Effects of Halogen Lamp and Traditional Sun Drying on the Volatile Compounds, Color Parameters, and Gel Texture of Gongliao Gelidium Seaweed.

Traditionally, the processing of Gelidium seaweed into Gelidium jelly was very complicated, and involved repeated washing with water and sun drying for seven rounds. The seaweed, which is originally reddish-purple in color, turns yellow in color after the repeated washing and sun drying cycles. However, the sun drying process can only be used on sunny days. Therefore, this study evaluated an alternative method, halogen lamp drying, and compared the qualities of the product, Gelidium jelly, made using the halogen lamp drying and traditional sun drying methods. The properties investigated included the agar yield, gelling temperature, hardness, springiness, rheological parameters, sensory attributes, color, and volatile compounds. The results demonstrated that the halogen lamp drying method required 12 washing and drying cycles to achieve similar jelly properties to seven rounds of sun drying in the experimental conditions. Volatiles including heptanal, ß-ionone, and (E)-2-decenal could be used as indicators to monitor the washing and drying processes. Halogen lamp drying could be an alternative processing method for seaweed drying, especially on rainy days.

The Effect of Hydrocolloids on Penetration Tests and Syneresis of Binary Gum Gels and Modified Corn Starch-Gum Gels.

The interactions among agar, gellan gum, gelatin, and modified waxy corn starch in the formation of mixed gels were examined in five different ratios. Binary hydrocolloid gels were prepared using three ingredients: two hydrocolloids (total hydrocolloid concentration: 0.5 wt%, ratios of mixture: 0/0.5, 0.1/0.4, 0.2/0.3, 0.3/0.2, 0.4/0.1, and 0.5/0) and water. The textural properties of the hydrocolloid gels were studied by measuring the gel strength, rigidity, breaking force, breaking point, and syneresis as functions of the mixing ratio. The higher syneresis percentage of binary modified waxy corn starch and gum gels than that of mixed gum gels after cold storage was mainly due to the retrogradation of amylopectin. Agar was shown be the most influential with regards to increasing the gel strength, breaking force, and rigidity among the three kinds of gum, while gellan gum was more effective against syneresis than agar and gelatin for storage periods of 7 and 14 days. In the mixed gels, a dramatic increase in the breaking point from 0 to 0.5% was only exhibited for gellan gum. The results provided useful information, including gel strength, rigidity, breaking force, breaking point, and syneresis, for gum and modified corn starch ingredients selected from refrigerated binary gum gels such as pudding for food product development.

Comparison of Physicochemical Properties of Noodles Fortified with Commercial Calcium Salts versus Calcium Citrate from Oyster Shells.

This study examined the physicochemical effects of the fortification of noodles with 0.25-1.00% (w/w) calcium salts, viz. calcium acetate, calcium carbonate, calcium citrate, and calcium lactate. Fortification with calcium citrate, calcium acetate, and calcium carbonate increased the pH and breaking force of the dried noodles. However, the fortification of noodles with any concentration of calcium did not increase the extent of elongation of the control raw noodles. The L* and b* values of the raw and dried noodle color increased with increasing concentrations of calcium salts, except for noodles with added calcium citrate. Fortification with calcium citrate yielded no significant influence on color, texture, adhesiveness, springiness, flavor, and overall scores for cooked noodles. Noodles fortified with 0.5% calcium citrate made from oyster shells were compared with a control sample of noodles and noodles fortified with commercially available calcium citrate. The particle size of the calcium citrate made from oyster shells (258 nm) was smaller than that of the purchased calcium citrate (2631 nm). Noodles fortified with calcium citrate made from oyster shells showed no significantly difference compared to noodles fortified with commercially available calcium citrate. These results suggest that calcium citrate made from oyster shells may be used as the additive of choice for the manufacture of calcium-fortified noodles.

Physicochemical and Volatile Flavor Properties of Fish Skin under Conventional Frying, Air Frying and Vacuum Frying.

The aim of this study was to investigate the physicochemical characteristics and volatile flavor of fried tilapia skins under three frying methods. Conventional deep-fat frying usually increases the oil content of the fried fish skin and leads to lipid oxidation, which reduces the product quality. Alternative frying methods, such as air frying for 6 and 12 min under 180 °C (AF6, and AF12) and vacuum frying at 0.085 MPa for 8 and 24 min under 120 °C (VF8, and VF24) were compared to conventional frying for 2 and 8 min under 180 °C (CF2, and CF8) for tilapia skin. Physical properties of fried skin, such as the moisture content, water activity, L* values and breaking force decreased under all frying methods, while the lipid oxidation and a*, b* values increased with the increase in frying time. In general, VF offered higher hardness of product compared to AF which had a lower breaking force. Especially AF12 and CF8 had the lowest breaking force, which indicated higher crispness. For the oil quality inside the product, AF and VF reduced conjugated dienes formation and retarded oxidation compared to CF. The results of the flavor compositions of fish skin measured using gas chromatography mass spectrometry (GC/MS) with solid phase microextraction (SPME) showed that CF obtained higher unpleasant oily odor (nonanal, 2,4-decadienal, etc.), while AF presented greater grilling flavor (pyrazine derivatives). Because fish skin fried by AF only relied on hot air, Maillard reaction derived compounds, such as methylpyrazine, 2,5-dimethylpyrazine, and benzaldehyde were the leading flavors. This made the aroma profiles of AF very different from VF and CF. Among all the approaches, AF and VF developed lower oil content, mild fat oxidation and better flavor attributes, which proves their practical applications for frying tilapia fish skin.

The effect of okra (Abelmoschus esculentus l.) Powder Addition on Qualities of Gluten-free Chiffon Cake.

Rice flour (100%, 97.4%, 94.7%, 89.5% (w/w)) and okra powder (2.6%-10.5%) were used to replace wheat flour to make gluten-free chiffon cakes. The effects of okra powder addition on the physicochemical, color, texture, moisture content, total phenolic content, antioxidant, and sensory scores of cakes were evaluated. The batter viscosity, chewiness, ash, protein, fat, total phenolics, and antioxidant activities (1,1-diphenyl-z-picrylhydrazyl hydrate and reducing power) of cakes showed an increasing trend with okra powder addition. Gluten-free chiffon cake containing 5.3% okra powder showed significantly (p < 0.05) higher protein and ash contents as compared to their control and chiffon cake made with wheat flour. Nevertheless, center height, volume index, L*, a*, and b* values, and white index of gluten-free cake decreased with increased okra powder levels. The sensory characteristics of wheat and gluten-free chiffon cakes substituted with 2.6%-5.3% okra powder showed no difference (p > 0.05). Nevertheless, the sensory scores of the 5.3% okra powder addition cake obtained a higher preference than other gluten-free cakes. Although the overall acceptability of gluten-free chiffon cake supplemented with 10.5% okra flour had a lower (p < 0.05) overall acceptability (2.84) than all cake samples, it was still shown acceptable to consumers. Gluten-free rice chiffon cakes with high nutrient contents and antioxidant activities can be processed by the incorporation of okra powder of less than 10.5% to increase the diversification of gluten-free foods. Gluten-free cakes with high amounts of okra powder addition would produce cake having high water content, total phenol content, 1,1-diphenyl-z-picrylhydrazyl hydrate radical scavenging activity, reducing power, hardness, chewiness, cohesiveness, batter viscosity, ash, and crude protein content through principal component analysis.

Effects of Sodium Alginate, Pectin and Chitosan Addition on the Physicochemical Properties, Acrylamide Formation and Hydroxymethylfurfural Generation of Air Fried Biscuits.

This study evaluated the effects of sodium alginate, pectin and chitosan addition (0.5-1.5%) on the physicochemical properties including pH, water activity, moisture content, color values, hardness, diameter, thickness, spread ratio, antioxidant activities and sensory scores of biscuits in air frying processing. In addition, the formation of acrylamide and hydroxymethylfurfural (HMF) were discussed. Physicochemical properties of biscuits including water content, water activity, hardness, appearance, shape, color, flavor, texture, overall acceptability, and DPPH radical scavenging activity of biscuits were not influenced significantly by the addition (0.5-1.0%) of three food hydrocolloids. The data showed that the biscuits with hydrocolloids addition had lower acrylamide contents than that of the control biscuit without hydrocolloids addition, and the reducing power of biscuits increased after adding the hydrocolloids. The highest mitigation of acrylamide formation was obtained by the chitosan addition formulation. The formation of acrylamide showed a negative correlation with the content of sodium alginate and chitosan addition, and they were effective ingredients in terms of mitigating the formation of acrylamide in biscuit formulation.

Effect of Chitosan Incorporation on the Development of Acrylamide during Maillard Reaction in Fructose-Asparagine Model Solution and the Functional Characteristics of the Resultants.

The objectives of this study were to evaluate the effect of 0.5% chitosan incorporation on acrylamide development in a food model solution containing 0.5% fructose and asparagine after heating for 30 min at 180 °C. All the solutions were investigated for the following characteristics: acrylamide, asparagine, reducing sugar content, color, kinematic viscosity, Maillard reaction products (MRPs), and pH every 10 min. After heating for 10 min, the viscosity of chitosan-containing solutions reduced significantly. The investigational data confirmed that chitosan may have decomposed into lower molecular structures, as demonstrated by the reduced viscosity of the solution at pH < 6 and a decrease in the acrylamide content during 30 min of heating in a fructose−asparagine system. This study also confirms that the formation of ultraviolet-absorbing intermediates and browning intensity of MRPs containing acrylamide prepared by fructose−asparagine was more than those of MRPs prepared by glucose−asparagine solution system. MRPs containing acrylamide resulted from the reaction of asparagine with fructose (ketose) rather than glucose (aldose). Acrylamide formation could be significantly mitigated in the fructose−asparagine−chitosan model system as compared to the fructose−asparagine model system for possible beverage and food application.

Kinetics of Moisture Loss and Oil Absorption of Pork Rinds during Deep-Fat, Microwave-Assisted and Vacuum Frying.

The fat content of fried pork rinds is high, and alternative frying helps reduce the oil content and maintain their texture and taste. Different frying methods such as microwave-assisted, traditional deep frying and vacuum frying on the breaking force, color, microstructure, water loss and oil absorption attributes of fried pork rinds were evaluated in this study. The fat content of microwave-assisted and vacuum-fried pork rinds was lower (24.2 g/100 g dry weight basis (db) and 17.1 g/100 g db, respectively) than that (35.6 g/100 g db) of traditional deep-fat frying. Non-uniform, holy and irregular surface microstructures were obtained by vacuum frying due to rapid mass transfer at low pressure. The first-order kinetic models of water loss and oil absorption of traditional and microwave-assisted frying of pork rinds were established. Microwave frying caused a faster moisture loss rate, shorter frying time and lower pork rind oil content, makes it an attractive substitute for traditional deep-fat frying.

Kinetics of Oil Absorption and Moisture Loss during Deep-Frying of Pork Skin with Different Thickness.

We have investigated different properties (thickness, moisture loss, oil uptake, breaking force, color, puffing ratio during 0.5-5 min frying, microstructure, and sensory evaluation) of raw pork skins with varying thickness (2, 3, and 4 mm) after drying, intended as deep-fried snacks. We have found that the oil content, breaking force, and puffing ratio of fried pork skin with different raw skin thickness have no significant difference under similar water content (1.68-1.98 g/100 g wet weight basis, wb) after 3-5 min of deep-frying at 180 °C. Additionally, sensory score results have shown that fried pork skins with 4 mm raw skin thickness had lower flavor, texture, and overall acceptability than those with 2 mm and 3 mm raw skin thickness. Scanning electron micrographs (SEM) have revealed less holes and irregular and crack microstructure in fried pork skins with 4 mm raw skin thickness than in other groups. Different thickness of raw pork skins resulted in different effects in microstructure and influenced water evaporation and oil uptake of fried pork skin. Finally, we have proposed the kinetic equations of water loss and oil uptake of fried pork skins. Fried pork skin from raw skin thicker than 4 mm need frying at temperature higher than 180 °C to improve their puffing ratio and sensory acceptability.

Effect of Hydroxymethylfurfural and Low-Molecular-Weight Chitosan on Formation of Acrylamide and Hydroxymethylfurfural during Maillard Reaction in Glucose and Asparagine Model Systems.

The aim of this research was to investigate the effects of the addition of 0.5% hydroxymethylfurfural (HMF) and low molecular chitosan on acrylamide and HMF formation in a food model system, which contains 0.5% glucose, asparagine, and HMF within 30 min of heating at 180 °C. At an interval of 10 min, all solutions were evaluated in the following aspects: reducing sugar, asparagine, acrylamide, HMF content, pH, Maillard reaction products, kinematic viscosity, and color. After heating for 10 min, the kinematic viscosity of solutions containing chitosan reduced significantly. The values of the acrylamide, HMF, and absorbance increased at OD294 and OD420 (optical density measured at 294 nm and 420 nm) of solutions. Experimental results showed that low-molecular-weight chitosan might be hydrolyzed into much lower molecular weight, followed by the decrease in kinematic viscosity of the solution at pH lower than 6 and the increase in the formation of acrylamide after heating for 30 min.

Preparation of a Fucoidan-Grafted Hyaluronan Composite Hydrogel for the Induction of Osteoblast Differentiation in Osteoblast-Like Cells.

A suitable bone substitute is necessary in bone regenerative medicine. Hyaluronan (HA) has excellent biocompatibility and biodegradability and is widely used in tissue engineering. Additionally, research on fucoidan (Fu), a fucose- and sulfate-rich polysaccharide from brown seaweed, for the promotion of bone osteogenic differentiation has increased exponentially. In this study, HA and Fu were functionalized by grafting methacrylic groups onto the backbone of the chain. Methacrylate-hyaluronan (MHA) and methacrylate-fucoidan (MFu) were characterized by FTIR and 1H NMR spectroscopy to confirm functionalization. The degrees of methacrylation (DMs) of MHA and MFu were 9.2% and 98.6%, respectively. Furthermore, we evaluated the mechanical properties of the hydrogels formed from mixtures of photo-crosslinkable MHA (1%) with varying concentrations of MFu (0%, 0.5%, and 1%). There were no changes in the hardness values of the hydrogels, but the elastic modulus decreased upon the addition of MFu, and these mechanical properties were not significantly different with or without preosteoblastic MG63 cell culture for up to 28 days. Furthermore, the cell morphologies and viabilities were not significantly different after culture with the MHA, MHA-MFu0.5, or MHA-MFu1.0 hydrogels, but the specific activity and mineralization of alkaline phosphatase (ALP) were significantly higher in the MHA-MFu1.0 hydrogel group compared to the other hydrogels. Hence, MHA-MFu composite hydrogels are potential bone graft materials that can provide a flexible structure and favorable niche for inducing bone osteogenic differentiation.

Influence of caramel and molasses addition on acrylamide and 5-hydroxylmethylfurfural formation and sensory characteristics of non-centrifugal cane sugar during manufacturing.

BACKGROUND: The aims of this study are to (i) evaluate the effects of color enhancers, caramel (C) and molasses (M), on acrylamide and 5-hydroxylmethylfurfural (HMF) formation in non-centrifugal cane sugar (NCS) and to (ii) perform nine-point hedonic scale and evaluation of sensory attributes, encompassing the appearance, flavor, texture and aftertaste, by 71 consumers on NCS, NCS_C, and NCS products made with a blend of molasses and sugar (NCS_MS) and steam processing (NCS_S). RESULTS: With the addition of molasses and caramel at the maximum allowable level of 5 g kg-1 in sugarcane juice, significantly greater acrylamide or HMF did not accumulate in NCS_C and NCS_M during the thermal manufacturing process, while color values of NCS_C significantly changed (P < 0.05). The increases in acrylamide and HMF contents were influenced by pH because they were produced by the Maillard reaction. Hedonic responses showed that NCS_MS was rated with the highest score for overall acceptance, whereas NCS_S, with the lowest content of acrylamide, exhibited the lowest score for every attribute. In addition, the appearance acceptance score of NCS_C was significantly higher than that of NCS (P < 0.05). Significant differences were also found between NCS and NCS_C in the frequency of 9 of 16 items with which consumers selected to characterize the appearance in a check-all-that-apply questionnaire (P < 0.05). CONCLUSIONS: The association between hedonic evaluations and sensory profiles in visual attributes of NCS_C indicated that caramel could be a promising addition in Maillard reaction-mitigated NCS products to improve consumer preferences through color strengthening without safety concerns. © 2020 Society of Chemical Industry.

Effects of calcium citrate, chitosan and chitooligosaccharide addition on acrylamide and 5-hydroxymethylfurfural formation in dark brown sugar.

Calcium citrate, chitosan, and chitooligosaccharide were added to sugarcane juice to investigate their effect on color, pH, antioxidant activity, reducing sugar, acrylamide and HMF mitigation in dark brown sugar production. Results showed that the content of 52-67% acrylamide in the dark brown sugar was mitigated with 0.1-1.0% chitosan addition and the reducing power of dark brown sugar increased with 0.5-1.0% chitosan addition. Furthermore, the addition of 0.5-1.0% chitosan or chitooligosaccharide increased HMF formation. Only the pH of dark brown sugar with chitosan addition was lower than that of other dark brown sugars. This is due to the low pH condition in dark brown sugar mitigating Maillard reaction and acrylamide formation. When the pH of sugarcane juice with chitosan adjusted back to pH 7 again, the acrylamide content of dark brown sugars significant increased (p < 0.05). Acrylamide and HMF are both produced through the Maillard reaction, the lower pH will cause the hydrolysis of sucrose to produce more HMF and reducing sugar. The L values and white index of dark brown sugar with 0.5-1.0% added chitosan were lower than those of control dark brown sugar (p < 0.05). High negative correlation was observed between HMF and acrylamide in the present study.

Incorporation of chia seed flour into gluten-free rice layer cake: Effects on nutritional quality and physicochemical properties.

The purpose of this research was to incorporate 0% to 30% chia seed flour into rice flour gluten-free layer cake and evaluate its effect on nutritional qualities and physicochemical properties. The supplement of chia seed flour resulted in higher batter viscosity, hardness of gluten free layer cake, crude protein, fat, ash, α-linolenic acid (increase up to 10.2% of total fatty acid), total phenolics content, and reducing power but the lower crust, crumb white index, cohesiveness, and resilience of gluten-free layer cake was found. Substitution of rice flour with 10% prehydrated chia seed flour can achieve a higher center height and volume index of gluten-free layer cakes. Higher carosine and angiotension I-converting enzyme (ACE) inhibitory activity was observed in the supplement of 10% chia seed flour when compared to a rice flour layer cake. Gluten-free layer cake with 10% prehydrated chia seeds flour had similar overall acceptability, texture, flavor, and odor scores except for lower appearance score to those of gluten-free layer cake made with 100% rice flour and layer cake made with 100% wheat flour. Incorporation of 10% prehydrated chia seed flour results in more desirable volume index of gluten-free layer cake and it is feasible for gluten-free layer cake application. Gluten-free layer cakes with improved quality characteristics and high nutritional value can be manufactured by the incorporation of chia seed flour.

Quality function deployment modified for the food industry: An example of a granola bar.

Applying quality function deployment (QFD) in the food industry is complex. The objective of this study was to provide a modified QFD approach to facilitate its use and test it on a granola bar. A 7-step model is proposed (modified from the 9-step sensory attributes model) incorporating competitive analysis to acquire final importance ratings of customer needs, the application of fuzzy logic in surveys and interviews, and replacing precise value of relative technical ratings by priority rankings. The 7-step model starts with understanding customer needs (WHATs) and prioritizing their importance based on the customer survey and competitive analysis, followed by identification of product's sensory attributes (HOWs) and the strength of their relationship with customer needs. Lastly, relative technical ratings-to develop priority rankings for the product development team-are determined based on the degree of importance of the WHATs and the strength of the relationships between the WHATs and the HOWs. Testing the 7-step model on granola bars showed that the relative technical ratings reflected the majority of customer needs and the importance they attached to those needs.

Effect of Chitosan and Fish Gelatin Coatings on Preventing the Deterioration and Preserving the Quality of Fresh-Cut Apples.

The effect of fish gelatin and chitosan coatings on the physicochemical characteristics of fresh-cut apples (Malus pumila Mill.), stored at 5 °C and 22 °C, was investigated. Chitosan provided an effective control for microbial growth, maintained firmness during 4 days of storage at room temperature (22 °C), and 12 days at refrigerator (5 °C). The results indicated that chitosan coating caused a significant decrease (p < 0.05) in the L* value of cube color of cut apples. Fish gelatin-chitosan coatings mitigated the L* value and decrease in hue angle of the cut apple samples, at cold storage. Experimental results showed that fish gelatin-chitosan and chitosan coatings, can be used to mitigate the formation of vitamin C, due to respiration, microbial growth, and weight loss at cold storage. Fish gelatin-chitosan coating might be a better combination for maintaining appearance and extending shelf-life of cut apples, compared to only chitosan coatings.

Functional Characteristics of Ultraviolet-Irradiated Tilapia Fish Skin Gelatin.

Studies were undertaken to investigate the effects of ultraviolet (UV) irradiation on the gel strength, color, thermal properties, protein molecular masses, and functional groups of commercially available fish gelatin samples. Commercially available tilapia skin gelatin powder was used as the raw material to investigate the functional properties of fish skin gelatin powder treated with UV irradiation for different durations (0⁻6 h). The functional properties of fish gelatin and the optimum irradiation treatment conditions were determined through gel strength testing, color characterization, differential scanning calorimetry, sodium dodecyl sulfate polyacrylamide gel electrophoresis, Fourier transform infrared (FTIR) spectroscopy, and Raman spectroscopy. UV irradiation treatment increased gel strength and thermal stability, and significantly degraded the macromolecules. FTIR and Raman spectroscopy data indicated that UV irradiation treatment did not significantly change the molecular structure of fish gelatin powder, but these methods could discriminate the molecular structure of gelatin from various sources. Irradiation for 2 h yielded the highest gel strength and melting peak temperature, and the lowest chromatic aberration.

The functional properties of chitosan-glucose-asparagine Maillard reaction products and mitigation of acrylamide formation by chitosans.

This research aims to clarify the interactions that occur in a food model system consisting of glucose, asparagine and chitosans. Low molecular weight chitosan exerted a potent inhibitory effect (46.8%) on acrylamide and Maillard reaction products (MRPs) (>52.6%), respectively. Compared to a previous study conducted using the fructose system, the novel findings of this research demonstrate that the formation of acrylamide and Maillard reaction products was lower with glucose than with fructose when they were used as reducing sugars in food model systems.

Effect of different molecular weight chitosans on the mitigation of acrylamide formation and the functional properties of the resultant Maillard reaction products.

Mitigation of acrylamide formation and the functional properties of Maillard reaction products (MRPs) were investigated in a food model system. The system was composed of elements of mixtures and their combination including fructose, asparagine and different molecular weight chitosans. All solutions were heated, and then analyzed for acrylamide content, MRPs absorbance, pH, color, antioxidant capacity, antibacterial activity and kinematic viscosity. The fructose, asparagine and chitosan mixture had more MRPs compared to other mixtures. 1,1-Diphenyl-2-pricrylhydrazy (DPPH) radical scavenging activities, ferrous ion chelating abilities and reducing power results showed that all solutions containing a combination of two or three reactants had antioxidant capacities. Acrylamide content has a positive correlation with absorbance values at OD294 and OD420 but a negative correlation with the CIB L(∗) value of a solution (p<0.01). Experimental results evidenced that low molecular weight (50-190 kDa) chitosan can be used to mitigate the formation of acrylamide.

Effects of calcium supplements on the quality and acrylamide content of puffed shrimp chips.

The quality and acrylamide content of deep-fried and microwave-puffed shrimp chips fortified with 0.1%, 0.5%, or 1.0% calcium salts (calcium lactate, calcium carbonate, calcium citrate, or calcium acetate) were investigated. Microwave-puffed shrimp chips contained higher amounts of acrylamide (130.43 ppb) than did deep-fried shrimp chips. The greatest mitigation of acrylamide formation in overfried chips was obtained with 0.1% calcium lactate. All browning indexes of fortified shrimp chips, whether deep-fried or microwave-puffed, were reduced. L* values of microwave-puffed shrimp chips were higher than those of deep-fried shrimp chips, whereas a* and b* values and browning indexes were lower. Color differences (ΔE) between deep-fried puffed shrimp chips fortified with calcium salts and a control sample were higher than 5, and the sensory scores of shrimp chips were significantly decreased by the addition of calcium lactate.