Study on the Glass Transition Process of Polymer System Using Differential Scanning Calorimetry and Fourier Transform Infrared Spectroscopy.

The change in the infrared spectrum of polymer samples with temperature and their differential scanning calorimetry (DSC) experimental results are analyzed. According to the van't Hoff equation at constant pressure, the changes in the absorbance ratio corresponding to high and low vibrational states are calculated, and the apparent enthalpy differences of the vibration energy states transformation of the characteristic group can be obtained. From the experimental results, we can find that characteristic vibration modes of a chemical group in a polymer are under the influence of the glass transition process of the polymer with a different extent. The characteristic vibration modes of the same chemical group behave differently due to the influence of the polymer system at which the chemical moiety is situated.

Polyelectrolyte-surfactant complex as a template for the synthesis of zeolites with intracrystalline mesopores.

Mesoporous zeolite silicalite-1 and Al-ZSM-5 with intracrystalline mesopores were synthesized with polyelectrolyte-surfactant complex as the template. Complex colloids were first formed by self-assembly of the anionic polymer poly(acrylic acid) (PAA) and the cationic surfactant cetyltrimethylammonium bromide (CTAB) in basic solution. During the synthesis procedure, upon the addition of the silica source, microporous template (tetrapropylammonium hydroxide), and NaCl, these PAA/CTA complex colloids underwent dissociation and gave rise to the formation of hollow silica spheres with mesoporous shells templated by CTAB micelles and PAA domains as the core. Under hydrothermal treatment, the hollow silica spheres gradually merged together to form larger particles with the PAA domains embedded as the space occupant, which acted as a template for intracrystalline mesopores during the crystallization of the zeolite framework. Amphiphilic organosilane was used to enhance the connection between the PAA domain and the silica phase during the synthesis. After calcination, single crystal-like zeolite particles with intracrystalline mesopores of about 5-20 nm were obtained, as characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and N(2) adsorption measurements. With the addition of an aluminum source in the synthesis, mesoporous zeolite Al-ZSM-5 with intracrystalline mesopores was also synthesized, and enhanced catalytic property was observed with mesoporous Al-ZSM-5 in acetalization of cyclohexanone with methanol.

Synthesis of hydrothermally stable, hierarchically mesoporous aluminosilicate Al-SBA-1 and their catalytic properties.

Hydrothermally stable mesoporous aluminosilicates Al-SBA-1 with hierarchical pore structure have been successfully synthesized under alkaline condition at 120 °C by employing organic mesomorphous complexes of polyelectrolyte (poly(acrylic acid) (PAA)) and cationic surfactant (hexadecyl pyridinium chloride (CPC)) as template. The Si/Al ratio could be as high as 5 and the incorporation of Al into the silica framework did not disturb the well-ordered cubic Pm ̅3n mesostructure. Meanwhile, the incorporation of Al could greatly increase the specific surface area and pore volume of the samples. The Al-SBA-1 materials exhibited a high hydrothermal stability and remained stable even after being treated in boiling water for 10 days. The catalytic activity of the Al-SBA-1 materials was investigated by employing the Friedel-Crafts alkylation of toluene with benzyl alcohol as a model reaction and they exhibited excellent catalytic property due to the incorporated acid sites and the hierarchically mesoporous structure.

Facile fabrication of noble metal nanoparticles encapsulated in hollow silica with radially oriented mesopores: multiple roles of the N-lauroylsarcosine sodium surfactant.

A facile one-pot method was reported to fabricate noble metal nanoparticles encapsulated in silica hollow nanospheres with radially oriented mesopores, and the anionic amino acid surfactant, N-lauroylsarcosine sodium, played multiple roles: reducing agent, stabilizer, emulsion droplets and mesopore template.

A comparison study between polymeric ligand and monomeric ligand for oligopeptide adsorption.

This work aimed to compare two types of affinity ligands, i.e. polymeric and monomeric ligands, by investigating their adsorption affinity, capacity and selectivity to oligopeptide. The peptide NH(2)-VVRGCTWW-COOH (VW-8) was chosen as the target adsorbate, while histidine (His), aspartic acid (Asp), and leucine (Leu) were selected as the ligands, respectively. For each kind of ligand, both monomeric (M) and polymeric (P) forms were introduced onto the Sepharose matrix respectively to obtain the corresponding adsorbents. Both affinity tests using isothermal titration calorimetry (ITC) and adsorption capacities using static adsorption experiments indicated that the adsorbents with polymeric ligands (MX-P) exhibited better adsorption ability for VW-8 than the adsorbents with monomeric ligands (MX-M). In particular, the MX-PHis exhibited its affinity constant of 2.39 × 10(6) M(-1) and its adsorption capacity of 77.4 mg/g for VW-8, which was approximately 8-10 times higher than that of MX-MHis. Such distinct adsorption abilities between polymeric and monomeric ligands were interpreted based on nuclear magnetic resonance (NMR) and ITC data, and the results indicated that such better characters of polymeric ligands were ascribed to their good flexibility which facilitated the cooperative effects as well as the accessibility of ligands to the peptide. Additionally, the selective adsorption experiments indicated that all the adsorbents with polymeric ligands exhibited good selectivity to the peptide VW-8.

Effects of oligopeptide's conformational changes on its adsorption.

We report the effects of peptide adsorption to cross-linked polymers (adsorbents) by its conformational changes. Two adsorbents, APhe and ALeu, were prepared and expected to show high affinity to the oligopeptide VW-8 (NH(2)-Val-Val-Arg-Gly-Cys-Thr-Trp-Trp-COOH) according to our previous studies. These absorbents bared the residues of phenylalanine and leucine, respectively, and carried both hydrophobic and electrical groups. The adsorbent AAsp, which carried only the electrostatic groups, was also prepared as a reference. Both APhe and ALeu were found to exhibit higher VW-8 capacity than AAsp, in which APhe showed the highest VW-8 capacity (13.6 mg/g). The VW-8 adsorption to ALeu and APhe was analyzed using a variety of techniques, including the surface plasmon resonance (SPR) technology, nuclear magnetic resonance (NMR) spectra and isothermal titration calorimetry (ITC). The comprehensive experimental data together indicated that APhe could induce a conformational change of VW-8 from a random-coil to a ß-strand structure due to its ability to provide the strong ring stacking and electrostatic interactions, which is believed to be responsible for its highest adsorption affinity (K(a)=2.59×10(7) M(-1)). In contrast, the hydrophobic interactions provided by ALeu were not strong enough to induce a VW-8 conformational change to a regular structure, and therefore it exhibited a relatively lower affinity to VW-8 (K(a)=6.23×10(5) M(-1)). The results presented in this work showed that peptide adsorption can be influenced by its conformational changes induced by suitable adsorbents via strong non-covalent interactions.

Porous lanthanide oxides via a precursor method: morphology control through competitive interaction of lanthanide cations with oxalate anions and amino acids.

Porous lanthanide oxides were fabricated by a precursor-thermolysis method. The precursors were synthesized by a hydrothermal reaction with lanthanide (La, Ce, Pr and Nd) salts, sodium oxalate and asparagine (or glutamine). Under hydrothermal conditions asparagine and glutamine exhibited greatly different complexation abilities with lanthanide cations. The competitive interactions of lanthanide cations with oxalate anions and asparagine (or glutamine) gave rise to the formation of precursors with different structures and morphologies. ESI-MS detection further confirmed the different complexation abilities of asparagine or glutamine with lanthanide cations at the molecular level. Variation of oxalate anion concentration or the pH value of the reaction solution could tune the morphology of the products. After calcination, porous lanthanide oxides were obtained with the morphologies of their corresponding precursors. Our work suggests that the complexation ability of organic molecules with metal cations could be a crucial factor for morphological control of the precursors. Moreover, considering the diversity of organic additives and metal salts, other metal oxides with complex composition and morphology could be fabricated via this organic molecule-modified precursor method.

Fabrication of lanthanide oxide microspheres and hollow spheres by thermolysis of pre-molding lanthanide coordination compounds.

A series of lanthanide oxide microspheres and hollow spheres have been fabricated by thermolysis of corresponding lanthanide coordination compounds formed via bottom-up self-assembly.

Effect of alcohol on morphology and mesostructure control of anionic-surfactant-templated mesoporous silica (AMS).

In the synthesis of anionic-surfactant-templated mesoporous silica (AMS), the effects of alcohols have been investigated for the first time. Without the addition of extra alcohols, spherical mesoporous silica with radially oriented mesopores could be obtained through the anionic surfactant templating route. By using alcohols with different carbon chain length such as ethanol, n-butanol, hexanol and 1-octanol as the additives, different morphologies and mesostructures of mesoporous silica were obtained. It was found that both the types and concentrations of alcohols in the synthesis solution could tune the morphologies and mesostructures of the AMS, giving rise to the formation of hexagonal mesoporous discs and particles with novel multi-layered inner structure. In general alcohol with appropriate carbon chain length such as n-butanol and hexanol could act as the co-surfactant in the synthesis of mesoporous silica templated by anionic surfactant.

Anionic surfactant-templated mesoporous silica (AMS) nano-spheres with radially oriented mesopores.

Mesoporous silica nano-spheres with pore size larger than 3 nm were synthesized using an anionic surfactant as the template. These nano-spheres possess centrosymmetric radial mesopores (emanating from the spherical center to the exterior surface) and form stable suspension. The spherical size and mesostructure can be finely tuned by changing the pH value of the synthetic system in the range of 8.8 to 6.4. In addition, when the pH value was decreased to 5.8, instead of spheres, anisotropic morphologies such as elliptical, peanutlike and trifurcate particles were obtained, exhibiting core/shell structure due to the different orientations of the mesopores in the core and the shell of the particles. It is proposed that the evolution of the morphologies and mesostructures of the products templated by anionic surfactants strongly depend on the pH value of the synthetic system.