Biodegradation of Congo Red Dye Using Lysinibacillus Species in a Moving Bed Biofilm Reactor: Continuous Study and Kinetic Evaluation.

The objective of this work was to develop a low-cost and efficient biocarrier for biodegradation of azo dye (i.e., Congo red (CR) dye). The potential bacterial species, i.e., Lysinibacillus fusiformis KLM1 and Lysinibacillus macrolides KLM2, were isolated from the dye-contaminated site. These bacterial species were immobilized onto the polypropylene-polyurethane foam (PP-PUF) and employed in a moving bed biofilm reactor (MBBR) for the treatment of CR dye. The effectiveness of the MBBR was investigated by operating the bioreactor in a continuous mode at various initial CR dye concentrations (50-250 mg/L) for 113 days. The removal efficiency was found in the range of 88.4-64.6% when the initial dye concentration was varied from 50 to 250 mg/L. The maximum elimination capacity (EC) of 213.18 mg/L.d was found at 250 mg/L of CR dye concentration. In addition, the CR dye utilization rate in the MBBR was studied by using two kinetics, namely, first-order and second-order (Grau) models. The high regression coefficients (R2 > 0.97) and the satisfactory root mean square (RMSE) values (0.00096-0.02610) indicated the reasonable prediction of CR dye degradation rate by the Grau model.

The Biodegradation of 4-Chlorophenol in a Moving Bed Biofilm Reactor Using Response Surface Methodology: Effect of Biogenic Substrate and Kinetic Evaluation.

4-Chlorophenol (4-CP) is a persistent organic pollutant commonly found in petrochemical effluents. It causes toxic, carcinogenic and mutagenic effects on human beings and aquatic lives. Therefore, an environmentally benign and cost-effective approach is needed against such pollutants. In this direction, the chlorophenol degrading bacterial consortium consisting of Bacillus flexus GS1 IIT (BHU) and Bacillus cereus GS2 IIT (BHU) was isolated from a refinery site. A composite biocarrier namely polypropylene-polyurethane foam (PP-PUF) was developed for bacterial cells immobilization purpose. A lab-scale moving bed biofilm reactor (MBBR) packed with Bacillus sp. immobilized PP-PUF biocarrier was employed to analyse the effect of peptone on biodegradation of 4-CP. The statistical tool, i.e. response surface methodology (RSM), was used to optimize the process variables (4-CP concentration, peptone concentration and hydraulic retention time). The higher values of peptone concentration and hydraulic retention time were found to be favourable for maximum removal of 4-CP. At the optimized process conditions, the maximum removals of 4-CP and chemical oxygen demand (COD) were obtained to be 91.07 and 75.29%, respectively. In addition, three kinetic models, i.e. second-order, Monod and modified Stover-Kincannon models, were employed to investigate the behaviour of MBBR during 4-CP biodegradation. The high regression coefficients obtained by the second-order and modified Stover-Kincannon models showed better accuracy for estimating substrate degradation kinetics. The phytotoxicity study supported that the Vigna radiata seeds germinated in treated wastewater showed higher growth (i.e. radicle and plumule) than the untreated wastewater.

Effect of mixing intensity on biodegradation of phenol in a moving bed biofilm reactor: Process optimization and external mass transfer study.

In this work, an effort has been made to design the process variables and to analyse the impact of mixing intensity on mass transfer diffusion in a moving bed biofilm reactor (MBBR). A lab-scale MBBR, filled with Bacillus cereus GS2 IIT (BHU) immobilized-polyethylene biocarriers, was employed to optimize the process variables, including mixing intensity (60-140 rpm), phenol concentration (50-200 mg/L), and hydraulic retention time (HRT) (4-24 h) using response surface methodology. The optimum phenol removal of 87.64 % was found at 100 rpm of mixing intensity, 200 mg/L of phenol concentration, and 24 h of HRT. The higher mixing intensity improved the substrate diffusion between the liquid phase and the surface of the biofilm. The external mass transfer coefficients were found in the range of 1.431 × 10-5-1.845 × 10-5 m/s. Moreover, the detection of catechol and 2-hydroxymuconic semialdehyde revealed that the Bacillus sp. followed the meta-cleavage pathway during the biodegradation of phenol.

Biodegradation of Congo red dye using polyurethane foam-based biocarrier combined with activated carbon and sodium alginate: Batch and continuous study.

Dyes are an important class of organic pollutants and are well known for their adverse effects on aquatic life and human beings. In this work, an effort has been made to treat the dye-containing wastewater using modified biocarriers in packed bed bioreactors (PBBRs). Lysinibacillus sp. immobilized polyurethane foam combined with activated carbon and sodium alginate was used for the biodegradation of Congo red dye. The optimum values of process time, glucose concentration, and dye concentration were obtained to be 4.0 days, 2.0 g/L, and 50 mg/L, respectively. The maximum dye removal efficiency (RE) of 92.63 % was obtained at the optimized conditions. The continuous PBBR offered a maximum RE and elimination capacity of 90.73% and 10.89 mg/L. d, respectively, at an inlet loading rate of 12 mg/L. d. Moreover, the growth kinetic of Lysinibacillus sp. was well predicted by the Andrew-Haldane model with a regression coefficient of 0.98.

Collective removal of phenol and ammonia in a moving bed biofilm reactor using modified bio-carriers: Process optimization and kinetic study.

The performance of a moving bed biofilm reactor (MBBR) with bio-carriers made of polypropylene-polyurethane foam (PP-PUF) was evaluated for the collective removal of phenol and ammonia. Three independent variables, including pH (5.0-8.0), retention time (2.0-12.0 h), and airflow rate (0.8-3.5 L/min) were optimized using central composite design (CCD) of response surface methodology (RSM). The maximum removal of phenol and ammonia was obtained to be 92.6, and 91.8%, respectively, in addition to the removal of 72.3% in the chemical oxygen demand (COD) level at optimum conditions. First-order and second-order kinetic models were analyzed to evaluate the pollutants removal kinetics in a MBBR. Finally, a second-order model was found to be appropriate for predicting reaction kinetics. The values of second-order rate constants were obtained to be 2.35, 0.25, and 1.85 L2/gVSS gCOD h for phenol, COD, and ammonia removal, respectively.

Biodegradation of Congo red dye in a moving bed biofilm reactor: Performance evaluation and kinetic modeling.

The biodegradation of Congo red dye was performed using polyurethane foam-polypropylene immobilized Bacillus sp. MH587030.1 in a moving bed biofilm reactor (MBBR). The central composite design (CCD) based response surface methodology (RSM) was used to optimize the process parameters; pH, Congo red concentration, and media filling ratio, and optimum conditions were observed to be 7.0, 50 mg/L, and 45%, respectively in batch MBBR. At optimum condition, MBBR was operated in continuous mode at different flow rates (25-100 mL/h) over a period of 564 h. The maximum removal efficiency (RE) and elimination capacity (EC) were obtained as 95.7% and 57.6 mg/L·day, respectively under steady-state. The kinetics of Congo red biodegradation at various flow rates were evaluated by a modified Stover-Kincannon model, and kinetic constants; KB and Umax were found to be 0.253 g/L·day and 0.263 g/L·day, respectively.

Development of Moxifloxacin Hydrochloride loaded in-situ gel for the treatment of periodontitis: In-vitro drug release study and antibacterial activity.

Periodontitis is one of the most widespread oral diseases. Medicated in-situ gels of Moxifloxacin Hydrochloride for extended period of retention in infected cavity were prepared for improved local action for the treatment of periodontitis. Medicated formulations were prepared using temperature sensitive (poloxamer 407), ion sensitive (gellan gum) and pH sensitive (carbopol 934P) polymers. 32 Full Factorial Design has been applied and prepared batches were characterized by FTIR, pH, syringeability, drug content, clarity, gelation temperature, gelling time, in-vitro gelling capacity, in-vitro diffusion study. Gelation temperature, (in-vitro) gelling time and the nature of gel formed in simulated saliva showed polymeric concentration dependency. Diffusion study of in-situ gel had been performed which showed augmented arrival of medication from 7-12 hours and the discharge was dependent on polymer utilized. The best fitted model was zero order kinetics which indicated that the formulation gave controlled delivery. All preparations were non-Newtonian and display pseudoplastic conduct. Invitro Antimicrobial study was carried out by utilizing E. coli and S. aureus. Optimized formulation containing 19.072 %w/v poloxamer 407 and 0.245 %w/v gellan gum exhibited desired characteristics for developing periodontal drug delivery systems.

A novel comparative study of modified carriers in moving bed biofilm reactor for the treatment of wastewater: Process optimization and kinetic study.

In this work, modified plastic carriers; polypropylene (PP), low-density polyethylene- polypropylene (LDPE-PP), and polyurethane foam-polypropylene (PUF-PP) were developed and used in moving bed bioreactor (MBBR) for the wastewater treatment containing naphthalene. To optimized the process parameters using response surface methodology (RSM), two numerical variables; pH (5.0-9.0) and hydraulic retention time (HRT) (1.0-5.0 day) along with the type of carriers (PP, LDPE-PP, and PUF-PP) were selected as a categorical factor. At 7.0 pH and 5 days HRT, maximum removal efficiencies were observed to be 72.4, 84.4, and 90.2% for MBBR packed with PP, LDPE-PP, and PUF-PP carriers, respectively. Gas chromatography-mass spectrometry (GC-MS) analysis reveals catechol and 2-naphthol were observed as intermediate metabolites for naphthalene degradation. Modified Stover-Kincannon model was applied for biodegradation kinetic and constants were observed as Umax: 0.476, 0.666, and 0.769 g/L.day and KB: 0.565, 0.755, and 0.874 g/L.day for PP, LDPE-PP, PUF-PP, respectively.