In situ Construction of Multistage Core-Shell Nanostructure as Bifunctional Catalyst for Ultrastable Zinc-Air Batteries.

Many efforts have been devoted to obtaining excellent cathode catalysts for Zinc air batteries (ZABs), but the inevitable use of binder will damage the catalytic activity and weaken long-term stability, inefficient mass transfer of oxygen is also chargable for the limited activity. Herein, in situ grown hydrogen substituted graphdiyne (HGDY) on carbon paper has been prepared and used as cathode catalyst layer in ZABs. Multiple catalytic sites are firmly combined and end with the boosted bifunctional catalytic activity of oxygen reduction and oxygen evolution. Moreover, the specific surface area, sufficient active sites, multilevel pore nanostructure and robust conductivity are fully exposed to establish efficient catalytic interface and skeleton. Cu/Co nanoparticles are uniformly distributed and warped by HGDY network, which can stably exist during the catalytic process. As a result, a current density of 18.75 mA cm-2 and a Tafel slope of 61.06 mV dec-1 for oxygen reduction and a ultralong operation for more than 2300 h in aqueous ZAB have been achieved, which is beyond many reported bifunctional catalysts in ZAB system.

A novel catalyst derived from Co-ZIFs to grow N-doped carbon nanotubes for all-solid-state supercapacitors with high performance.

Carbon nanotubes (CNTs) have been widely used as electrode materials for electrochemical energy storage devices (e.g., supercapacitors) due to their excellent chemical and physical properties. However, conventional approaches (e.g., electron-beam vapor deposition and atomic layer deposition) to fabricate catalysts for the growth of CNTs are complex and demand high energy consumption. Herein, we report a facile method to synthesize catalysts derived from cobalt-containing zeolitic imidazolate frameworks (Co-ZIFs), which is exploited to in situ construct the three-dimensional (3D) CNT hybrid materials for all-solid-state supercapacitors. In brief, Co-ZIFs with a controllable structure is first grown on the inner porous surface of carbon foams pyrolyzed from commercial melamine foams, followed by thermal annealing and chemical vapor deposition to grow CNTs, achieving 3D free-standing CNT-based hybrids. The well-distributed Co-ZIFs in the carbon foam enable the grown CNTs with uniform structures and morphologies. Using the fabricated CNT-based hybrid as electrodes, the assembled all-solid-state supercapacitors show a high specific capacitance of 19.4 mF cm-2 at a current density of 0.5 mA cm-2, which could be further optimized to as high as 871.8 mF cm-2 by incorporating the pseudocapacitive material of manganese dioxide in CNT-based hybrids. This study provides a facile solution approach to fabricate the catalyst for the growth of a CNT inner porous substrate; the resultant 3D free-standing hybrids could be used as efficient electrodes for high-performance energy storage devices beyond supercapacitors.

Ultrasensitive Pressure Sensor Sponge Using Liquid Metal Modulated Nitrogen-Doped Graphene Nanosheets.

Wearable pressure sensors are crucial for real-time monitoring of human activities and biomimetic robot status. Here, the ultrasensitive pressure sensor sponge is prepared by a facile method, realizing ultrasensitive pressure sensing for wearable health monitoring. Since the liquid metal in the sponge-skeleton structure under pressure is conducive to adjust the contact area with nitrogen-doped graphene nanosheets and thus facilitates the charge transfer at the interface, such sensors exhibit a fast response and recovery speed with the response/recovery time 0.41/0.12 s and a comprehensive response range with a sensitivity of up to 476 KPa-1. Notably, the liquid metal-based spongy pressure sensor can accurately monitor the human body's pulse, the pressure on the skin, throat swallowing, and other activities in real time, demonstrating a broad application prospect. Those results provide a convenient and low-cost way to fabricate easily perceptible pressure sensors, expanded the application potential of liquid metal-based composites for future electronic skin development.

3D Carbiyne Nanospheres Boosting Excellent Lithium and Sodium Storage Performance.

Reasonable design of electrode materials with specific morphology and structure can efficiently improve the metal ions storage and transmission properties of metal ion batteries. Here the preparation of spirobifluorene-based three-dimensional carbiyne nanosphere (SBFCY-NS) that is composed of spirobifluorene (SBF) and alkyne bonds is reported. Benefiting from the rigid spatial structure of SBF, numerous precursors are coupled through the connection of acetylene bonds, extending to form solid nanospheres. Abundant storage spaces and convenient multi-directional transmission paths for metal ions are available inside the three-dimensional (3D) carbiyne structure. Thus, SBFCY-NS is applied as efficient anode for lithium-ion battery and sodium-ion battery. The good stability of SBFCY-NS-based electrode and its improved Coulombic efficiency can be attributed to the special morphology of nanospheres, which can easily form thin and stable solid electrolyte interface film on the surface. Those results further promote the preparation of spherical carbon-based materials with abundant pores that can be applied in the field of electrodes.