intermediate species are captured by in situ Raman and in situ attenuated total reflectance-surface enhanced infrared absorption spectroscopy, indicating that the reactant O2 /H2 O molecule has a strong interaction with the Co site, revealing that Coδ+ is an effective active site. Theoretical calculations show that the Coδ+ has adsorption-activation function and the neighboring Teδ+ acts as an electron donor adjusting the electronic structure of Coδ+ , promoting the dissociation of H2 O molecules and the adsorption of H and oxygen-containing intermediates in HER and ORR. In the meanwhile, the nearest C atom around Co also profoundly affects the adsorption of H atoms. This results in the weakening of the OH adsorption and enhancement of H adsorption, as well as the more stable water molecule dissociation transition state, thus significantly boosting ORR and HER performance.
RESUMO
High-performance, fully atomically dispersed single-atom catalysts (SACs) are promising candidates for next-generation industrial catalysts. However, it remains a great challenge to avoid the aggregation of isolated atoms into nanoparticles during the preparation and application of SACs. Here, the evolution of Pd species is investigated on different crystal facets of CeO2 , and vastly different behaviors on the single-atomic dispersion of surface Pd atoms are surprisingly discovered. In situ X-ray photoelectron spectroscopy (XPS), in situ near-ambient-pressure-XPS (NAP-XPS), in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and X-ray absorption spectroscopy (XAS) reveal that, in a reducing atmosphere, more oxygen vacancies are generated on the (100) facet of CeO2 , and Pd atoms can be trapped and thus feature atomic dispersion; by contrast, on the CeO2 (111) facet, Pd atoms will readily aggregate into clusters (Pdn ). Furthermore, Pd1 /CeO2 (100) gives a high selectivity of 90.3% for the catalytic N-alkylation reaction, which is 2.8 times higher than that for Pdn /CeO2 (111). This direct evidence demonstrates the crucial role of crystal-facet effects in the preparation of metal-atom-on-metal-oxide SACs. This work thus opens an avenue for the rational design and targeted synthesis of ultrastable and sinter-resistant SACs.
RESUMO
Heterojunctions modulated internal electric field (IEF) usually result in suboptimal efficiencies in carrier separation and utilization because of the narrow IEF distribution and long migration paths of photocarriers. In this work, we report distinctive bismuth oxyhydroxide compound nanorods (denoted as BOH NRs) featuring surface-exposed open channels and a simple chemical composition; by simply modifying the bulk anion layers to overcome the limitations of heterojunctions, the bulk IEF could be readily modulated. Benefiting from the unique crystal structure and the localization of valence electrons, the bulk IEF intensity increases with the atomic number of introduced halide anions. Therefore, A low exchange ratio (~10%) with halide anions (I-, Br-, Cl-) gives rise to a prominent elevation in carrier separation efficiency and better photocatalytic performance for benzylamine coupling oxidation. Here, our work offers new insights into the design and optimization of semiconductor photocatalysts.
RESUMO
Core-multishelled structures with controlled chemical composition have attracted great interest due to their fascinating electrochemical performance. Herein, a metal-organic framework (MOF)-on-MOF self-templated strategy is used to fabricate okra-like bimetal sulfide (Fe7 S8 /C@ZnS/N-C@C) with core-double-shelled structure, in which Fe7 S8 /C is distributed in the cores, and ZnS is embedded in one of the layers. The MOF-on-MOF precursor with an MIL-53 core, a ZIF-8 shell, and a resorcinol-formaldehyde (RF) layer (MIL-53@ZIF-8@RF) is prepared through a layer-by-layer assembly method. After calcination with sulfur powder, the resultant structure has a hierarchical carbon matrix, abundant internal interface, and tiered active material distribution. It provides fast sodium-ion reaction kinetics, a superior pseudocapacitance contribution, good resistance of volume changes, and stepwise sodiation/desodiation reaction mechanism. As an anode material for sodium-ion batteries, the electrochemical performance of Fe7 S8 /C@ZnS/N-C@C is superior to that of Fe7 S8 /C@ZnS/N-C, Fe7 S8 /C, or ZnS/N-C. It delivers a high and stable capacity of 364.7 mAh g-1 at current density of 5.0 A g-1 with 10 000 cycles, and registers only 0.00135% capacity decay per cycle. This MOF-on-MOF self-templated strategy may provide a method to construct core-multishelled structures with controlled component distributions for the energy conversion and storage.
RESUMO
For electrocatalysts for the hydrogen evolution reaction (HER), encapsulating transition metal phosphides (TMPs) into nitrogen-doped carbon materials has been known as an effective strategy to elevate the activity and stability. Yet still, it remains unclear how the TMPs work synergistically with the N-doped support, and which N configuration (pyridinic N, pyrrolic N, or graphitic N) contributes predominantly to the synergy. Here we present a HER electrocatalyst (denoted as MoP@NCHSs) comprising MoP nanoparticles encapsulated in N-doped carbon hollow spheres, which displays excellent activity and stability for HER in alkaline media. Results of experimental investigations and theoretical calculations indicate that the synergy between MoP and the pyridinic N can most effectively promote the HER in alkaline media.